[TR] Skystar2 kurulum denemeleri

ersan · n00b Joined: 30 Dec 2004 Posts: 31

Merhabalar

Vidalinux-1.1 altinda skystar2 dijital tv kartini kurmaya calisiyorum.
vidalinux-1.1 kernel-2.6.9 ile geliyor
#uname -r
2.6.9-vidalinux1

hazirlanan turkce belgelerden yararlaniyorum
fakat bir yerde tikanip kaldim. Yaptiklarim su sekilde

#cd /usr/src/
#wget http://vidalinux.05t.us/vlos-1.1/2.6.9-vidalinux1-sources.tar.bz2
#tar xvjf 2.6.9-vidalinux1-sources.tar.bz2
#ln -s 2.6.9-vidalinux1 linux
#cd /usr/local/src
#wget http://www.linuxtv.org/dvb/linuxtv-dvb-1.1.1.tar.bz2
#tar -xvjf linuxtv-dvb-1.1.1.tar.bz2
#ln -s linuxtv-dvb-1.1.1 DVB
#cd DVB/build-2.6
#wget http://www.linuxtv.org/dvb/firmware/dvb-ttpci-01.fw-261c
#mv dvb-ttpci-01.fw-261c dvb-ttpci-01.fw
#make

burada soyle bir hata alip kaliyorum

....
create symbolic link `saa7146_fops.c' to `../linux/drivers/media/common/saa7146_fops.c'
create symbolic link `saa7146_hlp.c' to `../linux/drivers/media/common/saa7146_hlp.c'
make -C /lib/modules/2.6.9-vidalinux1/build SUBDIRS=/usr/local/src/linuxtv-dvb-1.1.1/build-2.6
make[1]: Entering directory `/usr/src/linux-2.6.9-vidalinux1'
LD /usr/local/src/linuxtv-dvb-1.1.1/build-2.6/built-in.o
CC [M] /usr/local/src/linuxtv-dvb-1.1.1/build-2.6/dvbdev.o
CC [M] /usr/local/src/linuxtv-dvb-1.1.1/build-2.6/dmxdev.o
CC [M] /usr/local/src/linuxtv-dvb-1.1.1/build-2.6/dvb_demux.o
CC [M] /usr/local/src/linuxtv-dvb-1.1.1/build-2.6/dvb_filter.o
CC [M] /usr/local/src/linuxtv-dvb-1.1.1/build-2.6/dvb_functions.o
CC [M] /usr/local/src/linuxtv-dvb-1.1.1/build-2.6/dvb_frontend.o
CC [M] /usr/local/src/linuxtv-dvb-1.1.1/build-2.6/dvb_i2c.o
CC [M] /usr/local/src/linuxtv-dvb-1.1.1/build-2.6/dvb_net.o
/usr/local/src/linuxtv-dvb-1.1.1/build-2.6/dvb_net.c: In function `dvb_net_eth_type_trans':
/usr/local/src/linuxtv-dvb-1.1.1/build-2.6/dvb_net.c:81: error: union has no member named `ethernet'
make[2]: *** [/usr/local/src/linuxtv-dvb-1.1.1/build-2.6/dvb_net.o] Error 1
make[1]: *** [_module_/usr/local/src/linuxtv-dvb-1.1.1/build-2.6] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.9-vidalinux1'
make: *** [all] Error 2

Bu sorunu nasil asabilirim?
yardimlariniz icin simdiden tesekkurler
ersan

togan · Last edited by togan on Fri Dec 31, 2004 2:59 pm; edited 1 time in total

togan · Posted: Fri Dec 31, 2004 2:34 pm Post subject: Gentoo

Selam hatýrlatmakta fayda var.

Kernelin nasýl derleneneceði ve grub ayarlarý benim yazdýðým stage kurulum howtolarýnda yazýlý.

Sorun çýkarsa yardýmcý olurum.

Kolay gelsin
_________________
Gentoo 2006.1 stage1 MSI nforce 4 Athlon64 Nvidia PCI Express
Raptor74 GB + 200 GB X 2 SATA

ersan · n00b Joined: 30 Dec 2004 Posts: 31

Merhabalar
simdi oncelikle dediklerinizi bir uygulayacagim kerneli derlemeden once
ciktilar ise su sekilde

bash-2.05b# ls -l /usr/src
total 4
lrwxr-xr-x 1 root root 22 Dec 31 11:52 linux -> linux-2.6.9-vidalinux1
drwxr-xr-x 19 root root 4096 Dec 31 15:56 linux-2.6.9-vidalinux1

bash-2.05b# lsmod
Module Size Used by
ppp_deflate 6272 0
bsd_comp 6144 0
ppp_async 11520 1
crc_ccitt 2176 1 ppp_async
ppp_generic 24468 7 ppp_deflate,bsd_comp,ppp_async
slhc 8064 1 ppp_generic
snd_pcm_oss 53800 0
snd_mixer_oss 20224 1 snd_pcm_oss
lp 12204 0
snd_intel8x0 32676 0
snd_ac97_codec 76000 1 snd_intel8x0
snd_pcm 95752 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 24708 1 snd_pcm
snd 54756 6 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 10248 2 snd_intel8x0,snd_pcm
parport_pc 31168 1
parport 40136 2 lp,parport_pc
usblp 12928 0
dm_mod 61180 0
sbp2 24456 0
ohci1394 34052 0
ohci_hcd 20868 0
uhci_hcd 32144 0
usb_storage 30208 0
usbhid 32320 0
ehci_hcd 29316 0
usbcore 115172 8 usblp,ohci_hcd,uhci_hcd,usb_storage,usbhid,ehci_hcd

bash-2.05b# lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645DX Host & Memory & AGP Controller (rev 01)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 25)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
0000:00:0d.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 01)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3)

ilginize tekrar tesekkurler
ersan

ersan · n00b Joined: 30 Dec 2004 Posts: 31

Merhabalar

#emerge -s dvb
Searching...
[ Results for search key : dvb ]
[ Applications found : 3 ]

* media-libs/libdvb
Latest version available: 0.5.0-r1
Latest version installed: [ Not Installed ]
Size of downloaded files: 249 kB
Homepage: http://www.metzlerbros.org/dvb/
Description: libdvb package with added CAM library and libdvbmpegtools as well as dvb-mpegtools
License: GPL-2

* media-libs/libdvbpsi
Latest version available: 0.1.3
Latest version installed: [ Not Installed ]
Size of downloaded files: 187 kB
Homepage: http://www.videolan.org/libdvbpsi
Description: library for MPEG TS/DVB PSI tables decoding and generation
License: GPL-2

* media-tv/linuxtv-dvb
Latest version available: 1.0.1
Latest version installed: [ Not Installed ]
Size of downloaded files: 660 kB
Homepage: http://www.linuxtv.org
Description: Standalone DVB driver for Linux kernel 2.4.x
License: GPL-2

#emerge libdvb
bu komutta linux-2.4.26.tar.bz2 yi indirmeye calisiyor
fakat bende kernel olarak linux-2.6.9 kurulu

bu durumda kerneli yeniden mi derlemem gerekir?

tesekkurler
ersan

togan · Posted: Fri Dec 31, 2004 6:22 pm Post subject: DVB

Selam,

Buradakilerin hiçbirisi kurulmayacak. Sadece söylediðim gibi kernel derlenecek ve benim yazdýklarým yapýlacak.

Kolay gelsin
_________________
Gentoo 2006.1 stage1 MSI nforce 4 Athlon64 Nvidia PCI Express
Raptor74 GB + 200 GB X 2 SATA

ersan · n00b Joined: 30 Dec 2004 Posts: 31

Merhabalar ve iyi yillar
kerneli su sekilde derlemeye calistim
#cd /usr/src
#wget http://vidalinux.05t.us/vlos-1.1/2.6.9-vidalinux1-sources.tar.bz2
#tar xvjf 2.6.9-vidalinux1-sources.tar.bz2
#ln -s 2.6.9-vidalinux1 linux
#cd linux
#make menuconfig
burada
Devices Drivers -->
Multimedia Devices -->
<M> Video For Linux
Digital Video Broadcasting Devices --->
<M> DVB Core Support
<M> ST STV0299 based
<M> Technisat Skystar2 PCI

alnlarini <M> secip kaydedip ciktim

#make && make modules modules_install install
komutlarini uyguladim ve herhangi bir sorunla karsilasmadim. Umarim dogru yapmisimdir

kerneli derlemeden once /boot su sekilde idi
bash-2.05b# ls -al /boot
total 14522
drwxr-xr-x 4 root root 1024 Dec 28 17:58 .
drwxr-xr-x 20 root root 4096 Dec 28 18:28 ..
-rw-r--r-- 1 root root 0 Dec 21 22:45 .keep
-rw-r--r-- 1 root root 1231428 Dec 16 01:34 System.map-2.6.9-vidalinux1
-rwxr-xr-x 1 root root 1231428 Dec 16 02:21 System.map-2.6.9-vidalinux_r1
lrwxrwxrwx 1 root root 1 Dec 28 17:47 boot -> .
drwxr-xr-x 2 root root 1024 Dec 28 18:27 grub
-rw-r--r-- 1 root root 3330007 Dec 16 01:34 initrd-2.6.9-vidalinux1
-rwxr-xr-x 1 root root 3330007 Dec 16 02:21 initrd-2.6.9-vidalinux_r1.img
drwx------ 2 root root 12288 Dec 28 19:46 lost+found
-rw-r--r-- 1 root root 2826211 Dec 16 01:34 vmlinuz-2.6.9-vidalinux1
-rwxr-xr-x 1 root root 2826211 Dec 16 02:21 vmlinuz-2.6.9-vidalinux_

kerneli derledikten sonra ise su sekle donustu
bash-2.05b# ls -al /boot
total 18545
drwxr-xr-x 4 root root 1024 Dec 31 18:05 .
drwxr-xr-x 20 root root 4096 Dec 28 18:28 ..
-rw-r--r-- 1 root root 0 Dec 21 22:45 .keep
lrwxr-xr-x 1 root root 27 Dec 31 18:05 System.map -> System.map-2.6.9-vidalinux1
-rw-r--r-- 1 root root 1231428 Dec 31 18:05 System.map-2.6.9-vidalinux1
-rw-r--r-- 1 root root 1231428 Dec 16 01:34 System.map-2.6.9-vidalinux1.old
-rwxr-xr-x 1 root root 1231428 Dec 16 02:21 System.map-2.6.9-vidalinux_r1
lrwxrwxrwx 1 root root 1 Dec 28 17:47 boot -> .
lrwxr-xr-x 1 root root 23 Dec 31 18:05 config -> config-2.6.9-vidalinux1
-rw-r--r-- 1 root root 40239 Dec 31 18:05 config-2.6.9-vidalinux1
drwxr-xr-x 2 root root 1024 Dec 28 18:27 grub
-rw-r--r-- 1 root root 3330007 Dec 16 01:34 initrd-2.6.9-vidalinux1
-rwxr-xr-x 1 root root 3330007 Dec 16 02:21 initrd-2.6.9-vidalinux_r1.img
drwx------ 2 root root 12288 Dec 28 19:46 lost+found
lrwxr-xr-x 1 root root 24 Dec 31 18:05 vmlinuz -> vmlinuz-2.6.9-vidalinux1
-rw-r--r-- 1 root root 2826439 Dec 31 18:05 vmlinuz-2.6.9-vidalinux1
-rw-r--r-- 1 root root 2826211 Dec 16 01:34 vmlinuz-2.6.9-vidalinux1.old
-rwxr-xr-x 1 root root 2826211 Dec 16 02:21 vmlinuz-2.6.9-vidalinux_r1

lsmod ile baktigimda skaystar2 olarak bir seyler goruyorum
bash-2.05b# lsmod
Module Size Used by
lp 12204 0
snd_intel8x0 32676 0
snd_ac97_codec 76000 1 snd_intel8x0
snd_pcm 95752 2 snd_intel8x0,snd_ac97_codec
snd_timer 24708 1 snd_pcm
snd 54756 4 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 10248 2 snd_intel8x0,snd_pcm
skystar2 28164 0
dvb_core 83504 1 skystar2
i2c_core 23952 1 skystar2
parport_pc 31168 1
parport 40136 2 lp,parport_pc
usblp 12928 0
dm_mod 61180 0
sbp2 24456 0
ohci1394 34052 0
ohci_hcd 20868 0
uhci_hcd 32144 0
usb_storage 30208 0
usbhid 32320 0
ehci_hcd 29316 0
usbcore 115172 8 usblp,ohci_hcd,uhci_hcd,usb_storage,usbhid,ehci_
hcd

Burada kerneli yanlis derlemis olabilirmiyim ve /boot/grub/grub.conf dosyasinda herhagi bir degi$iklik yapmadim. Makineyi sadece bastan baslattım

Sonra su islemleri uyguladim

#cd /usr/local/src
#wget http://www.linuxtv.org/download/dvb/linuxtv-dvb-apps-1.1.0.tar.bz2
#tar -xvjf linuxtv-dvb-apps-1.1.0.tar.bz2
#ln -s linuxtv-dvb-apps-1.1.0 linuxtv
#cd linuxtv
#make
burada da herhangi bir sorun almadan make islemi tamamlandi

Su anda catida iki adet canak anten var LNB1 de Hotbird, LNB2 de ise Turksat var. Bu scan isleminde LNB lerin nasil secilecegini bilmiyorum ama yinede su sekilde devam ettim
#cd util/scan
#mkdir /root/.szap
#./scan dvb-s/Hotbird-13.0E | tee /root/.szap/channels.conf
scanning dvb-s/Hotbird-13.0E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:1882: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory

Burada boyle bir hata aldim. Simdi ne yapabilirm ve nerelerde hata yapiyorum
yardimlariniz icin tekrar tesekkurler
ersan

kandemir · n00b Joined: 26 Sep 2004 Posts: 23

ersan · n00b Joined: 30 Dec 2004 Posts: 31

Merhabalar
Galiba skystar2 modul olarak yuklenmiyor. Soylediklerinizi yaptim ve su ciktilari aldim

#modprobe skystar2
#dmesg | tail
bootsplash: status on console 3 changed to on
bootsplash 3.1.4-2004/02/19-spock-0.1: looking for picture.... found (1024x768, 241339 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.4-2004/02/19-spock-0.1: looking for picture.... found (1024x768, 241339 bytes, v3).
bootsplash: status on console 5 changed to on
mtrr: 0xd0000000,0x4000000 overlaps existing 0xd0000000,0x200000
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered

# ./scan dvb-s/Hotbird-13.0E | tee /root/.szap/channels.conf
scanning dvb-s/Hotbird-13.0E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:1882: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory

Birde /etc/modules.autoload/kernel-2.6 seklinde bir dosya bende yok fakat su dosyalar var ve icerikleri su sekilde

#ls -al /etc/modules.autoload.d
total 44
drwxr-xr-x 2 root root 4096 Dec 21 22:45 .
drwxr-xr-x 62 root root 4096 Jan 1 16:00 ..
-rw-r--r-- 1 root root 470 Dec 21 22:45 ._cfg0000_kernel-2.6
-rw-r--r-- 1 root root 0 Dec 21 22:45 .keep
-rw-r--r-- 1 root root 571 Dec 21 22:45 kernel-2.4
-rw-r--r-- 1 root root 476 Dec 20 04:45 kernel-2.6

#ls -al /etc/modules.d
total 60
drwxr-xr-x 2 root root 4096 Dec 31 11:56 .
drwxr-xr-x 62 root root 4096 Jan 1 16:00 ..
-rw-r--r-- 1 root root 0 Dec 21 22:45 .keep
-rw-r--r-- 1 root root 1310 Dec 21 22:45 aliases
-rw-r--r-- 1 root root 1162 Dec 28 17:57 alsa
-rw-r--r-- 1 root root 0 Dec 28 17:56 anaconda_detected
-rw-r--r-- 1 root root 122 Dec 21 22:45 i386
-rw-r--r-- 1 root root 268 Dec 28 18:25 ppp
-rw-r--r-- 1 root root 36 Dec 31 11:56 svgalib

Tesekkurler
ersan

kandemir · n00b Joined: 26 Sep 2004 Posts: 23

togan · Posted: Sun Jan 02, 2005 12:48 am Post subject: skystart2

Selam;

ersan · n00b Joined: 30 Dec 2004 Posts: 31

Merhabalar

Sistemimi aslinda en bastan belirtmeliydim.
Vidalinux-1.1
hda 20 Gb (hda1 winxp- had5 bos - hda6 /boot - hda7 vidalinux-1.1 /resiserfs - hda8 /swap)
hdb 8 Gb (hdb1 /boot - hdb2 /ext3 - hdb3 /swap)
Burada bütün denemelerimi hdb2 de kurulu olan vidalinux-1.1 icewm altinda yapiyorum
P4-1.8Ghz intel
256Mb ddr ram
64 Mb Mx440-se Geforce ekran karti
Gigabayte anakart
Skystar2 PCI dijital tv kartı
52xcd rom
52x32x52 cd-rw
17" Lg ekran

Dediklerinizi su sekilde uyguladim

#cd /usr/src/linux
#make menuconfig
Device Drivers --->
Multimedia devices --->
<M> Video For Linux
Video For Linux --->
Radio Adapters --->
Digital Video Broadcasting Devices --->
[*] DVB For Linux
<M> DVB Core Support
DVB-S (satellite) frontends
<M> ST STV0299 based
<M> Connexant CX24110 based
<M> Grundig 29504-491 based
<M> Zarlink MT312 based
<M> VLSI VES1893 or VES1993 based
<M> Grundig 29504-401 base
<M> Technisat Skystar2 PCI

#make && make modules modules_install install

#nano /etc/moules.autoload.d/kernel-2.6 dosyasına

saa7146
saa7146_vv

satirlari eklendi ve sistemi bastan baslattim

Sistem acilirken
Failed to load saa7146
Failed to load saa7146_vv
seklinde hata verdi bende etc/moules.autoload.d/kernel-2.6 dosyasina ekledigim satirlari geri kaldirdim.

#emerge -s udev
Searching...
[ Results for search key : udev ]
[ Applications found : 2 ]

* app-text/uudeview
Latest version available: 0.5.20
Latest version installed: [ Not Installed ]
Size of downloaded files: 255 kB
Homepage: http://www.fpx.de/fp/Software/UUDeview/
Description: uu, xx, base64, binhex decoder
License: GPL-2

* sys-fs/udev
Latest version available: 045
Latest version installed: 045
Size of downloaded files: 372 kB
Homepage: http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html
Description: Linux dynamic and persistent device naming support (aka userspace devfs)
License: GPL-2

#lsmod
Module Size Used by
snd_pcm_oss 53800 0
snd_mixer_oss 20224 1 snd_pcm_oss
lp 12204 0
snd_intel8x0 32676 0
snd_ac97_codec 76000 1 snd_intel8x0
snd_pcm 95752 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 24708 1 snd_pcm
snd 54756 6 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 10248 2 snd_intel8x0,snd_pcm
skystar2 28164 0
dvb_core 83504 1 skystar2
i2c_core 23952 1 skystar2
parport_pc 31168 1
parport 40136 2 lp,parport_pc
usblp 12928 0
usbcore 115172 2 usblp

#dmesg | grep skystar2
drivers/media/dvb/b2c2/skystar2.c: FlexCopII(rev.130) chip found
drivers/media/dvb/b2c2/skystar2.c: the chip has 6 hardware filters

#dmesg | grep dvb
drivers/media/dvb/b2c2/skystar2.c: FlexCopII(rev.130) chip found
drivers/media/dvb/b2c2/skystar2.c: the chip has 6 hardware filters

#dmesg | grep video
Bu komutta herhangi bir cikti vermiyor

#ls -l /dev/dvb/adapter0
ls: /dev/dvb/adapter0: No such file or directory

Komut ciktilari bu sekilde bir de dikkatimi yeni cekti sistem kapanirken su sekilde bir hata veriyor (hem hda daki vidalinux da hemde hdb deki vidalinux da)
Stopping gdm (OK)
Error stopping gdm

Yardimlarinizla umarim bu sorunu asacagim.
Tekrar tesekkurler
ersan

togan · Posted: Sun Jan 02, 2005 12:14 pm Post subject:

Selam

togan · Posted: Sun Jan 02, 2005 12:39 pm Post subject: skystar2

Selam,

Þimdi gelelim dev sorununa bunlarý yaparsan /dev/dvb deki sorun ortadan kalkar.
udev ile çalýþan gentoo da udev rules eklenmek zorunda

ersan · n00b Joined: 30 Dec 2004 Posts: 31

Merhabalar

#make menuconfig
Device Drivers --->
Multimedia devices --->
<M> Video For Linux -->> bu kesinlikle [*] olacak
Video For Linux --->
Radio Adapters --->
Digital Video Broadcasting Devices --->
[*] DVB For Linux
<M> DVB Core Support
DVB-S (satellite) frontends
<M> ST STV0299 based
<M> Connexant CX24110 based
<M> Grundig 29504-491 based
<M> Zarlink MT312 based
<M> VLSI VES1893 or VES1993 based
<M> Grundig 29504-401 base
<M> Technisat Skystar2 PCI
Malasef bunlarin hepsini <M> olarak biraktim <*> isleminde derlemede error veriyor

#cd /usr/local/src
#wget http://www.kolkola.org/gentoo/dvb-udev.tar.gz
#tar -xvzf dvb-udev.tar.gz
#cd dvb-udev
#./MAKEDEV-DVB.sh && cp 20-local.rules /etc/udev/rules.d/20-local.rules && cp dvb.sh /etc/udev/scripts/dvb.sh && cp 20-local.permissions /etc/udev/permissions.d/20-local.permissions

dediklerinizi uyguladim ve su ciktilari aldim

Creating DVB devices in /dev/dvb/adapter0
chown: `root.video' syntax is obsolete; use `:' since this will be removed in the future
Creating DVB devices in /dev/dvb/adapter1
chown: `root.video' syntax is obsolete; use `:' since this will be removed in the future
Creating DVB devices in /dev/dvb/adapter2
chown: `root.video' syntax is obsolete; use `:' since this will be removed in the future
Creating DVB devices in /dev/dvb/adapter3
chown: `root.video' syntax is obsolete; use `:' since this will be removed in the future

bash-2.05b# ls -l /dev/dvb/adapter0
total 0
crw-rw-r-- 1 root video 212, 1 Jan 2 15:25 audio0
crw-rw-r-- 1 root video 212, 6 Jan 2 15:25 ca0
crw-rw-r-- 1 root video 212, 4 Jan 2 15:25 demux0
crw-rw-r-- 1 root video 212, 5 Jan 2 15:25 dvr0
crw-rw-r-- 1 root video 212, 3 Jan 2 15:25 frontend0
crw-rw-r-- 1 root video 212, 7 Jan 2 15:25 net0
crw-rw-r-- 1 root video 212, 8 Jan 2 15:25 osd0
crw-rw-r-- 1 root video 212, 0 Jan 2 15:25 video0

# cd /usr/local/src/linuxtv/util/scan
#modprobe skystar2
#./scan dvb-s/Hotbird-13.0E | tee /root/.szap/channels.conf
scanning dvb-s/Hotbird-13.0E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:1882: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 19 No such device

Burada yine ayni hatayi aldim

acaba winden kalma bir aliskanlikla butun sistemi bastan mý kursam?

tesekkurler
ersan

togan · Posted: Sun Jan 02, 2005 1:45 pm Post subject: skystar2

selam

evet tar.gz paketinde bir hata buldum ve düzelttim.
son yazdýðýmý yeniden baþtan baþlayarak yapýn ve reboot olmasý lazým.

ersan · n00b Joined: 30 Dec 2004 Posts: 31

lutfen altakini dikkate alin

ersan · n00b Joined: 30 Dec 2004 Posts: 31

Afedersiniz onceki yaziyi yanlis gonderdim

#cd /usr/local/src
#wget http://www.kolkola.org/gentoo/dvb-udev.tar.gz
#tar -xvzf dvb-udev.tar.gz
#cd dvb-udev
#./MAKEDEV-DVB.sh
Creating DVB devices in /dev/dvb/adapter0
chown: `root.video' syntax is obsolete; use `:' since this will be removed in the future
Creating DVB devices in /dev/dvb/adapter1
chown: `root.video' syntax is obsolete; use `:' since this will be removed in the future
Creating DVB devices in /dev/dvb/adapter2
chown: `root.video' syntax is obsolete; use `:' since this will be removed in the future
Creating DVB devices in /dev/dvb/adapter3
chown: `root.video' syntax is obsolete; use `:' since this will be removed in the future

#cp 20-local.rules /etc/udev/rules.d/20-local.rules && cp dvb.sh /etc/udev/scripts/dvb.sh && cp 20-lo
cal.permissions /etc/udev/permissions.d/20-local.permissions

#ls -l /dev/dvb/adapter0
total 0
crw-rw-r-- 1 root video 212, 1 Jan 2 16:08 audio0
crw-rw-r-- 1 root video 212, 6 Jan 2 16:08 ca0
crw-rw-r-- 1 root video 212, 4 Jan 2 16:08 demux0
crw-rw-r-- 1 root video 212, 5 Jan 2 16:08 dvr0
crw-rw-r-- 1 root video 212, 3 Jan 2 16:08 frontend0
crw-rw-r-- 1 root video 212, 7 Jan 2 16:08 net0
crw-rw-r-- 1 root video 212, 8 Jan 2 16:08 osd0
crw-rw-r-- 1 root video 212, 0 Jan 2 16:08 video0

#cd /usr/local/src/linuxtv/util/scan
#modprobe skystar2
#./scan dvb-s/Hotbird-13.0E | tee /root/.szap/channels.conf
scanning dvb-s/Hotbird-13.0E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:1882: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 19 No such device

Malasef yine ayni hatayı aliyorum

Brda onceden lsmod komutunda "dvb_core 83504 1 skystar2 " olarak vardi simdi ise su sekilde gozukuyor

# lsmod
Module Size Used by
lp 12204 0
snd_intel8x0 32676 0
snd_ac97_codec 76000 1 snd_intel8x0
snd_pcm 95752 2 snd_intel8x0,snd_ac97_codec
snd_timer 24708 1 snd_pcm
snd 54756 4 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 10248 2 snd_intel8x0,snd_pcm
skystar2 28164 0
i2c_core 23952 1 skystar2
parport_pc 31168 1
parport 40136 2 lp,parport_pc
usblp 12928 0
usbcore 115172 2 usblp

Ayrica bir de su sekilde deneme yapayim dedim
http://www.angelfire.com/linux/mattdvb/channels.conf.hotbird
adresindeki "channels.conf.hotbird" dosyasini
/root/.szap/channels.conf olarak kaydettim
#cd /usr/local/src/linuxtv/util/szap
#./szap -l
......
1104 RIRE
1105 MEDYA TV
1106 ABsat PROMO
1107 ABsat test Radio
1108 MMOV_PF11
1109 MMOV_PF12
1110 MMOV_PF13
1111 MMOV_PF14
1112 MMOV_PF15
1113 MMOV_PF16
1114 sport ch.
1115 cfn
1116 duel
1117 comedy
1118 fox kids
1119 nat geo
1120 roma ch

Burada bir suru kanal ismi cikti

#./szap -n 982 -r

reading channels from file '/root/.szap/channels.conf'
zapping to 982 'CNNI':
sat 0, frequency = 12597 MHz V, symbolrate 27500000, vpid = 0x00a8, apid = 0x0070
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
opening frontend failed: No such device

Seklinde bir hata verdi

togan · Posted: Sun Jan 02, 2005 2:49 pm Post subject: skystar2

/etc/modules.autoload.d/kernel.2.6 içine

ersan · n00b Joined: 30 Dec 2004 Posts: 31

Merhabalar

Sonunda oldu mutluluktan ucabilirm

Fakat bir kac kucuk problemim var
Dediklerinizi su sekilde yaptim

#nano /etc/modules.autoload.d/kernel-2.
stv0299
dvb_core
dvb
skystar2
video_buf
videodev
v4l1_compat
v4l2_common

Ekledikten ve reboot ettim fakat acilista
Faild to load dvb_core
Faild to load dvb
Faild to load videodev
Faild to load v411...
Faild to load v412...

seklinde hata verdi

e aldim
#cd /usr/local/src/linuxtv/util/scan
#./scan dvb-s/Hotbird-13.0E | tee /root/.szap/channels.conf
Burada kanallari tarayip bitirdi

#cd ..
#cd szap
#./szap -l
Burada da kanallari listeledi

#./szap -n xxx -r

xxx yazan yer listelenen kanallardan birinin numarasini yazdim yazdim
baska bir konsol acip

#xine stdin://mpeg2 < /dev/dvb/adapter0/dvr0

komutunu verdim fakat ne yaptiysam hic bir kanal acilmadi
bu sefer sunu denedim

#cp /root/.szap/channels.conf /root/.xine/channels.conf

xine yi calistirdim ve ta ta ta bir kanal geldi ve ilk goruntumu aldim
Burada xine de nasil kanal degistirecegimi bulamadim

Simdiye kadar yardim edip sabirlarinizdan dolayi cok tesekkur ederim

ersan

togan · Posted: Sun Jan 02, 2005 3:44 pm Post subject:

xine kontrol arayüzünde solda enüst düðme ..

Arýzalý görünen moduller kernelde gömülü olmalý /etc/modules.autoload.d/kernel-2.6 daki listeden hata bildirenlerii silin.

dvb_core
dvb
výdeodev
v4l1_compat
v4l2_common bunlarý silin

sonunda çalýþmasý uðraþýlara deðer....

xine için kullanýcýyada ekleyebilirsiniz.

cp /root/.szap/channels.conf /home/kullanýcý/.xine/channels.conf

bu þekilde kullanýcý altýnda xine açýlýp, xine kontrol arayüzünde dvb tuþlayýp görüntü alabilirsiniz.
ve sol üst de kanal listesini açan tuþa basýn ve kanal deðiþtirin. Direk istediðiniz kanalý týklayýn tamamdýr...

Haaa unutmadan artýk szap çlýþtýrmanýza gerek yok xine artýk onu kendi kontrol ediyor.

ve iyi eðlenceler

Kolay gelsin
_________________
Gentoo 2006.1 stage1 MSI nforce 4 Athlon64 Nvidia PCI Express
Raptor74 GB + 200 GB X 2 SATA

ersan · n00b Joined: 30 Dec 2004 Posts: 31

Merhabalar
Biliyorum biraz cok oluyorum ama bu isi tamamiyle bitirmek istiyorum

Sol ust kosede "playlist" diye bir bolum var onu actigimda bir pencere geliyor
Bu pencerede "Load" bolumunden
/root/.szap/channels.conf
/root/.xine/channels.conf
dosyalarindan birini secip "Load" dedigimde kanal isimleri geliyor
Buradan herhangi bir kanal ismi sectigimde su sekilde iki tane ayri pencerede hata aliyorum ve acmiyor

---------
-xine engine error-
There is input plugin available to handle 'ARABIC/5 RADI:12437:h:0:27500:0:91:7932'.
Maybe MRL syntax is wrong or file/stream source doesn't exist.
--------------

---------
The specified file or mrl is not found. Please check it twice. (ARABIC/5 RADI:12437:h:0:27500:0:91:7932)
-----------

Fakat xine nin kontrol penceresindeki sag tarafta bulunan "Play next chapter or mrl" tusu ile bir sonraki kanala gecebiliyorum.

Birde /root/.xine/xine-ui_old_playlist.tox diye bir dosya var ve icerigi su sekilde
# toxine playlist

entry {
identifier = dvb://;
mrl = dvb://;
};
# END

Acaba burada mi bir degi$iklik yapmam gerekiyor

Tesekkurler
ersan

togan · Posted: Sun Jan 02, 2005 5:14 pm Post subject:

selam

Bundan sonrasýna yorum yapamayacaðým. Kullanýcý olarak login olup deneyin demekten baþka, birde þunu söyleyebilrim gxine kurarak ve channels.conf /home/kullanýcý/.gxine / altýna kopyalayarak deneyin..

kolay gelsin
_________________
Gentoo 2006.1 stage1 MSI nforce 4 Athlon64 Nvidia PCI Express
Raptor74 GB + 200 GB X 2 SATA

rakdere · Posted: Tue Jan 04, 2005 8:27 am Post subject:

merhaba Togan

Gentooda tvkarti kurmaya ben de calisiyorum yeniden.
Terrateck dvb-s kartim var su an.
Kernel 2.6.10 kullaniyorum.
Kernel de dvb-s ile ilgili herseyi secili yaptim.

Simdi nereden baslayayim?

selamlar
_________________
rafet

ersan · n00b Joined: 30 Dec 2004 Posts: 31

Tekrar merhabalar

Vidalinux-1.1 i simdi ilk hardiskime kurdum ve skystar2 pci dijital tv kartini onceki gibi tanittim fakat yine goruntu alamiyorum. Kurulumu su sekilde yaptim

#cd /usr/src/
#wget http://vidalinux.05t.us/vlos-1.1/2.6.9-vidalinux1-sources.tar.bz2
#tar xvjf 2.6.9-vidalinux1-sources.tar.bz2
#ln -s 2.6.9-vidalinux1 linux
#cd /usr/local/src
#make menuconfig
Device Drivers --->
Multimedia devices --->
<M> Video For Linux
Video For Linux --->
Radio Adapters --->
Digital Video Broadcasting Devices --->
[*] DVB For Linux
<M> DVB Core Support
DVB-S (satellite) frontends
<M> ST STV0299 based
<M> Connexant CX24110 based
<M> Grundig 29504-491 based
<M> Zarlink MT312 based
<M> VLSI VES1893 or VES1993 based
<M> Grundig 29504-401 base
<M> Technisat Skystar2 PCI

#make && make modules modules_install install

Bu islemlerden sonra makineyi tekrar bastan baslattim.

#emerge xine
#emerge mplayer
#emerge gxine

#cd /usr/local/src
#wget http://www.linuxtv.org/dvb/firmware/dvb-ttpci-01.fw-261c
#mv dvb-ttpci-01.fw-261c dvb-ttpci-01.fw
#cp dvb-ttpci-01.fw /usr/lib/hotplug/firmware/dvb-ttpci-01.fw

#cd /usr/local/src
#wget http://www.kolkola.org/gentoo/dvb-udev.tar.gz
#tar -xvzf dvb-udev.tar.gz
#cd dvb-udev
#./MAKEDEV-DVB.sh
#cp 20-local.rules /etc/udev/rules.d/20-local.rules && cp dvb.sh /etc/udev/scripts/dvb.sh && cp 20-local.permissions /etc/udev/permissions.d/20-local.permissions

#nano /etc/modules.autoload.d/kernel-2.6 dosyasýna
stv0299
evdev
skystar2
video_buf

Bu islemlerden sonra makineyi tekrar bastan baslattim.

# lsmod
Module Size Used by
snd_pcm_oss 53800 0
snd_mixer_oss 20224 1 snd_pcm_oss
lp 12204 0
snd_intel8x0 32676 0
snd_ac97_codec 76000 1 snd_intel8x0
snd_pcm 95752 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 24708 1 snd_pcm
snd 54756 6 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 10248 2 snd_intel8x0,snd_pcm
parport_pc 31168 1
parport 40136 2 lp,parport_pc
evdev 9856 0
video_buf 21380 0
skystar2 28164 0
stv0299 18568 0
i2c_core 23952 2 skystar2,stv0299
dvb_core 83504 2 skystar2,stv0299
usblp 12928 0
dm_mod 61180 0
sbp2 24456 0
ohci1394 34052 0
ohci_hcd 20868 0
uhci_hcd 32144 0
usb_storage 30208 0
usbhid 32320 0
ehci_hcd 29316 0
usbcore 115172 8 usblp,ohci_hcd,uhci_hcd,usb_storage,usbhid,ehci_hcd

# lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645DX Host & Memory & AGP Controller (rev 01)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 25)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
0000:00:0d.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 01)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3)

#emerge -s dvb
Searching...
[ Results for search key : dvb ]
[ Applications found : 3 ]

* media-libs/libdvb
Latest version available: 0.5.0-r1
Latest version installed: [ Not Installed ]
Size of downloaded files: 249 kB
Homepage: http://www.metzlerbros.org/dvb/
Description: libdvb package with added CAM library and libdvbmpegtools as well as dvb-mpegtools
License: GPL-2

* media-libs/libdvbpsi
Latest version available: 0.1.3
Latest version installed: [ Not Installed ]
Size of downloaded files: 187 kB
Homepage: http://www.videolan.org/libdvbpsi
Description: library for MPEG TS/DVB PSI tables decoding and generation
License: GPL-2

* media-tv/linuxtv-dvb
Latest version available: 1.0.1
Latest version installed: [ Not Installed ]
Size of downloaded files: 660 kB
Homepage: http://www.linuxtv.org
Description: Standalone DVB driver for Linux kernel 2.4.x
License: GPL-2

# emerge -s udev
Searching...
[ Results for search key : udev ]
[ Applications found : 2 ]

* app-text/uudeview
Latest version available: 0.5.20
Latest version installed: [ Not Installed ]
Size of downloaded files: 255 kB
Homepage: http://www.fpx.de/fp/Software/UUDeview/
Description: uu, xx, base64, binhex decoder
License: GPL-2

* sys-fs/udev
Latest version available: 045
Latest version installed: 045
Size of downloaded files: 372 kB
Homepage: http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html
Description: Linux dynamic and persistent device naming support (aka userspace devfs)
License: GPL-2

# dmesg | grep skystar2
drivers/media/dvb/b2c2/skystar2.c: FlexCopII(rev.130) chip found
drivers/media/dvb/b2c2/skystar2.c: the chip has 6 hardware filters

# dmesg | grep dvb
drivers/media/dvb/b2c2/skystar2.c: FlexCopII(rev.130) chip found
drivers/media/dvb/b2c2/skystar2.c: the chip has 6 hardware filters

#dmesg | grep video
Kernel command line: gentoo=nodevfs udev root=/dev/ram0 init=/linuxrc real_root=/dev/hda7 vga=0x317 video=vesa:ywrap,mtrr splash=silent

(Burasinin normal olup olmadigini bilmiyorum. Diger harddiskimdeki bu komut soyle bir cikti veriyor
"Linux video capture interface: v1.00")

# ls -l /dev/dvb/adapter0
total 0
crw-rw-r-- 1 root video 212, 1 Jan 3 22:58 audio0
crw-rw-r-- 1 root video 212, 6 Jan 3 22:58 ca0
crw-rw-r-- 1 root video 212, 4 Jan 3 22:58 demux0
crw-rw-r-- 1 root video 212, 5 Jan 3 22:58 dvr0
crw-rw-r-- 1 root video 212, 3 Jan 3 22:58 frontend0
crw-rw-r-- 1 root video 212, 7 Jan 3 22:58 net0
crw-rw-r-- 1 root video 212, 8 Jan 3 22:58 osd0
crw-rw-r-- 1 root video 212, 0 Jan 3 22:58 video0

#cd /usr/local/src
#wget http://www.linuxtv.org/download/dvb/linuxtv-dvb-apps-1.1.0.tar.bz2
#tar -xvjf linuxtv-dvb-apps-1.1.0.tar.bz2
#ln -s linuxtv-dvb-apps-1.1.0 linuxtv
#cd linuxtv
#make

cat: CVS/Root: No such file or directory
make -C util
make[1]: Entering directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util'
make -C lib
make[2]: Entering directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util/lib'
make[2]: `lnb.o' is up to date.
make[2]: Leaving directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util/lib'
make -C szap
make[2]: Entering directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util/szap'

--------------------------------------------------------------------------------
please copy an appropriate channels.conf-XXX channel list for DVB-S/C/T

to ~/.szap/channels.conf
~/.czap/channels.conf
~/.tzap/channels.conf

and then call ./szap for DVB-S, ./czap for DVB-C or ./tzap for DVB-T
--------------------------------------------------------------------------------

make[2]: Leaving directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util/szap'
make -C scan
make[2]: Entering directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util/scan'
make[2]: `scan' is up to date.
make[2]: Leaving directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util/scan'
make -C dvbnet
make[2]: Entering directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util/dvbnet'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util/dvbnet'
make -C dvbdate
make[2]: Entering directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util/dvbdate'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util/dvbdate'
make -C dvbtraffic
make[2]: Entering directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util/dvbtraffic'
make[2]: `dvbtraffic' is up to date.
make[2]: Leaving directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util/dvbtraffic'
make -C av7110_loadkeys
make[2]: Entering directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util/av7110_loadkeys'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util/av7110_loadkeys'
make[1]: Nothing to be done for `FORCE'.
make[1]: Leaving directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/util'
make -C test
make[1]: Entering directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/test'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/src/linuxtv-dvb-apps-1.1.0/test'

(kurulum bu sekilde bitirdi)

#cd util/scan
#mkdir /root/.szap
#./scan dvb-s/Hotbird-13.0E | tee /root/.szap/channels.conf
(Burada da kanallari normal bir sekilde buldu)

#cd ../szap
#./szap -l

#./szap -n 1332 -r
Burada da normal olarak sinyal geliyor

#xine stdin://mpeg2 < /dev/dvb/adapter0/dvr0
#gxine stdin://mpeg2 < /dev/dvb/adapter0/dvr0
#mplayer - < /dev/dvb/adapter0/dvr0
(bu komutlarin hic biri ile goruntu gelmiyor)

#cp /root/.szap/channels.conf /root/.xine
#cp /root/.szap/channels.conf /root/.gine

# xine
This is xine (X11 gui) - a free video player v0.99.3.
(c) 2000-2004 The xine Team.
xiTK received SIGSEGV signal, RIP.
Aborted

Program calistiktan sonra butun kanallari gorebiliyorum fakat birini acmaya calistigimda goruntu gelmiyor xine kilitleniyor ve yaklasik 1 dakika sonra yukaridaki ciktiyi vererek tamamen kendiliginden kapaniyor

Acaba atladigim bir yer mi var?

Tesekkurler
ersan