jdmulloy
Tux's lil' helper
Joined: 24 Dec 2004
Posts: 139
Location: Massachusetts, USA
|
 Posted: Sat Feb 02, 2008 10:16 am Post subject: VIA VT6420 Hotplug doesn't work |
 |
|
I have a board with a VIA VT6420 SATA RAID(fakeRAID) Controller and I think it's supposed to support hotplug but I can't get linux to see the drive if I plug it in once the Machine is up and running or get the drive back if I unplug it during operation. Anyone know anything about this hardware or the drivers?
I get this in the log
| Quote: | Feb 2 02:00:54 carbon ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
Feb 2 02:00:54 carbon ata1.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 16384 in
Feb 2 02:00:54 carbon res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Feb 2 02:00:59 carbon ata1: port is slow to respond, please be patient (Status 0xd0)
Feb 2 02:01:03 carbon uvesafb: mode switch failed (eax=0x14f, err=0). Trying again with default timings.
Feb 2 02:01:04 carbon ata1: soft resetting port
Feb 2 02:01:35 carbon ata1.00: qc timeout (cmd 0xec)
Feb 2 02:01:35 carbon ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Feb 2 02:01:35 carbon ata1.00: revalidation failed (errno=-5)
Feb 2 02:01:35 carbon ata1: failed to recover some devices, retrying in 5 secs
Feb 2 02:01:35 carbon uptimed: moving up to position 24: 0 days, 00:04:22
Feb 2 02:01:45 carbon ata1: port is slow to respond, please be patient (Status 0xd0)
Feb 2 02:01:45 carbon uvesafb: mode switch failed (eax=0x14f, err=0). Trying again with default timings.
Feb 2 02:01:50 carbon ata1: soft resetting port
Feb 2 02:02:20 carbon ata1.00: qc timeout (cmd 0xec)
Feb 2 02:02:20 carbon ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Feb 2 02:02:20 carbon ata1.00: revalidation failed (errno=-5)
Feb 2 02:02:20 carbon ata1.00: limiting speed to UDMA/133:PIO3
Feb 2 02:02:20 carbon ata1: failed to recover some devices, retrying in 5 secs
Feb 2 02:02:30 carbon ata1: port is slow to respond, please be patient (Status 0xd0)
Feb 2 02:02:35 carbon uptimed: moving up to position 23: 0 days, 00:05:22
Feb 2 02:02:35 carbon ata1: soft resetting port
Feb 2 02:03:05 carbon ata1.00: qc timeout (cmd 0xec)
Feb 2 02:03:05 carbon ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Feb 2 02:03:05 carbon ata1.00: revalidation failed (errno=-5)
Feb 2 02:03:05 carbon ata1.00: disabled
Feb 2 02:03:06 carbon ata1: EH pending after completion, repeating EH (cnt=4)
Feb 2 02:03:11 carbon ata1: port is slow to respond, please be patient (Status 0xd0)
Feb 2 02:03:16 carbon ata1: soft resetting port
Feb 2 02:03:16 carbon ata1: EH complete
Feb 2 02:03:16 carbon sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
Feb 2 02:03:16 carbon end_request: I/O error, dev sda, sector 0
Feb 2 02:03:16 carbon Buffer I/O error on device sda, logical block 0
Feb 2 02:03:16 carbon Buffer I/O error on device sda, logical block 1
Feb 2 02:03:16 carbon Buffer I/O error on device sda, logical block 2
Feb 2 02:03:16 carbon Buffer I/O error on device sda, logical block 3
Feb 2 02:03:16 carbon sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
Feb 2 02:03:16 carbon end_request: I/O error, dev sda, sector 0
Feb 2 02:03:16 carbon Buffer I/O error on device sda, logical block 0
|
_________________
Joe Mulloy | http://twitter.com/jdmulloy | Ron Paul in 2012! | 5-1-07 | Unban Playfool | Fire your "Too big to fail" bank http://moveyourmoney.info |
|
Kernel & Hardware
