| View previous topic :: View next topic |
| Author |
Message |
l1quid_dark
n00b
Joined: 17 Nov 2004
Posts: 10
|
 Posted: Tue Mar 21, 2006 9:10 pm Post subject: PVR-350 with ivtv 0.4.2 and kernel 2.6.16 problems |
 |
|
I recently upgraded the kernel to 2.6.16 and ivtv to 0.4.2 and cannot get my PVR-350 to work. In dmesg I am getting tuner type not set. All I get is snow when I view the output from the card. It doesn't matter what I try with ivtv-tune.
I have compiled support into the kernel for video 4 linux.
I have the following in /etc/modules.d/ivtv
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
If I try setting: options tuner type=x I get the following error in dmesg:
tuner: Unknown parameter `type'
ivtv0: Failed to load module tuner
Output from dmesg is:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.2 (tagged release) loading
ivtv: Linux version: 2.6.16 preempt K7 gcc-3.3
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 350 card (cx23415 based)
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] -> GSI 7 (level, low) -> IRQ
7
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tveeprom 2-0050: Hauppauge model 48135, rev J324, serial# xxxxxx
tveeprom 2-0050: tuner model is Philips FM1246 (idx 24, type 1)
tveeprom 2-0050: TV standards PAL(I) (eeprom 0x10)
tveeprom 2-0050: audio processor is MSP4418 (idx 25)
tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
tveeprom 2-0050: has radio, has IR remote
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
saa7127 2-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]
msp3400 2-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
msp3400 2-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect and aut
oselect
ivtv0: i2c attach to card #0 ok [client=MSP4418G-A2, addr=40]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02040011
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner 2-0061: tuner type not set
tuner 2-0061: tuner type not set
ivtv0: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ==================== |
|
| Back to top |
|
 |
phsdv
Guru
Joined: 13 Mar 2005
Posts: 372
Location: Europe
|
| Posted: Tue Mar 21, 2006 9:35 pm Post subject: |
|
|
| It won't work with the current version. For kernel 2.6.16 you need ivtv 0.6.0 which will (hopefully) soon be released. |
|
| Back to top |
|
|
l1quid_dark
n00b
Joined: 17 Nov 2004
Posts: 10
|
| Posted: Tue Mar 21, 2006 10:22 pm Post subject: |
|
|
| Thanks phsdv. Looks like I will have to wait then. I can't be bothered reverting to an older kernel. |
|
| Back to top |
|
|
phsdv
Guru
Joined: 13 Mar 2005
Posts: 372
Location: Europe
|
| Posted: Wed Mar 22, 2006 5:54 am Post subject: |
|
|
From the ivtv-devel mailing list:
| Hans Verkuil wrote: | I'm glad to announce that I've just released ivtv-0.6.0. This version is
specific for use with the 2.6.16 kernel. It will *not* work with older
kernels and it will *not* work with later kernels. In many way this is
an interim release: we want to get ivtv into the kernel, but many
things have to change in both the kernel and in ivtv before that is
possible. This version, together with the 2.6.16 kernel, represents
perhaps 30% of the work done. My guess is that when ivtv-0.7/2.6.17 is
released some 70% of the work is done. The goal is to get it into the
kernel by 2.6.18.
Those who are using older kernels can expect an ivtv-0.4.4 release next
weekend. That will be a bugfix release only.
Anyway, since www.ivtvdriver.org seems to be unreachable (mass FC5
downloads again from the atrpms.net?) I've made the source archive
available here: http://www.xs4all.nl/~hverkuil/ivtv-0.6.0.tar.gz.
Tomorrow or more likely Thursday I'll update www.ivtvdriver.org with the
proper links.
And finally the ChangeLog is appended below. Five new cards are
supported! Three of them come from the Japanese 'paken' branch that is
now merged into ivtv. A few more cards from that branch need a final
patch to saa7115 and will become available in 2.6.17. Many thanks for
the paken developers and T.Adachi in particular who did a great job
improving the new i2c-drivers. Three of them are also slated for
inclusion into the 2.6.17 kernel (saa717x needs too much work).
Enjoy!
Hans Verkuil
IVTV changes:
0.6 release:
- Add support for the Yuan MPC622 card.
- Add support for the Gotview PCI DVD2 Deluxe card.
- Add support for Nagase Transgear 5000TV
- Add support for AOpen VA2000MAX-STN6
- Add support for Yuan MPG600GR/Kuroutoshikou CX23416GYC-STVLP
- Added support for i2c devices saa717x, wm8739, upd64031a and upd64083.
- Added module options pal, ntsc and secam to be able to specify a
specific standard type (e.g. pal=m to select PAL-M or ntsc=j to select
NTSC_M_JP for Japan).
- tuner, tveeprom, cx25840, saa7115, saa7127, wm8775 and msp3400 are now
moved into the kernel and are no longer provided by ivtv.
- Firmware hotplug support is now REQUIRED.
- Inputs now start counting at 1 instead of 0. As per v4l standard.
- Add ivtv_pci_latency option to suppress setting PCI latency to 64.
Some motherboards can't handle that.
- Card definitions are much improved making it easier to add new cards.
- /dev/vbi devices are now vbi0, vbi8, vbi16 instead of vbi0, vbi4,
vbi8.
- Added ivtv-pcm-tester.c (PCM output level/sample.freq diagnostic tool)
- videodev.h/videodev2.h from the kernel is used. It's no longer
included in ivtv.
- Added ivtvctl GPIO options (read/set GPIO pins). Useful for
discovering GPIO settings of new cards.
- Removed ivtvctl --input-detect option (use --log-status instead).
- Add ivtvctl controls for bass, treble, loudness and balance.
- Improve detection of PVR250/PVR150 models.
- Allow ivtv-tune to be used as an external program in MythTV.
NOTE 2: The names of the inputs have changed to correspond with the
names as are used by the video4linux subsystem. This means that MythTV
users have to setup their inputs again. In particular 'Tuner 0' is now
'Tuner 1'.
This is the video4linux naming convention, so I expect no more changes.
|
|
|
| Back to top |
|
|
l1quid_dark
n00b
Joined: 17 Nov 2004
Posts: 10
|
| Posted: Thu Mar 23, 2006 3:55 pm Post subject: |
|
|
| Thanks so much phsdv. Now if only there were an ebuild for 0.6.0 ....... |
|
| Back to top |
|
|
phsdv
Guru
Joined: 13 Mar 2005
Posts: 372
Location: Europe
|
| Posted: Thu Mar 23, 2006 6:47 pm Post subject: |
|
|
| l1quid_dark wrote: | | Now if only there were an ebuild for 0.6.0 ....... |
just keep an eye on this bug (123575) |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Multimedia
