| View previous topic :: View next topic |
| Author |
Message |
antoine
n00b
Joined: 06 Oct 2004
Posts: 67
Location: Brussels
|
 Posted: Thu Nov 04, 2004 5:48 pm Post subject: [BOOT] Problème bizarre (résolu) |
 |
|
Bonjour,
Depuis mon dernier update, j'ai un petit problème au démarrage.
J'ai le message :
| Code: |
* Could not create needed directory '/var/lib/init.d/softscripts' !
mv: cannot stat '/var/lib/init.d/softscripts': No such file or directory.
|
Qu'est-ce que ce répertoire ?
Quel script essaye de créer de répertoire et n'y arrive pas ?
Bref, aidez moi 
Last edited by antoine on Sat Nov 13, 2004 6:30 pm; edited 1 time in total |
|
| Back to top |
|
 |
jpwalker
Guru
Joined: 12 Jul 2004
Posts: 503
Location: Annecy - 74 - France - In Tartiflette We Trust ;-)
|
| Posted: Fri Nov 05, 2004 10:28 am Post subject: |
|
|
Montres nous plus de lignes de message. C'est un peu limite...
Affiches nous ça
_________________
JPW@lker
Ride & Enjoy
 |
|
| Back to top |
|
|
antoine
n00b
Joined: 06 Oct 2004
Posts: 67
Location: Brussels
|
| Posted: Fri Nov 05, 2004 10:37 am Post subject: |
|
|
Salut,
Le rc-status -s donne :
| Code: | Runlevel: all
alsasound [ started ]
bootmisc [ started ]
checkfs [ started ]
checkroot [ started ]
clock [ started ]
consolefont [ started ]
crypto-loop [ off ]
cupsd [ off ]
dcron [ started ]
domainname [ off ]
esound [ off ]
famd [ off ]
gpm [ off ]
hdparm [ off ]
hostname [ started ]
hotplug [ started ]
keymaps [ started ]
lisa [ off ]
lm_sensors [ off ]
local [ started ]
localmount [ started ]
modules [ started ]
net.eth0 [ started ]
net.eth1 [ off ]
net.lo [ started ]
netmount [ started ]
nscd [ off ]
numlock [ off ]
portmap [ off ]
reslisa [ off ]
rmnologin [ started ]
rsyncd [ off ]
samba [ started ]
serial [ started ]
sshd [ off ]
syslog-ng [ started ]
urandom [ started ]
xdm [ started ]
xfs [ off ]
|
Je veux bien afficher plus de ligne de message, mais je ne sais pas comment les logger.
Merci |
|
| Back to top |
|
|
antoine
n00b
Joined: 06 Oct 2004
Posts: 67
Location: Brussels
|
| Posted: Fri Nov 05, 2004 10:42 am Post subject: |
|
|
Salut,
J'ai aussi fait :
| Code: | tux init.d # cat * | grep softscripts
for x in softscripts snapshot options started
[ -L "${svcdir}/softscripts.new/${x}" ]
|
Donc ça voudrait dire que ça ne vient pas des scripts de démarrage ? |
|
| Back to top |
|
|
jpwalker
Guru
Joined: 12 Jul 2004
Posts: 503
Location: Annecy - 74 - France - In Tartiflette We Trust ;-)
|
| Posted: Fri Nov 05, 2004 10:43 am Post subject: |
|
|
Affiches nous un
[EDIT]Désolé  Cette commande ne nous servira pas beaucoup, trop mort le JP 
Je cherche...
_________________
JPW@lker
Ride & Enjoy
Last edited by jpwalker on Fri Nov 05, 2004 10:47 am; edited 1 time in total |
|
| Back to top |
|
|
antoine
n00b
Joined: 06 Oct 2004
Posts: 67
Location: Brussels
|
| Posted: Fri Nov 05, 2004 10:46 am Post subject: |
|
|
Salut,
Et aussi :
| Code: | tux sbin # cat runscript.sh | grep softscripts
[ -L "${svcdir}/softscripts.new/${x}" ]
|
Là non plus on ne voit pas apparaître de répertoire softscripts. 
J'ai aussi essayé de supprimer le répertoire incriminé, et il est recréé au démarrage suivant... |
|
| Back to top |
|
|
antoine
n00b
Joined: 06 Oct 2004
Posts: 67
Location: Brussels
|
| Posted: Fri Nov 05, 2004 10:48 am Post subject: |
|
|
Voilà le dmesg :
| Code: | Linux version 2.6.9 (root@tux) (gcc version 3.4.2 (Gentoo Linux 3.4.2-r2, ssp-3.4.1-1, pie-8.7.6.5)) #11 Sun Oct 24 21:31:39 Local time zone must be set--see zic man
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f75e0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7640
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hde4 hdg=noprobe video=vesafb:ywrap,mtrr vga=0x318
ide_setup: hdg=noprobe
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2405.974 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514620k/524224k available (2348k kernel code, 9064k reserved, 1420k data, 168k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4751.36 BogoMIPS (lpj=2375680)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Unknown CPU Type stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... failed.
...trying to set up timer as ExtINT IRQ... works.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 23 (level, high) -> IRQ 23
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 22
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 21
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 20
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high) -> IRQ 22
ACPI: PCI Interrupt Link [APCI] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 21 (level, high) -> IRQ 21
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 20 (level, high) -> IRQ 20
ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 22 (level, high) -> IRQ 22
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 17 (level, high) -> IRQ 17
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 18 (level, high) -> IRQ 18
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 19 (level, high) -> IRQ 19
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.20 [Flags: R/O].
vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, size 6144k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:eef0
vesafb: pmi: set display start = c00cef26, set palette = c00cef90
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1536
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xd8000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: _NEC DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
SiI3112 Serial ATA: IDE controller at PCI slot 0000:01:0b.0
ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 18 (level, high) -> IRQ 18
SiI3112 Serial ATA: chipset revision 2
SiI3112 Serial ATA: 100% native mode on irq 18
ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hde: Maxtor 6Y160M0, ATA DISK drive
ide2 at 0xe081c080-0xe081c087,0xe081c08a on irq 18
Probing IDE interface ide3...
Probing IDE interface ide1...
Probing IDE interface ide3...
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hde: max request size: 64KiB
hde: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63
hde: cache flushes supported
hde: hde1 hde2 hde3 hde4
hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 20
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 20, pci mem e081e000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 22
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 22, pci mem e0832000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 21
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 21, pci mem e0834000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
i2c /dev entries driver
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 168k freed
kjournald starting. Commit interval 5 seconds
Adding 506036k swap on /dev/hde3. Priority:-1 extents:1
EXT3 FS on hde4, internal journal
ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 17 (level, high) -> IRQ 17
ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 17 (level, high) -> IRQ 17
eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
PrefPort:A RlmtMode:Check Link State
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 19 (level, high) -> IRQ 19
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul 27 07:55:38 PDT 2004
NTFS-fs warning (device hde1): parse_options(): Option iocharset is deprecated.Please use option nls=<charsetname> in the future.
NTFS volume version 3.1.
NTFS-fs warning (device hde2): parse_options(): Option iocharset is deprecated.Please use option nls=<charsetname> in the future.
NTFS volume version 3.1.
EXT3 FS on hde4, internal journal
EXT3 FS on hde4, internal journal
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 20 (level, high) -> IRQ 20
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49516 usecs
intel8x0: clocking to 47378
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
scatter-gather: enabled
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode
|
|
|
| Back to top |
|
|
jpwalker
Guru
Joined: 12 Jul 2004
Posts: 503
Location: Annecy - 74 - France - In Tartiflette We Trust ;-)
|
| Posted: Fri Nov 05, 2004 10:54 am Post subject: |
|
|
Quel stage as-tu utilisé ?
_________________
JPW@lker
Ride & Enjoy
|
|
| Back to top |
|
|
antoine
n00b
Joined: 06 Oct 2004
Posts: 67
Location: Brussels
|
| Posted: Fri Nov 05, 2004 10:58 am Post subject: |
|
|
| J'ai utilisé une stage 1 et je suis en ~x86. |
|
| Back to top |
|
|
jpwalker
Guru
Joined: 12 Jul 2004
Posts: 503
Location: Annecy - 74 - France - In Tartiflette We Trust ;-)
|
| Posted: Fri Nov 05, 2004 11:02 am Post subject: |
|
|
Je ne sais pas si on peux réinstaller un stage après une installe ? Faudrait voir, ça peut venir de ça d'après certains messages trouver avec Google... 
A prendre avec prudence
_________________
JPW@lker
Ride & Enjoy
|
|
| Back to top |
|
|
antoine
n00b
Joined: 06 Oct 2004
Posts: 67
Location: Brussels
|
| Posted: Fri Nov 05, 2004 11:06 am Post subject: |
|
|
Tu pense que je devrais réinstaller ma gentoo ?
Parce qu'elle fonctionne nickel, c'est juste un petit message énervant au démarrage
Enfin, je suis pas chez moi ce week-end, donc c'est chose possible 
EDIT: Il faudrait que je trouve le script qui essaye de créer ce satané répertoire pour pouvoir identifier le problème avec plus de précision...
Last edited by antoine on Fri Nov 05, 2004 11:10 am; edited 1 time in total |
|
| Back to top |
|
|
sireyessire
Advocate
Joined: 20 Mar 2003
Posts: 2991
Location: back in Paris, France
|
| Posted: Fri Nov 05, 2004 11:09 am Post subject: |
|
|
| jpwalker wrote: | Je ne sais pas si on peux réinstaller un stage après une installe ? Faudrait voir, ça peut venir de ça d'après certains messages trouver avec Google...
A prendre avec prudence |
oui tu peux mais ça veut dire quasi tout recompiler dans la foulée, ce qui est un peu chiant.
Je me demande 2 choses qui ont surement rien à voir:
1) qu'est ce que tu fous avec le driver microcode d'intel? tu veux reprogrammer ton proc ou pas?
2) tu as mis un /etc/localtime? car au début il est pas super content:
21:31:39 Local time zone must be set--see zic man
sinon pour plus d'infos, c'est quoi ta config?
_________________
I never think of the future. It comes soon enough.
Albert Einstein
Try simpler first
Shockley |
|
| Back to top |
|
|
antoine
n00b
Joined: 06 Oct 2004
Posts: 67
Location: Brussels
|
| Posted: Fri Nov 05, 2004 11:15 am Post subject: |
|
|
| sireyessire wrote: |
oui tu peux mais ça veut dire quasi tout recompiler dans la foulée, ce qui est un peu chiant.
Je me demande 2 choses qui ont surement rien à voir:
1) qu'est ce que tu fous avec le driver microcode d'intel? tu veux reprogrammer ton proc ou pas?
2) tu as mis un /etc/localtime? car au début il est pas super content:
21:31:39 Local time zone must be set--see zic man
sinon pour plus d'infos, c'est quoi ta config? |
1) J'ai activé cette option dans le kernel car mon processeur la supporte, sans trop me demander si elle me servirait ou pas.
2) Oui, j'ai un /etc/localtime, c'est vrai que ce message est bizzare.
Sinon, tu veux ma config matérielle ou logicielle ? |
|
| Back to top |
|
|
sireyessire
Advocate
Joined: 20 Mar 2003
Posts: 2991
Location: back in Paris, France
|
| Posted: Fri Nov 05, 2004 11:15 am Post subject: |
|
|
et si tu lances en root un /etc/init.d/depscan.sh il se passe quoi?, car à priori il intervient dans la création de ce répertoire
_________________
I never think of the future. It comes soon enough.
Albert Einstein
Try simpler first
Shockley |
|
| Back to top |
|
|
antoine
n00b
Joined: 06 Oct 2004
Posts: 67
Location: Brussels
|
| Posted: Fri Nov 05, 2004 11:19 am Post subject: |
|
|
Ca se passe bien :
| Code: | tux etc # /etc/init.d/depscan.sh
* Caching service dependencies ... [ ok ]
|
|
|
| Back to top |
|
|
sireyessire
Advocate
Joined: 20 Mar 2003
Posts: 2991
Location: back in Paris, France
|
| Posted: Fri Nov 05, 2004 11:20 am Post subject: |
|
|
| antoine wrote: | Ca se passe bien :
| Code: | tux etc # /etc/init.d/depscan.sh
* Caching service dependencies ... [ ok ]
|
|
bon et un ls /var/init.d/ donne quoi maintenant ?
_________________
I never think of the future. It comes soon enough.
Albert Einstein
Try simpler first
Shockley |
|
| Back to top |
|
|
antoine
n00b
Joined: 06 Oct 2004
Posts: 67
Location: Brussels
|
| Posted: Fri Nov 05, 2004 11:24 am Post subject: |
|
|
ls /var/init.d ne donne rien :
| Code: | tux etc # ls -l /var/init.d
ls: /var/init.d: Aucun fichier ou répertoire de ce type
|
au contraire de ls /var/lib/init.d
| Code: | tux etc # ls -l /var/lib/init.d
total 68
-rw------- 1 root root 27275 nov 5 12:18 depcache
-rw-r--r-- 1 root root 12486 nov 5 12:18 deptree
-rw-r--r-- 1 root root 3688 nov 3 10:56 envcache
drwxr-xr-x 3 root root 4096 nov 5 11:32 options
drwxr-xr-x 2 root root 4096 nov 5 11:32 snapshot
-rw-r--r-- 1 root root 8 nov 5 11:32 softlevel
drwxr-xr-x 2 root root 4096 nov 5 11:32 softscripts
drwxr-xr-x 2 root root 4096 nov 5 11:32 started
|
EDIT: l'heure de création (ou de modification ?) du répertoire correspond à l'heure de mon dernier boot. |
|
| Back to top |
|
|
sireyessire
Advocate
Joined: 20 Mar 2003
Posts: 2991
Location: back in Paris, France
|
| Posted: Fri Nov 05, 2004 11:28 am Post subject: |
|
|
| antoine wrote: | ls /var/init.d ne donne rien :
[code]tux etc # ls -l /var/init.d
ls: /var/init.d: Aucun fichier ou répertoire de ce type
total 68
-rw------- 1 root root 27275 nov 5 12:18 depcache
-rw-r--r-- 1 root root 12486 nov 5 12:18 deptree
-rw-r--r-- 1 root root 3688 nov 3 10:56 envcache
drwxr-xr-x 3 root root 4096 nov 5 11:32 options
drwxr-xr-x 2 root root 4096 nov 5 11:32 snapshot
-rw-r--r-- 1 root root 8 nov 5 11:32 softlevel
drwxr-xr-x 2 root root 4096 nov 5 11:32 softscripts
drwxr-xr-x 2 root root 4096 nov 5 11:32 started
EDIT: l'heure de création (ou de modification ?) du répertoire correspond à l'heure de mon dernier boot. |
et dedans il y a quoi ?
pour les dates moi aussi ça correspond au dernier boot mais c'est normal ça.
_________________
I never think of the future. It comes soon enough.
Albert Einstein
Try simpler first
Shockley |
|
| Back to top |
|
|
antoine
n00b
Joined: 06 Oct 2004
Posts: 67
Location: Brussels
|
| Posted: Fri Nov 05, 2004 11:44 am Post subject: |
|
|
Il y a des liens symboliques vers les scripts de /etc/init.d :
| Code: | tux etc # ls -l /var/lib/init.d/softscripts/
total 0
lrwxr-xr-x 1 root root 21 nov 5 11:32 alsasound -> /etc/init.d/alsasound
lrwxr-xr-x 1 root root 20 nov 5 11:32 bootmisc -> /etc/init.d/bootmisc
lrwxr-xr-x 1 root root 19 nov 5 11:32 checkfs -> /etc/init.d/checkfs
lrwxr-xr-x 1 root root 21 nov 5 11:32 checkroot -> /etc/init.d/checkroot
lrwxr-xr-x 1 root root 17 nov 5 11:32 clock -> /etc/init.d/clock
lrwxr-xr-x 1 root root 23 nov 5 11:32 consolefont -> /etc/init.d/consolefont
lrwxr-xr-x 1 root root 17 nov 5 11:32 dcron -> /etc/init.d/dcron
lrwxr-xr-x 1 root root 20 nov 5 11:32 hostname -> /etc/init.d/hostname
lrwxr-xr-x 1 root root 19 nov 5 11:32 hotplug -> /etc/init.d/hotplug
lrwxr-xr-x 1 root root 19 nov 5 11:32 keymaps -> /etc/init.d/keymaps
lrwxr-xr-x 1 root root 17 nov 5 11:32 local -> /etc/init.d/local
lrwxr-xr-x 1 root root 22 nov 5 11:32 localmount -> /etc/init.d/localmount
lrwxr-xr-x 1 root root 19 nov 5 11:32 modules -> /etc/init.d/modules
lrwxr-xr-x 1 root root 20 nov 5 11:32 net.eth0 -> /etc/init.d/net.eth0
lrwxr-xr-x 1 root root 18 nov 5 11:32 net.lo -> /etc/init.d/net.lo
lrwxr-xr-x 1 root root 20 nov 5 11:32 netmount -> /etc/init.d/netmount
lrwxr-xr-x 1 root root 21 nov 5 11:32 rmnologin -> /etc/init.d/rmnologin
lrwxr-xr-x 1 root root 17 nov 5 11:32 samba -> /etc/init.d/samba
lrwxr-xr-x 1 root root 18 nov 5 11:32 serial -> /etc/init.d/serial
lrwxr-xr-x 1 root root 21 nov 5 11:32 syslog-ng -> /etc/init.d/syslog-ng
lrwxr-xr-x 1 root root 19 nov 5 11:32 urandom -> /etc/init.d/urandom
lrwxr-xr-x 1 root root 15 nov 5 11:32 xdm -> /etc/init.d/xdm
|
EDIT: Pour les dates je me disais que c'était bizarre que le système dise qu'il n'arrive pas à créer le répertoire alors que, dans les fait, il y arrive |
|
| Back to top |
|
|
sireyessire
Advocate
Joined: 20 Mar 2003
Posts: 2991
Location: back in Paris, France
|
| Posted: Fri Nov 05, 2004 11:48 am Post subject: |
|
|
c'est bon ça a l'air de marcher, donc soit tu t'en fous de ces warnings
sinon tu essaies de ré-emerger baselayout et tu fais bien le etc-update dans la foulée
_________________
I never think of the future. It comes soon enough.
Albert Einstein
Try simpler first
Shockley |
|
| Back to top |
|
|
antoine
n00b
Joined: 06 Oct 2004
Posts: 67
Location: Brussels
|
| Posted: Fri Nov 05, 2004 12:30 pm Post subject: |
|
|
J'ai ré-emergé baselayout et fait le etc-update, mais pas de changement.
Bah, c'est pas bien grave, l'essentiel c'est que ça marche
Merci à tous ceux qui ont essayé de m'aider  |
|
| Back to top |
|
|
Trevoke
Advocate
Joined: 04 Sep 2004
Posts: 4099
Location: NY, NY
|
| Posted: Fri Nov 05, 2004 2:07 pm Post subject: |
|
|
Ben ecoute tu le creees ce satane repertoire et puis voila!
_________________
Votre moment detente
What is the nature of conflict? |
|
| Back to top |
|
|
antoine
n00b
Joined: 06 Oct 2004
Posts: 67
Location: Brussels
|
| Posted: Fri Nov 05, 2004 2:13 pm Post subject: |
|
|
| Trevoke wrote: | | Ben ecoute tu le creees ce satane repertoire et puis voila! |
Ben justement, qu'il soit créé ou non, il me renvoie le même message d'erreur |
|
| Back to top |
|
|
antoine
n00b
Joined: 06 Oct 2004
Posts: 67
Location: Brussels
|
| Posted: Sat Nov 13, 2004 6:30 pm Post subject: |
|
|
Problème résolu suite à la sortie du dernier baselayout.
Comme quoi il fallait pas désepérer |
|
| Back to top |
|
|
|
French
