View previous topic :: View next topic |
Author |
Message |
mysz Tux's lil' helper
Joined: 24 Jun 2004 Posts: 87
|
Posted: Fri Sep 10, 2004 12:20 pm Post subject: xorg-x11 6.8.0 + xmms |
|
|
po emergowaniu nowych Xow zauwazylem, ze xmms stracil swoje dotychczasowe ladne fonty w menu i w opcjach, a zamiast nich pojawily sie jakies brzydkie, postrzepione kulfony
wszystkie programy jakos nie maja problemow z czcionkami, poza xmmsem...
jak moge ustawic w nim jakas normalna aa czcionke w menu? |
|
Back to top |
|
|
skiera Tux's lil' helper
Joined: 08 Mar 2004 Posts: 134 Location: Poland -> Wałcz
|
Posted: Fri Sep 10, 2004 1:52 pm Post subject: |
|
|
Też wlasnie zemergowalem xorga, wczesniej uzywalem xfree. U mnie w kilku programach wystąpił ten problem. Okazało się że brakowało ścieżki do fontów. Wystarczyło w konfiguracji xorga podać odpowiednie ścieżki do fontów.. |
|
Back to top |
|
|
Poe Bodhisattva
Joined: 03 Apr 2004 Posts: 2155 Location: Mysłowice/Lublin, Poland
|
Posted: Fri Sep 10, 2004 2:21 pm Post subject: |
|
|
skiera wrote: | Też wlasnie zemergowalem xorga, wczesniej uzywalem xfree. U mnie w kilku programach wystąpił ten problem. Okazało się że brakowało ścieżki do fontów. Wystarczyło w konfiguracji xorga podać odpowiednie ścieżki do fontów.. |
No tak, bo ty się przesiadłes dopiero z XFree, a przesiadajac sie na Xorga trzeba zmienic sciezki bo sa inne, ale Mysz chyba ma juz dłuzej X.orga wiec sciezki ma dobre.. no chyba ze tez sie przesiadał na Xorga to wtedy jest to problem sciezek, ale tak to nie w tym tkwi problem na 99% _________________ Hardware:HP Pavilion DV6875SE[C2DT5550@1.83GHz_3GB-DDR2_320GB-SATA_GF8400GS]
http://popularcoffee.blogspot.com - Popkulturowa Kawa
RLU#342333 |
|
Back to top |
|
|
swami Tux's lil' helper
Joined: 06 Aug 2004 Posts: 82 Location: Poland
|
Posted: Fri Sep 10, 2004 2:42 pm Post subject: Re: xorg-x11 6.8.0 + xmms |
|
|
mysz wrote: | po emergowaniu nowych Xow zauwazylem, ze xmms stracil swoje dotychczasowe ladne fonty w menu i w opcjach, a zamiast nich pojawily sie jakies brzydkie, postrzepione kulfony
wszystkie programy jakos nie maja problemow z czcionkami, poza xmmsem...
jak moge ustawic w nim jakas normalna aa czcionke w menu? |
U mnie bez zmian (przejscie z 6.7.0-r"costam" na 6.8.0). |
|
Back to top |
|
|
mysz Tux's lil' helper
Joined: 24 Jun 2004 Posts: 87
|
Posted: Fri Sep 10, 2004 3:03 pm Post subject: |
|
|
hm, no wlasnie xorga uzywam od dluzszego czasu, wiec to nie jest kwestia odpowiednich sciezek do fontów
/edit/
generalnie to moglbym to calkowicie olac i przesiasc sie na beep-media-playera, tylko z nim z kolei tez jest problem, poniewaz gdy chce przesunac okno, klikam na niego, przesuwam mysza, ale samo okno ma jakies 2sek opoznienia przy przesuwaniu...
poza tym bmp nie wspolpracuje zbyt dobrze z madman'em...
ehh, takie to zycie ciezkie... |
|
Back to top |
|
|
larry_ n00b
Joined: 31 May 2004 Posts: 23 Location: Poland - Ostrów Wielkopolski
|
Posted: Sat Sep 11, 2004 11:50 am Post subject: X.org 6.8.0 i GLX |
|
|
Jak już piszecie o X.org 6.8.0 to może mi ktoś wyjaśnić co jest źle jesli nie ładuje mi GLX ( mam sterowniki Nvidia 1.0-4363, na ktorych dzialalo na X.org 6.7.0 bez problemu - nowszych tez probowałem np. 1.0- 6111 - uzywam ze względu na zwisy). Np. chce odpalić xmmsa to dostaje:
xmms
Xlib: extension "GLX" missing on display ":0.0".
** CRITICAL **: opengl_spectrum.c: unable to create window
Gdk-ERROR **: BadMatch (invalid parameter attributes)
serial 219 error_code 8 request_code 2 minor_code 0
config jes tu :
http://rafb.net/paste/results/R8LD2G20.html
Przy starcie wywala mi tez:
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
dlopen: /usr/lib/opengl/nvidia/lib/libGLcore.so.1: undefined symbol: glVertexWeightfEXT
(EE) Failed to load /usr/X11R6/lib/modules/extensions/libglx.so
(II) UnloadModule: "glx"
(EE) Failed to load module "glx" (loader failed, 7)
Pozdrawiam. |
|
Back to top |
|
|
swami Tux's lil' helper
Joined: 06 Aug 2004 Posts: 82 Location: Poland
|
Posted: Sat Sep 11, 2004 2:58 pm Post subject: Re: X.org 6.8.0 i GLX |
|
|
larry_ wrote: | Jak już piszecie o X.org 6.8.0 to może mi ktoś wyjaśnić co jest źle jesli nie ładuje mi GLX ( mam sterowniki Nvidia 1.0-4363, na ktorych dzialalo na X.org 6.7.0 bez problemu - nowszych tez probowałem np. 1.0- 6111 - uzywam ze względu na zwisy). Np. chce odpalić xmmsa to dostaje:
xmms
Xlib: extension "GLX" missing on display ":0.0".
** CRITICAL **: opengl_spectrum.c: unable to create window
Gdk-ERROR **: BadMatch (invalid parameter attributes)
serial 219 error_code 8 request_code 2 minor_code 0
config jes tu :
http://rafb.net/paste/results/R8LD2G20.html
Przy starcie wywala mi tez:
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
dlopen: /usr/lib/opengl/nvidia/lib/libGLcore.so.1: undefined symbol: glVertexWeightfEXT
(EE) Failed to load /usr/X11R6/lib/modules/extensions/libglx.so
(II) UnloadModule: "glx"
(EE) Failed to load module "glx" (loader failed, 7)
Pozdrawiam. |
opengl-update |
|
Back to top |
|
|
larry_ n00b
Joined: 31 May 2004 Posts: 23 Location: Poland - Ostrów Wielkopolski
|
Posted: Sat Sep 11, 2004 7:02 pm Post subject: |
|
|
Uruchamia się, ale jak zaladuje logo nvidia wychodzi i nie pozostawia nic w logach... |
|
Back to top |
|
|
Yaro Tux's lil' helper
Joined: 11 Sep 2004 Posts: 133 Location: Poland, Katowice
|
Posted: Sat Sep 11, 2004 9:56 pm Post subject: |
|
|
Witam wszystkich.
U mnie jest to samo, po zemergowaniu nowego xorga czcionki w xmms-ie i mplayerze sie pozmienialy i zamiast polskich znaków mam krzaczki. Postepowalem wedlug tej instrukcji http://gentoo-wiki.com/HOWTO_Xorg_and_Fonts.
Wiec czcionki w /etc/xorg.conf i /etc/fonts/local.conf mam chyba dobrze poustawiane (przynajmniej tak jak w powyzszym howto), utworzylem tez odpowiedni plik w katalogu usera (tak jak w howto) i nie dziala. Ale przegladajac Xorg.log zauwazylem:
Code: |
Could not init font path element /usr/share/fonts/CID/, removing from list!
Could not init font path element /usr/share/fonts/Speedo/, removing from list!
Could not init font path element /usr/share/fonts/local/, removing from list!
Could not init font path element /usr/share/fonts/util/, removing from list!
|
Zajrzalem do tych katalogów i pliki fonts.dir w tych katalogach oprócz /usr/share/fonts/Speedo sa puste. Czy tak ma byc? Moze to przez to jest ten problem. A jesli tak to co mam wpisac do tych plików? Prosze o pomoc. |
|
Back to top |
|
|
arsen Bodhisattva
Joined: 10 Apr 2004 Posts: 1803 Location: Tychy, Poland
|
Posted: Sun Sep 12, 2004 9:05 am Post subject: |
|
|
|
|
Back to top |
|
|
Yaro Tux's lil' helper
Joined: 11 Sep 2004 Posts: 133 Location: Poland, Katowice
|
Posted: Sun Sep 12, 2004 10:01 am Post subject: |
|
|
Mam zemergowane. Zapomniałem wspomnieć, mam wszystkie te czcionki zemergowane. Dla pewności reemergowałem i dalej to samo . Zauważyłem, że chyba też z tego powodu straciła mi się godzina w fvwm-crystal, zamiast niej mam puste okienko. Zegar kożysta z czcionki helvetica, to chyba coś z tym musi być nie tak. Ale nie wiem co z tym dalej począć . |
|
Back to top |
|
|
arsen Bodhisattva
Joined: 10 Apr 2004 Posts: 1803 Location: Tychy, Poland
|
Posted: Sun Sep 12, 2004 10:18 am Post subject: |
|
|
a przed tem miałeś xfree czy xorg ale w innej wersji ? i jeszcze wystaw gdzieś konfiga do xorg, może wtedy coś się namierzy. |
|
Back to top |
|
|
Yaro Tux's lil' helper
Joined: 11 Sep 2004 Posts: 133 Location: Poland, Katowice
|
Posted: Sun Sep 12, 2004 10:51 am Post subject: |
|
|
arsen^ wrote: | a przed tem miałeś xfree czy xorg ale w innej wersji ? i jeszcze wystaw gdzieś konfiga do xorg, może wtedy coś się namierzy. |
Wcześniej miałem xorg, ale jechałem na konfigu z xfree i wszystko działało, nawet nie zmieniałem ścieżek do czcionek, tylko teraz zemergowałem nowego xorga (z ~x86, bo mam to wpisane w make.conf) i przestało działać.
A oto mój xorg.conf:
Code: |
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/Speedo/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/artwiz/"
FontPath "/usr/share/fonts/corefonts/"
# FontPath "/usr/share/fonts/cyrillic/"
FontPath "/usr/share/fonts/encodings/"
FontPath "/usr/share/fonts/freefont/"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/terminus/"
FontPath "/usr/share/fonts/ttf-bitstream-vera/"
# FontPath "/usr/share/fonts/ukr/"
FontPath "/usr/share/fonts/unifont/"
FontPath "/usr/share/fonts/util/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pl"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-70
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** NVIDIA (generic) [nv]"
Driver "nvidia"
VideoRam 65536
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** NVIDIA (generic) [nv]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
|
|
|
Back to top |
|
|
nelchael Retired Dev
Joined: 20 Mar 2004 Posts: 1948 Location: /dev/drzewo
|
Posted: Sun Sep 12, 2004 10:53 am Post subject: |
|
|
Yaro wrote: |
A oto mój xorg.conf:
|
Juz tyle razy bylo o tym...:
Code: | cat <plik-konfiguracyjny> | grep -v '^#' | grep . |
To naprawde nie boli, a ulatwia zycie.
EDIT:
Zainteresuj sie XFS'em
Hehe...:
Code: | nelchael@nelchael$ ~$ cat e | wc -l
434
nelchael@nelchael$ ~$ cat e | grep -v '^#' | grep . | wc -l
96
nelchael@nelchael$ ~$ |
e to twoj xorg.conf mam nadzieje, ze roznica widoczna 22%... _________________ [color=gray:17697d0166]http://dev.gentoo.org/~nelchael/[/color:17697d0166]
[size=14:17697d0166]>> [b:17697d0166]Zasady na f.g.o->Polish[/b:17697d0166] <<[/size:17697d0166] |
|
Back to top |
|
|
Yaro Tux's lil' helper
Joined: 11 Sep 2004 Posts: 133 Location: Poland, Katowice
|
Posted: Sun Sep 12, 2004 11:34 am Post subject: |
|
|
nelchael wrote: | Yaro wrote: |
A oto mój xorg.conf:
|
Juz tyle razy bylo o tym...:
Code: | cat <plik-konfiguracyjny> | grep -v '^#' | grep . |
To naprawde nie boli, a ulatwia zycie.
EDIT:
Zainteresuj sie XFS'em
|
Ok, bede usuwal komentarze. Ale one sie moga przydac. Celowo ich nie usunalem bo moglem miec cos zakomentowane, co by pomoglo w rozwiazaniu problemu. Ale wiekszosc rzeczywiscie jest nie potrzebna . O tym XFSie to nie skumalem, sadzisz ze mam uszkodzony system plikow? |
|
Back to top |
|
|
arsen Bodhisattva
Joined: 10 Apr 2004 Posts: 1803 Location: Tychy, Poland
|
Posted: Sun Sep 12, 2004 11:37 am Post subject: |
|
|
xfs, jako x server font . zrób:
Code: |
/etc/init.d/xfs start
|
|
|
Back to top |
|
|
Yaro Tux's lil' helper
Joined: 11 Sep 2004 Posts: 133 Location: Poland, Katowice
|
Posted: Sun Sep 12, 2004 12:01 pm Post subject: |
|
|
arsen^ wrote: | xfs, jako x server font . zrób:
Code: |
/etc/init.d/xfs start
|
|
Dalej to samo . Juz tego wczesniej próbowalem, podczas ladowania jest wszystko ok. |
|
Back to top |
|
|
larry_ n00b
Joined: 31 May 2004 Posts: 23 Location: Poland - Ostrów Wielkopolski
|
Posted: Sun Sep 12, 2004 12:31 pm Post subject: |
|
|
A jeśli chodzi o mój problem to widzi ktoś jakieś rozwiązanie ??? |
|
Back to top |
|
|
nelchael Retired Dev
Joined: 20 Mar 2004 Posts: 1948 Location: /dev/drzewo
|
Posted: Sun Sep 12, 2004 1:13 pm Post subject: |
|
|
Yaro wrote: | arsen^ wrote: | xfs, jako x server font . zrób:
Code: |
/etc/init.d/xfs start
|
|
Dalej to samo . Juz tego wczesniej próbowalem, podczas ladowania jest wszystko ok. |
Ale FontPath musisz ustawic w xorg.conf dla XFS:
Code: | FontPath "unix/:-1" |
_________________ [color=gray:17697d0166]http://dev.gentoo.org/~nelchael/[/color:17697d0166]
[size=14:17697d0166]>> [b:17697d0166]Zasady na f.g.o->Polish[/b:17697d0166] <<[/size:17697d0166] |
|
Back to top |
|
|
Yaro Tux's lil' helper
Joined: 11 Sep 2004 Posts: 133 Location: Poland, Katowice
|
Posted: Sun Sep 12, 2004 2:52 pm Post subject: |
|
|
Quote: |
Ale FontPath musisz ustawic w xorg.conf dla XFS:
Code: | FontPath "unix/:-1" |
|
Dopisalem to do sekcji "Files", zrestartowalem xfs-a i dalej to samo . W przykladowym konfigu do xorg przeczytalem, ze jak sie to dopisuje to trzeba zakomentowac wszystkie inne czcionki, wiec spróbowalem i tak ale tez nie dziala.
EDIT1:
Doszedlem do tego, ze to na bank cos nie tak z czcionka helvetica, inne programy mi tez wypisuja ze nie moga jej zaladowac. Problem tylko w tym ze ja wszystkie czcionki emergowalem, a tej czcionki nie mam.
EDIT2:
dziala . Zrobilem to w troche dziwny sposób, mianowicie dokopiowalem odpowiednie czcionki od kumpla i juz jest wszystko dobrze. Tylko nie wiedziec czemu po zemergowaniu czcionek nie mialem czcionki helvetica i pewnie jakis innych tez. Jesli ktos ma pomysl jak to mozna normalnie zrobic to bylbym dzwieczny . Dzieki za pomoc.
Last edited by Yaro on Mon Sep 13, 2004 8:19 am; edited 3 times in total |
|
Back to top |
|
|
Yaro Tux's lil' helper
Joined: 11 Sep 2004 Posts: 133 Location: Poland, Katowice
|
Posted: Sun Sep 12, 2004 2:59 pm Post subject: |
|
|
larry_ wrote: | A jeśli chodzi o mój problem to widzi ktoś jakieś rozwiązanie ??? |
Spróbuj moze:
Code: | emerge nvidia-glx
opengl-update nvidia |
i restart x-ów. |
|
Back to top |
|
|
larry_ n00b
Joined: 31 May 2004 Posts: 23 Location: Poland - Ostrów Wielkopolski
|
Posted: Mon Sep 13, 2004 10:36 am Post subject: |
|
|
Wywaliłem stare nvidia-glx - kernel ktore mialem z portaga i zainstalowałem z paczki no i o dziwo ... działa. Dzieki. |
|
Back to top |
|
|
mkay Retired Dev
Joined: 01 May 2004 Posts: 471 Location: Poland / Katowice
|
Posted: Mon Sep 13, 2004 11:31 am Post subject: |
|
|
[quote="Yaro"] Quote: |
EDIT2:
dziala . Zrobilem to w troche dziwny sposób, mianowicie dokopiowalem odpowiednie czcionki od kumpla i juz jest wszystko dobrze. Tylko nie wiedziec czemu po zemergowaniu czcionek nie mialem czcionki helvetica i pewnie jakis innych tez. Jesli ktos ma pomysl jak to mozna normalnie zrobic to bylbym dzwieczny . Dzieki za pomoc. |
baaaaaardzo brzydkie obejscie problemu;/
Code: |
echo "x11-base/xorg-x11 bitmap-fonts" >>/etc/portage/package.use
emerge xorg-x11
|
tak to powinno wygladac _________________ "Life's a bitch and so am I, the world owes me, so fuck you." - Green Day
Linux registered user #316599
#gentoo.pl team |
|
Back to top |
|
|
Yaro Tux's lil' helper
Joined: 11 Sep 2004 Posts: 133 Location: Poland, Katowice
|
Posted: Mon Sep 13, 2004 1:44 pm Post subject: |
|
|
aye wrote: |
baaaaaardzo brzydkie obejscie problemu;/
Code: |
echo "x11-base/xorg-x11 bitmap-fonts" >>/etc/portage/package.use
emerge xorg-x11
|
tak to powinno wygladac |
Ja kompilowalem xorg-a z ta flaga, gdyby nie bylo wsparcia dla bitmap-fonts to by dokopiowanie czcionek nic nie dalo. Przynajmniej tak mi sie wydaje . |
|
Back to top |
|
|
changs n00b
Joined: 01 Jul 2004 Posts: 51 Location: Poland
|
Posted: Mon Sep 13, 2004 1:55 pm Post subject: Re: xorg-x11 6.8.0 + xmms |
|
|
mysz wrote: |
jak moge ustawic w nim jakas normalna aa czcionke w menu? |
IMHO Xmms nie obsluguje czcionek AA wiec to nie mozliwe
Xmms ssie
Joke |
|
Back to top |
|
|
|