| View previous topic :: View next topic |
| Author |
Message |
coax
Apprentice
Joined: 08 Sep 2003
Posts: 231
Location: Antwerp - Belgium
|
 Posted: Thu Dec 23, 2004 11:36 am Post subject: scsi0 hangs for a few seconds, then gives output in syslog |
 |
|
I have a computer with 3 harddrives. The first one with the operating system and programs on it is a maxtor atlas scsi drive.
Every now and then, it seems like the driver hangs when I run a program like open a Terminal.
I configured scsi harddisk support in my kernel. I also enabled Adaptec AIC79xx U320 support, since my scsi controller is an ultra 320 one.
Here is an extract of my syslog output, but I don't know what it means:
| Code: | Dec 23 12:27:58 homer scsi0: WARNING no command for scb 14 (cmdcmplt)
Dec 23 12:27:58 homer QOUTPOS = 196
Dec 23 12:27:58 homer >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Dec 23 12:27:58 homer scsi0: Dumping Card State at program address 0x94 Mode 0x22
Dec 23 12:27:58 homer Completions are pending
Dec 23 12:27:58 homer HS_MAILBOX[0x0] INTCTL[0xc0]:(SWTMINTEN|SWTMINTMASK)
Dec 23 12:27:58 homer SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x31]:(CURRFIFO_1|FIFO0FREE|FIFO1FREE)
Dec 23 12:27:58 homer SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
Dec 23 12:27:58 homer LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
Dec 23 12:27:58 homer SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x10]:(FASTMODE)
Dec 23 12:27:58 homer SEQINTCTL[0x80]:(INTVEC1DSL) SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0]
Dec 23 12:27:58 homer SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0]
Dec 23 12:27:58 homer PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
Dec 23 12:27:58 homer LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
Dec 23 12:27:58 homer LQOSTAT1[0x0] LQOSTAT2[0x1]:(LQOSTOP0)
Dec 23 12:27:58 homer
Dec 23 12:27:58 homer SCB Count = 32 CMDS_PENDING = 2 LASTSCB 0xb CURRSCB 0x1 NEXTSCB 0xffc0
Dec 23 12:27:58 homer qinstart = 3306 qinfifonext = 3306
Dec 23 12:27:58 homer QINFIFO:
Dec 23 12:27:58 homer WAITING_TID_QUEUES:
Dec 23 12:27:58 homer Pending list:
Dec 23 12:27:58 homer 21 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x47]
Dec 23 12:27:58 homer 22 FIFO_USE[0x0] SCB_CONTROL[0x68]:(STATUS_RCVD|TAG_ENB|DISCENB)
Dec 23 12:27:58 homer SCB_SCSIID[0x47]
Dec 23 12:27:58 homer 19 FIFO_USE[0x0] SCB_CONTROL[0x68]:(STATUS_RCVD|TAG_ENB|DISCENB)
Dec 23 12:27:58 homer SCB_SCSIID[0x47]
Dec 23 12:27:58 homer 25 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x47]
Dec 23 12:27:58 homer Total 4
Dec 23 12:27:58 homer Kernel Free SCB list: 29 1 17 14 2 11 4 27 5 0 10 6 23 20 12 7 15 3 28 8 13 16 31 30 26 9 24 18
Dec 23 12:27:58 homer Sequencer Complete DMA-inprog list:
Dec 23 12:27:58 homer Sequencer Complete list:
Dec 23 12:27:58 homer Sequencer DMA-Up and Complete list:
Dec 23 12:27:58 homer
Dec 23 12:27:58 homer scsi0: FIFO0 Free, LONGJMP == 0x825e, SCB 0x2
Dec 23 12:27:58 homer SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Dec 23 12:27:58 homer SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
Dec 23 12:27:58 homer SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
Dec 23 12:27:58 homer SOFFCNT[0x7f] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
Dec 23 12:27:58 homer HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x0]
Dec 23 12:27:58 homer scsi0: FIFO1 Active, LONGJMP == 0x825e, SCB 0x15
Dec 23 12:27:58 homer SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Dec 23 12:27:58 homer SEQINTSRC[0x10]:(CFG4DATA) DFCNTRL[0x0] DFSTATUS[0x8a]:(FIFOFULL|HDONE|PRELOAD_AVAIL)
Dec 23 12:27:58 homer SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
Dec 23 12:27:58 homer SOFFCNT[0x7f] MDFFSTAT[0x2]:(DATAINFIFO) SHADDR = 0x0702, SHCNT = 0xfff8fe
Dec 23 12:27:58 homer HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
Dec 23 12:27:58 homer LQIN: 0x4 0x0 0x0 0x15 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x40 0x0 0x0 0x0 0x2 0x0
Dec 23 12:27:58 homer scsi0: LQISTATE = 0x1f, LQOSTATE = 0x0, OPTIONMODE = 0x42
Dec 23 12:27:58 homer scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2
Dec 23 12:27:58 homer
Dec 23 12:27:58 homer SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
Dec 23 12:27:58 homer CCSCBCTL[0x0]
Dec 23 12:27:58 homer scsi0: REG0 == 0x1, SINDEX = 0x133, DINDEX = 0x10a
Dec 23 12:27:58 homer scsi0: SCBPTR == 0x13, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbc
Dec 23 12:27:58 homer CDB 28 0 0 80 8 9c
Dec 23 12:27:58 homer STACK: 0x1 0x125 0x125 0x25e 0x25e 0x25e 0x17a 0x29
Dec 23 12:27:58 homer <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Dec 23 12:27:58 homer DevQ(0:4:0): 0 waiting
Dec 23 12:27:58 homer scsi0: WARNING no command for scb 17 (cmdcmplt)
Dec 23 12:27:58 homer QOUTPOS = 197
Dec 23 12:27:58 homer >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Dec 23 12:27:58 homer scsi0: Dumping Card State at program address 0x27 Mode 0x22
Dec 23 12:27:58 homer Completions are pending
Dec 23 12:27:58 homer HS_MAILBOX[0x0] INTCTL[0xc0]:(SWTMINTEN|SWTMINTMASK)
Dec 23 12:27:58 homer SEQINTSTAT[0x10]:(SEQ_SWTMRTO) SAVED_MODE[0x11] DFFSTAT[0x11]:(CURRFIFO_1|FIFO0FREE)
Dec 23 12:27:58 homer SCSISIGI[0x64]:(P_DATAIN_DT|BSYI) SCSIPHASE[0x2]:(DATA_IN_PHASE)
Dec 23 12:27:58 homer SCSIBUS[0x20] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
Dec 23 12:27:58 homer SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
Dec 23 12:27:58 homer SEQCTL0[0x10]:(FASTMODE) SEQINTCTL[0x0] SEQ_FLAGS[0x0]
Dec 23 12:27:58 homer SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x9]:(REQINIT|BUSFREE)
Dec 23 12:27:58 homer SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
Dec 23 12:27:58 homer LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED)
Dec 23 12:27:58 homer LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x81]:(LQOSTOP0)
Dec 23 12:27:58 homer
Dec 23 12:27:58 homer SCB Count = 32 CMDS_PENDING = 2 LASTSCB 0xb CURRSCB 0x1 NEXTSCB 0xffc0
Dec 23 12:27:58 homer qinstart = 3306 qinfifonext = 3306
Dec 23 12:27:58 homer QINFIFO:
Dec 23 12:27:58 homer WAITING_TID_QUEUES:
Dec 23 12:27:58 homer Pending list:
Dec 23 12:27:58 homer 21 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x47]
Dec 23 12:27:58 homer 22 FIFO_USE[0x1] SCB_CONTROL[0x68]:(STATUS_RCVD|TAG_ENB|DISCENB)
Dec 23 12:27:58 homer SCB_SCSIID[0x47]
Dec 23 12:27:58 homer 19 FIFO_USE[0x0] SCB_CONTROL[0x68]:(STATUS_RCVD|TAG_ENB|DISCENB)
Dec 23 12:27:58 homer SCB_SCSIID[0x47]
Dec 23 12:27:58 homer 25 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x47]
Dec 23 12:27:58 homer Total 4
Dec 23 12:27:58 homer Kernel Free SCB list: 29 1 17 14 2 11 4 27 5 0 10 6 23 20 12 7 15 3 28 8 13 16 31 30 26 9 24 18
Dec 23 12:27:58 homer Sequencer Complete DMA-inprog list:
Dec 23 12:27:58 homer Sequencer Complete list:
Dec 23 12:27:58 homer Sequencer DMA-Up and Complete list:
Dec 23 12:27:58 homer
Dec 23 12:27:58 homer scsi0: FIFO0 Active, LONGJMP == 0x825e, SCB 0x15
Dec 23 12:27:58 homer SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Dec 23 12:27:58 homer SEQINTSRC[0x20]:(SAVEPTRS) DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
Dec 23 12:27:58 homer SG_CACHE_SHADOW[0xa]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
Dec 23 12:27:58 homer SOFFCNT[0x0] MDFFSTAT[0xc]:(DLZERO|SHVALID) SHADDR = 0x01b37e000, SHCNT = 0x3000
Dec 23 12:27:58 homer HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
Dec 23 12:27:58 homer scsi0: FIFO1 Active, LONGJMP == 0x25e, SCB 0x15
Dec 23 12:27:58 homer SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Dec 23 12:27:58 homer SEQINTSRC[0x0] DFCNTRL[0x28]:(HDMAEN|SCSIEN) DFSTATUS[0x81]:(FIFOEMP|PRELOAD_AVAIL)
Dec 23 12:27:58 homer SG_CACHE_SHADOW[0xa]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
Dec 23 12:27:58 homer SOFFCNT[0x0] MDFFSTAT[0xe]:(DATAINFIFO|DLZERO|SHVALID)
Dec 23 12:27:58 homer SHADDR = 0x01b37ee00, SHCNT = 0x2200 HADDR = 0x01b37ee00, HCNT = 0x2200
Dec 23 12:27:58 homer CCSGCTL[0x10]:(SG_CACHE_AVAIL)
Dec 23 12:27:58 homer LQIN: 0x4 0x0 0x0 0x15 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x22 0x0 0x0 0x0 0x2 0x0
Dec 23 12:27:58 homer scsi0: LQISTATE = 0x1a, LQOSTATE = 0x0, OPTIONMODE = 0x42
Dec 23 12:27:58 homer scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2
Dec 23 12:27:58 homer SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
Dec 23 12:27:58 homer CCSCBCTL[0x0]
Dec 23 12:27:58 homer scsi0: REG0 == 0x1, SINDEX = 0x122, DINDEX = 0x10a
Dec 23 12:27:58 homer scsi0: SCBPTR == 0x13, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffbc
Dec 23 12:27:58 homer CDB 28 0 0 80 8 9c
Dec 23 12:27:58 homer STACK: 0x15 0x125 0x125 0x25e 0x25e 0x25e 0x25e 0x29
Dec 23 12:27:58 homer <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Dec 23 12:27:58 homer DevQ(0:4:0): 0 waiting
Dec 23 12:28:28 homer scsi0:0:4:0: Attempting to abort cmd d3e2bc80: 0x28 0x0 0x0 0x4 0x39 0xe7 0x0 0x0 0x8 0x0
Dec 23 12:28:28 homer scsi0: At time of recovery, card was not paused
Dec 23 12:28:28 homer >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Dec 23 12:28:28 homer scsi0: Dumping Card State at program address 0x25 Mode 0x0
Dec 23 12:28:28 homer Card was paused
Dec 23 12:28:28 homer HS_MAILBOX[0x0] INTCTL[0xc0]:(SWTMINTEN|SWTMINTMASK)
Dec 23 12:28:28 homer SEQINTSTAT[0x10]:(SEQ_SWTMRTO) SAVED_MODE[0x11] DFFSTAT[0x31]:(CURRFIFO_1|FIFO0FREE|FIFO1FREE)
Dec 23 12:28:28 homer SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
Dec 23 12:28:28 homer LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
Dec 23 12:28:28 homer SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x10]:(FASTMODE)
Dec 23 12:28:28 homer SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
Dec 23 12:28:28 homer SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
Dec 23 12:28:28 homer SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0]
Dec 23 12:28:28 homer LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0]
Dec 23 12:28:28 homer LQOSTAT2[0x1]:(LQOSTOP0)
Dec 23 12:28:28 homer
Dec 23 12:28:28 homer SCB Count = 32 CMDS_PENDING = 0 LASTSCB 0x19 CURRSCB 0x4 NEXTSCB 0xff80
Dec 23 12:28:28 homer qinstart = 3316 qinfifonext = 3316
Dec 23 12:28:28 homer QINFIFO:
Dec 23 12:28:28 homer WAITING_TID_QUEUES:
Dec 23 12:28:28 homer Pending list:
Dec 23 12:28:28 homer 22 FIFO_USE[0x0] SCB_CONTROL[0x68]:(STATUS_RCVD|TAG_ENB|DISCENB)
Dec 23 12:28:28 homer SCB_SCSIID[0x47]
Dec 23 12:28:28 homer 19 FIFO_USE[0x0] SCB_CONTROL[0x68]:(STATUS_RCVD|TAG_ENB|DISCENB)
Dec 23 12:28:28 homer SCB_SCSIID[0x47]
Dec 23 12:28:28 homer Total 2
Dec 23 12:28:28 homer Kernel Free SCB list: 4 14 29 11 17 21 25 2 1 27 5 0 10 6 23 20 12 7 15 3 28 8 13 16 31 30 26 9 24 18
Dec 23 12:28:28 homer Sequencer Complete DMA-inprog list:
Dec 23 12:28:28 homer Sequencer Complete list:
Dec 23 12:28:28 homer Sequencer DMA-Up and Complete list:
Dec 23 12:28:28 homer
Dec 23 12:28:28 homer scsi0: FIFO0 Free, LONGJMP == 0x825e, SCB 0x1d
Dec 23 12:28:28 homer SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Dec 23 12:28:28 homer SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
Dec 23 12:28:28 homer SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
Dec 23 12:28:28 homer SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
Dec 23 12:28:28 homer HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
Dec 23 12:28:28 homer scsi0: FIFO1 Free, LONGJMP == 0x825e, SCB 0x4
Dec 23 12:28:28 homer SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Dec 23 12:28:28 homer SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
Dec 23 12:28:28 homer SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
Dec 23 12:28:28 homer SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
Dec 23 12:28:28 homer HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
Dec 23 12:28:28 homer LQIN: 0x55 0x3c 0x0 0x4 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Dec 23 12:28:28 homer scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42
Dec 23 12:28:28 homer scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2
Dec 23 12:28:28 homer
Dec 23 12:28:28 homer SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
Dec 23 12:28:28 homer CCSCBCTL[0x0]
Dec 23 12:28:28 homer scsi0: REG0 == 0x7e60, SINDEX = 0x100, DINDEX = 0x10a
Dec 23 12:28:28 homer scsi0: SCBPTR == 0x1d, SCB_NEXT == 0x1, SCB_NEXT2 == 0xffbc
Dec 23 12:28:28 homer CDB 28 0 0 80 8 f4
Dec 23 12:28:28 homer STACK: 0x14 0x125 0x125 0x25e 0x25e 0x240 0x93 0x23
Dec 23 12:28:28 homer <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Dec 23 12:28:28 homer DevQ(0:4:0): 0 waiting
Dec 23 12:28:28 homer (scsi0:A:4:0): Device is disconnected, re-queuing SCB
Dec 23 12:28:28 homer Recovery code sleeping
Dec 23 12:28:28 homer (scsi0:A:4:0): Task Management Func 0x1 Complete
Dec 23 12:28:28 homer Recovery SCB completes
Dec 23 12:28:28 homer Recovery code awake
Dec 23 12:28:28 homer scsi0:0:4:0: Attempting to abort cmd d3e2b680: 0x28 0x0 0x0 0x4 0x3a 0x47 0x0 0x0 0x8 0x0
Dec 23 12:28:28 homer scsi0: At time of recovery, card was not paused
Dec 23 12:28:28 homer >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Dec 23 12:28:28 homer scsi0: Dumping Card State at program address 0x28 Mode 0x11
Dec 23 12:28:28 homer Card was paused
Dec 23 12:28:28 homer HS_MAILBOX[0x0] INTCTL[0xc0]:(SWTMINTEN|SWTMINTMASK)
Dec 23 12:28:28 homer SEQINTSTAT[0x10]:(SEQ_SWTMRTO) SAVED_MODE[0x11] DFFSTAT[0x31]:(CURRFIFO_1|FIFO0FREE|FIFO1FREE)
Dec 23 12:28:28 homer SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
Dec 23 12:28:28 homer LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
Dec 23 12:28:28 homer SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x10]:(FASTMODE)
Dec 23 12:28:28 homer SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
Dec 23 12:28:28 homer SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
Dec 23 12:28:28 homer SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0]
Dec 23 12:28:28 homer LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0]
Dec 23 12:28:28 homer LQOSTAT2[0x1]:(LQOSTOP0)
Dec 23 12:28:28 homer
Dec 23 12:28:28 homer SCB Count = 32 CMDS_PENDING = 1 LASTSCB 0x13 CURRSCB 0x13 NEXTSCB 0xff80
Dec 23 12:28:28 homer qinstart = 3318 qinfifonext = 3318
Dec 23 12:28:28 homer QINFIFO:
Dec 23 12:28:28 homer WAITING_TID_QUEUES:
Dec 23 12:28:28 homer Pending list:
Dec 23 12:28:28 homer 22 FIFO_USE[0x0] SCB_CONTROL[0x68]:(STATUS_RCVD|TAG_ENB|DISCENB)
Dec 23 12:28:28 homer SCB_SCSIID[0x47]
Dec 23 12:28:28 homer Total 1
Dec 23 12:28:28 homer Kernel Free SCB list: 19 4 14 29 11 17 21 25 2 1 27 5 0 10 6 23 20 12 7 15 3 28 8 13 16 31 30 26 9 24 18
Dec 23 12:28:28 homer Sequencer Complete DMA-inprog list:
Dec 23 12:28:28 homer Sequencer Complete list:
Dec 23 12:28:28 homer Sequencer DMA-Up and Complete list:
Dec 23 12:28:28 homer
Dec 23 12:28:28 homer scsi0: FIFO0 Free, LONGJMP == 0x825e, SCB 0x1d
Dec 23 12:28:28 homer SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Dec 23 12:28:28 homer SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
Dec 23 12:28:28 homer SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
Dec 23 12:28:28 homer SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
Dec 23 12:28:28 homer HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
Dec 23 12:28:28 homer scsi0: FIFO1 Free, LONGJMP == 0x825e, SCB 0x4
Dec 23 12:28:28 homer SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Dec 23 12:28:28 homer SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
Dec 23 12:28:28 homer SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
Dec 23 12:28:28 homer SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
Dec 23 12:28:28 homer HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
Dec 23 12:28:28 homer LQIN: 0x55 0x3c 0x0 0x13 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Dec 23 12:28:28 homer scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42
Dec 23 12:28:28 homer scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
Dec 23 12:28:28 homer
Dec 23 12:28:28 homer SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
Dec 23 12:28:28 homer CCSCBCTL[0x0]
Dec 23 12:28:28 homer scsi0: REG0 == 0x60, SINDEX = 0x111, DINDEX = 0x10a
Dec 23 12:28:28 homer scsi0: SCBPTR == 0x4, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xffbc
Dec 23 12:28:28 homer CDB 0 30 0 80 8 e0
Dec 23 12:28:28 homer STACK: 0x15 0x125 0x125 0x25e 0x25e 0x240 0x93 0x26
Dec 23 12:28:28 homer <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Dec 23 12:28:28 homer DevQ(0:4:0): 0 waiting
Dec 23 12:28:28 homer (scsi0:A:4:0): Device is disconnected, re-queuing SCB
Dec 23 12:28:28 homer Recovery code sleeping
Dec 23 12:28:28 homer (scsi0:A:4:0): Task Management Func 0x1 Complete
Dec 23 12:28:28 homer Recovery SCB completes
Dec 23 12:28:28 homer Recovery code awake
Dec 23 12:28:28 homer (scsi0:A:4): 160.000MB/s transfers (80.000MHz DT, 16bit)
Dec 23 12:28:28 homer su(pam_unix)[20557]: session closed for user root
Dec 23 12:28:42 homer su[20731]: PAM pam_putenv: delete non-existent entry; REMOTEHOST
Dec 23 12:28:42 homer PAM-env[20731]: Unknown PAM_ITEM: <XAUTHORITY>
Dec 23 12:28:42 homer su[20731]: PAM pam_putenv: delete non-existent entry; XAUTHORITY
Dec 23 12:28:42 homer su(pam_unix)[20731]: session opened for user root by coax(uid=1000)
|
_________________
- There is no such thing as having too many computers - |
|
| Back to top |
|
 |
stealthy
Tux's lil' helper
Joined: 08 Aug 2002
Posts: 118
Location: ONTARIO CANADA
|
| Posted: Thu Dec 23, 2004 2:26 pm Post subject: re: scsi0 hangs for a few seconds, then gives output in |
|
|
Hmm...
I have seen that twice before first time time it was my drive that was crapping out ...and second time it was the cable.
Now I am assuming that your drive is also U320, and you are using U320 scsi cable with a terminator.
Actually I guess as long the cable is LVD with a LVD terminator you should be ok.
try switching the drive onto a different port
_________________
All your Gentoo are belong to us. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
