| View previous topic :: View next topic |
| Author |
Message |
rev138
l33t
Joined: 19 Jun 2003
Posts: 848
Location: Vermont, USA
|
 Posted: Mon Dec 13, 2004 4:24 pm Post subject: K3b burns successfully, but CD won't play. [SOLVED] |
 |
|
I am trying to burn some mp3s to an audio CD using K3b. The process seems to go fine, but when I try to play the CD, I get the following error:
| Code: |
/dev/cdroms/cdrom0: Input/output error
mount: block device /dev/cdroms/cdrom0 is write-protected, mounting read-only
/dev/cdroms/cdrom0: Input/output error
mount: /dev/cdroms/cdrom0: can't read superblock
Please check that the disk is entered correctly.
|
If I load the disc in windows, it reads it as an audio CD, and I can see the various Track*.cda files, but they are each exactly 44 bytes, and (of course) won't play.
Here's K3b's debug output for the burning session:
| Code: |
System
-----------------------
K3b Version:0.11.17
KDE Version: 3.3.1
QT Version: 3.3.3
cdrecord
-----------------------
/usr/bin/cdrecord: Warning: Running on Linux-2.6.9-gentoo-r4
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
/usr/bin/cdrecord: Warning: Linux-2.6.8 introduced incompatible interface changes.
/usr/bin/cdrecord: Warning: SCSI transport does no longer work for suid root programs.
/usr/bin/cdrecord: Warning: if cdrecord fails, try to run it from a root account.
/usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/ide/host0/bus1/target1/lun0/cd'
devname: '/dev/ide/host0/bus1/target1/lun0/cd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.8'.
Driveropts: 'burnproof'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'CyberDrv'
Identifikation : 'CW038D CD-R/RW '
Revision : '110C'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1806336 = 1764 KB
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
pregap1: -1
Track 01: audio 30 MB (03:04.14) no preemp swab copy
Total size: 30 MB (03:04.14) = 13811 sectors
Lout start: 31 MB (03:06/11) = 13811 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 346035
Starting to write CD/DVD at speed 16 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 30 MB written.
Track 01: 1 of 30 MB written (fifo 82%) [buf 72%] 10.3x.
Track 01: 2 of 30 MB written (fifo 64%) [buf 57%] 10.0x.
Track 01: 3 of 30 MB written (fifo 43%) [buf 47%] 10.7x.
Track 01: 4 of 30 MB written (fifo 17%) [buf 44%] 11.7x.
Track 01: 5 of 30 MB written (fifo 3%) [buf 24%] 9.3x.
Track 01: 6 of 30 MB written (fifo 3%) [buf 58%] 7.5x.
Track 01: 7 of 30 MB written (fifo 60%) [buf 95%] 4.4x.
Track 01: 8 of 30 MB written (fifo 35%) [buf 90%] 11.3x.
Track 01: 9 of 30 MB written (fifo 10%) [buf 87%] 12.1x.
Track 01: 10 of 30 MB written (fifo 3%) [buf 55%] 8.0x.
Track 01: 11 of 30 MB written (fifo 6%) [buf 16%] 7.5x.
Track 01: 12 of 30 MB written (fifo 7%) [buf 48%] 7.4x.
Track 01: 13 of 30 MB written (fifo 68%) [buf 94%] 4.4x.
Track 01: 14 of 30 MB written (fifo 43%) [buf 93%] 11.9x.
Track 01: 15 of 30 MB written (fifo 18%) [buf 88%] 11.5x.
Track 01: 16 of 30 MB written (fifo 6%) [buf 57%] 8.1x.
Track 01: 17 of 30 MB written (fifo 7%) [buf 20%] 7.6x.
Track 01: 18 of 30 MB written (fifo 7%) [buf 37%] 7.5x.
Track 01: 19 of 30 MB written (fifo 1%) [buf 94%] 8.4x.
Track 01: 20 of 30 MB written (fifo 39%) [buf 95%] 5.4x.
Track 01: 21 of 30 MB written (fifo 14%) [buf 95%] 12.5x.
Track 01: 22 of 30 MB written (fifo 3%) [buf 66%] 8.2x.
Track 01: 23 of 30 MB written (fifo 1%) [buf 28%] 7.5x.
Track 01: 24 of 30 MB written (fifo 1%) [buf 34%] 7.5x.
Track 01: 25 of 30 MB written (fifo 6%) [buf 90%] 7.5x.
Track 01: 26 of 30 MB written (fifo 40%) [buf 95%] 5.4x.
Track 01: 27 of 30 MB written (fifo 15%) [buf 95%] 12.5x.
Track 01: 28 of 30 MB written (fifo 3%) [buf 67%] 8.2x.
Track 01: 29 of 30 MB written (fifo 1%) [buf 30%] 7.5x.
Track 01: 30 of 30 MB written (fifo 4%) [buf 34%] 7.5x.
Track 01: Total bytes read/written: 32483472/32483472 (13811 sectors).
Writing time: 38.519s
Average write speed 5.0x.
Min drive buffer fill was 16%
Fixating...
Fixating time: 11.713s
/usr/bin/cdrecord: fifo had 512 puts and 512 gets.
/usr/bin/cdrecord: fifo was 63 times empty and 1 times full, min fill was 0%.
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/ide/host0/bus1/target1/lun0/cd speed=16 -dao driveropts=burnfree -eject driveropts=burnproof -useinfo -pad -shorttrack -audio /tmp/kde-rev138/k3b_audio_0_01.inf
|
Advice?
Thnx in advance.
Last edited by rev138 on Mon Dec 13, 2004 8:19 pm; edited 1 time in total |
|
| Back to top |
|
 |
rev138
l33t
Joined: 19 Jun 2003
Posts: 848
Location: Vermont, USA
|
| Posted: Mon Dec 13, 2004 5:05 pm Post subject: |
|
|
Here's an interesting development: While the CDs won't play in linux OR windows, they work fine in my portable CD player.
WTF? |
|
| Back to top |
|
|
noergeli
Apprentice
Joined: 05 Oct 2004
Posts: 205
Location: Hamburg, Gemany
|
| Posted: Mon Dec 13, 2004 7:13 pm Post subject: |
|
|
How do you try to access the CDs? | Code: | /dev/cdroms/cdrom0: Input/output error
mount: block device /dev/cdroms/cdrom0 is write-protected, mounting read-only
/dev/cdroms/cdrom0: Input/output error
mount: /dev/cdroms/cdrom0: can't read superblock
Please check that the disk is entered correctly. |
That's a correct message if you try to mount the discs for viewing them in a filebrowser, because audio-cds are not mountable. Have you tried playing them in a cd-player application? If your using kde, do they appear in konquerors audio-cd browser (audiocd:/)?
In Windows: How does Windows-mediaplayer behave? |
|
| Back to top |
|
|
rev138
l33t
Joined: 19 Jun 2003
Posts: 848
Location: Vermont, USA
|
| Posted: Mon Dec 13, 2004 7:45 pm Post subject: |
|
|
| Winamp/KsCD seem to recognize the tracks and try to play them, but I get nothing but silence. Works fine in my Discman. |
|
| Back to top |
|
|
noergeli
Apprentice
Joined: 05 Oct 2004
Posts: 205
Location: Hamburg, Gemany
|
| Posted: Mon Dec 13, 2004 8:10 pm Post subject: |
|
|
So your discs seem to be ok. Do other CDs work? I don't know how winamp handles audio-cds, but i know kscd is doing it the analog way.
Is it possible you're missing an audio-cable from your drive to your soundcard? If not check your mixer settings to see if your cd-channel is unmuted. You could also try a player that does digital extraction. I'm not quite sure, but i think xine does this.
Another possibility is to browse the CD with konqueror by Typing "audiocd:/" (without "") in the adressbar. Then you should be able to play the files in the (virtual) wav directory in any mediaplayer. |
|
| Back to top |
|
|
rev138
l33t
Joined: 19 Jun 2003
Posts: 848
Location: Vermont, USA
|
| Posted: Mon Dec 13, 2004 8:18 pm Post subject: K3b burns successfully, but CD won't play [SOLVED] |
|
|
Yup. Looks like I was being a dumbass.
I swapped the CD drives between my Linux and Windows boxes last week and I forgot to hook up the audio cables.
Thanks for the help. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Multimedia
