chrroessner
Apprentice
Joined: 02 Dec 2003
Posts: 156
Location: Germany
|
 Posted: Sun Jan 16, 2005 9:45 am Post subject: Intel PRO wireless 2100 Mini PCI 3B with ndiswrapper |
 |
|
Hello,
I installed ndiswrapper 1.0rc2 and I can use my Netgear WG511 with this driver. I also have a builtin card the ipw2100 and I would also like to use ndiswrapper to work with this card.
I have installed both cards with ndiswrapper -i foo.inf, but the ipw2100 can not be started, because there too many conf files in /etc/ndiswrapper/w70n51
| Code: |
lrwxrwxrwx 1 root root 48 16. Jan 10:38 8086:1043.conf -> /etc/ndiswrapper/w70n51/8086:1043:8086:2520.conf
-rw-r--r-- 1 root root 903 16. Jan 10:38 8086:1043:8086:25A0.conf
-rw-r--r-- 1 root root 903 16. Jan 10:38 8086:1043:8086:252B.conf
-rw-r--r-- 1 root root 903 16. Jan 10:38 8086:1043:8086:252C.conf
-rw-r--r-- 1 root root 903 16. Jan 10:38 8086:1043:8086:252D.conf
-rw-r--r-- 1 root root 905 16. Jan 10:38 8086:1043:8086:2520.conf
-rw-r--r-- 1 root root 905 16. Jan 10:38 8086:1043:8086:2521.conf
-rw-r--r-- 1 root root 903 16. Jan 10:38 8086:1043:8086:2522.conf
-rw-r--r-- 1 root root 903 16. Jan 10:38 8086:1043:8086:2523.conf
-rw-r--r-- 1 root root 905 16. Jan 10:38 8086:1043:8086:2524.conf
-rw-r--r-- 1 root root 905 16. Jan 10:38 8086:1043:8086:2525.conf
-rw-r--r-- 1 root root 903 16. Jan 10:38 8086:1043:8086:2527.conf
-rw-r--r-- 1 root root 903 16. Jan 10:38 8086:1043:8086:2528.conf
-rw-r--r-- 1 root root 903 16. Jan 10:38 8086:1043:8086:2529.conf
-rw-r--r-- 1 root root 948 16. Jan 10:38 8086:1043:8086:2550.conf
-rw-r--r-- 1 root root 946 16. Jan 10:38 8086:1043:8086:2551.conf
-rw-r--r-- 1 root root 946 16. Jan 10:38 8086:1043:8086:2553.conf
-rw-r--r-- 1 root root 946 16. Jan 10:38 8086:1043:8086:2554.conf
-rw-r--r-- 1 root root 946 16. Jan 10:38 8086:1043:8086:2555.conf
-rw-r--r-- 1 root root 918 16. Jan 10:38 8086:1043:8086:2560.conf
-rw-r--r-- 1 root root 916 16. Jan 10:38 8086:1043:8086:2561.conf
-rw-r--r-- 1 root root 918 16. Jan 10:38 8086:1043:8086:2562.conf
-rw-r--r-- 1 root root 918 16. Jan 10:38 8086:1043:8086:2563.conf
-rw-r--r-- 1 root root 916 16. Jan 10:38 8086:1043:8086:2565.conf
-rw-r--r-- 1 root root 916 16. Jan 10:38 8086:1043:8086:2566.conf
-rw-r--r-- 1 root root 916 16. Jan 10:38 8086:1043:8086:2567.conf
-rw-r--r-- 1 root root 903 16. Jan 10:38 8086:1043:8086:2570.conf
-rw-r--r-- 1 root root 936 16. Jan 10:38 8086:1043:8086:2580.conf
-rw-r--r-- 1 root root 934 16. Jan 10:38 8086:1043:8086:2581.conf
-rw-r--r-- 1 root root 936 16. Jan 10:38 8086:1043:8086:2582.conf
-rw-r--r-- 1 root root 936 16. Jan 10:38 8086:1043:8086:2583.conf
-rw-r--r-- 1 root root 934 16. Jan 10:38 8086:1043:8086:2585.conf
-rw-r--r-- 1 root root 934 16. Jan 10:38 8086:1043:8086:2586.conf
-rw-r--r-- 1 root root 934 16. Jan 10:38 8086:1043:8086:2587.conf
-rw-r--r-- 1 root root 920 16. Jan 10:38 8086:1043:8086:2590.conf
-rw-r--r-- 1 root root 918 16. Jan 10:38 8086:1043:8086:2591.conf
-rw-r--r-- 1 root root 920 16. Jan 10:38 8086:1043:8086:2592.conf
-rw-r--r-- 1 root root 918 16. Jan 10:38 8086:1043:8086:2593.conf
-rw-r--r-- 1 root root 918 16. Jan 10:38 8086:1043:8086:2596.conf
-rw-r--r-- 1 root root 918 16. Jan 10:38 8086:1043:8086:2598.conf
-r-xr-xr-x 1 root root 80581 16. Jan 10:38 w70n51.inf
-rw-r--r-- 1 root root 2370688 16. Jan 10:38 w70n51.sys
|
Here is my lspci -v and lspci -n:
| Code: |
0000:02:04.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
Subsystem: Intel Corp. MIM2000/Centrino
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at d0214000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
0000:02:04.0 Class 0280: 8086:1043 (rev 04)
|
Which one do I need here?
I do not like the ipw2100.sf.net driver, because the link is unstable and I can not modprobe the driver at startup, because the card is always turned on. It does not support the RF switch (The rf switch project has no drivers for my MaxData 8000X pro).
I remember I had the ndiswrapper working once with this card and the RF switch worked like a charme.
Please, can somebody help me with this?
Thanks in advance
Christian |
|
Networking & Security
