Help toshiba 2450-401Nvidia TV out

[dkmorb]

Hi all....i'm new here
I have just a problem: I want to enable the Tv out of my graphic card (Nvidia 420 Go)....any ideas? Any suggestion?

My config is:
1) kernel 2.6.8.1
2) nvidia-kernel 1.6.111-r1

[dkmorb]

I try also this in my xorg.conf, but nothing happens

Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these

#FontPath "/usr/local/share/fonts/ttffonts"
#FontPath "/usr/local/share/fonts/ooffice/truetype"
FontPath "/usr/local/share/fonts/joined"
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
#Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
#Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
#Load "speedo"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbDisable"
#Option "XkbRules" "xfree86"
#Option "XkbModel" "pc104"
Option "XkbLayout" "it"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "nvidia"
BusID "AGP:01:00:0"
# Override DDC
Option "NoDDC" "1"
Option "IgnoreEDID" "1"
# Important when using TFT
Option "GenerateRTList" "0"
Option "OverridePolarity" "1"
# Switch AGP
Option "NvAGP" "3"
# Some Pointer Eyecandy
Option "CursorShadow" "1"
Option "CursorShadowAlpha" "63"
Option "CursorShadowYOffset" "2"
Option "CursorShadowXOffset" "4"
# Picture Improvement
Option "DigitalVibrance" "0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28-60
VertRefresh 43-72
Option "DPMS"
Option "NoDDC" "1"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
# Override DDC
Option "NoDDC" "1"
# Switch AGP
Option "NvAgp" "3"
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection

## SECTION FOR TV - begin
Section "Screen"
Identifier "TV"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
# Override DDC
Option "NoDDC" "1"
# Switch AGP
Option "NvAgp" "3"
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
# TV Twinview
Option "TwinView" "1"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "TwinViewOrientation" "Clone"
Option "TVOutFormat" "COMPOSITE"
Option "ConnectedMonitor" "DFP,TV"
Option "TVStandard" "PAL-B" #I'm italian, so...
Option "MetaModes" "1024x768 @1024x768,1024x768 @1024x768; 800x600 @800x600,800x600 @800x600; 640x480 @640x480,640x480 @640x480"
EndSection
## SECTION FOR TV - end

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection

Section "ServerLayout"
Identifier "Twinview"
Screen "TV"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection


Section "DRI"
Mode 0666
EndSection[img][/img]

[r3pek]

you have to put the TwinView options in the Device Section.... not in the Screen Section.

[r3pek]

you have to put the TwinView options in the Device Section.... not in the Screen Section.

[r3pek]

you have to put the TwinView options in the Device Section.... not in the Screen Section.

[dkmorb]

WOW r3pek ....THANKS A LOT!
Now my Tv Out seems to be working...but when I shutdown X.org strange colors apperar on my laptop screen...'cose Nvidia driver are bad! (?)

[r3pek]

Are you using framebuffer with the nvidia riva driver????

[dkmorb]

No, i'm using just VESA VGA graphic support...i'll try to disable it ..ok?
bye

[dkmorb]

ok...now the Tv-Out and crt-out work!!! The problem is vesafb...now I work in console with big fonts, but no problem for me...

Byez