NVidia-Treiber funktioniert nicht !!!

[asterix_iii]

Hallo,

verwendet Gentoo mit Fluxbox . Wenn ich nun in der xorg.conf den nvidia-Treiber aktiviere bekomme ich immer die Fehlermeldung:

(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "vgahw"

(die gesamte Log-Datei findet ihr unten).

Ich habe schon den Treiber neu kompiliert. Bios-Einstellungen zu den Interrupts gibt es bei meinem Notebook (Dell Inspiron 8200) keine. Was mache ich falsch

Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: Linux 2.4.27 i686 [ELF]
Current Operating System: Linux tux 2.4.27 #1 Thu Sep 23 01:49:33 MEST 2004 i686
Build Date: 23 September 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 1 22:19:17 2004
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "DefaultMonitor"
(**) | |-->Device "DefaultVideo"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc102"
(**) XKB: model: "pc102"
(**) Option "XkbLayout" "de"
(**) XKB: layout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) XKB: variant: "nodeadkeys"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Speedo/,/usr/share/fonts/Type1/,/usr/share/fonts/CID/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/,/usr/share/fonts/local/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1a30 card 0000,0000 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,2482 card 8086,4541 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:2: chip 8086,2487 card 8086,4541 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 42 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,248a card 8086,4541 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:5: chip 8086,2485 card 1013,5959 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,2486 card 14f1,5421 rev 02 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0112 card 1028,00d4 rev b2 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 10b7,9200 card 1028,00d4 rev 78 class 02,00,00 hdr 00
(II) PCI: 02:01:0: chip 104c,ac42 card 4000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:01:1: chip 104c,ac42 card 4800,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:01:2: chip 104c,8027 card 1028,00d4 rev 00 class 0c,00,10 hdr 80
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,16), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[2] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[3] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[4] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]
[5] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]
[6] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[7] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf4000000 - 0xfbffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (2:1:0), (2,4,4), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) PCI-to-CardBus bridge:
(II) Bus 5: bridge is at (2:1:1), (2,5,5), BCTRL: 0x05c0 (VGA_EN is cleared)
(--) PCI:*(1:0:0) nVidia Corporation NV11 [GeForce2 Go] rev 178, Mem @ 0xfc000000/24, 0xe0000000/27
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xebffffff to 0xe7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[1] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B]
[2] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B]
[3] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[4] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[5] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[6] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[8] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[9] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[10] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[11] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[12] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[13] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[14] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[15] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[16] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[17] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[18] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[1] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B]
[2] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B]
[3] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[4] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[5] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[6] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[8] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[9] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[10] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[11] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[12] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[13] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[14] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[15] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[16] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[17] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[18] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[6] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B]
[7] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B]
[8] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[9] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[16] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[17] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[18] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[19] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[20] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[21] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[22] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[25] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.1
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.7.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.5336
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) NVIDIA XFree86 Driver 1.0-5336 Wed Jan 14 18:30:46 PST 2004
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[6] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B]
[7] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B]
[8] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[9] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[16] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[17] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[18] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[19] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[20] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[21] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[22] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[25] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[6] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B]
[7] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B]
[8] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[9] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[18] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[19] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[20] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[21] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[22] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[23] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[24] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[25] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[27] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[28] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xE0000000
(--) NVIDIA(0): MMIO registers at 0xFC000000
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.







# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
Load "freetype"
# Load "xtt"

# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Speedo/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
# FontPath "/usr/share/fonts/TrueType/"
# FontPath "/usr/share/fonts/freefont/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "de"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"

# Mouse-speed setting for PS/2 mouse.

# Option "Resolution" "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "DefaultMonitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 30-200

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 50-150
Modeline "1600x1200" 162 1600 1628 1712 1912 1200 1201 1203 1220
#Option "dpms"

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
Identifier "DefaultVideo"
Driver "nv"
#Driver "nvidia"
# unsupported card
#VideoRam 32768
#Option "DPMS"
#NvAGP --> 1
#Option "NvAGP" "1"
# Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "DefaultVideo"
Monitor "DefaultMonitor"
#Option "IgnoreEDID" "1"
DefaultDepth 24

Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1600x1200"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
# Mode 0666
# EndSection

[photon_]

http://www.gentoo.de/doc/de/desktop.xml#doc_chap2

Dort hats eine gute anleitung zu nVidia Grafikkarten, check die mal durch, vielleicht hast du ja was vergessen.

ps: Dein Titel ist nicht ganz korrekt, bei mir funktioniert er naehmlich - liegt also nicht am Treiber.

[zielscheibe]

Hi,


Wenn du den "nvidia" Trieber verwenden möchtest, muß "Load "dri"" auskommentiert werden.

[asterix_iii]

Hallo,

vorerst Danke, dass mir überhaupt jemand hilft.

Ich suche jetzt schon einen 1Woche in den Forum und im Internet herum. Ich habe auch schon sehr viel ausprobiert, leider ohne Erfolg.

Asterix_III

[asterix_iii]

Hallo,

das Problem hat sich durch den Kernel 2.6.8.1 behoben. Kernel und Nvidia neu kompiliert und es hat funktoniert.

Asterix.

[pablo_supertux]

@asterix: wenn du die xorg.conf Datei postest, dann poste nur das interessante, die ganze Kommentare brauchen wir nicht, wozu brauchen wir z.B.

[gnusnoop]

Jau.

DRI Modul auskommentieren und beim Kernelbau darauf achten, dass die Stacksize auf 8k steht (bzw. die Option 4k nicht abhaken)!