View previous topic :: View next topic |
Author |
Message |
Wave2184 Apprentice
Joined: 02 Nov 2003 Posts: 189 Location: Roma
|
Posted: Tue Dec 14, 2004 4:47 pm Post subject: bootsplash, gensplash, fbsplash????....idee confuse |
|
|
ciao a tutti..
è da ieri che sto smanettando sulla mia gentoo per mettere su il bootsplash....
ho seguito questa guida http://www.gentoo.it/tips/FramebufferAndBoot.html
ma il risultato non è positivo...ho il framebuffer a 800x600 e senza immagine....
ho sentito dire che per kernel >= 2.6.7 bisogna usare fbsplash o gensplash...ma dalla guida sembrerebbe che anche bootsplash sia valido...qualcuno mi potrebbe dare qualche spiegazione in più???ho le idee un po confuse...(ho appena fatto un esame )
il mio kernel è:
2.6.7-gentoo-r11 e questo è il mio lilo.conf:
Code: | # $Header: /var/cvsroot/gentoo-x86/sys-boot/lilo/files/lilo.conf,v 1.2 2004/07/18 04:42:04 dragonheart Exp $
# Author: Ultanium
#
# Start LILO global section
#
# Faster, but won't work on all systems:
#compact
# Should work for most systems, and do not have the sector limit:
lba32
# If lba32 do not work, use linear:
#linear
# MBR to install LILO to:
boot = /dev/hda
#map = /boot/.map
# If you are having problems booting from a hardware raid-array
# or have a unusual setup, try this:
#disk=/dev/ataraid/disc0/disc bios=0x80 # see this as the first BIOS disk
#disk=/dev/sda bios=0x81 # see this as the second BIOS disk
#disk=/dev/hda bios=0x82 # see this as the third BIOS disk
# Here you can select the secondary loader to install. A few
# examples is:
#
# boot-text.b
# boot-menu.b
# boot-bmp.b
#
#install = /boot/boot-menu.b # Note that for lilo-22.5.5 or later you
# do not need boot-{text,menu,bmp}.b in
# /boot, as they are linked into the lilo
# binary.
install = /boot/boot-bmp.b
bitmap=/boot/handy_128.bmp
bmp-colors=38,68,53,112,38,25 # colore del testo
bmp-table=114p,347p,2,7 # posizione e colore del testo
bmp-timer=470p,336p,25,0,11 # posizione e colore del timer
#menu-scheme=Wb
prompt
# If you always want to see the prompt with a 15 second timeout:
timeout=150
delay = 150
# Normal VGA console
#vga = normal
# VESA console with size 1024x768x16:
#vga = 791
default = Gentoo
#
# End LILO global section
#
#
# Linux bootable partition config begins
#
image = /boot/kernel-2.6.7-gentoo
root = /dev/hda4
#root = /devices/discs/disc0/part3
label = Gentoo
read-only # read-only for checking
append="video=vesa:ywrap,mtrr,1024x768-32@60"
initrd=/boot/initrd-1024x768
#
# Linux bootable partition config ends
#
#
# DOS bootable partition config begins
#
other = /dev/hda1
#other = /devices/discs/disc0/part1
label = WindowsXP
table = /dev/hda
#
# DOS bootable partition config ends
#
|
grazie.... _________________ LINUX:sbav:
Powered by Gentoo 2004.2
Powered by Ubuntu 5.10 |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30996 Location: here
|
Posted: Tue Dec 14, 2004 4:50 pm Post subject: |
|
|
Mi pare che il 2.6.7 abbai gia' fbsplash e non piu' bootsplash. Quindi leggi questo https://forums.gentoo.org/viewtopic.php?t=206778 .
Per verificare che sia fbsplash devi avere questa voce nel kernel
Code: | Device Drivers ---> Graphics support --->
[*] Support for the framebuffer splash |
_________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
Wave2184 Apprentice
Joined: 02 Nov 2003 Posts: 189 Location: Roma
|
Posted: Tue Dec 14, 2004 5:11 pm Post subject: |
|
|
fedeliallalinea wrote: |
Per verificare che sia fbsplash devi avere questa voce nel kernel
Code: | Device Drivers ---> Graphics support --->
[*] Support for the framebuffer splash |
|
quella voce nn la trovo nel 2.6.7 ma neanche nel config del kernel 2.6.9..... _________________ LINUX:sbav:
Powered by Gentoo 2004.2
Powered by Ubuntu 5.10 |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30996 Location: here
|
Posted: Tue Dec 14, 2004 5:15 pm Post subject: |
|
|
Prova un
Code: | # cat /usr/src/linux/.config | grep SPLASH |
_________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
Wave2184 Apprentice
Joined: 02 Nov 2003 Posts: 189 Location: Roma
|
Posted: Tue Dec 14, 2004 5:23 pm Post subject: |
|
|
fedeliallalinea wrote: | Prova un
Code: | # cat /usr/src/linux/.config | grep SPLASH |
|
CONFIG_BOOTSPLASH=y
questo è l'output....
cmq sia penso che ne approfitterò per mettere su il kernel 2.6.9 e a questo punto meto direttamente fbsplash...solo che mi interessava capire come si è evoluto il tutto da bootspalsh a fbsplash (presumo che gensplash includa fbsplash)....sapere se è specifico per gentoo etc... _________________ LINUX:sbav:
Powered by Gentoo 2004.2
Powered by Ubuntu 5.10 |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30996 Location: here
|
Posted: Tue Dec 14, 2004 5:36 pm Post subject: |
|
|
Ok allora il tuo kernel ha il supporto per bootsplash. Si fbsplash e' la stessa cosa di gensplash (credo chiamata cosi' per il tema ma sinceramente non ho mai capito bene neanche io) _________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
neon l33t
Joined: 04 Aug 2003 Posts: 759 Location: Catania, Italy, Europe
|
Posted: Tue Dec 14, 2004 6:45 pm Post subject: |
|
|
Gensplash è il progetto avviato da spook per sostituire bootsplash. Questo progetto è (per ora) composto da fbsplash (patch del kernel) e le splashutils (programmini per la gestione dello splash).
L'intenzione del progetto è quella di riorganizzare quello che viene fatto in bootsplash in una maniera migliore, in futuro ci saranno file di config in xml per i temi ed altri miglioramenti grafici. La nuova implementazione è in fase di sviluppo, sul sito http://dev.gentoo.org/~spock/projects/gensplash/ trovate tutte le info necessarie _________________ Io credo che le tecnologie siano moralmente neutrali fino a quando non le utilizziamo - William Gibson
LINEE GUIDA DEL FORUM |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30996 Location: here
|
Posted: Tue Dec 14, 2004 6:48 pm Post subject: |
|
|
@neon_it: grazie mille ora mi e' chiaro _________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
Wave2184 Apprentice
Joined: 02 Nov 2003 Posts: 189 Location: Roma
|
Posted: Tue Dec 14, 2004 9:33 pm Post subject: |
|
|
ma che frame buffer device devo utilizzare????vesafb o vesafb-tng???
quale è la differenza???ho sentito gente che con il tng ha avuto problemi...ma potrebbero essere solo dei casi isolati... _________________ LINUX:sbav:
Powered by Gentoo 2004.2
Powered by Ubuntu 5.10 |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30996 Location: here
|
Posted: Tue Dec 14, 2004 9:39 pm Post subject: |
|
|
Wave2184 wrote: | ma che frame buffer device devo utilizzare????vesafb o vesafb-tng??
|
vesa-tng dovrebbe funzionare meglio e' nuovo. l'ha fatto lo stesso di fbsplash _________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
neon l33t
Joined: 04 Aug 2003 Posts: 759 Location: Catania, Italy, Europe
|
Posted: Tue Dec 14, 2004 9:53 pm Post subject: |
|
|
fedeliallalinea wrote: | Wave2184 wrote: | ma che frame buffer device devo utilizzare????vesafb o vesafb-tng??
|
vesa-tng dovrebbe funzionare meglio e' nuovo. l'ha fatto lo stesso di fbsplash |
E' sicuramente più comodo, a patto di accettare un rallentamento nello switch tra console dovuto ad un piccolo baco.
https://forums.gentoo.org/viewtopic.php?t=250913 _________________ Io credo che le tecnologie siano moralmente neutrali fino a quando non le utilizziamo - William Gibson
LINEE GUIDA DEL FORUM |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30996 Location: here
|
Posted: Tue Dec 14, 2004 9:54 pm Post subject: |
|
|
A me non lo da piu' questo problema _________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
gaffiere Guru
Joined: 13 Nov 2003 Posts: 406 Location: Provincia Milano
|
Posted: Tue Dec 14, 2004 9:56 pm Post subject: |
|
|
ah... che kernel utilizzi?
see ya _________________ Thomaz "Gaffiere"
Middle-Earth XP2200+, 1Gb Ram, 80Gb + 160Gb Hd, SbLive!, Nvidia 6800GT AGP8x
Gentoo Gnu/Linux 2.6.12-gentoo-r10 |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30996 Location: here
|
Posted: Tue Dec 14, 2004 10:01 pm Post subject: |
|
|
gaffiere wrote: | ah... che kernel utilizzi? |
Code: | $ uname -r
2.6.9-gentoo-r9 |
_________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
gaffiere Guru
Joined: 13 Nov 2003 Posts: 406 Location: Provincia Milano
|
Posted: Tue Dec 14, 2004 10:04 pm Post subject: |
|
|
urca... a me fà ancora lo stesso scherzo, nonstante abbia la tua stessa versione del kernel.
quando l'ho compilato ho usato il vecchio kernel come base, con il make oldconfig... potrebbe essere stato questo? (anche se mi pare strano)
oppure potrebbe dipendere dalla scheda video... qui NVIDIA, lì?
see ya _________________ Thomaz "Gaffiere"
Middle-Earth XP2200+, 1Gb Ram, 80Gb + 160Gb Hd, SbLive!, Nvidia 6800GT AGP8x
Gentoo Gnu/Linux 2.6.12-gentoo-r10 |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30996 Location: here
|
Posted: Tue Dec 14, 2004 10:08 pm Post subject: |
|
|
ati mobility 7500 _________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
gaffiere Guru
Joined: 13 Nov 2003 Posts: 406 Location: Provincia Milano
|
Posted: Tue Dec 14, 2004 10:12 pm Post subject: |
|
|
mboh... sarà quello...
see ya _________________ Thomaz "Gaffiere"
Middle-Earth XP2200+, 1Gb Ram, 80Gb + 160Gb Hd, SbLive!, Nvidia 6800GT AGP8x
Gentoo Gnu/Linux 2.6.12-gentoo-r10 |
|
Back to top |
|
|
Cerberos86 Guru
Joined: 13 Dec 2003 Posts: 581 Location: Padova
|
Posted: Wed Dec 15, 2004 1:45 pm Post subject: |
|
|
Io avevo cominciato con bootsplash, patchando il kernel e incasinando un po' le cose.... Ti consiglio di salvarti il .config del kernel, e riemergere....
Poi segui questa guida che secondo me è perfetta....
Good Luck _________________ Account jabber: cerberos@jabber.org
"I'm using the hand..." ~ Guybrush Threepwood ~ |
|
Back to top |
|
|
Wave2184 Apprentice
Joined: 02 Nov 2003 Posts: 189 Location: Roma
|
Posted: Fri Dec 17, 2004 11:32 am Post subject: |
|
|
Cerberos86 wrote: | Io avevo cominciato con bootsplash, patchando il kernel e incasinando un po' le cose.... Ti consiglio di salvarti il .config del kernel, e riemergere....
Poi segui questa guida che secondo me è perfetta....
Good Luck |
avev gia trovato questa guida..grazie..
l ho seguita...:
ho attivato le opzioni nel kernel
ho dato make
ho emerso splashutils
ho dato meke modules_install
ho installato il kernel in boot
ho editato lilo.conf
ho aggiunto splash ai runlevel di defoult
ma nn succede nulla...dalla guida mi sembra di capire che esiste un theme di default ma evidentemente mi sbaglio....devo crearmene uno io???in effetti io ho messo emergence come theme ma all'avvio mi dice che non riesce a trovare l'immagine.bmp ....dove sbaglio??? _________________ LINUX:sbav:
Powered by Gentoo 2004.2
Powered by Ubuntu 5.10 |
|
Back to top |
|
|
Wave2184 Apprentice
Joined: 02 Nov 2003 Posts: 189 Location: Roma
|
Posted: Fri Dec 17, 2004 12:45 pm Post subject: |
|
|
aggiornamento.....
ho eseguito questi comandi..
Code: |
# mount /boot
# cd /etc/splash
# splash_geninitramfs -v -g /boot/fbsplash-emergence-1024x768 -r 1024x768 emergence
|
e aggiunto questo nella relativa voce in lilo.conf
Code: |
append="video=vesafb:ywrap,mtrr,1280x1024-32@70 splash=verbose,theme:emergence"
initrd = /boot/fbsplash-emergence-1280x1024
|
ma al boot non succede nulla..e quando carica i runleve ([ OK ]) l'ultimo che è splash mi dice che non trova l'immagine....e parte il login.... _________________ LINUX:sbav:
Powered by Gentoo 2004.2
Powered by Ubuntu 5.10 |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30996 Location: here
|
Posted: Fri Dec 17, 2004 5:53 pm Post subject: |
|
|
Cosa hai in /etc/conf.d/splash alla voce SPLASH_THEME=? E hai aggiunto splash al runlevel? _________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
Wave2184 Apprentice
Joined: 02 Nov 2003 Posts: 189 Location: Roma
|
Posted: Fri Dec 17, 2004 6:14 pm Post subject: |
|
|
fedeliallalinea wrote: | Cosa hai in /etc/conf.d/splash alla voce SPLASH_THEME=? E hai aggiunto splash al runlevel? |
Code: | # Config file for splashutils
# a theme to use, probably best left commented (the theme specified
# on the kernel command line is used)
SPLASH_THEME="emergence"
# on which ttys should fbsplash be enabled? defaults to RC_TTY_NUMBER
# SPLASH_TTYS="0 1 2 3 4 5"
# what font to use? defaults to what fbtruetype uses
# SPLASH_FONT="luxisri.ttf"
# boot/reboot/shutdown message overrides
# SPLASH_BOOT_MESSAGE="Booting the system"
# SPLASH_REBOOT_MESSAGE="Rebooting the system"
# SPLASH_SHUTDOWN_MESSAGE="Shutting the system down"
# should we drop to verbose mode on initscript errors? (yes/no)
SPLASH_VERBOSE_ON_ERRORS="yes"
# allows to set different themes on different consoles
# format: "<console>:<theme> <console>:<theme> (...)"
# SPLASH_TTY_MAP="1:emergence"
|
nn c'era niente a quella voce....ho aggiunto emergence ma non cambia nulla....
per quanto riguarda il runlevel Code: |
alsasound | boot
bootmisc | boot
bootsplash |
checkfs | boot
checkroot | boot
clock | boot
consolefont | boot
crypto-loop |
cupsd |
domainname |
famd |
gkrellmd |
gpm |
hdparm |
hostname | boot
hotplug | default
keymaps | boot
lisa |
local | default nonetwork
localmount | boot
mldonkey |
modules | boot
mtinkd |
net.eth0 | default
net.lo | boot
netmount | default
nscd |
numlock |
portmap |
reslisa |
rmnologin | boot
rsyncd |
samba |
serial | boot
smartd |
splash | default
sshd |
syslog-ng | default
urandom | boot
vixie-cron | default
xdm |
xfs |
|
_________________ LINUX:sbav:
Powered by Gentoo 2004.2
Powered by Ubuntu 5.10 |
|
Back to top |
|
|
Wave2184 Apprentice
Joined: 02 Nov 2003 Posts: 189 Location: Roma
|
Posted: Sat Dec 18, 2004 8:31 am Post subject: |
|
|
ma allora sono destinato a non avere il framebuffer con gensplash??? _________________ LINUX:sbav:
Powered by Gentoo 2004.2
Powered by Ubuntu 5.10 |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30996 Location: here
|
Posted: Sat Dec 18, 2004 9:05 am Post subject: |
|
|
Oltre a quelle opzioni nella guida vedi di avere attivato anche nel kenrnel
Code: | Device Drivers ---> Block devices --->
<*> RAM disk support
(4096) Default RAM disk size (kbytes)
[*] Initial RAM disk (initrd) support
[*] Support for Large Block Devices |
_________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
Wave2184 Apprentice
Joined: 02 Nov 2003 Posts: 189 Location: Roma
|
Posted: Sat Dec 18, 2004 10:12 am Post subject: |
|
|
fedeliallalinea wrote: | Oltre a quelle opzioni nella guida vedi di avere attivato anche nel kenrnel
Code: | Device Drivers ---> Block devices --->
<*> RAM disk support
(4096) Default RAM disk size (kbytes)
[*] Initial RAM disk (initrd) support
[*] Support for Large Block Devices |
|
tutto abilitato...
_________________ LINUX:sbav:
Powered by Gentoo 2004.2
Powered by Ubuntu 5.10 |
|
Back to top |
|
|
|