| View previous topic :: View next topic |
| Author |
Message |
servermonk
Apprentice
Joined: 07 Nov 2003
Posts: 182
Location: MI
|
 Posted: Wed Nov 03, 2004 10:16 pm Post subject: gDesklets-0.3x - coming soon to a portage near you! |
 |
|
Long ago I updated python and my gdesklets stopped working. when I run gdesklets I get this:
| Code: | /usr/bin/gdesklets:65: DeprecationWarning: the 'argc' parameter is optional and deprecated
client.set_restart_command(1, [sys.argv[0]])
gDesklets 0.26.2
Copyright (C) 2003, 2004 The gDesklets Team
This software is licensed under the terms of the GNU GPL.
[/usr/share/gdesklets/Displays/desklet-psidisplays/ping.display]
/usr/lib/python2.3/site-packages/gtk-2.0/gtk/__init__.py:90: GtkDeprecationWarning: gtk.mainiteration is deprecated, use gtk.main_iteration instead
self.warn(message, DeprecationWarning)
[/usr/share/gdesklets/Displays/desklet-psidisplays/ping.display]
[/usr/share/gdesklets/Displays/desklet-psidisplays/border-bottom-right.display]
[/usr/share/gdesklets/Displays/desklet-psidisplays/ping.display]
[/usr/share/gdesklets/Displays/infocon.display]
[/usr/share/gdesklets/Displays/desklet-psidisplays/border-top-right.display]
/usr/lib/python2.3/site-packages/gtk-2.0/gtk/__init__.py:90: GtkDeprecationWarning: gtk.mainloop is deprecated, use gtk.main instead
self.warn(message, DeprecationWarning) |
Then a "The Application "gDeslets" has quit unexpectedly." pop up. I tried runing python-updater but I still get the same error. Anyone know what's going on here?
_________________
Gentoo makes me wanna shoop.
Last edited by servermonk on Sat Nov 06, 2004 3:56 pm; edited 1 time in total |
|
| Back to top |
|
 |
Teetante
Guru
Joined: 02 Mar 2004
Posts: 515
Location: Oldenburg/Germany
|
| Posted: Thu Nov 04, 2004 12:22 am Post subject: |
|
|
Did you upgrade to pyGTK 2.4?
When I did gdesklets stopped working, too, only a downgrade to pygtk 2.2 helped.
_________________
ICQ #81510866 - http://the-gay-bar.com - MSN tante@emptiness.de
Occam's Razor:
-"Entia non sunt multiplicanda praeter necessitatem."- |
|
| Back to top |
|
|
ksskruthic
n00b
Joined: 01 Nov 2004
Posts: 10
|
| Posted: Thu Nov 04, 2004 4:56 am Post subject: How do we downgrade?? |
|
|
Hi,
I just started using Gentoo 2004.2 on x86 (P IV, RAM-256MB, ATI Graphics). I was fascinated by gDesklets and installed gdesklets-core 0.26.2..
Plz answer me these..
(1) Eventhough 0.31 was available at: gdesklets.gnomedesklets.org, emerge installed 0.26.2. eventhough i did ]emerge sync.. why did this happen?
(2)When try to run gDesklets iget this error:
| Code: |
/usr/bin/gdesklets:65: DeprecationWarning: the 'argc' parameter is optional and deprecated
client.set_restart_command(1, [sys.argv[0]])
gDesklets 0.26.2
Copyright (C) 2003, 2004 The gDesklets Team
This software is licensed under the terms of the GNU GPL.
/usr/lib/python2.3/site-packages/gtk-2.0/gtk/__init__.py:90: GtkDeprecationWarning: gtk.mainloop is deprecated, use gtk.main instead
self.warn(message, DeprecationWarning)
|
I've seen in the post that we need to downgrade to pygtk 2.2 in gentoo.. Like, do we have to use the emerge or something else?
Kindly explain to me clearly as i am a Newbie..
Thank You,
_________________
Thank You, 
Regards,
SK |
|
| Back to top |
|
|
Teetante
Guru
Joined: 02 Mar 2004
Posts: 515
Location: Oldenburg/Germany
|
| Posted: Thu Nov 04, 2004 11:28 am Post subject: |
|
|
should do the trick.
It tells portage to merge a special version of the package pygtk, in this case 2.2. That's what the "=" is for.
I hope that helps.
_________________
ICQ #81510866 - http://the-gay-bar.com - MSN tante@emptiness.de
Occam's Razor:
-"Entia non sunt multiplicanda praeter necessitatem."- |
|
| Back to top |
|
|
ksskruthic
n00b
Joined: 01 Nov 2004
Posts: 10
|
| Posted: Thu Nov 04, 2004 8:00 pm Post subject: It still doesnt work... |
|
|
Hi,
Thanx for the reply, I appreciate it !!
But it still doesnt work..
I tried emerge -pv =pygtk2.2 but it says:
| Code: | | emerge: There are no ebuilds to satisy "=pygtk2.2" |
I also did: emerge sync.  SYNC=rsync://rsync.us.gentoo.org/gentoo-portage
(in /etc/make.conf)
Even then its not working.. 
kindly help,
Thank You,
_________________
Thank You,
Regards,
SK |
|
| Back to top |
|
|
servermonk
Apprentice
Joined: 07 Nov 2003
Posts: 182
Location: MI
|
| Posted: Thu Nov 04, 2004 8:09 pm Post subject: |
|
|
try:
| Code: | | emerge =pygtk-2.2.0 |
_________________
Gentoo makes me wanna shoop. |
|
| Back to top |
|
|
ksskruthic
n00b
Joined: 01 Nov 2004
Posts: 10
|
| Posted: Fri Nov 05, 2004 3:01 am Post subject: |
|
|
Thank you for the reply..
ok i've tried it.. but No Luck..  even now it gives the same Error..
Now what... ?? What should i do next??
Thank You,
_________________
Thank You,
Regards,
SK |
|
| Back to top |
|
|
Teetante
Guru
Joined: 02 Mar 2004
Posts: 515
Location: Oldenburg/Germany
|
| Posted: Fri Nov 05, 2004 3:48 am Post subject: |
|
|
Go to
| Code: | | /usr/portage/dev-python/pygtk/ |
Do a
there and look if there is the file .
If it's really not there, I uploaded the file to http://www.informatik.uni-oldenburg.de/~uriel/pygtk-2.2.0.ebuild, you can put it into your portage overlay.
_________________
ICQ #81510866 - http://the-gay-bar.com - MSN tante@emptiness.de
Occam's Razor:
-"Entia non sunt multiplicanda praeter necessitatem."- |
|
| Back to top |
|
|
Obz
Retired Dev
Joined: 11 Jun 2002
Posts: 274
|
| Posted: Fri Nov 05, 2004 4:24 pm Post subject: |
|
|
Hi guys,
gDesklets 0.31 should be in portage next week.
Until then, here's my pre-overlay if you'd like to test it and report bugs here.
Available at http://dev.gentoo.org/~obz/gdesklets-0.3x-overlay.tar.gz.
Sorry for the delay, we're waiting on the python libraries that 0.3x depend on (pyorbit-2.0.1 and gnome-python-2.6.0) to get added to the tree.
Thanks. |
|
| Back to top |
|
|
Teetante
Guru
Joined: 02 Mar 2004
Posts: 515
Location: Oldenburg/Germany
|
| Posted: Fri Nov 05, 2004 4:51 pm Post subject: |
|
|
Thanks for the message Obz! Have been looking for gdesklets 0.31 for some time.
Thank you for your great work!
_________________
ICQ #81510866 - http://the-gay-bar.com - MSN tante@emptiness.de
Occam's Razor:
-"Entia non sunt multiplicanda praeter necessitatem."- |
|
| Back to top |
|
|
servermonk
Apprentice
Joined: 07 Nov 2003
Posts: 182
Location: MI
|
| Posted: Fri Nov 05, 2004 5:29 pm Post subject: |
|
|
Installing now! I'll report back with how it goes.
Thanks Obz!
_________________
Gentoo makes me wanna shoop. |
|
| Back to top |
|
|
servermonk
Apprentice
Joined: 07 Nov 2003
Posts: 182
Location: MI
|
| Posted: Fri Nov 05, 2004 6:17 pm Post subject: |
|
|
Everything compiled fine except the gdesklets-core package.
DOH!
| Code: | make[4]: Entering directory `/var/tmp/portage/gdesklets-core-0.31.1/work/gDesklets-0.31/libdesklets/system'
source='glibtop.c' object='glibtop.lo' libtool=yes \
depfile='.deps/glibtop.Plo' tmpdepfile='.deps/glibtop.TPlo' \
depmode=gcc3 /bin/sh ../../depcomp \
/bin/sh ../../libtool --mode=compile i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/include/pygtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libgtop-2.0 -I/usr/include/python2.3 -L/usr/lib -L/usr/X11R6/lib -lgobject-2.0 -lXau -lgtop-2.0 -lglib-2.0 -O3 -march=athlon-xp -fomit-frame-pointer -funroll-loops -pipe -c -o glibtop.lo `test -f 'glibtop.c' || echo './'`glibtop.c
i686-pc-linux-gnu-gcc -o libgtop_const -I/usr/include/pygtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libgtop-2.0 -L/usr/lib -L/usr/X11R6/lib -lgobject-2.0 -lXau -lgtop-2.0 -lglib-2.0 libgtop_const.c
cp -f glibtop_tmpl.i glibtop.i && ./libgtop_const >> glibtop.i
swig -python glibtop.i
make[4]: swig: Command not found
make[4]: *** [glibtop_wrap.c] Error 127
make[4]: *** Waiting for unfinished jobs....
mkdir .libs
i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/include/pygtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libgtop-2.0 -I/usr/include/python2.3 -L/usr/lib -L/usr/X11R6/lib -lgobject-2.0 -lXau -lgtop-2.0 -lglib-2.0 -O3 -march=athlon-xp -fomit-frame-pointer -funroll-loops -pipe -c glibtop.c -MT glibtop.lo -MD -MP -MF .deps/glibtop.TPlo -fPIC -DPIC -o .libs/glibtop.o
i686-pc-linux-gnu-gcc: -lgobject-2.0: linker input file unused because linking not done
i686-pc-linux-gnu-gcc: -lXau: linker input file unused because linking not done
i686-pc-linux-gnu-gcc: -lgtop-2.0: linker input file unused because linking not done
i686-pc-linux-gnu-gcc: -lglib-2.0: linker input file unused because linking not done
make[4]: Leaving directory `/var/tmp/portage/gdesklets-core-0.31.1/work/gDesklets-0.31/libdesklets/system'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/var/tmp/portage/gdesklets-core-0.31.1/work/gDesklets-0.31/libdesklets/system'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/var/tmp/portage/gdesklets-core-0.31.1/work/gDesklets-0.31/libdesklets'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/gdesklets-core-0.31.1/work/gDesklets-0.31'
make: *** [all] Error 2
|
_________________
Gentoo makes me wanna shoop. |
|
| Back to top |
|
|
rhill
Retired Dev
Joined: 22 Oct 2004
Posts: 1629
Location: sk.ca
|
| Posted: Fri Nov 05, 2004 6:21 pm Post subject: |
|
|
i was just about to post that 
i've heard the name swig in the last couple days. i think it's a library.
here it is:
| Code: | -=[ /etc ]=- # qpkg -i swig
dev-lang/swig-1.3.22
Simplified Wrapper and Interface Generator [ http://www.swig.org/ ] |
Last edited by rhill on Fri Nov 05, 2004 6:49 pm; edited 1 time in total |
|
| Back to top |
|
|
servermonk
Apprentice
Joined: 07 Nov 2003
Posts: 182
Location: MI
|
| Posted: Fri Nov 05, 2004 6:46 pm Post subject: |
|
|
After I installed swig the gdesklets-core package compiled just swimingly. I'm not at that workstation right now to check if the gdesklets are actually working again though  It'll be another 2-3 hours, I'll test them and report back.
_________________
Gentoo makes me wanna shoop. |
|
| Back to top |
|
|
rhill
Retired Dev
Joined: 22 Oct 2004
Posts: 1629
Location: sk.ca
|
| Posted: Fri Nov 05, 2004 7:57 pm Post subject: |
|
|
running great here. this is the first version that actually works on my box.
thanks  |
|
| Back to top |
|
|
servermonk
Apprentice
Joined: 07 Nov 2003
Posts: 182
Location: MI
|
| Posted: Fri Nov 05, 2004 8:58 pm Post subject: |
|
|
Well, it's "working" over here, however I'm still seeing the same problem I was having with the older version. My desktop switching slows to a crawl everytime the desklets are running. Every time I hotkey to another desktop it sits for about a second then switches.
It's fairly annoying
_________________
Gentoo makes me wanna shoop. |
|
| Back to top |
|
|
Obz
Retired Dev
Joined: 11 Jun 2002
Posts: 274
|
| Posted: Sat Nov 06, 2004 2:09 am Post subject: |
|
|
And that's why I like doing pre-releases, so you guys can find the bits I miss. Thanks a lot for the report, I've updated the overlay tarball and placed it in the same place, http://dev.gentoo.org/~obz/gdesklets-0.3x-overlay.tar.gz.
Thanks again guys.
servermonk: I'll try and do some research on that, what window manager are you running? Fast box? are you using composite? |
|
| Back to top |
|
|
servermonk
Apprentice
Joined: 07 Nov 2003
Posts: 182
Location: MI
|
| Posted: Sat Nov 06, 2004 2:31 am Post subject: |
|
|
Obz:
Using Fluxbox 0.9.10-r4
AMD Athlon(tm) XP 2500+
1G DDR 2700
USE="X gtk2 gnome apache2"
CFLAGS="-O3 -march=athlon-xp -fomit-frame-pointer -funroll-loops -pipe"
would anything else help?
_________________
Gentoo makes me wanna shoop. |
|
| Back to top |
|
|
Obz
Retired Dev
Joined: 11 Jun 2002
Posts: 274
|
| Posted: Sat Nov 06, 2004 2:59 am Post subject: |
|
|
Got a fast enough box, do you think you could try with metacity? Just might isolate the problem. It's possible to run metacity without GNOME if you don't like gnome. Or instead, you could try openbox, I'm fairly sure openbox worked fine last time I tested.
Thanks. |
|
| Back to top |
|
|
ksskruthic
n00b
Joined: 01 Nov 2004
Posts: 10
|
| Posted: Sat Nov 06, 2004 3:25 am Post subject: Hi.. |
|
|
obz:
Hi obz. u r doing a great Job.. Good work.. Its nice to see this forum REAL Active..
Well, i just saw ur latest post and downloaded the latest tar.gz and added the unzipped folder to PORT_OVERLAY dir in /etc/make.conf and EMERGE =gdesklets-core.0.31.1 .. Everything workd fine until it EMERGed the 3 0f 3 package when the following error occured:
| Code: |
swig -python glibtop.i
make[4]: swig: Command not found
make[4]: *** [glibtop_wrap.c] Error 127
make[4]: *** Waiting for unfinished jobs....
mkdir .libs
i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/include/pygtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libgtop-2.0 -I/usr/include/python2.3 -L/usr/lib -L/usr/X11R6/lib -lgobject-2.0 -lXau -lgtop-2.0 -lglib-2.0 -march=pentium4 -O3 -pipe -funroll-loops -fomit-frame-pointer -c glibtop.c -MT glibtop.lo -MD -MP -MF .deps/glibtop.TPlo -fPIC -DPIC -o .libs/glibtop.o
i686-pc-linux-gnu-gcc: -lgobject-2.0: linker input file unused because linking not done
i686-pc-linux-gnu-gcc: -lXau: linker input file unused because linking not done
i686-pc-linux-gnu-gcc: -lgtop-2.0: linker input file unused because linking not done
i686-pc-linux-gnu-gcc: -lglib-2.0: linker input file unused because linking not done
make[4]: Leaving directory `/var/tmp/portage/gdesklets-core-0.31.1/work/gDesklets-0.31/libdesklets/system'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/var/tmp/portage/gdesklets-core-0.31.1/work/gDesklets-0.31/libdesklets/system'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/var/tmp/portage/gdesklets-core-0.31.1/work/gDesklets-0.31/libdesklets'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/gdesklets-core-0.31.1/work/gDesklets-0.31'
make: *** [all] Error 2
!!! ERROR: gnome-extra/gdesklets-core-0.31.1 failed.
!!! Function gnome2_src_compile, Line 40, Exitcode 2
!!! compile failure
!!! If you need support, post the topmost build error, NOT this status message.
|
So.. as said in the previous post (by "dirtyepic") do i have to download some package like swig? If so.. how do i do that?? Sorry to bother U..i am a n00b.. kindly help!!
teetante:
I tried to downgrade to pygtk2.2.0 (as the ebuild was there in /usr/portage/dev-python/pygtk) but when i run gdesklets, it says:
Its something like segmentation Fault or segmentatoin Failed
thx for ur help,
_________________
Thank You,
Regards,
SK |
|
| Back to top |
|
|
servermonk
Apprentice
Joined: 07 Nov 2003
Posts: 182
Location: MI
|
| Posted: Sat Nov 06, 2004 3:34 am Post subject: |
|
|
After I got that swig error I just did:
and after that finished tried again and it compiled without flaw
_________________
Gentoo makes me wanna shoop. |
|
| Back to top |
|
|
Obz
Retired Dev
Joined: 11 Jun 2002
Posts: 274
|
| Posted: Sat Nov 06, 2004 4:11 am Post subject: |
|
|
Yeh, that swig missing dependency was my fault, it should be in the new tarball (which replaced the old one I had up).
To be clear, you need the following versions of the packages (I think - these aren't listed in the configure.in, nor in the README)
pygtk-2.4 (allready in portage)
gnome-python-2.6 (included in the overlay)
pyorbit-2.0.1 (included in the overlay)
Thanks. |
|
| Back to top |
|
|
ksskruthic
n00b
Joined: 01 Nov 2004
Posts: 10
|
| Posted: Sat Nov 06, 2004 5:11 am Post subject: thx 2 all of u |
|
|
hi,
thanx to all of u..u were of great help, gDesklets work  .. but actually GoodWeather display isnt working...
the error says the display file contains invalid data
| Code: |
A display could not be configured properly. It will most likely be broken and you should consider removing it.
|
| Code: |
Traceback (most recent call last):
File "/usr/share/gdesklets/factory/DisplayFactory.py", line 93, in create_display
dsp.new_child(childtype, settings, children)
File "/usr/share/gdesklets/display/Display.py", line 201, in new_child
self.__group.new_child(t, s, c)
File "/usr/share/gdesklets/display/TargetGroup.py", line 67, in new_child
child = ContainerTarget.new_child(self, childtype, settings, children)
File "/usr/share/gdesklets/display/ContainerTarget.py", line 75, in new_child
child = targetregistry.create(childtype, self)
File "/usr/share/gdesklets/display/targetregistry.py", line 58, in create
raise KeyError("Unknown target type \"%s\"." % name)
KeyError: u'Unknown target type "metha".'
|
Moreover if i try to remove it, it says Permission denied..
Also i re-installed it.. but the same problem persists...
what shud i do?
Thanks in Advance..
_________________
Thank You,
Regards,
SK |
|
| Back to top |
|
|
Obz
Retired Dev
Joined: 11 Jun 2002
Posts: 274
|
| Posted: Sat Nov 06, 2004 10:48 am Post subject: |
|
|
servermonk: would you mind changing the topic of this thread to "gDesklets-0.3x - coming soon to a portage near you"
Or something similar, just to reflect the changing nature of the discussion.
Thanks. |
|
| Back to top |
|
|
servermonk
Apprentice
Joined: 07 Nov 2003
Posts: 182
Location: MI
|
| Posted: Sat Nov 06, 2004 3:57 pm Post subject: subject change request |
|
|
Obz: Done and done!
Thanks for all your hard work! gdesklets are the hotness!
_________________
Gentoo makes me wanna shoop. |
|
| Back to top |
|
|
|
Desktop Environments
