| View previous topic :: View next topic |
| Author |
Message |
zUgLiO
l33t
Joined: 12 Aug 2003
Posts: 754
Location: Ferrara (Italy)
|
 Posted: Tue Nov 16, 2004 8:18 pm Post subject: [OT] Problema hardware! [RISOLTO] |
 |
|
Ho notato che il dma nel secondo hd dopo diversi errori tipo questo
| Code: |
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
|
viene disabilitato.
Ho pensato ad un imminente cedimento dell'hd! Ho fatto un backup e ho messo al suo posto un Maxtor da 80 gb..Ma al riavvio sorpresa sorpresa
| Code: |
Probing IDE interface ide0...
hda: MAXTOR 6L060J3, ATA DISK drive
hdb: MaHtOr, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Pioneer DVD-ROM ATAPIModel DVD-500M 010, ATAPI CD/DVD-ROM drive
hdd: PHILIPS DVDR1640P, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 117266688 sectors (60040 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdb: max request size: 128KiB
hdb: 4127760 sectors (2113 MB), CHS=4095/16/63, UDMA(133)
hdb: cache flushes not supported
hdb:hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
end_request: I/O error, dev hdb, sector 0
Buffer I/O error on device hdb, logical block 0
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
fbsplash: switching to verbose mode
ide0: reset: success
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
end_request: I/O error, dev hdb, sector 0
Buffer I/O error on device hdb, logical block 0
unable to read partition table
|
Avete notato il
Se lancio cfdisk /dev/hdb mi risponde cosi:
| Code: |
No partition table or unknown signature on partition table
Do you wish to start with a zero table [y/N]
|
Cosa strana dato che lo avevo appena formattato da un altro pc..vabbe rispondo y, ma i drammi non sono finiti:
| Code: |
hdb1 Primaria Linux 2113,42
|
Me lo vede come se fosse da 2 gb! Ma cosa sta succedendo secondo voi? Mi sta impazzendo la MB?
Scusate per la lunghezza del Post 
Edit:
| Quote: | | hdb: MaHtOr, ATA DISK drive |
MaHtOr?
_________________
voglio poi dire che il tempo mi avrà fatto abituare,
ma io non trovo nemmeno brutta la stiva buia di questa nave
Last edited by zUgLiO on Tue Nov 16, 2004 9:00 pm; edited 1 time in total |
|
| Back to top |
|
 |
gutter
Bodhisattva
Joined: 13 Mar 2004
Posts: 7162
Location: Aarau, Aargau, Switzerland
|
| Posted: Tue Nov 16, 2004 8:45 pm Post subject: |
|
|
Hai provato a cambiare cavetto IDE 
_________________
Registered as User #281564 and Machines #163761 |
|
| Back to top |
|
|
zUgLiO
l33t
Joined: 12 Aug 2003
Posts: 754
Location: Ferrara (Italy)
|
| Posted: Tue Nov 16, 2004 9:00 pm Post subject: |
|
|
| gutter wrote: | | Hai provato a cambiare cavetto IDE |
 adesso è tornato tutto normale....
_________________
voglio poi dire che il tempo mi avrà fatto abituare,
ma io non trovo nemmeno brutta la stiva buia di questa nave
|
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30954
Location: here
|
| Posted: Tue Nov 16, 2004 9:01 pm Post subject: |
|
|
| zUgLiO wrote: | | adesso è tornato tutto normale.... |
Ma che facine fai??? Io metterei queste 
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
zUgLiO
l33t
Joined: 12 Aug 2003
Posts: 754
Location: Ferrara (Italy)
|
| Posted: Tue Nov 16, 2004 9:03 pm Post subject: |
|
|
| fedeliallalinea wrote: |
Ma che facine fai??? |
Sono per l'inutilità di questo post 
_________________
voglio poi dire che il tempo mi avrà fatto abituare,
ma io non trovo nemmeno brutta la stiva buia di questa nave
|
|
| Back to top |
|
|
gutter
Bodhisattva
Joined: 13 Mar 2004
Posts: 7162
Location: Aarau, Aargau, Switzerland
|
| Posted: Tue Nov 16, 2004 9:05 pm Post subject: |
|
|
| zUgLiO wrote: | | fedeliallalinea wrote: |
Ma che facine fai??? |
Sono per l'inutilità di questo post |
Non ti preoccupare a volte non si pensa alle cose più ovvie. 
_________________
Registered as User #281564 and Machines #163761 |
|
| Back to top |
|
|
|
Forum italiano (Italian) 
