| View previous topic :: View next topic |
| Author |
Message |
soNNe
n00b
Joined: 26 May 2003
Posts: 64
Location: Odense, Denmark
|
 Posted: Wed Aug 04, 2004 8:03 pm Post subject: Xorg and 865G Intel Extreme Graphics |
 |
|
I don't have 3d acceleration with my onboard extreme graphics, and i wanted to know if it is possible to have?
I am running the latest xorg marked ~x86 and the 2.6.7r1 kernel.
Are there anybody who has this gfx card working with hardware 3d acceleration? |
|
| Back to top |
|
 |
st.tux
n00b
Joined: 20 Oct 2004
Posts: 2
Location: ...
|
| Posted: Wed Oct 20, 2004 6:00 pm Post subject: |
|
|
I was able to work with 3d acceleration using xfree-4.3 and 2.4.26-gentoo-r6.
When i shifted to xorg that uses x11-drm... I could not able to pull it off.  |
|
| Back to top |
|
|
paolo
l33t
Joined: 23 Jul 2002
Posts: 768
Location: SBT (AP)
|
| Posted: Tue Oct 26, 2004 6:33 pm Post subject: |
|
|
resolved using the i915 module in the new 2.6.9 kernel.
Neither the patch to 2.6.8 nor the x11-drm managed to work for me.
Now I get 2000FPS with 100% cpu utilization (Acer TMLCi: Centrino 1,3G & 855GM)
_________________
Nihil sine magno labore |
|
| Back to top |
|
|
jaalex
n00b
Joined: 22 Oct 2003
Posts: 39
|
| Posted: Wed Oct 27, 2004 4:02 pm Post subject: Help |
|
|
What did you do to use that kernel module. I'm running the 2.6.9-gentoo-r1 kernel and have asked it to build the i915 module. I did a modprobe to insert that module into the kernel but I still can't get Xorg working. Can you post your Xorg.conf or point me in the correct direction
_________________
No Matter Where You Go, There You Are |
|
| Back to top |
|
|
paolo
l33t
Joined: 23 Jul 2002
Posts: 768
Location: SBT (AP)
|
| Posted: Thu Oct 28, 2004 11:55 pm Post subject: |
|
|
To obtain the config I've used "xorgconfig"...
Let's give it a try or I'll post my simple config.
_________________
Nihil sine magno labore |
|
| Back to top |
|
|
Voltago
Advocate
Joined: 02 Sep 2003
Posts: 2593
Location: userland
|
| Posted: Fri Oct 29, 2004 12:14 am Post subject: |
|
|
| paolo wrote: |
Now I get 2000FPS with 100% cpu utilization (Acer TMLCi: Centrino 1,3G & 855GM) |
If you are using glxgears for benchmarking, then please do post your xorg.conf. I get arond 700 FPS on a 1.7 GHz Centrino machine, and I'm beginning to think that I have missed something important in my config... Thanks in advance! |
|
| Back to top |
|
|
paolo
l33t
Joined: 23 Jul 2002
Posts: 768
Location: SBT (AP)
|
| Posted: Fri Oct 29, 2004 8:09 am Post subject: |
|
|
| Voltago wrote: |
If you are using glxgears for benchmarking, then please do post your xorg.conf. I get arond 700 FPS on a 1.7 GHz Centrino machine, and I'm beginning to think that I have missed something important in my config... Thanks in advance! |
Exc me for the misunderstood: 100% cpu means that the gears' window is covered  I got ~1070FPS with 60% cpu utilization and the window completly visible. BTW 1070 is greater than 700... Now I'm at work: at home I'll post my simple config.
_________________
Nihil sine magno labore |
|
| Back to top |
|
|
paolo
l33t
Joined: 23 Jul 2002
Posts: 768
Location: SBT (AP)
|
| Posted: Sat Oct 30, 2004 12:16 pm Post subject: |
|
|
| Code: |
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "glx"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" True
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "i810"
VendorName "Intel Corp."
BoardName "82852/855GM Integrated Graphics Device"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
|
_________________
Nihil sine magno labore |
|
| Back to top |
|
|
outspoken
Guru
Joined: 14 Feb 2004
Posts: 464
Location: orlando, fl
|
| Posted: Wed Mar 16, 2005 9:26 pm Post subject: |
|
|
I'm only getting 40fps with fullwindow glxgears.
I've got an Intel 865G with 16MB reserved.
here is my xorg.conf:
| Code: |
Section "Module"
Load "extmod"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "glx"
Load "type1"
Load "freetype"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "planar"
HorizSync 31.5 - 64.3
VertRefresh 50-70
EndSection
Section "Device"
Identifier "Card0"
Driver "i810"
Videoram 16252
EndSection
Section "Screen"
Identifier "Screen 1"
Device "Card0"
Monitor "planar"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
|
nothing too special here. however I have these items in my /var/log/Xorg.0.log:
| Code: |
(EE) I810(0): Failed to allocate Overlay register space.
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(WW) I810(0): Bad V_BIOS checksum
*(WW) (1600x1200,planar) mode clock 162MHz exceeds DDC maximum 130MHz
(WW) (1600x1200,planar) mode clock 175.5MHz exceeds DDC maximum 130MHz
(WW) (1600x1200,planar) mode clock 189MHz exceeds DDC maximum 130MHz
(WW) (1600x1200,planar) mode clock 202.5MHz exceeds DDC maximum 130MHz
(WW) (1600x1200,planar) mode clock 229.5MHz exceeds DDC maximum 130MHz
*(WW) (1920x1440,planar) mode clock 234MHz exceeds DDC maximum 130MHz
(WW) (1920x1440,planar) mode clock 297MHz exceeds DDC maximum 130MHz
(WW) (1920x1440,planar) mode clock 341.35MHz exceeds DDC maximum 130MHz
(WW) I810(0): config file vrefresh range 50-70Hz not within DDC vrefresh ranges.
(WW) (1280x1024,planar) mode clock 135MHz exceeds DDC maximum 130MHz
(WW) (1280x1024,planar) mode clock 157.5MHz exceeds DDC maximum 130MHz
(WW) I810(0): Bad V_BIOS checksum
(WW) I810(0): Disabling Xv because the overlay register buffer allocation failed.
(WW) I810(0): Extended BIOS function 0x5f05 not supported.
(WW) I810(0): Extended BIOS function 0x5f28 not supported.
(WW) I810(0): Extended BIOS function 0x5f61 not supported.
|
|
|
| Back to top |
|
|
guni
Apprentice
Joined: 18 May 2003
Posts: 193
Location: Belgium lommel
|
| Posted: Fri Mar 18, 2005 2:02 am Post subject: |
|
|
| paolo wrote: | resolved using the i915 module in the new 2.6.9 kernel.
Neither the patch to 2.6.8 nor the x11-drm managed to work for me.
Now I get 2000FPS with 100% cpu utilization (Acer TMLCi: Centrino 1,3G & 855GM) |
I did the same as u did and on a centrino 1.4 with a resolution of 1024x768 i get around 1100fps.
Here is my conf if u are interested http://users.skynet.be/janszke/Linux/xorg.conf |
|
| Back to top |
|
|
paolo
l33t
Joined: 23 Jul 2002
Posts: 768
Location: SBT (AP)
|
| Posted: Fri Mar 18, 2005 9:42 am Post subject: |
|
|
| paolo wrote: |
Exc me for the misunderstood: 100% cpu means that the gears' window is covered I got ~1070FPS with 60% cpu utilization and the window completly visible. BTW 1070 is greater than 700... Now I'm at work: at home I'll post my simple config. |
_________________
Nihil sine magno labore |
|
| Back to top |
|
|
|
Kernel & Hardware
