| View previous topic :: View next topic |
| Author |
Message |
thelusiv
n00b
Joined: 08 Aug 2004
Posts: 10
|
 Posted: Sun Aug 08, 2004 6:41 pm Post subject: Problems with Pixelview PlayTV Pro, lm-sensors & kernel |
 |
|
I am trying to set up a machine a built some time ago to do simple TV tuning with tvtime. I would also like to use the hardware sensors on my AMD Irongate 751 chipset.
Whenever I try to load the bttv modules i get:
| Code: | # modprobe bttv tuner type=2 card=37 radio=1
WARNING: Error inserting btcx_risc (/lib/modules/2.6.7-gentoo-r11/kernel/drivers/media/video/btcx-risc.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting v4l2_common (/lib/modules/2.6.7-gentoo-r11/kernel/drivers/media/video/v4l2-common.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting video_buf (/lib/modules/2.6.7-gentoo-r11/kernel/drivers/media/video/video-buf.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting bttv (/lib/modules/2.6.7-gentoo-r11/kernel/drivers/media/video/bttv.ko): Unknown symbol in module, or unknown parameter (see dmesg) |
dmesg:
| Code: | Linux video capture interface: v1.00
btcx_risc: Unknown symbol cleanup_module
v4l2_common: Unknown symbol cleanup_module
video_buf: Unknown symbol cleanup_module
bttv: Unknown symbol videobuf_streamoff
bttv: Unknown symbol videobuf_poll_stream
bttv: Unknown symbol videobuf_read_stop
bttv: Unknown symbol videobuf_alloc
bttv: Unknown symbol i2c_bit_add_bus
bttv: Unknown symbol v4l2_prio_max
bttv: Unknown symbol videobuf_dma_pci_unmap
bttv: Unknown symbol videobuf_dma_free
bttv: Unknown symbol v4l2_prio_change
bttv: Unknown symbol videobuf_reqbufs
bttv: Unknown symbol btcx_sort_clips
bttv: Unknown symbol videobuf_waiton
bttv: Unknown symbol videobuf_queue_is_busy
bttv: Unknown symbol videobuf_dqbuf
bttv: Unknown symbol btcx_screen_clips
bttv: Unknown symbol btcx_align
bttv: Unknown symbol v4l2_video_std_construct
bttv: Unknown symbol videobuf_queue_init
bttv: Unknown symbol btcx_calc_skips
bttv: Unknown symbol v4l2_type_names
bttv: Unknown symbol v4l2_field_names
bttv: Unknown symbol v4l2_prio_check
bttv: Unknown symbol btcx_riscmem_alloc
bttv: Unknown symbol btcx_riscmem_free
bttv: Unknown symbol videobuf_read_stream
bttv: Unknown symbol i2c_bit_del_bus
bttv: Unknown symbol videobuf_querybuf
bttv: Unknown symbol videobuf_dma_pci_sync
bttv: Unknown symbol v4l2_prio_close
bttv: Unknown symbol videobuf_qbuf
bttv: Unknown symbol v4l2_prio_init
bttv: Unknown symbol videobuf_read_one
bttv: Unknown symbol v4l2_ioctl_names
bttv: Unknown symbol videobuf_iolock
bttv: Unknown symbol videobuf_streamon
bttv: Unknown symbol videobuf_mmap_setup
bttv: Unknown symbol v4l2_prio_open
bttv: Unknown symbol videobuf_next_field
bttv: Unknown symbol videobuf_mmap_mapper |
when i ran sensors-detect it told me to use the following commands to load lm-sensors:
| Code: | # I2C adapter drivers
modprobe i2c-amd756
# I2C chip drivers
modprobe eeprom
# sleep 2 # optional
/usr/bin/sensors -s # recommended |
when i run these commands, everything is fine except 'modprobe eeprom'. relevent dmesg:
| Code: | i2c_sensor: Unknown symbol cleanup_module
eeprom: Unknown symbol i2c_detect |
it seems to me like there's something missing from my kernel. cleanup_module is in many of the modules...However I'm fairly sure my kernel is OK. Here is the I2C setup portion:
| Code: | # I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y |
Multimedia/video stuff:
| Code: | #
# Video For Linux
#
#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m |
Any ideas as to what I'm leaving out? I have tried compiling most of these things that are compiled as modules into the kernel with no better results. Thanks,
chris |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Multimedia
