| View previous topic :: View next topic |
| Author |
Message |
samuel.penn
Tux's lil' helper
Joined: 14 Dec 2003
Posts: 114
Location: UK
|
 Posted: Sat Nov 27, 2004 10:01 am Post subject: USB storage problems with 2.6.9 |
 |
|
Due to hard drive playing up, I've reinstalled my Gentoo box from scratch. Before I did, I booted into my partially (no 3D) working 2.6 install and backed up everything to my Freecom external USB hardrive, since it only works under 2.6. This time around, I've gone fully for the 2.6.9 kernel, but the USB drive refuses to mount.
I've found lots of comments about problems with USB storage devices on 2.6.9, but I'm not having much luck. I've moved to udev, installed hotplug and coldplug, and tried playing around with installing and uninstalling various modules as others have suggested. If anyone has any idea of what I may have missed, help would be gratefully accepted.
I'm using the 2.6.9-gentoo-r6 kernel (was on r4, but upgraded since that didn't work). It works for other USB devices, but I don't even get a /dev/sda when the hard drive is plugged in, and 'fdisk -l' doesn't find anything accept IDE discs.
lspci:
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 02)
dmesg output is:
| Code: |
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[dfce6240] link (1fce61e2) element (1fce5040)
0: [dfce5040] link (1fce5080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=1df86860)
1: [dfce5080] link (1fce50c0) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=2, PID=69(IN) (buf=014e26a0)
2: [dfce50c0] link (1fce5100) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=0 Dev=2, PID=69(IN) (buf=014e26e0)
3: [dfce5100] link (1fce5140) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=2, PID=69(IN) (buf=014e2720)
4: [dfce5140] link (1fce5180) e3 SPD Active Length=0 MaxLen=3e DT0 EndPt=0 Dev=2, PID=69(IN) (buf=014e2760)
5: [dfce5180] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[dfce6270] link (1fce61e2) element (1fce51c0)
0: [dfce51c0] link (1fce5200) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=1df86860)
1: [dfce5200] link (1fce5240) e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=014e26a0)
2: [dfce5240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[dfce6240] link (1fce61e2) element (1fce5040)
0: [dfce5040] link (1fce5080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=1df86860)
1: [dfce5080] link (1fce50c0) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=2, PID=69(IN) (buf=014e26a0)
2: [dfce50c0] link (1fce5100) e3 SPD Active Length=0 MaxLen=3f DT0 EndPt=0 Dev=2, PID=69(IN) (buf=014e26e0)
3: [dfce5100] link (1fce5140) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=2, PID=69(IN) (buf=014e2720)
4: [dfce5140] link (1fce5180) e3 SPD Active Length=0 MaxLen=3e DT0 EndPt=0 Dev=2, PID=69(IN) (buf=014e2760)
5: [dfce5180] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000
[dfce6270] link (1fce61e2) element (1fce51c0)
0: [dfce51c0] link (1fce5200) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=1df86860)
1: [dfce5200] link (1fce5240) e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=014e26a0)
2: [dfce5240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
|
kernel config (without comments):
| Code: |
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_SHMEM=y
CONFIG_MODULES=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
CONFIG_X86_PC=y
CONFIG_MPENTIUMIII=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_PREEMPT=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PM=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
CONFIG_PCMCIA_PROBE=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
CONFIG_PNP=y
CONFIG_BLK_DEV_FD=y
CONFIG_LBD=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASKFILE_IO=y
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_SATA=y
CONFIG_SCSI_ATA_PIIX=y
CONFIG_SCSI_SATA_SX4=m
CONFIG_SCSI_SATA_SIS=m
CONFIG_SCSI_IPR=m
CONFIG_SCSI_QLA2XXX=y
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
CONFIG_IEEE1394_RAWIO=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_NETFILTER=y
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_OWNER=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_CLASSIFY=y
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
CONFIG_NET_PCI=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_S2IO=m
CONFIG_PPP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_INOTIFY=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_INTEL_MCH=m
CONFIG_AGP_NVIDIA=y
CONFIG_DRM=y
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_SPEAKUP_DEFAULT="none"
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
CONFIG_SND_INTEL8X0=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_BLUETOOTH_TTY=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_RW_DETECT=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_DEBUG=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ADFS_FS=m
CONFIG_NFS_FS=y
CONFIG_NFSD=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_CODA_FS=m
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_EARLY_PRINTK=y
CONFIG_4KSTACKS=y
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
|
|
|
| Back to top |
|
 |
genstef
Retired Dev
Joined: 13 Jun 2004
Posts: 668
Location: M/Bay/Germany
|
| Posted: Sat Nov 27, 2004 10:14 am Post subject: |
|
|
| You could try sys-kernel/development-sources, as it is a newer kernel and will hopefully address many problems you see. |
|
| Back to top |
|
|
samuel.penn
Tux's lil' helper
Joined: 14 Dec 2003
Posts: 114
Location: UK
|
| Posted: Sat Nov 27, 2004 10:27 am Post subject: sys-kernel/development-sources |
|
|
| Is it newer? It is still 2.6.9, same as gentoo-dev-sources, plus doesn't have any patches. |
|
| Back to top |
|
|
genstef
Retired Dev
Joined: 13 Jun 2004
Posts: 668
Location: M/Bay/Germany
|
| Posted: Sat Nov 27, 2004 11:14 am Post subject: |
|
|
ACCEPT_KEYWORDS=~x86 emerge -va development-sources
YOu could also try
ACCEPT_KEYWORDS=~x86 emerge -va mm-sources
mm-sources is the latest development tree development sources is the latest stable tree. Problems should be fixed in development sources. |
|
| Back to top |
|
|
samuel.penn
Tux's lil' helper
Joined: 14 Dec 2003
Posts: 114
Location: UK
|
| Posted: Sat Nov 27, 2004 5:21 pm Post subject: 2.6.10 solves the problem |
|
|
| genstef wrote: | ACCEPT_KEYWORDS=~x86 emerge -va development-sources
|
Didn't think to look in unstable. 2.6.10 fixes the problems using the same config settings as I was using in 2.6.9 (which didn't work), so I'm going to stick with 2.6.10, even if it is marked as unstable.
Thanks for that. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
