| View previous topic :: View next topic |
| Author |
Message |
Wart
n00b
Joined: 03 Jun 2004
Posts: 66
|
 Posted: Mon Nov 29, 2004 2:46 am Post subject: [Resolved]Fluxbox Freezes - i810 Problem |
 |
|
Trying to finish up a fresh install..
I emerged fluxbox, and fired it up.. Problem is, it freezes after using it for a few seconds.. If I let it just sit and do nothing, it seems fine, but a few seconds after I open xterm and start typing, it freezes, the screen goes black, I cant move my mouse and the keyboard quits responding.. I have to hard power off the system and turn it back on again..
Any ideas?
Last edited by Wart on Sun Dec 05, 2004 7:49 am; edited 3 times in total |
|
| Back to top |
|
 |
SerfurJ
l33t
Joined: 10 Apr 2004
Posts: 824
Location: Texas
|
| Posted: Mon Nov 29, 2004 3:31 am Post subject: |
|
|
| can you give more details? ssh to the system from another computer, if available, to see what's going on. |
|
| Back to top |
|
|
robet
l33t
Joined: 06 Sep 2004
Posts: 807
Location: Earth/NorthAmerica/USA/NY
|
|
| Back to top |
|
|
Wart
n00b
Joined: 03 Jun 2004
Posts: 66
|
| Posted: Mon Nov 29, 2004 8:47 am Post subject: |
|
|
Here's the log file..
| Code: |
X Window System Version 6.8.0
Release Date: 8 September 2004
X Protocol Version 11, Revision 0, Release 6.8
Build Operating System: Linux 2.6.9-gentoo-r6 i686 [ELF]
Current Operating System: Linux d-ip-129-15-139-254.couch.ou.edu 2.6.9-gentoo-r6 #1 Sun Nov 28 16:59:14 CET 2004 i686
Build Date: 28 November 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 29 01:46:30 2004
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "SafeT"
(**) | |-->Device "dallycard"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/,/usr/share/fonts/local/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000f8e4, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7124 card 109f,7148 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7125 card 109f,7148 rev 03 class 03,00,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2415 card 109f,7148 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:06:0: chip 10ec,8139 card 109f,7148 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:0b:0: chip 11c1,044e card 1235,044e rev 02 class 07,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf4100000 - 0xf41fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:1:0) Intel Corp. 82810E DC-133 CGC [Chipset Graphics Controller] rev 3, Mem @ 0xf8000000/26, 0xf4000000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xf4100000 - 0xf41000ff (0x100) MX[B]
[1] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[2] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[3] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[4] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[5] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[6] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[7] -1 0 0x000010a0 - 0x000010bf (0x20) IX[B]
[8] -1 0 0x00001080 - 0x0000108f (0x10) IX[B]
(II) Inactive PCI resource ranges:
[0] -1 0 0xf4100400 - 0xf41004ff (0x100) MX[B]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[2] -1 0 0x00002800 - 0x00002807 (0x8) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf4100000 - 0xf41000ff (0x100) MX[B]
[1] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[2] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[3] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[4] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[5] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[6] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[7] -1 0 0x000010a0 - 0x000010bf (0x20) IX[B]
[8] -1 0 0x00001080 - 0x0000108f (0x10) IX[B]
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xf4100400 - 0xf41004ff (0x100) MX[B]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[2] -1 0 0x00002800 - 0x00002807 (0x8) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf4100000 - 0xf41000ff (0x100) MX[B]
[6] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[8] -1 0 0xf4100400 - 0xf41004ff (0x100) MX[B]
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[12] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[13] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[14] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[15] -1 0 0x000010a0 - 0x000010bf (0x20) IX[B]
[16] -1 0 0x00001080 - 0x0000108f (0x10) IX[B]
[17] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[18] -1 0 0x00002800 - 0x00002807 (0x8) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "i810"
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G
(II) Primary Device is: PCI 00:01:0
(--) Assigning device section with no busID to primary device
(--) Chipset i810e found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf4100000 - 0xf41000ff (0x100) MX[B]
[6] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[8] -1 0 0xf4100400 - 0xf41004ff (0x100) MX[B]
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[12] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[13] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[14] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[15] -1 0 0x000010a0 - 0x000010bf (0x20) IX[B]
[16] -1 0 0x00001080 - 0x0000108f (0x10) IX[B]
[17] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[18] -1 0 0x00002800 - 0x00002807 (0x8) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf4100000 - 0xf41000ff (0x100) MX[B]
[6] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[8] -1 0 0xf4100400 - 0xf41004ff (0x100) MX[B]
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[15] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[16] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[17] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[18] -1 0 0x000010a0 - 0x000010bf (0x20) IX[B]
[19] -1 0 0x00001080 - 0x0000108f (0x10) IX[B]
[20] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[21] -1 0 0x00002800 - 0x00002807 (0x8) IX[B]
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) I810(0): Depth 16, (--) framebuffer bpp 16
(==) I810(0): RGB weight 565
(==) I810(0): Default visual is TrueColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 1024 kB
(II) I810(0): VESA VBE OEM: Intel(R) 810, Intel(R) 815 Chipset Video BIOS
(II) I810(0): VESA VBE OEM Software Rev: 36.56
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(R) 810, Intel(R) 815 Chipset
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level none
(II) I810(0): VESA VBE DDC transfer in appr. 0 sec.
(II) I810(0): VESA VBE DDC read failed
(--) I810(0): Chipset: "i810e"
(--) I810(0): Linear framebuffer at 0xF8000000
(--) I810(0): IO registers at addr 0xF4000000
(II) I810(0): I810CheckAvailableMemory: 91064k available
(==) I810(0): Will alloc AGP framebuffer: 8192 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): SafeT: Using hsync range of 31.50-48.50 kHz
(II) I810(0): SafeT: Using vrefresh range of 50.00-100.00 Hz
(II) I810(0): Clock range: 9.50 to 163.00 MHz
(II) I810(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (hsync out of range)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (unknown reason)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (hsync out of range)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (hsync out of range)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (hsync out of range)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1152x864" (hsync out of range)
(II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x960" (hsync out of range)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x960" (hsync out of range)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (hsync out of range)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "832x624" (hsync out of range)
(II) I810(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (hsync out of range)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (hsync out of range)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1024" (hsync out of range)
(II) I810(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1152x768" (width too large for virtual size)
(--) I810(0): Virtual size is 1024x768 (pitch 1024)
(**) I810(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) I810(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) I810(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) I810(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) I810(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) I810(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) I810(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) I810(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) I810(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) I810(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) I810(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) I810(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) I810(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) I810(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) I810(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) I810(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) I810(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) I810(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) I810(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) I810(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) I810(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) I810(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) I810(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) I810(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(==) I810(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(**) I810(0): page flipping disabled
(II) I810(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf4000000 - 0xf407ffff (0x80000) MS[B]
[1] 0 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xf4100000 - 0xf41000ff (0x100) MX[B]
[8] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[9] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[10] -1 0 0xf4100400 - 0xf41004ff (0x100) MX[B]
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[17] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[18] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[19] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
[20] -1 0 0x000010a0 - 0x000010bf (0x20) IX[B]
[21] -1 0 0x00001080 - 0x0000108f (0x10) IX[B]
[22] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[23] -1 0 0x00002800 - 0x00002807 (0x8) IX[B]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) I810(0): Write-combining range (0xf8000000,0x4000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): Setting dot clock to 65.0 MHz [ 0x3f 0xa 0x30 ] [ 65 12 3 ]
(II) I810(0): chose watermark 0x2210e000: (tab.freq 65.0)
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x00000000 (pgoffset 0)
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1024 pages failed
(Cannot allocate memory)
(II) I810(0): No physical memory available for 4194304 bytes of DCACHE
(II) I810(0): xf86BindGARTMemory: bind key 3 at 0x00800000 (pgoffset 2048)
(II) I810(0): Allocated of 4096 bytes for HW cursor
(II) I810(0): xf86BindGARTMemory: bind key 4 at 0x00801000 (pgoffset 2049)
(II) I810(0): Allocated of 16384 bytes for ARGB HW cursor
(II) I810(0): Adding 768 scanlines for pixmap caching
(II) I810(0): Allocated Scratch Memory
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
24 128x128 slots
6 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(==) I810(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(**) Mouse1: SmartScroll: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/local/, removing from list!
Error in I810WaitLpRing(), now is 39199, start is 37198
pgetbl_ctl: 0x7d70001 pgetbl_err: 0x0
ipeir: 0 iphdr: 857c9210
LP ring tail: 158 head: 100b0 len: 10f001 start 300000
eir: 0 esr: 1 emr: 3d
instdone: ff7a instpm: 0
memmode: 5 instps: 810
hwstam: 9ac7 ier: 0 imr: 9ac7 iir: 0
space: 65360 wanted 65528
Fatal server error:
lockup
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
FatalError re-entered, aborting
Caught signal 11. Server aborting
|
|
|
| Back to top |
|
|
SerfurJ
l33t
Joined: 10 Apr 2004
Posts: 824
Location: Texas
|
| Posted: Mon Nov 29, 2004 2:07 pm Post subject: |
|
|
| what version of fluxbox are you using? |
|
| Back to top |
|
|
Wart
n00b
Joined: 03 Jun 2004
Posts: 66
|
| Posted: Mon Nov 29, 2004 8:10 pm Post subject: |
|
|
Had the problem with the 'stable' and the '~x86' versions.. I think the problem isn't with fluxbox but with xorg-x11.. If I just start it, then I still freeze... I get about 10 seconds of usability and then it dies 
Want my xorg config? |
|
| Back to top |
|
|
SerfurJ
l33t
Joined: 10 Apr 2004
Posts: 824
Location: Texas
|
| Posted: Mon Nov 29, 2004 8:26 pm Post subject: |
|
|
it could be fluxbox. although i've never had issues with fluxbox, openbox made X freeze. i'm using xorg-x11-6.8.0-r3 and fluxbox-0.9.10-r3 without problems.
sure, post your xorg.conf. what video card are you using? |
|
| Back to top |
|
|
Wart
n00b
Joined: 03 Jun 2004
Posts: 66
|
| Posted: Mon Nov 29, 2004 8:46 pm Post subject: |
|
|
It's an onboard intel card.. 82810e .. The box is an hp pavilion 502n .. Only things I could find listed it as having 11 megs of video ram.. Thought that was odd, so I tried a couple different numbers in the config..
Xorg Config..
| Code: | # File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
# FontPath "/usr/share/fonts/Speedo/"
# FontPath "/usr/share/fonts/TrueType/"
# FontPath "/usr/share/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "SafeT"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 48.5
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-100
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "dallycard"
Driver "i810"
#VideoRam 8192
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "dallycard"
Monitor "SafeT"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
|
|
|
| Back to top |
|
|
SerfurJ
l33t
Joined: 10 Apr 2004
Posts: 824
Location: Texas
|
| Posted: Mon Nov 29, 2004 9:25 pm Post subject: |
|
|
that's hard to look at. could you post the output of:
| Code: | | cat /etc/X11/xorg.conf|egrep -v ^# |
|
|
| Back to top |
|
|
Wart
n00b
Joined: 03 Jun 2004
Posts: 66
|
| Posted: Mon Nov 29, 2004 9:42 pm Post subject: |
|
|
| Code: |
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
EndSection
Section "ServerFlags"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "SafeT"
HorizSync 31.5 - 48.5
VertRefresh 50-100
EndSection
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSection
Section "Device"
Identifier "dallycard"
Driver "i810"
#VideoRam 8192
# Insert Clocks lines here if appropriate
EndSection
Section "Screen"
Identifier "Screen 1"
Device "dallycard"
Monitor "SafeT"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
|
|
|
| Back to top |
|
|
SerfurJ
l33t
Joined: 10 Apr 2004
Posts: 824
Location: Texas
|
| Posted: Mon Nov 29, 2004 10:40 pm Post subject: |
|
|
i overlooked this earlier.
| Code: | | space: 65360 wanted 65528 |
it looks like you ran out of memory. |
|
| Back to top |
|
|
Wart
n00b
Joined: 03 Jun 2004
Posts: 66
|
| Posted: Mon Nov 29, 2004 10:56 pm Post subject: |
|
|
...
So how do I fix it? Do I really need more than 11 megs of video ram or 128 megs of system ram to run flux?
Edit:
I've booted flux on a pentium 166 w/ a voodoo 3 before.. It had a lot less resources available to it.. |
|
| Back to top |
|
|
SerfurJ
l33t
Joined: 10 Apr 2004
Posts: 824
Location: Texas
|
| Posted: Tue Nov 30, 2004 1:46 am Post subject: |
|
|
| is your swap set up? are you sure you didn't specify the video ram in your xorg.conf? |
|
| Back to top |
|
|
Wart
n00b
Joined: 03 Jun 2004
Posts: 66
|
| Posted: Tue Nov 30, 2004 1:54 am Post subject: |
|
|
| Followed the handbook for setting up partitions and stuff..is there a quick way to check that the swap is setup ? |
|
| Back to top |
|
|
SerfurJ
l33t
Joined: 10 Apr 2004
Posts: 824
Location: Texas
|
| Posted: Tue Nov 30, 2004 2:08 am Post subject: |
|
|
|
|
| Back to top |
|
|
Wart
n00b
Joined: 03 Jun 2004
Posts: 66
|
| Posted: Wed Dec 01, 2004 1:58 am Post subject: |
|
|
| that spits out a buncha stuff.. Looks like swap is working fine.. |
|
| Back to top |
|
|
SerfurJ
l33t
Joined: 10 Apr 2004
Posts: 824
Location: Texas
|
| Posted: Wed Dec 01, 2004 2:21 am Post subject: |
|
|
it must not be ram then. i'm out of ideas. maybe try to start over on your xorg.conf based on mine:
| Code: | $ cat /etc/X11/xorg.conf|grep [:alphanum]|egrep -v ^#
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "speedo"
Load "glx"
Load "freetype"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/share/fonts/ttf-bitstream-vera/"
FontPath "/usr/share/fonts/terminus/"
FontPath "/usr/share/fonts/corefonts/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/freefont/"
FontPath "/usr/share/fonts/artwiz/"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/Speedo/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/encodings/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/util/"
FontPath "/usr/share/fonts/sharefont/"
FontPath "/usr/share/fonts/lfp-fix/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/unifont/"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Option "AutoRepeat" "500 30"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
Identifier "My Monitor"
HorizSync 30-86
VertRefresh 50-160
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Videocard vendor"
BoardName "ASUS NVIDIA GeForce FX"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "Videocard0"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 24
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "BlankTime" "5"
Option "StandbyTime" "10"
Option "SuspendTime" "20"
Option "OffTime" "30"
EndSection
|
|
|
| Back to top |
|
|
Wart
n00b
Joined: 03 Jun 2004
Posts: 66
|
| Posted: Thu Dec 02, 2004 10:20 pm Post subject: |
|
|
Okay.. Here are the things I've noticed..
Thinks work fine logged in as root.. if I startx as root, nothing at all breaks.. things seem to work flawlessly..
If I log in as a user.. The problem occurs.. X works for less than a minute of usuable time..
Searched google some more and stuff.. Discovered it's probably a problem with my video card.. the 810 drive isn't just great so it seems..
What I've done for the moment is disable 1024x768 resolution and added to my xorg.conf file.. This seems to have resolved the issue for me..
I've got to do some more testing to figure out exactly which xorg options break a user running it..
Any insight as to why things work fine as root without changing the config file but not as a user? I tried copying all my .<blah> files from /root to /home/<user> .. No go there..
How do you check was color depth your x-server is running at? It could be that I only have this problem at 24 bit.. but not sure how to check what I'm running at.. :-/ |
|
| Back to top |
|
|
SerfurJ
l33t
Joined: 10 Apr 2004
Posts: 824
Location: Texas
|
| Posted: Thu Dec 02, 2004 10:30 pm Post subject: |
|
|
| Wart wrote: |
How do you check was color depth your x-server is running at? It could be that I only have this problem at 24 bit.. but not sure how to check what I'm running at.. :-/ |
looking at the config file is the only way i know. your DefaultDepth is 16.
when things run as root but not as a user, it usually makes me think the permissions are wrong. in this case, i'm not sure how that could be. |
|
| Back to top |
|
|
Wart
n00b
Joined: 03 Jun 2004
Posts: 66
|
| Posted: Fri Dec 03, 2004 6:32 am Post subject: |
|
|
Yeah I found that..
Things work fine when the depth is set to 24 bit.. Total weirdness.. I guess that's the solution.. Blah..
Here's my unrelated question..
I mount hda5 and hda6.. at /mnt/media and /mnt/files .. How do I give a user account access to them instead of just root? |
|
| Back to top |
|
|
SerfurJ
l33t
Joined: 10 Apr 2004
Posts: 824
Location: Texas
|
| Posted: Fri Dec 03, 2004 1:07 pm Post subject: |
|
|
add user to the mount options. for example:
| Code: | /dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,user,ro 0 0
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
