jonfr
Veteran
Joined: 20 Jul 2003
Posts: 1008
Location: Denmark
|
 Posted: Mon Sep 13, 2004 7:08 am Post subject: ffserver errors....can't connect to the server. |
 |
|
I am trying to setup an ffserver to stream 2 things. #1: My Tv card. #2: I also want to stream local files from my hard drive.
Here is my config file.
| Code: | # Port on which the server is listening. You must select a different
# port from your standard http web server if it is running on the same
# computer.
Port 8080
# Address on which the server is bound. Only useful if you have
# several network interfaces.
#BindAddress 192.168.1.7
# Number of simultaneous requests that can be handled. Since FFServer
# is very fast, it is more likely that you will want to leave this high
# and use MaxBandwidth, below.
MaxClients 1000
# This the maximum amount of kbit/sec that you are prepared to
# consume when streaming to clients
MaxBandwidth 1000
# Access Log file (uses standard Apache log file format)
# '-' is the standard output
CustomLog -
# Suppress that if you want to launch ffserver as a daemon
NoDaemon
##################################################################
# Definition of the live feeds. Each live feed contains one video
# and/or audio sequence coming from an ffmpeg encoder or another
# ffserver. This sequence may be encoded simultaneously with several
# codecs at several resolutions.
<Feed feed1.ffm>
# You must use 'ffmpeg' to send a live feed to ffserver. In this
# example, you can type:
#
# ffmpeg http://localhost:8080/feed1.ffm
# ffserver can also do time shifting. It means that it can stream any
# previously recorded live stream. The request should contain:
# "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify
# a path where the feed is stored on disk. You also specify the
# maximum size of the feed (100M bytes here). Default:
#File=/tmp/feed_name.ffm FileMaxSize=100M
File /tmp/feed1.ffm
FileMaxSize 200M
# You could specify
# ReadOnlyFile /saved/specialvideo.ffm
# This marks the file as readonly and it will not be deleted or updated
# Specify launch in order to start ffmpeg automatically
Launch
# Only allow connections from localhost to the feed
ACL allow 127.0.0.1
</Feed>
##################################################################
# Now you can define each stream which will be generated from the
# original audio and video stream. Each format has a filename (here
# 'test1.mpg'). FFServer will send this stream when answering a
# request containing this filename.
<Stream test1.mpg>
# coming from live feed 'feed1'
Feed feed1.ffm
# Format of the stream : you can choose among:
# mpeg : MPEG1 multiplexed video and audio
# mpegvideo : only MPEG1 video
# mp2 : MPEG2 audio (use AudioCodec to select layer 2 and 3 codec)
# ogg : Ogg format (Vorbis audio codec)
# rm : Real Networks compatible stream. Multiplexed audio and video.
# ra : Real Networks compatible stream. Audio only.
# mpjpeg : Multipart JPEG (works with Netscape without any plugin)
# jpeg : Generate a single JPEG image.
# asf : ASF compatible streaming (Windows Media Player format).
# swf : Macromedia flash(tm) compatible stream
# avi : AVI format (open divx video, mpeg audio sound)
# master : special ffmpeg stream used to duplicate a server
Format mpeg
# Bitrate for the audio stream. Codecs usually support only a few
# different bitrates.
AudioBitRate 128
# Number of audio channels : 1 = mono, 2 = stereo
AudioChannels 2
# Sampling frequency for audio. When using low bitrates, you should
# lower this frequency to 22050 or 11025. The supported frequencies
# depend on the selected audio codec.
AudioSampleRate 44100
# Bitrate for the video stream.
VideoBitRate 1536
# Number of frames per second
VideoFrameRate 25
# Size of the video frame : WxH (default: 160x128)
# The following abbreviation are defined : sqcif, qcif, cif, 4cif
VideoSize 160x128
# transmit only intra frames (useful for low bitrates, but kills frame rate)
#VideoIntraOnly
# If non intra only, an intra frame is transmitted every VideoGopSize
# frames Video synchronization can only begin at an I frames.
VideoGopSize 12
# More MPEG4 parameters
# VideoHighQuality
# Video4MotionVector
# Choose your codecs:
AudioCodec mp3
VideoCodec mpeg1video
# Suppress audio
#NoAudio
# Suppress video
#NoVideo
#VideoQMin 3
#VideoQMax 31
# Set this to the number of seconds backwards in time to start. Note that
# most players will buffer 5-10 seconds of video, and also you need to allow
# for a key frame to appear in the data stream.
#PreRoll 15
# ACL:
# You can allow ranges of addresses (or single addresses)
#ACL ALLOW <first address> <last address>
# You can deny ranges of addresses (or single addresses)
#ACL DENY <first address> <last address>
# You can repeat the ACL allow/deny as often as you like. It is on a per
# stream basis. The first match defines the action. If there are no matches,
# then the default is the inverse of the last ACL statement.
#
# Thus 'ACL allow localhost' only allows access from localhost.
# 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and
# allow everybody else.
</Stream>
##################################################################
# Example streams
<Stream test1.mpg>
Format mpeg
AudioBitRate 128
AudioChannels 2
#AudioSampleRate 44100
VideoBitRate 800
VideoFrameRate 25
#VideoSize 320x160
#VideoGopSize
#VideoGopSize 12
</Stream>
# Multipart JPEG
#<Stream test.mjpg>
#Feed feed1.ffm
#Format mpjpeg
#VideoFrameRate 25
##VideoIntraOnly
#VideoBitRate 1536
#AudioBitRate 128
#VideoSize 352x240
#</Stream>
# Single JPEG
#<Stream test.jpg>
#Feed feed1.ffm
#Format jpeg
#VideoFrameRate 2
#VideoIntraOnly
##VideoSize 352x240
#NoAudio
#</Stream>
# Flash
#<Stream test.swf>
#Feed feed1.ffm
#Format swf
#VideoFrameRate 2
#VideoIntraOnly
#NoAudio
#</Stream>
# ASF compatible
#<Stream stream.asf>
#Feed feed1.ffm
#Format asf
#VideoFrameRate 25
#VideoSize 352x240
#VideoBitRate 1536
#VideoGopSize 30
#AudioBitRate 128
#StartSendOnKey
#</Stream>
# MP3 audio
#<Stream test.mp3>
#Feed feed1.ffm
#Format mp2
#AudioCodec mp3
#AudioBitRate 64
#AudioChannels 1
#AudioSampleRate 44100
#NoVideo
#</Stream>
# Ogg Vorbis audio
#<Stream test.ogg>
#Feed feed1.ffm
#Title "Stream title"
#AudioBitRate 64
#AudioChannels 2
#AudioSampleRate 44100
#NoVideo
#</Stream>
# Real with audio only at 32 kbits
#<Stream test.ra>
#Feed feed1.ffm
#Format rm
#AudioBitRate 32
#NoVideo
#NoAudio
#</Stream>
# Real with audio and video at 64 kbits
#<Stream test.rm>
#Feed feed1.ffm
#Format rm
#AudioBitRate 32
#VideoBitRate 128
#VideoFrameRate 25
#VideoGopSize 25
#NoAudio
#</Stream>
##################################################################
# A stream coming from a file : you only need to set the input
# filename and optionnally a new format. Supported conversions:
# avi -> asf
#<Stream file.rm>
#File "/usr/local/httpd/htdocs/tlive.rm"
#NoAudio
#</Stream>
#<Stream file.asf>
#File "/usr/local/httpd/htdocs/test.asf"
#NoAudio
#Author "Me"
#Copyright "Super MegaCorp"
#Title "Test stream from disk"
#Comment "Test comment"
#</Stream>
##################################################################
# RTSP examples
#
# You can access to this stream with the RTSP URL:
# rtsp://localhost:5454/test1-rtsp.mpg
#
# A non standard RTSP redirector is also created. Its URL is:
# http://localhost:8090/test1-rtsp.rtsp
#<Stream test1-rtsp.mpg>
#Format rtp
#File "/usr/local/httpd/htdocs/test1.mpg"
#</Stream>
##################################################################
# SDP/multicast examples
#
# If you want to send your stream in multicast, you must set the
# multicast address with MulticastAddress. The port and the TTL can
# also be set.
#
# An SDP file is automatically generated by ffserver by adding the
# 'sdp' extension to the stream name (here
# http://localhost:8090/test1-sdp.sdp). You should usually give this
# file to your player to play the stream.
#
# The 'NoLoop' option can be used to avoid looping when the stream is
# terminated.
#<Stream test1-sdp.mpg>
#Format rtp
#File "/usr/local/httpd/htdocs/test1.mpg"
#MulticastAddress 224.124.0.1
#MulticastPort 5000
#MulticastTTL 16
#NoLoop
#</Stream>
##################################################################
# Special streams
# Server status
<Stream stat.html>
Format status
# Only allow local people to get to the status
ACL allow localhost
ACL allow 192.168.0.0 192.168.255.255
#FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico
</Stream>
# Redirect index.html to the appropriate site
<Redirect index.html>
URL http://ffmpeg.sourceforge.net/
</Redirect>
|
When i try to connect i get nothing. And when i start the server i get this.
| Code: | ffserver KylieMinogue_Cant_512k.wmv
ffserver started.
127.0.0.1 - - [Mon Sep 13 07:01:02 2004] "GET /feed1.ffm HTTP/1.0" 200 298
feed1.ffm: Pid 4327 exited with status 256 after 0 seconds
|
I have searched the forum, used google. But nothing works.
Any ideas are welcome. I have no idea what i am doing wrong.
Working config is also good for me. I learn alot by reading config files that work. |
|
Multimedia
