| View previous topic :: View next topic |
| Author |
Message |
Mr.Evolution
Guru
Joined: 30 Dec 2003
Posts: 346
Location: Padova (Italy)
|
 Posted: Sat Oct 09, 2004 8:19 am Post subject: [CONF] LinModem del portatile |
 |
|
| Code: | lspci -vv
[...]
0000:00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem Controller (rev 02) (prog-if 00 [Generic])
Subsystem: Acer Incorporated [ALI]: Unknown device 1024
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at a800
Region 1: I/O ports at ac00 [size=128]
[...]
|
ho letto in giro che con
dovrebbe funzionare ma con gentoo-dev-sources-2.6.8-r7 si blocca durante il bootsptrap del pci-hotplug....idee??
Ho installato anche gentoo-sources-2.4.26 ma nessun lume...[/code]
_________________
Niente è impossibile......è solo questione di tempo!
Lo script è quello che dai agli attori. Il programma è quello che dai agli spettarori.
-- Larry Wall, creatore di Perl |
|
| Back to top |
|
 |
federico
Advocate
Joined: 18 Feb 2003
Posts: 3272
Location: Italy, Milano
|
| Posted: Sat Oct 09, 2004 2:03 pm Post subject: |
|
|
Il mio winmodem acer funziona coi driver "slarm" e il demone "slmodemd", non ho qui il portatile per controllare ora ma mi pare che sia identico al tuo...
Federico
_________________
Sideralis www.sideralis.org
Pic http://blackman.amicofigo.com/gallery
Arduino http://www.arduino.cc
Chi aveva potuto aveva spaccato
2000 pezzi buttati là
Molti saluti,qualche domanda
Semplice come musica punk |
|
| Back to top |
|
|
Manuelixm
l33t
Joined: 03 Apr 2004
Posts: 832
Location: Brescia
|
| Posted: Sun Oct 10, 2004 8:59 am Post subject: |
|
|
Io ho questo modem sul mio toshiba:
| Code: |
Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
|
se è simile, ti posso dare delle dritte su come farlo funzionare con salmodem. |
|
| Back to top |
|
|
dkmorb
n00b
Joined: 30 Sep 2004
Posts: 52
|
| Posted: Sun Oct 10, 2004 9:19 am Post subject: |
|
|
| Porca zozza, abbiamo tutti sto modem! Io pure uso i driver slamr e il demone slmodemd...ed ho un toshiba satellite 2450, magari ti possiamo dare una mano! |
|
| Back to top |
|
|
federico
Advocate
Joined: 18 Feb 2003
Posts: 3272
Location: Italy, Milano
|
|
| Back to top |
|
|
Mr.Evolution
Guru
Joined: 30 Dec 2003
Posts: 346
Location: Padova (Italy)
|
| Posted: Mon Oct 11, 2004 4:21 pm Post subject: |
|
|
Beh ragazzi se siamo tutti sulla stessa barca e a voi tutti funzia ora provo le soluzioni da voi proposte e faccio funzionare il modem quando sono dalla nonna...
Mi stavo preoccupando quando googlando un pò ho visto una soluzione diversa dall'altra.....(non vi dico che casino c'è nella rete)
Cmq ora provo
_________________
Niente è impossibile......è solo questione di tempo!
Lo script è quello che dai agli attori. Il programma è quello che dai agli spettarori.
-- Larry Wall, creatore di Perl |
|
| Back to top |
|
|
Mr.Evolution
Guru
Joined: 30 Dec 2003
Posts: 346
Location: Padova (Italy)
|
| Posted: Mon Oct 11, 2004 4:28 pm Post subject: |
|
|
Nel portage c'è:
| Code: |
* net-dialup/slmodem
Latest version available: 2.9.10
Latest version installed: [ Not Installed ]
Size of downloaded files: [no/bad digest]
Homepage: http://www.smlink.com/
Description: Driver for Smart Link modem
|
sono questi i driver di cui parlate??? O devo scaricarli per qualcosa??
_________________
Niente è impossibile......è solo questione di tempo!
Lo script è quello che dai agli attori. Il programma è quello che dai agli spettarori.
-- Larry Wall, creatore di Perl |
|
| Back to top |
|
|
dkmorb
n00b
Joined: 30 Sep 2004
Posts: 52
|
|
| Back to top |
|
|
federico
Advocate
Joined: 18 Feb 2003
Posts: 3272
Location: Italy, Milano
|
|
| Back to top |
|
|
Mr.Evolution
Guru
Joined: 30 Dec 2003
Posts: 346
Location: Padova (Italy)
|
| Posted: Tue Oct 12, 2004 3:50 pm Post subject: |
|
|
ehm.........
| Code: |
# modules-update
/etc/modules.d/slmodem: line 5: define: command not found
/etc/modules.d/slmodem: line 9: options: command not found
/etc/modules.d/slmodem: line 10: options: command not found
/etc/modules.d/slmodem: line 12: alias: char-major-212: not found
/etc/modules.d/slmodem: line 12: alias: slamr: not found
/etc/modules.d/slmodem: line 13: alias: char-major-213: not found
/etc/modules.d/slmodem: line 13: alias: slusb: not found
|
????? cosa faccio???
però /etc/init.d/slmodem starta perfettamente...
crea /dev/ttySL0....
| Code: |
# /etc/init.d/slmodem start
* Starting slmodemd for /dev/ttySL0... [ ok ]
# ls -al /dev/ttySL0
lr-xr-xr-x 1 root root 10 12 ott 17:47 /dev/ttySL0 -> /dev/pts/1
|
Cosa ne dite??? Uso gentoo-dev-sources-2.6.8-r7
Questo è il mio /etc/conf.d/slmodem
| Code: |
# Config file for /etc/init.d/slmodemd
DEV=/dev/ttySL0
COUNTRY=ITALY
GROUP=dialout
# The following symlink will be created if uncommented
LN_DEV=/dev/modem
# Raise priority to reduce modem dropouts
NICE=-6
# ALSA Options:
# The following sets the ALSA (alsasound) init script to
# be a dependancy of the slmodem one. It does also provides
# ALSA support.
MODULE=alsa
# The hardware slot
HW_SLOT=0
# Non-ALSA OPTIONS:
# MODULE=slamr
# or
# MODULE=slusb
# this file must be kept in sync with:
# /etc/devfs.d/slmodem (devfs)
# /etc/modules.d/slmodem (devfs)
# /etc/udev/rules.d/55-slmodem.rules (udev)
# /etc/udev/permissions.d/55-slmodem.permissions (udev)
|
Cosa ho sbagliato?? 
_________________
Niente è impossibile......è solo questione di tempo!
Lo script è quello che dai agli attori. Il programma è quello che dai agli spettarori.
-- Larry Wall, creatore di Perl |
|
| Back to top |
|
|
Mr.Evolution
Guru
Joined: 30 Dec 2003
Posts: 346
Location: Padova (Italy)
|
| Posted: Wed Oct 13, 2004 5:33 pm Post subject: |
|
|
nessuna idea???
_________________
Niente è impossibile......è solo questione di tempo!
Lo script è quello che dai agli attori. Il programma è quello che dai agli spettarori.
-- Larry Wall, creatore di Perl |
|
| Back to top |
|
|
Mr.Evolution
Guru
Joined: 30 Dec 2003
Posts: 346
Location: Padova (Italy)
|
| Posted: Wed Oct 13, 2004 5:50 pm Post subject: |
|
|
Questo è il syslog...
| Code: |
Oct 13 19:47:57 angel pppd[4525]: pppd 2.4.1 started by root, uid 0
Oct 13 19:47:58 angel chat[4530]: abort on (BUSY)
Oct 13 19:47:58 angel chat[4530]: abort on (ERROR)
Oct 13 19:47:58 angel chat[4530]: abort on (NO ANSWER)
Oct 13 19:47:58 angel chat[4530]: abort on (NO CARRIER)
Oct 13 19:47:58 angel chat[4530]: abort on (NO DIALTONE)
Oct 13 19:47:58 angel chat[4530]: abort on (Invalid Login)
Oct 13 19:47:58 angel chat[4530]: abort on (Login incorrect)
Oct 13 19:47:58 angel chat[4530]: send (ATZ^M)
Oct 13 19:47:58 angel chat[4530]: expect (OK)
Oct 13 19:47:58 angel chat[4530]: ATZ^M^M
Oct 13 19:47:58 angel chat[4530]: OK
Oct 13 19:47:58 angel chat[4530]: -- got it
Oct 13 19:47:58 angel chat[4530]: send (ATDT7023456789^M)
Oct 13 19:47:58 angel chat[4530]: expect (CONNECT)
Oct 13 19:47:58 angel chat[4530]: ^M
Oct 13 19:47:58 angel chat[4530]: ATDT7023456789^M^M
Oct 13 19:47:58 angel chat[4530]: NO CARRIER
Oct 13 19:47:58 angel chat[4530]: -- failed
Oct 13 19:47:58 angel chat[4530]: Failed (NO CARRIER)
Oct 13 19:47:58 angel pppd[4525]: Connect script failed
Oct 13 19:47:59 angel pppd[4525]: Exit.
|
_________________
Niente è impossibile......è solo questione di tempo!
Lo script è quello che dai agli attori. Il programma è quello che dai agli spettarori.
-- Larry Wall, creatore di Perl |
|
| Back to top |
|
|
Mr.Evolution
Guru
Joined: 30 Dec 2003
Posts: 346
Location: Padova (Italy)
|
| Posted: Fri Oct 15, 2004 10:42 am Post subject: |
|
|
Se lancio /etc/init.d/slmodem start
nel syslog leggo:
| Code: |
Oct 15 12:40:51 angel modprobe: FATAL: Module hsfmc97ali not found.
Oct 15 12:40:51 angel modprobe: FATAL: Module hsfusbcd2 not found.
Oct 15 12:40:51 angel modprobe: FATAL: Module hsfpcibasic2 not found.
Oct 15 12:40:51 angel modprobe: FATAL: Module hsfmc97ich not found.
Oct 15 12:40:51 angel modprobe: FATAL: Module hsfmc97via not found.
Oct 15 12:40:51 angel modprobe: FATAL: Module hsfmc97ali not found.
Oct 15 12:40:51 angel modprobe: FATAL: Module hsfusbcd2 not found.
Oct 15 12:40:51 angel modprobe: FATAL: Module hsfpcibasic2 not found.
Oct 15 12:40:52 angel modprobe: FATAL: Module hsfmc97ich not found.
Oct 15 12:40:52 angel modprobe: FATAL: Module hsfmc97via not found.
Oct 15 12:40:52 angel modprobe: FATAL: Module hsfmc97ali not found.
Oct 15 12:40:52 angel modprobe: FATAL: Module hsfusbcd2 not found.
Oct 15 12:40:52 angel modprobe: FATAL: Module hsfpcibasic2 not found.
Oct 15 12:40:52 angel modprobe: FATAL: Module hsfmc97ich not found.
Oct 15 12:40:52 angel modprobe: FATAL: Module hsfmc97via not found.
Oct 15 12:40:52 angel modprobe: FATAL: Module hsfmc97ali not found.
Oct 15 12:40:52 angel modprobe: FATAL: Module hsfusbcd2 not found. |
non ci capisco più niente, devo usare i driver hsflinmodem????
Forse ho scoperto perché dice NO CARRIER: per telefonare in ufficio devo digitare 0 altrimenti la centralina non mi lascia telefonare....ed una pausa, come esprimo questa pausa a PPP????
_________________
Niente è impossibile......è solo questione di tempo!
Lo script è quello che dai agli attori. Il programma è quello che dai agli spettarori.
-- Larry Wall, creatore di Perl |
|
| Back to top |
|
|
rota
l33t
Joined: 13 Aug 2003
Posts: 960
|
| Posted: Fri Oct 15, 2004 11:40 am Post subject: |
|
|
me sa che ce lo pure io sull mio poratile .. stasera controllo  |
|
| Back to top |
|
|
rota
l33t
Joined: 13 Aug 2003
Posts: 960
|
| Posted: Fri Oct 15, 2004 6:27 pm Post subject: bluetooth |
|
|
ciao a tutti o appena cmprato .. .va be lo preso in prestito all lavoro ...se vogliamo dire cosi ....un bluetooth
vorrei usarla su linux
ma nn so come fare....
o fatto ...bash-2.05b# lspci
00:00.0 Host bridge: VIA Technologies, Inc. P/KN266 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266]
poi nn so cosafare ...sto leggendo un po di guide su gogle....pero nn o capito bene come fare .. |
|
| Back to top |
|
|
Mr.Evolution
Guru
Joined: 30 Dec 2003
Posts: 346
Location: Padova (Italy)
|
| Posted: Mon Oct 18, 2004 4:44 pm Post subject: |
|
|
Bluetooth????
Cosa vorresti dire???
Se hai una "penna" USB guarda su: https://forums.gentoo.org/viewtopic.php?t=111904
Sennò spiegati meglio e manda maggiori info...
_________________
Niente è impossibile......è solo questione di tempo!
Lo script è quello che dai agli attori. Il programma è quello che dai agli spettarori.
-- Larry Wall, creatore di Perl |
|
| Back to top |
|
|
randomaze
Bodhisattva
Joined: 21 Oct 2003
Posts: 9985
|
| Posted: Mon Oct 18, 2004 4:51 pm Post subject: Re: bluetooth |
|
|
| rota wrote: | | ciao a tutti o appena cmprato .. .va be lo preso in prestito all lavoro ...se vogliamo dire cosi ....un bluetooth |
guarda il link che ti ha postato Mr.Evolution, poi prova a cercare se ci sono altre info nel forum e in google e poi, se ancora non funziona apri un nuovo thread che abbia un titolo diverso da [CONF] LinModem del portatile
_________________
Ciao da me! |
|
| Back to top |
|
|
zilog80
Tux's lil' helper
Joined: 21 Aug 2003
Posts: 77
Location: Venice Italy
|
| Posted: Wed Dec 15, 2004 11:03 am Post subject: |
|
|
Pure io sto cercando di configurare il mio modem interno
| Code: | 0000:00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem (rev 03) (prog-if 00 [Generic])
Subsystem: Sony Corporation: Unknown device 818c
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 9
Region 0: I/O ports at e400
Region 1: I/O ports at e080 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
|
ho provato a emergere hsflinmodem 5.03.27mbsibeta02122600
ed eseguire hsfconfig ma mi chiede di inesrire un numero esadecimale di 4 cifre che identifica il PCI ID ma ho un po di dubbi su quale cifra mettere!!
| Code: |
Sorry, no communication controllers were found.
Please enter your modem's PCI Vendor ID []:
|
con lscpi da manuale
| Code: |
-n Show PCI vendor and device codes as numbers instead of looking them up in the PCI ID database.
|
mi esce questo output
| Code: |
0000:00:00.0 Class 0600: 8086:3340 (rev 03)
0000:00:01.0 Class 0604: 8086:3341 (rev 03)
0000:00:1d.0 Class 0c03: 8086:24c2 (rev 03)
0000:00:1d.1 Class 0c03: 8086:24c4 (rev 03)
0000:00:1d.2 Class 0c03: 8086:24c7 (rev 03)
0000:00:1d.7 Class 0c03: 8086:24cd (rev 03)
0000:00:1e.0 Class 0604: 8086:2448 (rev 83)
0000:00:1f.0 Class 0601: 8086:24cc (rev 03)
0000:00:1f.1 Class 0101: 8086:24ca (rev 03)
0000:00:1f.3 Class 0c05: 8086:24c3 (rev 03)
0000:00:1f.5 Class 0401: 8086:24c5 (rev 03)
0000:00:1f.6 Class 0703: 8086:24c6 (rev 03)
0000:01:00.0 Class 0300: 1002:5c61 (rev 01)
0000:02:01.0 Class 0607: 104c:ac8e
0000:02:01.2 Class 0c00: 104c:802e
0000:02:01.3 Class 0180: 104c:ac8f
0000:02:02.0 Class 0280: 8086:4220 (rev 05)
0000:02:04.0 Class 0c03: 1033:0035 (rev 43)
0000:02:04.1 Class 0c03: 1033:0035 (rev 43)
0000:02:04.2 Class 0c03: 1033:00e0 (rev 04)
0000:02:08.0 Class 0200: 8086:103d (rev 83)
|
il mio modem corrisponde a questa riga!
| Code: | | 0000:00:1f.6 Class 0703: 8086:24c6 (rev 03) |
mi piacerebbe sapre quale delle 4 cifre dovrei scegliere!! 
ho provato ad inserire 8086:24c6
| Code: |
Please enter your modem's PCI Vendor ID []: 8086
Please enter your modem's PCI Device ID []: 24c6
1) /etc/hsf/inf/linux_ali_smartmc.inf
2) /etc/hsf/inf/linux_athens.inf
3) /etc/hsf/inf/linux_hsf.inf
4) /etc/hsf/inf/linux_hsfi.inf
5) /etc/hsf/inf/linux_intel_smartmc.inf
6) /etc/hsf/inf/linux_smarthsf.inf
7) /etc/hsf/inf/linux_via_smartmc.inf
8) None of the above
Which INF file would you like to use with your HSF modem? (1-8) 3
Selected PCI VendorID=8086 DeviceID=24c6
and INF file /etc/hsf/inf/linux_hsf.inf
Supported countries:
ARGENTINA, AUSTRALIA, AUSTRIA, BANGLADESH,
BELGIUM, BOLIVIA, BRAZIL, BRUNEI, BULGARIA,
CANADA, CHILE, CHINA, COLOMBIA, COSTA_RICA,
CROATIA, CYPRUS, CZECH_REPUBLIC, DENMARK, DOMINICAN_REPUBLIC,
ECUADOR, EGYPT, EL_SALVADOR, FINLAND, FRANCE,
GERMANY, GREECE, GUATEMALA, HAITI, HONDURAS,
HONG-KONG, HUNGARY, ICELAND, INDIA, INDONESIA,
IRELAND, ISRAEL, ITALY, JAPAN, KOREA,
KUWAIT, LAOS, LATVIA, LIECHTENSTEIN, LUXEMBOURG,
MALAYSIA, MALTA, MEXICO, MYANMAR, NETHERLANDS,
NEW_ZEALAND, NORWAY, PAKISTAN, PANAMA, PARAGUAY,
PERU, PHILIPPINES, POLAND, PORTUGAL, ROMANIA,
RUSSIA, SAUDI_ARABIA, SINGAPORE, SLOVAKIA, SLOVENIA,
SOUTH_AFRICA, SPAIN, SRI_LANKA, SWEDEN, SWITZERLAND,
TAIWAN, THAILAND, TURKEY, UK, UKRAINE,
UNITED_ARAB_EMIRATES, URUGUAY, USA, VENEZUELA, VIETNAM
Please enter your country name [USA]: ITALY
Configuring modem for country: "ITALY"
You can change this setting later with the command "hsfconfig --country"
This package does not contain pre-built modules suitable for your system:
Distribution: unknown-unknown
Kernel arch: i686
Kernel version: linux-2.6.9-gentoo-r9
Trying to automatically re-compile the modules..
(this requires a C compiler and proper kernel sources to be installed)
Where is the linux source build directory that matches your running kernel?
[/lib/modules/2.6.9-gentoo-r9/build]
WARNING: missing file /lib/modules/2.6.9-gentoo-r9/build/include/linux/modversions.h
The cause of this problem is usually a missing or misconfigured
kernel source tree (and sometimes an incorrect directory or symbolic link).
First, ensure that the proper kernel source and compiler packages
from your distribution vendor and/or the community are installed.
The Linux kernel can then be reconfigured by running "make menuconfig"
under the kernel source directory (usually /usr/src/linux).
Verify that the proper options for your system are selected,
and that CONFIG_SMP ("Symmetric multi-processing support" under
"Processor type and features") is disabled, as this driver is
presently designed to work on single-processor machines.
Then compile and install your new kernel (for more information about
this procedure, see the README file under the kernel source directory),
reboot the system using the new kernel, and re-run "hsfconfig".
|
a parte che non so che inf scegliere (hsf, hsfi??) e che
/lib/modules/2.6.9-gentoo-r9/build/include/linux/ esiste ma la libreria modversions.h è mancante, mi chideo come potrà proseguire questa agonia!
Nessuno ha configurato un modem con successo qui?? |
|
| Back to top |
|
|
zilog80
Tux's lil' helper
Joined: 21 Aug 2003
Posts: 77
Location: Venice Italy
|
| Posted: Wed Dec 15, 2004 11:18 am Post subject: |
|
|
ho provato a cercare il file
| Code: |
find / -name modversions.h
/usr/src/linux-2.6.9-gentoo-r9/include/config/modversions.h
|
e trovato il file l'ho ricopiato dove lo richiedeva.. quindi
| Code: |
cp /usr/src/linux-2.6.9-gentoo-r9/include/config/modversions.h /usr/src/linux-2.6.9-gentoo-r9/include/linux/
|
e ho rieseguito il tutto ma.. a quanto pare bisogna disabilitare il kernel preemptive.. e questo proprio non mi va..
| Code: |
Where is the linux source build directory that matches your running kernel?
[/lib/modules/2.6.9-gentoo-r9/build]
Re-compiling HSF modules for kernel 2.6.9-gentoo-r9, using source directory
/lib/modules/2.6.9-gentoo-r9/build. Please wait..
ERROR: Module re-compilation and installation failed!
Please examine the log file "/tmp/hsfconfig-buildlog.txt" to determine why.
z80 linux # cat /tmp/hsfconfig-buildlog.txt
tail: `-1' option is obsolete; use `-n 1' since this will be removed in the future
rm -f *.o *.a
tail: `-1' option is obsolete; use `-n 1' since this will be removed in the future
make[1]: Entering directory `/usr/lib/hsf/modules/osspec'
rm -f *.o *.a
make[1]: Leaving directory `/usr/lib/hsf/modules/osspec'
* compiling (gcc) mod_osspec.c
In file included from mod_osspec.c:51:
../modules/osspec/include/oscompat.h:64:26: linux/tqueue.h: No such file or directory
In file included from /lib/modules/2.6.9-gentoo-r9/build/include/linux/irq.h:20,
from /lib/modules/2.6.9-gentoo-r9/build/include/asm/hardirq.h:6,
from /lib/modules/2.6.9-gentoo-r9/build/include/linux/hardirq.h:6,
from /lib/modules/2.6.9-gentoo-r9/build/include/linux/interrupt.h:11,
from ../modules/osspec/include/oscompat.h:66,
from mod_osspec.c:51:
/lib/modules/2.6.9-gentoo-r9/build/include/asm/irq.h:16:25: irq_vectors.h: No such file or directory
In file included from /lib/modules/2.6.9-gentoo-r9/build/include/asm/hardirq.h:6,
from /lib/modules/2.6.9-gentoo-r9/build/include/linux/hardirq.h:6,
from /lib/modules/2.6.9-gentoo-r9/build/include/linux/interrupt.h:11,
from ../modules/osspec/include/oscompat.h:66,
from mod_osspec.c:51:
/lib/modules/2.6.9-gentoo-r9/build/include/linux/irq.h:70: error: `NR_IRQS' undeclared here (not in a function)
In file included from /lib/modules/2.6.9-gentoo-r9/build/include/linux/irq.h:72,
from /lib/modules/2.6.9-gentoo-r9/build/include/asm/hardirq.h:6,
from /lib/modules/2.6.9-gentoo-r9/build/include/linux/hardirq.h:6,
from /lib/modules/2.6.9-gentoo-r9/build/include/linux/interrupt.h:11,
from ../modules/osspec/include/oscompat.h:66,
from mod_osspec.c:51:
/lib/modules/2.6.9-gentoo-r9/build/include/asm/hw_irq.h:28: error: `NR_IRQ_VECTORS' undeclared here (not in a function)
In file included from mod_osspec.c:51:
../modules/osspec/include/oscompat.h:121:2: #error Preemptible kernel option (CONFIG_PREEMPT) not yet supported. Reconfigure your kernel without it.
In file included from mod_osspec.c:51:
../modules/osspec/include/oscompat.h: In function `cnxthsf_OsModuleUseCountInc':
../modules/osspec/include/oscompat.h:246: warning: `MOD_INC_USE_COUNT' is deprecated (declared at /lib/modules/2.6.9-gentoo-r9/build/include/linux/module.h:555)
../modules/osspec/include/oscompat.h: In function `cnxthsf_OsModuleUseCountDec':
../modules/osspec/include/oscompat.h:251: warning: `MOD_DEC_USE_COUNT' is deprecated (declared at /lib/modules/2.6.9-gentoo-r9/build/include/linux/module.h:567)
make: *** [mod_osspec.o] Error 1
|
|
|
| Back to top |
|
|
zilog80
Tux's lil' helper
Joined: 21 Aug 2003
Posts: 77
Location: Venice Italy
|
| Posted: Wed Dec 15, 2004 11:31 am Post subject: |
|
|
bhe.. ho provato ad emerge la versione masked
| Code: |
Conexant HSF softmodem driver, version 6.03.00lnxt04111200full
|
ho lanciato la compilazione del kernel
| Code: |
z80 etc # hsfconfig -k
Conexant HSF softmodem driver, version 6.03.00lnxt04111200full
If you need license keys, assistance or more information, please go to:
http://www.linuxant.com/
When reporting a problem for the first time, please send
us the file generated by "hsfconfig --dumpdiag".
No pre-built modules for: unknown-unknown linux-2.6.9-gentoo-r9 i686
Trying to automatically build the driver modules...
(this requires a C compiler and proper kernel sources to be installed)
Where is the linux source build directory that matches your running kernel?
[/lib/modules/2.6.9-gentoo-r9/build]
Building modules for kernel 2.6.9-gentoo-r9, using source directory
/lib/modules/2.6.9-gentoo-r9/build. Please wait...
done.
|
nessun errore!! naaaaaaaaaa! impossibile!  |
|
| Back to top |
|
|
zilog80
Tux's lil' helper
Joined: 21 Aug 2003
Posts: 77
Location: Venice Italy
|
| Posted: Wed Dec 15, 2004 12:01 pm Post subject: |
|
|
mi son montato la testa.. cmq ho avviato il modulo
e l'ho inserito anche su
| Code: |
/etc/modules.autoload.d/kernel-2.6
|
ho puntato /dev/modem -> /dev/ttySHSF0
e finalmente ora almeno leggo un MODEM BUSY CON KPPP 
x informativa (ormai poco cambia) ecco i moduli che carica
| Code: |
hsfusbcd2 42320 0
hsfmc97ali 49620 0
hsfmc97via 47576 0
hsfmc97ich 49232 0
hsfpcibasic2 54992 0
hsfserial 19780 5 hsfusbcd2,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2
hsfengine 1218404 1 hsfserial
hsfosspec 79268 7 hsfusbcd2,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2,hsfserial,hsfengine
hsfsoar 51968 4 hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2
|
|
|
| Back to top |
|
|
Vendicatore
Apprentice
Joined: 05 Apr 2004
Posts: 252
Location: Carate Brianza, Italy
|
| Posted: Wed Dec 15, 2004 12:53 pm Post subject: |
|
|
randomaze: per favore quotiamo civilmente...
| zilog80 wrote: | bhe.. ho provato ad emerge la versione masked
...
nessun errore!! naaaaaaaaaa! impossibile! |
Si ma cosi ti funziona a 14.4Kbps, se vuoi che funzioni full speed devi comprarti la licenza linuxant. |
|
| Back to top |
|
|
zilog80
Tux's lil' helper
Joined: 21 Aug 2003
Posts: 77
Location: Venice Italy
|
| Posted: Wed Dec 15, 2004 1:39 pm Post subject: |
|
|
emerge -C hsflinmodem effettuato!!
hemm e ora? nn ho nessuna speranza di usare il mio modem???!?!? |
|
| Back to top |
|
|
Manuelixm
l33t
Joined: 03 Apr 2004
Posts: 832
Location: Brescia
|
| Posted: Wed Dec 15, 2004 2:35 pm Post subject: |
|
|
se questo è il tuo modem
| Quote: |
Modem: Intel Corp. 82801DB AC'97 Modem (rev 03) (prog-if 00 [Generic]) |
come hai postato in alto, basta che scorri la discussione e trovi le informazioni che ti servono.
slmodem non ti dice nulla?
_________________
Linux user#370732 |
|
| Back to top |
|
|
quantumwire
Guru
Joined: 15 Oct 2003
Posts: 403
Location: Lausanne
|
| Posted: Wed Dec 15, 2004 2:51 pm Post subject: |
|
|
E io cho ho questo?
| Code: | 0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) (prog-if 00 [Generic])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1736
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at b400
Region 1: I/O ports at b000 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
|
_________________
HOWTO 1: Spegnere il laptop!
HOWTO 2: Comprimere i DVDs! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
