| View previous topic :: View next topic |
| Author |
Message |
d3vah
Apprentice
Joined: 13 Feb 2003
Posts: 184
Location: Italy
|
 Posted: Sat Oct 09, 2004 12:57 am Post subject: Console in sciopero |
 |
|
Salve a tutti,
compilando il kernel sul mio vekkio protatile alla ricerca di configurazioni ottimizzate mi è capitata una cosa strana.
Ho messo una topa come framebuffer e fin qui tutto ok, poi ho apportato delle modifiche qua e la ed ora praticamente all'avvio ho solo la topa (almeno quella  ) e mi esce scritto nulla fino alla scritta di login, che esce, e poi parte kdm senza alcun problema.
In effetti il problema è solo di tipo grafico dato che cmq la console è abilitata e lo strano comportamento di "oscuramento" è da limitarsi al solo boot
vi do un dmesg:
| Code: | Linux version 2.6.7-gentoo-r14 (root@d3vil.pilusci.org) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #5 Sat Oct 9 02:17:46 Local time zone must be set--see zic manua
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffe0000 (usable)
BIOS-e820: 000000000ffe0000 - 000000000ffeec00 (ACPI data)
BIOS-e820: 000000000ffeec00 - 000000000fff0000 (ACPI NVS)
BIOS-e820: 000000000fff0000 - 000000000fff4000 (reserved)
BIOS-e820: 000000000fff4000 - 0000000010000000 (usable)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
256MB LOWMEM available.
On node 0 totalpages: 65536
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61440 pages, LIFO batch:15
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
IBM machine detected. Enabling interrupts during APM calls.
IBM machine detected. Disabling SMBus accesses.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6eb0
ACPI: RSDT (v001 PTLTD RSDT 0x06041110 LTP 0x00000000) @ 0x0ffe4b71
ACPI: FADT (v001 IBM TP-16 0x06041110 0x00000000) @ 0x0ffeeb65
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06041110 LTP 0x00000001) @ 0x0ffeebd9
ACPI: DSDT (v001 IBM TP-16 0x06041110 MSFT 0x0100000c) @ 0x00000000
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Gentoo2.6 ro root=301 quiet video=vesa:ywrap,mtrr
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 896.374 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 256176k/262144k available (1720k kernel code, 5172k reserved, 718k data, 144k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1773.56 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 288k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: Power Resource [PSER] (on)
ACPI: Power Resource [PSIO] (on)
ACPI: Embedded Controller [EC] (gpe 9)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
vesafb: framebuffer at 0xf0000000, mapped to 0xd0810000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at c000:882d
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Simple Boot Flag at 0x35 set to 0x1
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Limiting direct PCI/PCI transfers.
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states)
ACPI: Thermal Zone [THM0] (55 C)
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
bootsplash 3.1.4-2004/02/19-spock-0.1: looking for picture.... found (1024x768, 295542 bytes, v3).
Console: switching to colour frame buffer device 74x46
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 204M
agpgart: AGP aperture is 64M @ 0xf8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
e100: Intel(R) PRO/100 Network Driver, 3.0.18
e100: Copyright(c) 1999-2004 Intel Corporation
e100: eth0: e100_probe: addr 0xe8120000, irq 11, MAC addr 00:03:47:B7:0B:1E
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1850-0x1857, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1858-0x185f, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DJSA-220, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: UJDA720 DVD/CDRW, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB) w/1874KiB Cache, CHS=41344/15/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 >
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Couldn't find valid RAM disk image starting at 0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 144k freed
Warning: unable to open an initial console.
Adding 264564k swap on /dev/hda6. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
SCSI subsystem initialized
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Real Time Clock Driver v1.12
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:07.2: irq 11, io base 00001860
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
mtrr: 0xf0000000,0x800000 overlaps existing 0xf0000000,0x200000
inserting floppy driver for 2.6.7-gentoo-r14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
spurious 8259A interrupt: IRQ7.
|
lilo.conf:
| Code: |
lba32
boot = /dev/hda
map = /boot/.map
install = /boot/boot-menu.b
menu-scheme=Wb
prompt
timeout=50
default=Gentoo2.6
image = /boot/vmlinuz
vga=0x317
root = /dev/hda1
label = Gentoo2.6
append = "quiet video=vesa:ywrap,mtrr"
read-only # read-only for checking
initrd=/boot/initrd-1024x768-nicola
other = /dev/hda2
#other = /devices/discs/disc0/part1
label = Windows
table = /dev/hda
|
Ho provato a rimuovere quiet dall'append e sorpresa delle sorprese mi esce il dmesg come è normale che sia, arrivato al momento di caricare i servizi e simili (per intendere quelli seguiti dall ok) non appare + nulla, quindi passo dal dmesg iniziale direttamente alla login con qualche secondo di pausa.
I driver video usati per il framebuffer sono i vesa, ho lo stesso splashscreen su 3 pc diversi ma solo qui mi da questo problema.
Ribadisco cmq che per un paio di giorni ha funzionato senza problemi
uname -a
[code[
Linux d3vil.pilusci.org 2.6.7-gentoo-r14 #2 Sat Oct 9 03:36:27 Local time zone must be set--see zic manua i686 Pentium III (Coppermine) GenuineIntel GNU/Linux
[/code]
Tnx
_________________
Ciro Guariglia
Last edited by d3vah on Sat Oct 09, 2004 9:36 am; edited 1 time in total |
|
| Back to top |
|
 |
gutter
Bodhisattva
Joined: 13 Mar 2004
Posts: 7162
Location: Aarau, Aargau, Switzerland
|
| Posted: Sat Oct 09, 2004 7:26 am Post subject: |
|
|
Che append line hai passato al kernel?
_________________
Registered as User #281564 and Machines #163761 |
|
| Back to top |
|
|
Mr.Evolution
Guru
Joined: 30 Dec 2003
Posts: 346
Location: Padova (Italy)
|
| Posted: Sat Oct 09, 2004 8:42 am Post subject: |
|
|
così su due piedi penso sia un problema di frame buffer "sbagliato".....
esempio:
il mio portatile usa intel830 di grafica che è l'evoluzione di intel810 ma con i810 su 2.6.x non vedo niente....e con VESA funziona da dio, prova altre configurazioni....
_________________
Niente è impossibile......è solo questione di tempo!
Lo script è quello che dai agli attori. Il programma è quello che dai agli spettarori.
-- Larry Wall, creatore di Perl |
|
| Back to top |
|
|
d3vah
Apprentice
Joined: 13 Feb 2003
Posts: 184
Location: Italy
|
| Posted: Sat Oct 09, 2004 9:37 am Post subject: |
|
|
Up nel primo post
_________________
Ciro Guariglia |
|
| Back to top |
|
|
cloc3
Advocate
Joined: 13 Jan 2004
Posts: 4810
Location: http://www.gentoo-users.org/user/cloc3/
|
| Posted: Sat Oct 09, 2004 12:35 pm Post subject: |
|
|
Hai provato a dare
| Code: | rc-update del xdm default
|
riavviare e vedere cosa succede?
Può darsi che sia X a far partire il tuo schermo, mentre il frame buffer non ci riesca. A me era successo, una volta, con delle scehde grafiche che stavano per rompersi.
_________________
vu vu vu
gentù
mi piaci tu |
|
| Back to top |
|
|
d3vah
Apprentice
Joined: 13 Feb 2003
Posts: 184
Location: Italy
|
| Posted: Sat Oct 09, 2004 1:11 pm Post subject: |
|
|
| cloc3 wrote: | Hai provato a dare
| Code: | rc-update del xdm default
|
riavviare e vedere cosa succede?
Può darsi che sia X a far partire il tuo schermo, mentre il frame buffer non ci riesca. A me era successo, una volta, con delle scehde grafiche che stavano per rompersi. |
Ma xdm parte alla fine dei servizi e poi cmq vedo da console che mi chiede la login mi manca solo la parte dove carica i servizi con i relativi [ok]
_________________
Ciro Guariglia |
|
| Back to top |
|
|
midall
Tux's lil' helper
Joined: 12 Mar 2004
Posts: 139
|
| Posted: Sat Oct 09, 2004 1:49 pm Post subject: |
|
|
[OT] Non si può vedere sta topa  [/OT]
_________________
Poesia a gentoo: Gentù gentù senza di tù il mio computer fà pupù! |
|
| Back to top |
|
|
Gavrila
Apprentice
Joined: 08 Jun 2003
Posts: 275
|
| Posted: Mon Oct 18, 2004 7:44 pm Post subject: |
|
|
stesso identico problema o_o
_________________
Jabber ID: Gavrila@jabber.org |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
