View previous topic :: View next topic |
Author |
Message |
galon n00b
Joined: 10 Jun 2004 Posts: 52 Location: Warsaw, Poland
|
Posted: Sat Dec 18, 2004 7:48 pm Post subject: encoding dvd using k3b doesn't work |
|
|
My problem is that k3b says encoding finished with succes (although it took about 15 minutes (sic!)), but I get no *.avi file and when I check the debbuging suppport, I get this:
Code: | System
-----------------------
K3b Version:0.11.17
KDE Version: 3.3.1
QT Version: 3.3.3
videoencoding (transcode)
-----------------------
libdvdread: Using libdvdcss version 1.2.8 for DVD access
libdvdread: Couldn't find device name.
(dvd_reader.c) title 01, 2134697 blocks (0-2134696)
(dvd_reader.c) navigation packet at offset 0
[...]
extracting blocks [02131968], 19.0 MB/s, 99.9%, ETA: 0:00:00
extracting blocks [02132992], 19.0 MB/s, 99.9%, ETA: 0:00:00
extracting blocks [02134016], 19.0 MB/s, 100.0%, ETA: 0:00:00
extracting blocks [02134697], 19.0 MB/s, 100.0%, ETA: 0:00:00
(dvd_reader.c) 2134697 blocks written
[tcscan] audio frames=154388.00, estimated clip length=6175.52 seconds
[tcscan] (min/max) amplitude=(-0.543/0.667), suggested volume rescale=1.499
[tcscan] V: 154388 frames, 6175 sec @ 25.000 fps
[tcscan] A: 96.48 MB @ 128 kbps
[tcscan] CD: 650 MB | V: 553.5 MB @ 751.9 kbps
[tcscan] CD: 700 MB | V: 603.5 MB @ 819.9 kbps
[tcscan] CD: 1300 MB | V: 1203.5 MB @ 1635.0 kbps
[tcscan] CD: 1400 MB | V: 1303.5 MB @ 1770.8 kbps
transcode v0.6.11 (C) 2001-2003 Thomas Oestreich, 2003 T. Bitterberg
[transcode] warning : unused command line parameter detected (30/31)
[transcode] warning : argc[30]=,null (unused)
libdvdread: Using libdvdcss version 1.2.8 for DVD access
libdvdread: Couldn't find device name.
libdvdread: Can't open file VIDEO_TS.IFO.
[transcode] (probe) suggested AV correction -D 0 (0 ms) | AV 0 ms | 0 ms
[transcode] auto-probing source /mnt/hda4/vob (ok)
[transcode] V: import format | MPEG-2 (V=vob|A=vob)
[transcode] V: AV demux/sync | (1) sync AV at initial MPEG sequence
[transcode] V: import frame | 720x576 1.25:1 encoded @ 4:3
[transcode] V: clip frame (<-) | 720x576
[transcode] V: new aspect ratio | 720x576 1.25:1 (-B)
[transcode] V: bits/pixel | 0.079 (low)
[transcode] V: decoding fps,frc | 25.000,3
[transcode] V: multi-pass | (mode=1) writing data (pass 1) to /mnt/hda4/tmp/divx4.log
[transcode] V: Y'CbCr | YV12/I420
[transcode] A: import format | 0x2001 AC3/A52 [48000,16,2] 192 kbps
[transcode] A: export format | 0x55 MPEG layer-3 [44100,16,2] 128 kbps
[transcode] V: encoding fps,frc | 25.000,3
[transcode] A: bytes per frame | 7680 (7680.000000)
[transcode] A: adjustment | 0@1000
[transcode] V: IA32 accel mode | 3dnow (3dnow mmxext mmx asm)
[transcode] V: video buffer [import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM | (subtitle)
[transcode] warning : /usr/lib/transcode/export_xvidcvs.so: cannot open shared object file: No such file or directory
| 10 @ 720x576
[transcode] warning : (dl_loader.c) loading "/usr/lib/transcode/export_xvidcvs.so" failed
[transcode] warning : (encoder.c) loading audio export module failed
[transcode] warning : failed to init export modules
[transcode] critical: plug-in initialization failed
transcode v0.6.11 (C) 2001-2003 Thomas Oestreich, 2003 T. Bitterberg
libdvdread: Using libdvdcss version 1.2.8 for DVD access
libdvdread: Couldn't find device name.
libdvdread: Can't open file VIDEO_TS.IFO.
[transcode] (probe) suggested AV correction -D 0 (0 ms) | AV 0 ms | 0 ms
[transcode] auto-probing source /mnt/hda4/vob (ok)
[transcode] V: import format | MPEG-2 (V=vob|A=vob)
[transcode] V: AV demux/sync | (1) sync AV at initial MPEG sequence
[transcode] V: import frame | 720x576 1.25:1 encoded @ 4:3
[transcode] V: clip frame (<-) | 720x576
[transcode] V: new aspect ratio | 720x576 1.25:1 (-B)
[transcode] V: bits/pixel | 0.079 (low)
[transcode] V: decoding fps,frc | 25.000,3
[transcode] V: multi-pass | (mode=2) reading data (pass2) from /mnt/hda4/tmp/divx4.log
[transcode] V: Y'CbCr | YV12/I420
[transcode] A: import format | 0x2001 AC3/A52 [48000,16,2] 192 kbps
[transcode] A: export format | 0x55 MPEG layer-3 [44100,16,2] 128 kbps
[transcode] V: encoding fps,frc | 25.000,3
[transcode] A: bytes per frame | 7680 (7680.000000)
[transcode] A: adjustment | 0@1000
[transcode] V: IA32 accel mode | 3dnow (3dnow mmxext mmx asm)
[transcode] V: video buffer [import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM | (subtitle)
[transcode] warning : /usr/lib/transcode/export_xvidcvs.so: cannot open shared object file: No such file or directory
| 10 @ 720x576
[transcode] warning : (dl_loader.c) loading "/usr/lib/transcode/export_xvidcvs.so" failed
[transcode] warning : (encoder.c) loading audio export module failed
[transcode] warning : failed to init export modules
[transcode] critical: plug-in initialization failed
libdvdread: Using libdvdcss version 1.2.8 for DVD access
libdvdread: Couldn't find device name.
(dvd_reader.c) title 01, 2134697 blocks (0-2134696)
(dvd_reader.c) navigation packet at offset 0
extracting blocks [00001024], 34.0 MB/s, 0.0%, ETA: 0:00:00
extracting blocks [00002048], 32.6 MB/s, 0.1%, ETA: 0:00:00
[...]
extracting blocks [02134016], 19.0 MB/s, 100.0%, ETA: 0:00:00
extracting blocks [02134697], 19.0 MB/s, 100.0%, ETA: 0:00:00
(dvd_reader.c) 2134697 blocks written
[tcscan] audio frames=154388.00, estimated clip length=6175.52 seconds
[tcscan] (min/max) amplitude=(-0.543/0.667), suggested volume rescale=1.499
[tcscan] V: 154388 frames, 6175 sec @ 25.000 fps
[tcscan] A: 96.48 MB @ 128 kbps
[tcscan] CD: 650 MB | V: 553.5 MB @ 751.9 kbps
[tcscan] CD: 700 MB | V: 603.5 MB @ 819.9 kbps
[tcscan] CD: 1300 MB | V: 1203.5 MB @ 1635.0 kbps
[tcscan] CD: 1400 MB | V: 1303.5 MB @ 1770.8 kbps
transcode v0.6.11 (C) 2001-2003 Thomas Oestreich, 2003 T. Bitterberg
[transcode] warning : unused command line parameter detected (30/31)
[transcode] warning : argc[30]=,null (unused)
libdvdread: Using libdvdcss version 1.2.8 for DVD access
libdvdread: Couldn't find device name.
libdvdread: Can't open file VIDEO_TS.IFO.
[transcode] (probe) suggested AV correction -D 0 (0 ms) | AV 0 ms | 0 ms
[transcode] auto-probing source /mnt/hda4/vob (ok)
[transcode] V: import format | MPEG-2 (V=vob|A=vob)
[transcode] V: AV demux/sync | (1) sync AV at initial MPEG sequence
[transcode] V: import frame | 720x576 1.25:1 encoded @ 4:3
[transcode] V: clip frame (<-) | 720x576
[transcode] V: new aspect ratio | 720x576 1.25:1 (-B)
[transcode] V: bits/pixel | 0.079 (low)
[transcode] V: decoding fps,frc | 25.000,3
[transcode] V: multi-pass | (mode=1) writing data (pass 1) to /mnt/hda4/tmp/divx4.log
[transcode] V: Y'CbCr | YV12/I420
[transcode] A: import format | 0x2001 AC3/A52 [48000,16,2] 192 kbps
[transcode] A: export format | 0x55 MPEG layer-3 [44100,16,2] 128 kbps
[transcode] V: encoding fps,frc | 25.000,3
[transcode] A: bytes per frame | 7680 (7680.000000)
[transcode] A: adjustment | 0@1000
[transcode] V: IA32 accel mode | 3dnow (3dnow mmxext mmx asm)
[transcode] V: video buffer [import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM | (subtitle)
[transcode] warning : /usr/lib/transcode/export_xvidcvs.so: cannot open shared object file: No such file or directory
| 10 @ 720x576
[transcode] warning : (dl_loader.c) loading "/usr/lib/transcode/export_xvidcvs.so" failed
[transcode] warning : (encoder.c) loading audio export module failed
[transcode] warning : failed to init export modules
[transcode] critical: plug-in initialization failed
transcode v0.6.11 (C) 2001-2003 Thomas Oestreich, 2003 T. Bitterberg
libdvdread: Using libdvdcss version 1.2.8 for DVD access
libdvdread: Couldn't find device name.
libdvdread: Can't open file VIDEO_TS.IFO.
[transcode] (probe) suggested AV correction -D 0 (0 ms) | AV 0 ms | 0 ms
[transcode] auto-probing source /mnt/hda4/vob (ok)
[transcode] V: import format | MPEG-2 (V=vob|A=vob)
[transcode] V: AV demux/sync | (1) sync AV at initial MPEG sequence
[transcode] V: import frame | 720x576 1.25:1 encoded @ 4:3
[transcode] V: clip frame (<-) | 720x576
[transcode] V: new aspect ratio | 720x576 1.25:1 (-B)
[transcode] V: bits/pixel | 0.079 (low)
[transcode] V: decoding fps,frc | 25.000,3
[transcode] V: multi-pass | (mode=2) reading data (pass2) from /mnt/hda4/tmp/divx4.log
[transcode] V: Y'CbCr | YV12/I420
[transcode] A: import format | 0x2001 AC3/A52 [48000,16,2] 192 kbps
[transcode] A: export format | 0x55 MPEG layer-3 [44100,16,2] 128 kbps
[transcode] V: encoding fps,frc | 25.000,3
[transcode] A: bytes per frame | 7680 (7680.000000)
[transcode] A: adjustment | 0@1000
[transcode] V: IA32 accel mode | 3dnow (3dnow mmxext mmx asm)
[transcode] V: video buffer [import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM | (subtitle)
[transcode] warning : /usr/lib/transcode/export_xvidcvs.so: cannot open shared object file: No such file or directory
| 10 @ 720x576
[transcode] warning : (dl_loader.c) loading "/usr/lib/transcode/export_xvidcvs.so" failed
[transcode] warning : (encoder.c) loading audio export module failed
[transcode] warning : failed to init export modules
[transcode] critical: plug-in initialization failed
|
Anybody has any ideas??
Cheers, Galon
P. S. I checked various settings, various encoders (xvid, divix). |
|
Back to top |
|
|
Raoul_Duke l33t
Joined: 15 Dec 2002 Posts: 694 Location: Caerdydd, Wales
|
Posted: Sun Dec 19, 2004 10:27 am Post subject: |
|
|
Check the 'USE' flags that you emerged transcode with. Might be something there.
Also, i find DVDrip to be much easier than K3B. _________________ www.iamthepenguin.com |
|
Back to top |
|
|
galon n00b
Joined: 10 Jun 2004 Posts: 52 Location: Warsaw, Poland
|
Posted: Sun Dec 19, 2004 3:55 pm Post subject: |
|
|
OK, I'll try DVDrip later , but for the moment could anybody please send me your USE flags settings in make.conf, please. I'm asking for settings from people, who have, in fact, a working, DVD-ripping k3b.
Galon |
|
Back to top |
|
|
mog Apprentice
Joined: 05 Jul 2003 Posts: 253 Location: Auckland [NZ]
|
Posted: Wed Dec 29, 2004 10:06 am Post subject: |
|
|
yeah ... I'd be interested as well.
everytime I tried ripping a dvd with k3b it would finish the vob creation and then the encoding would be over very quickly, but no avi got created ... (obviously )
any suggestions are appreciated _________________ To thine own self be true. |
|
Back to top |
|
|
smileyguy Tux's lil' helper
Joined: 26 Dec 2004 Posts: 80
|
Posted: Wed Dec 29, 2004 4:36 pm Post subject: |
|
|
I have encoded dvd video with k3b. I have the following packages installed with the USE flags indicated for each one.
media-video/transcode-0.6.11 +3dnow +X (-altivec) +avi -debug+encode +mmx +mpeg +quicktime +sdl +sse
app-cdr/k3b-0.11.17 +arts -debug +dvdr +encode +flac +kde +mad +oggvorbis -xinerama
media-libs/divx4linux-20030428-r1
media-video/ffmpeg-0.4.7 -aac -debug -doc +dvd +encode +imlib +mmx +oggvorbis +sdl -static +truetype
media-libs/libdvdcss-1.2.8
media-libs/libdvdread-0.9.4
media-video/mpeg2vidcodec-12-r1
media-video/avifile-0.7.41.20041001-r1 +3dnow +X +alsa +avi -debug +dvd +esd +mmx +oggvorbis +qt +sdl +sse -static +truetype +xv +zlib
My full USE is
Code: | USE="dts 3dnow 3dnowex aalib alsa arts cdr curl cups dga divx4linux dvd dvdr dvdread foomaticdb ggi -gnome gtk ipv6 kerberos maildir mmx mmx2 mozilla nptl perl ppds real scanner socks5 sse svga tiff unicode usb videos xml" |
I'm also using QT 3.3.3 and KDE 3.3.1.
If you find that the relevant USE variables are the same, try using different video codecs (DivX instead of Xvid). Check /usr/lib/transcode/export_*.so to make sure everything compiled and installed correctly. And, of course, make sure you have enough free drive space for the .vob copy and the .avi. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|