zbled Apprentice
Joined: 18 Jun 2002 Posts: 216 Location: Bukowski's Piano Bar
|
Posted: Sun Nov 24, 2002 9:52 pm Post subject: Problems with cdrecord |
|
|
Hi everybody,
I tried to record a cd with cdrecord, but it didn't work:
here are the logs:
Quote: |
root@nix zbled # cdrecord -scanbus
Cdrecord 1.11a39 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) 'PLEXTOR ' 'CD-R PX-W1610A' '1.05' Removable CD-ROM
cdrecord: Warning: controller returns wrong size for CD capabilities page.
0,1,0 1) 'ATAPI-CD' 'ROM-DRIVE-52MAX ' '52BE' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
root@nix zbled # cdrecord dev=0,0,0 -dao /home/brennen/test.avi
Cdrecord 1.11a39 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W1610A'
Revision : '1.05'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Starting to write CD/DVD at speed 16 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 01 7A 6B 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 03 00 01 7B 03 0A 00 00 00 00 0C 09 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0
Sense flags: Blk 97027 (valid)
cmd finished after 0.000s timeout 200s
write track data: error after 198400000 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
cdrecord: Input/output error. flush cache: scsi sendcmd: no error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 200s
Trouble flushing the cache
|
I have really no idea, what I'm doing wrong :(
thanks in advance for your help |
|