| View previous topic :: View next topic |
| Author |
Message |
Ku8aZ
n00b
Joined: 14 Sep 2004
Posts: 19
Location: Olomouc district, Czech republic
|
 Posted: Thu Sep 16, 2004 1:25 pm Post subject: Synaptics/ALPS (might) touchpad doesn't work |
 |
|
Hello,
I have problem with my Synaptics Touchpad. It isn't detected and if I correct patches for detect it, my system freeze. Notebook is Premio 6010N (czech made in ATComputers), chassis is like this:
http://www.atcomp.cz/katalog/18409608/6010N_a3_hlava.jpg
datasheet /in czech  / http://www.atcomp.cz/katalog/18409608/Premio_6010N.pdf
After ALPS patch kernel says this:
| Code: | alps.c: E6 report: 00 00 64
alps.c: E7 report: 10 00 64
input: PS/2 Generic Mouse on isa0060/serio1
|
In Windows I normal install Synaptics drivers (find on ftp://ftp.atcomp.cz/notebooky/Premio/6010N)
In kernel (I think) 2.6.7-r11 it normally says !Synaptics! touchpad found + some detections, now it says (X.org.xonf):
| Code: | ...
(II) LoadModule: "synaptics"
(II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.o
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "synaptics"
(II) Reloading /usr/X11R6/lib/modules/input/synaptics_drv.o
...
(II) Synaptics touchpad driver version 0.13.5
SynapticsTouchpad no synaptics event device found (checked 5 nodes)
(**) Option "Device" "/dev/psaux"
(**) Option "SHMConfig" "on"
(**) Option "MaxTapTime" "20"
(**) Option "MaxTapMove" "220"
(**) Option "VertScrollDelta" "100"
(**) Option "UpDownScrolling" "on"
Query no Synaptics: 6003C8
(EE) SynapticsTouchpad no synaptics touchpad detected and no repeater device
(EE) SynapticsTouchpad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "SynapticsTouchpad"
(II) UnloadModule: "synaptics"
...
No core devices found!
|
When I edit alps.c file according to https://forums.gentoo.org/viewtopic.php?t=181269&highlight=alps+touchpad, then it found ALPS touchpad on event1, but it doesn't work (freezes) and my USB mouse works not so correctly. dmesg is full of messages:
| Code: | | psmouse.c: driver lost sync at byte 1 |
Please take a look on this error and help me, how I can goes my touchpad works. I now use PS/2 driver, but I'd like scroll or something else.
Thanks a lot, have a nice day.
Configuration:
Gentoo
xorg-x11-6.8.0
ATI kernel module (fglrx doesn't work with the newest xorg)
xorg.conf Touchpad section:
| Code: | Section "InputDevice"
Identifier "SynapticsTouchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
# Option "ZAxisMapping" "4 5"
Option "Protocol" "auto-dev"
# Option "LeftEdge" "120"
# Option "RightEdge" "830"
# Option "TopEdge" "120"
# Option "BottomEdge" "650"
Option "Edges" "1900 5400 1800 3900"
Option "Finger" "25 30"
# Option "FingerLow" "14"
# Option "FingerHigh" "15"
Option "MaxTapTime" "20"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
# Option "EmulateMidButtonTime" "75"
# Option "VertScrollDelta" "20"
# Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.02"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0007"
# Option "EdgeMotionMinSpeed" "15"
# Option "EdgeMotionMaxSpeed" "15"
Option "UpDownScrolling" "on"
# Option "CircularScrolling" "1"
# Option "CircScrollDelta" "0.1"
# Option "CircScrollTrigger" "2"
Option "SHMConfig" "on"
# Option "Repeater" "/dev/psaux"
EndSection
|
| Code: | cat /proc/bus/input/devices
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
H: Handlers=event0 kbd
B: EV=40001
B: SND=6
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse0 event1
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=event2 kbd
B: EV=120003
B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: LED=7
I: Bus=0003 Vendor=046d Product=c00e Version=1110
N: Name="Logitech USB-PS/2 Optical Mouse"
P: Phys=usb-0000:00:1d.0-2/input0
H: Handlers=mouse1 event3
B: EV=7
B: KEY=1f0000 0 0 0 0 0 0 0 0
B: REL=103
|
| Code: | cat /proc/bus/input/handlers
N: Number=0 Name=mousedev Minor=32
N: Number=1 Name=evdev Minor=64
N: Number=2 Name=kbd |
As Device and Protocol I tried to have anthing I found in manuals, how-tos and etc...
_________________
Radek Kubicek
student of Information Technology Fac. VUT Brno, Czech republic
e-mail: r.kubaz <AT> centrum <DOT> cz
Jabber1: kubaz@jabber.org
Jabber2: kubaz@jabber.cz
ICQ: 159481295
cell phone: +420777342655
Running on NB Premio 6010N |
|
| Back to top |
|
 |
dtor
Guru
Joined: 19 Jan 2004
Posts: 461
Location: Indiana, USA
|
| Posted: Thu Sep 16, 2004 6:57 pm Post subject: |
|
|
Try building psmouse as a module and reloading it after the box has finished bootin, then check dmesg if it has been identified as Synaptics.
_________________
Dmitry |
|
| Back to top |
|
|
Ku8aZ
n00b
Joined: 14 Sep 2004
Posts: 19
Location: Olomouc district, Czech republic
|
| Posted: Thu Sep 16, 2004 7:12 pm Post subject: |
|
|
| dtor wrote: | | Try building psmouse as a module and reloading it after the box has finished bootin, then check dmesg if it has been identified as Synaptics. |
You think after completely boot process, when I have qingy running? I started gpm during, so it maybe errors...
And I have to probe it with edited alps.c or not? Cause I have not identificationally one (according to table in alps.c)
_________________
Radek Kubicek
student of Information Technology Fac. VUT Brno, Czech republic
e-mail: r.kubaz <AT> centrum <DOT> cz
Jabber1: kubaz@jabber.org
Jabber2: kubaz@jabber.cz
ICQ: 159481295
cell phone: +420777342655
Running on NB Premio 6010N |
|
| Back to top |
|
|
dtor
Guru
Joined: 19 Jan 2004
Posts: 461
Location: Indiana, USA
|
| Posted: Thu Sep 16, 2004 7:21 pm Post subject: |
|
|
Boot into runlevel 3, log in as root on the first VT and do "rmmod pmouse; modprobe psmosue". Since you mention that in Windows it is identified as synaptics you do not need alps patch.
_________________
Dmitry |
|
| Back to top |
|
|
dtor
Guru
Joined: 19 Jan 2004
Posts: 461
Location: Indiana, USA
|
| Posted: Thu Sep 16, 2004 7:22 pm Post subject: |
|
|
Oh, wait.. That USB mouse - is in plugged in USB or PS/2 port?
Nevermind - i see it's in USB...
_________________
Dmitry |
|
| Back to top |
|
|
Ku8aZ
n00b
Joined: 14 Sep 2004
Posts: 19
Location: Olomouc district, Czech republic
|
| Posted: Thu Sep 16, 2004 7:42 pm Post subject: |
|
|
| dtor wrote: | Oh, wait.. That USB mouse - is in plugged in USB or PS/2 port?
Nevermind - i see it's in USB... |
Yes, USB mouse is in pure USB port...I don't understand above
| Code: | lsusb:
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 0483:1307 SGS Thomson Microelectronics Cytronix 6in1 card reader
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 046d:c00e Logitech, Inc. Optical Mouse
Bus 001 Device 001: ID 0000:0000 |
card reader is internal...
_________________
Radek Kubicek
student of Information Technology Fac. VUT Brno, Czech republic
e-mail: r.kubaz <AT> centrum <DOT> cz
Jabber1: kubaz@jabber.org
Jabber2: kubaz@jabber.cz
ICQ: 159481295
cell phone: +420777342655
Running on NB Premio 6010N |
|
| Back to top |
|
|
dtor
Guru
Joined: 19 Jan 2004
Posts: 461
Location: Indiana, USA
|
| Posted: Thu Sep 16, 2004 8:10 pm Post subject: |
|
|
| Ku8aZ wrote: | | dtor wrote: | Oh, wait.. That USB mouse - is in plugged in USB or PS/2 port?
Nevermind - i see it's in USB... |
Yes, USB mouse is in pure USB port...
|
That's what I figured when I took a second look at the /proc/bus/input/devices that you quoted.
Have you tried reloading the module? I think that "USB legacy emulation" gets in the way of Synaptics detection and if you reload psmouse after USB drivers requested BIOS handoff it (detection) should work just fine.
_________________
Dmitry |
|
| Back to top |
|
|
Ku8aZ
n00b
Joined: 14 Sep 2004
Posts: 19
Location: Olomouc district, Czech republic
|
| Posted: Fri Sep 17, 2004 11:12 am Post subject: |
|
|
| dtor wrote: | | Boot into runlevel 3, log in as root on the first VT and do "rmmod pmouse; modprobe psmosue". Since you mention that in Windows it is identified as synaptics you do not need alps patch. |
Thanks a lot, master  Now it works for my fully happiness I have to compile psmouse as a module and insert this line into my /etc/conf.d/local.start, cause /etc/modules.autoload.d/kernel-2.6 is probed before my USB (U use USB hotplug).
| Code: | | /sbin/modprobe psmouse |
Now it identifies my touchpad as Synaptics one and fully works. Only scrolling on USB mouse is gone....I tried to setup Mapping on 4 5 and 4 5 6 7 and still doesn't work.
I think, that's because of touchpad...how it correct?
_________________
Radek Kubicek
student of Information Technology Fac. VUT Brno, Czech republic
e-mail: r.kubaz <AT> centrum <DOT> cz
Jabber1: kubaz@jabber.org
Jabber2: kubaz@jabber.cz
ICQ: 159481295
cell phone: +420777342655
Running on NB Premio 6010N |
|
| Back to top |
|
|
dtor
Guru
Joined: 19 Jan 2004
Posts: 461
Location: Indiana, USA
|
| Posted: Fri Sep 17, 2004 2:08 pm Post subject: |
|
|
Hm, USB mouse and Synaptics should be fairly independent given that you are using them as separate input devices. Could you please post your entire XF86Config/XOrg.cong?
Btw, from what I see the tapping will not work for you as 20 msec is way too low for a tap (the value was good for older version of driver, see FAQ section here: http://w1.894.telia.com/~u89404340/touchpad/)
_________________
Dmitry |
|
| Back to top |
|
|
Ku8aZ
n00b
Joined: 14 Sep 2004
Posts: 19
Location: Olomouc district, Czech republic
|
| Posted: Fri Sep 17, 2004 9:48 pm Post subject: |
|
|
| dtor wrote: | | Hm, USB mouse and Synaptics should be fairly independent given that you are using them as separate input devices. Could you please post your entire XF86Config/XOrg.cong? |
Here is it: | Code: | # **********************************************************************
# Refer to the xorg.conf(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# DRI Sekce
# **********************************************************************
Section "DRI"
# OpenGL ICD pristupny vsem uzivatelum
Mode 0666
# OpenGL ICD je omezeny pro urcitou skupinu
# Group 100 # users
# Mode 0660
EndSection
# **********************************************************************
# Module sekce -- tato sekce je urcena pro specifikovani
# dynamicky nahravanych modulu
# **********************************************************************
#
Section "Module"
# dvojity buffer
Load "dbe"
# nahrati modulu extmod bez podpory pro rozsireni xfree86-dga
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
# rozsireni pro fonty
Load "type1"
Load "freetype"
Load "bitmap"
#Load "speedo"
#Load "xtt"
# moduly pro 3d akceleraci
Load "glx" # libglx.a
Load "dri" # libdri.a
# dalsi rozsireni
Load "record"
Load "extmod"
Load "synaptics"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
#FontPath "unix/:-1"
#FontPath "/usr/share/fonts/local/"
#FontPath "/usr/share/fonts/Speedo/"
#FontPath "/usr/share/fonts/CID/"
#FontPath "/usr/share/fonts/util/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf-bitstream-vera"
FontPath "/usr/share/fonts/corefonts"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/freefont"
FontPath "/usr/share/fonts/artwiz"
FontPath "/usr/share/fonts/terminus"
FontPath "/usr/share/fonts/unifont"
FontPath "/usr/share/fonts/vlastni"
# FontPath "/usr/local/share/fonts"
FontPath "/usr/share/fonts"
# FontPath "/usr/X11R6/lib/X11/fonts"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/util"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/ukr"
FontPath "/usr/share/fonts/afms"
# FontPath "/usr/X11R6/lib/X11/fonts/sharefont"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
Option "NoPM"
Option "Xinerama" "off"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard"
Driver "keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbModel" "pc102"
Option "XkbLayout" "cz_qwerty"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "SynapticsTouchpad"
Driver "synaptics"
Option "Device" "/dev/input/event1"
Option "Protocol" "auto-dev"
# Option "LeftEdge" "120"
# Option "RightEdge" "830"
# Option "TopEdge" "120"
# Option "BottomEdge" "650"
Option "Edges" "1900 5400 1800 3900"
Option "Finger" "25 30"
# Option "FingerLow" "14"
# Option "FingerHigh" "15"
Option "MaxTapTime" "200"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
# Option "EmulateMidButtonTime" "75"
# Option "VertScrollDelta" "20"
# Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.02"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0007"
# Option "EdgeMotionMinSpeed" "15"
# Option "EdgeMotionMaxSpeed" "15"
Option "UpDownScrolling" "on"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "SHMConfig" "on"
# Option "Repeater" "/dev/psaux"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5 6 7"
Option "Device" "/dev/misc/psaux"
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Option "Emulate3Buttons" "On"
# Option "Emulate3Timeout" "50"
# Option "ChordMiddle"
EndSection
Section "InputDevice"
Identifier "USBMouse"
Driver "mouse"
Option "Protocol" "PS/2"
Option "ZAxisMapping" "4 5 6 7"
Option "Device" "/dev/input/mice"
Option "ChordMiddle" "on"
EndSection
# **********************************************************************
# Monitor sekce
# **********************************************************************
#################################################
# nastaveni LCD panelu
#################################################
Section "Monitor"
Identifier "LCD"
HorizSync 27-90
VertRefresh 40-60
Option "DPMS" "True"
EndSection
#################################################
# nastaveni TV
#################################################
Section "Monitor"
Identifier "TV"
HorizSync 40-60
VertRefresh 50
Option "DPMS" "True"
Mode "1024x768"
DotClock 65
HTimings 1024 1188 1210 1370
VTimings 768 768 770 790
EndMode
Mode "1024x768i"
DotClock 45.00
HTimings 1024 1030 1230 1260
VTimings 768 768 790 830
Flags "Interlace"
EndMode
Mode "800x600"
DotClock 36.00
HTimings 800 818 820 960
VTimings 600 653 655 750
EndMode
Mode "640x480"
DotClock 25.175
HTimings 640 664 760 800
VTimings 480 491 493 525
EndMode
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# === ATI device section ===
Section "Device"
Identifier "ATI-ati"
Driver "ati"
Option "AGPMode" "4"
Option "EnablePageFlip" "True"
Option "IgnoreEDID" "Off"
VendorName "ATI Technologies Inc"
BoardName "Radeon R250 Lf [Radeon Mobility 9000 M9]"
BusID "PCI:1:0:0" # vendor=1002, device=4c66
Screen 0
# kvuli spatnemu xv vystupu v mplayeru
Option "XaaNoOffscreenPixmaps"
EndSection
Section "Device"
Identifier "ATI-fglrx"
Driver "fglrx"
# === Own Settings (CTh) ===
VideoRam 65536
Option "AGPMode" "4"
Option "AGPFastWrite" "True"
Option "EnablePageFlip" "True"
Option "CrtScreen" "True"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driverhas its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
###################################################################
# STV ... TV
# DVI ... DVI monitor
# LVDS ... display of notebook
# CRT ... CRT monitor
# AUTO ... atomatic choose (but if works... :-/ )
# NONE ... nothing
#----------------------------------------------------------------
# STV, LVDS ... TV Y, display X, video Y, overlay Y, scrolling Y
# STV, AUTO ... TV Y, display X, video N, overlay Y, scrolling X
# STV, NONE ... TV Y, display X, video N, overlay Y, scrolling X
# STV, STV ... TV Y, display X, video N, overlay Y, scrolling X
# AUTO, STV ... TV N, display Y, video Y, overlay Y, scrolling X
# AUTO, LVDS ... TV X, display Y, video Y, overlay Y, scrolling X
# AUTO, NONE ... TV N, display Y, video Y, overlay Y, scrolling X
# AUTO, AUTO ... TV N, display Y, video Y, overlay Y, scrolling X
# LVDS, STV ... TV N, display Y, video Y, overlay Y, scrolling X
# LVDS, AUTO ... TV N, display Y, video Y, overlay Y, scrolling X
# LVDS, NONE ... TV N, display Y, video Y, overlay Y, scrolling X
# NONE, AUTO ... TV X, display X, video X, overlay X, scrolling X
###################################################################
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
#Option "HSync2" "31.5 - 37.9"
#Option "VRefresh2" "60 - 75"
Option "HSync2" "31.5"
Option "VRefresh2" "20-60"
Option "ScreenOverlap" "0" # "0"
# === TV-out Management ===
Option "NoTV" "no"
Option "TVStandard" "PAL-D"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off" # "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "1"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
Option "TMDS" "on" # !!
Option "KernelModuleParm" "agplock=0"
BusID "PCI:1:0:0" # vendor=1002, device=4c66
Screen 0
# kvuli spatnemu xv vystupu v mplayeru
Option "XaaNoOffscreenPixmaps"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "Screen-ati"
Device "ATI-ati"
Monitor "LCD"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1400x1050" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
EndSubsection
EndSection
Section "Screen"
Identifier "Screen-fglrx"
Device "ATI-fglrx"
Monitor "LCD"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1400x1050" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
EndSubsection
EndSection
Section "Screen"
Identifier "Screen-TV"
Device "ATI-fglrx"
Monitor "TV"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1024x768" "1024x768i" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Notebook" # "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
#Screen "Screen-ati"
Screen "Screen-ati"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "SynapticsTouchpad" "CorePointer"
# InputDevice "Touchpad" "CorePointer"
InputDevice "Keyboard" "CoreKeyboard"
InputDevice "USBMouse" "SendCoreEvents"
EndSection
### EOF ### |
I use X.org ati drivers, cause fglrx doesn't work with the newest version (6.8.0)
I get that on my own Using value of 200 solves this Thanks for warning...
_________________
Radek Kubicek
student of Information Technology Fac. VUT Brno, Czech republic
e-mail: r.kubaz <AT> centrum <DOT> cz
Jabber1: kubaz@jabber.org
Jabber2: kubaz@jabber.cz
ICQ: 159481295
cell phone: +420777342655
Running on NB Premio 6010N |
|
| Back to top |
|
|
dtor
Guru
Joined: 19 Jan 2004
Posts: 461
Location: Indiana, USA
|
| Posted: Fri Sep 17, 2004 10:28 pm Post subject: |
|
|
Try changing the following in the InputDevice section for USBmouse:
| Code: |
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
|
Bare PS/2 protocol (the one that you have selected) does not support wheel.
Good luck!
_________________
Dmitry |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
