| View previous topic :: View next topic |
| Author |
Message |
hodoe
n00b
Joined: 18 Aug 2003
Posts: 23
|
 Posted: Sun Nov 21, 2004 1:00 pm Post subject: Avermedia 771 DVB-T wie gehts nun weiter ... |
 |
|
Hallo,
habe eine Avermedia 771 DVB-T Karte eingebaut. Dazu kernel 2.6.10-rc2 von kernel.org installiert.
Habe viele howtos gelesen und komme dennoch nicht weiter. Ich verstehe das mit dem patchen und den dvb-t-kernel-cvs-checkout nicht so ganz.... brauch ich die überhaupt? Ich habe zumindest bis auf den Kernel nichts weiter installiert.
Folgendes gebe ich ein:
Und hier die Ausgabe von dmesg:
| Code: | Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 11 for device 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:0a.0
PCI: Sharing IRQ 11 with 0000:00:0c.1
PCI: Sharing IRQ 11 with 0000:00:10.2
bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 11, latency: 32, mmio: 0xeb002000
bttv0: detected: AVermedia DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f0ff0f [init]
i2c_adapter i2c-0: registered as adapter #0
bttv0: using tuner=4
i2c-core: driver i2c TV tuner driver registered.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0060
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0061
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0062
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0063
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0064
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0065
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0066
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0067
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0068
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 0069
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006a
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006b
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006c
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006d
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006e
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: found normal i2c_range entry for adapter 0, addr 006f
i2c_adapter i2c-0: master_xfer: with 1 msgs.
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "remote0"
bttv0: add subdevice "dvb0" |
Und hier die Ausgabe von dmesg:
| Code: | i2c-core: driver dvbfe_mt352 registered.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
dvbfe_mt352: Setup for AverMedia DVB-T 771
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_adapter i2c-0: client [dvbfe_mt352] registered to adapter
registering 0-0000 |
Und hier die Ausgabe von dmesg:
| Code: | bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
PCI: Found IRQ 11 for device 0000:00:0c.1
PCI: Sharing IRQ 11 with 0000:00:0a.0
PCI: Sharing IRQ 11 with 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:10.2
bt878(0): Bt878 (rev 17) at 00:0c.1, irq: 11, latency: 32, memory: 0xeb003000
DVB: registering new adapter (bttv0). |
Wie geht es nun weiter? Wenn ich tvtime starte bekomme ich folgende Ausgabe:
| Code: | bash-2.05b$ tvtime
Running tvtime 0.9.12.
rtctimer: Cannot set periodic interval: Invalid argument
rtctimer: Cannot set periodic interval: Invalid argument
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/holger/.tvtime/tvtime.xml
videoinput: Cannot open capture device /dev/video0: Permission denied
Thank you for using tvtime.
bash-2.05b$ |
Grüße
hodoe |
|
| Back to top |
|
 |
Mickey_Maus
n00b
Joined: 04 Oct 2002
Posts: 15
Location: Tief im Westen
|
| Posted: Mon Nov 22, 2004 3:15 pm Post subject: |
|
|
Ich denke dass im neuen 2.6.10er Kernel alles enthalten ist.
Habe aber bei mir auch noch kein Bild gesehen 
Welche Module hast du eingebunden? |
|
| Back to top |
|
|
Anarcho
Advocate
Joined: 06 Jun 2004
Posts: 2970
Location: Germany
|
| Posted: Mon Nov 22, 2004 4:10 pm Post subject: |
|
|
| Quote: | | videoinput: Cannot open capture device /dev/video0: Permission denied |
gib dochmal ein und überprüfe die berechtigungen.
Es kann sein das du erst mitglied der gruppe video werden musst.
_________________
...it's only Rock'n'Roll, but I like it! |
|
| Back to top |
|
|
hodoe
n00b
Joined: 18 Aug 2003
Posts: 23
|
| Posted: Tue Nov 23, 2004 7:55 pm Post subject: |
|
|
Hallo!
| Code: | bash-2.05b$ ls -l /dev/video0
lrwxrwxrwx 1 root root 10 Nov 23 20:50 /dev/video0 -> v4l/video0
bash-2.05b$ |
Das Problem scheint udev zu sein ... bin aber noch nicht weiter.
Siehe mein Posting: https://forums.gentoo.org/viewtopic.php?t=255723
Gruß
hodoe |
|
| Back to top |
|
|
Gotti
n00b
Joined: 20 Oct 2004
Posts: 7
Location: Germany
|
| Posted: Thu Nov 25, 2004 4:46 pm Post subject: |
|
|
| hodoe wrote: | Hallo!
| Code: | bash-2.05b$ ls -l /dev/video0
lrwxrwxrwx 1 root root 10 Nov 23 20:50 /dev/video0 -> v4l/video0
bash-2.05b$ |
Das Problem scheint udev zu sein ... bin aber noch nicht weiter.
Siehe mein Posting: https://forums.gentoo.org/viewtopic.php?t=255723
Gruß
hodoe |
Also bei mir läuft sie ohne Probs unter Kernel 2.6.10-rc2
| Quote: | bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:02:09.0, irq: 21, latency: 64, mmio: 0xf7efe000
bttv0: detected: AVermedia DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=0091008f [init]
bttv0: using tuner=4
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "remote0"
bttv0: add subdevice "dvb0"
DVB: registering new adapter (bttv0). |
Ich habe die Kernel Sources von www.kernel.org genommen nicht die gepatchten von gentoo.
Mfg Gotti |
|
| Back to top |
|
|
hodoe
n00b
Joined: 18 Aug 2003
Posts: 23
|
| Posted: Thu Nov 25, 2004 8:03 pm Post subject: |
|
|
Hallo, habe auch die Original-Sourcen von kernel.org. Das Problem liegt auch nicht beim Kernel sondern bei udev. Ich habe mich endlich mal entschlossen das veraltete devfs rauszuschmeissen und dann sowas ...
Gruß
hodoe |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
