| View previous topic :: View next topic |
| Author |
Message |
kaylord
n00b
Joined: 23 Nov 2004
Posts: 24
Location: Milano
|
 Posted: Sat Jan 22, 2005 1:04 pm Post subject: Niubbo, ATI drivers e stranezze |
 |
|
Ciao a tutti! 
Ho provato per la prima volta a installare gli ATI drivers seguendo un pò di howto trovati in rete e seguendo le indicazioni riportate sul post inerente l'uscita dei nuovi driver. Ho una Radeon 9600 xt, e incredibilmente dopo l'installazione dei driver la macchina é ripartita senza problemi (Miracolo, non ho fatto grossi danni allora!  ).
Ho generato con il glrxconfig un file di configurazione per Xfree (io uso Xorg), quindi ho modificato a mano lo stesso in riferimento al mio precedente file xorg.conf funzionante.
Il fatto è che volendo verificare un pò di cose ho provato a lanciare glxinfo da console, ottenendo come risultato un bel reboot di X e trovandomi quindi di nuovo di fronte alla schermata di login delle kde....
Qualcuno ha idee su cosa possa essere accaduto?!? Tenete conto che son nooby ma se servono log oppure file di configurazione da postare ditemi voi, se son capace lo faccio! 
Per ora grazie per le dritte che mi vorrete dare, saluti!
_________________
Legge di Hofstaedter (ricorsiva):
Tutto richiede più tempo di quanto stimato, anche considerando la Legge di Hofstaedter.
Douglas R. Hofstaedter |
|
| Back to top |
|
 |
Thundah
Guru
Joined: 08 Feb 2004
Posts: 477
Location: Switzerland
|
| Posted: Sat Jan 22, 2005 1:29 pm Post subject: |
|
|
Prova a guardare /var/log/Xorg....
Magari ti da gia problemi d'avvio del server X, cmq che versione di xorg hai? Mi era capitato che si stincasse il pc
Mauro |
|
| Back to top |
|
|
kaylord
n00b
Joined: 23 Nov 2004
Posts: 24
Location: Milano
|
| Posted: Sat Jan 22, 2005 1:41 pm Post subject: |
|
|
| Thundah wrote: | Prova a guardare /var/log/Xorg....
Magari ti da gia problemi d'avvio del server X, cmq che versione di xorg hai? Mi era capitato che si stincasse il pc
|
Ciao Mauro, grazie per l'attenzione. La versione di Xorg è la 6.8, ho guardato il file di log di xorg e non ho trovato errori (giusto un paio di warnings) ma non son per nulla sgamato quindi riporto il testo, scusatemi per la lunghezza del post!
| Code: |
X Window System Version 6.8.0
Release Date: 8 September 2004
X Protocol Version 11, Revision 0, Release 6.8
Build Operating System: Linux 2.6.9-gentoo-r4 i686 [ELF]
Current Operating System: Linux genteoo 2.6.9-gentoo-r4 #1 Thu Nov 18 23:16:31 GMT 2004 i686
Build Date: 19 November 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 22 13:55:03 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "dellp991"
(**) | |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x800000b0, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2578 card 1462,7580 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2579 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 8086,257b card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24d2 card 1462,7580 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24d4 card 1462,7580 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24d7 card 1462,7580 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,24de card 1462,7580 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24dd card 1462,7580 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24db card 1462,7580 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24d3 card 1462,7580 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24d5 card 1462,7580 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4152 card 174b,7c29 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4172 card 174b,7c28 rev 00 class 03,80,00 hdr 00
(II) PCI: 02:01:0: chip 8086,1019 card 1462,758c rev 00 class 02,00,00 hdr 00
(II) PCI: 03:01:0: chip 125d,1988 card 125d,1988 rev 10 class 04,01,00 hdr 00
(II) PCI: 03:09:0: chip 1106,3044 card 1462,758d rev 46 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000d (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xff700000 - 0xff7fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x9ff00000 - 0xdfefffff (0x40000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:3:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[1] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[2] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[3] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xff800000 - 0xff8fffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xff900000 - 0xff9fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc RV350 AR [Radeon 9600] rev 0, Mem @ 0xc0000000/28, 0xff7f0000/16, I/O @ 0xa800/8, BIOS @ 0xff7c0000/17
(--) PCI: (1:0:1) ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary) rev 0, Mem @ 0xb0000000/28, 0xff7e0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xefffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xff9fe800 - 0xff9fefff (0x800) MX[B]
[1] -1 0 0xff8e0000 - 0xff8fffff (0x20000) MX[B]
[2] -1 0 0xffaff900 - 0xffaff9ff (0x100) MX[B]
[3] -1 0 0xffaffa00 - 0xffaffbff (0x200) MX[B]
[4] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[5] -1 0 0xffaffc00 - 0xffafffff (0x400) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xff7e0000 - 0xff7effff (0x10000) MX[B](B)
[8] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[9] -1 0 0xff7c0000 - 0xff7dffff (0x20000) MX[B](B)
[10] -1 0 0xff7f0000 - 0xff7fffff (0x10000) MX[B](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[12] -1 0 0x0000c800 - 0x0000c87f (0x80) IX[B]
[13] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[14] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[15] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[16] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[17] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[18] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[19] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[20] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[21] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[22] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[23] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xff9fe800 - 0xff9fefff (0x800) MX[B]
[1] -1 0 0xff8e0000 - 0xff8fffff (0x20000) MX[B]
[2] -1 0 0xffaff900 - 0xffaff9ff (0x100) MX[B]
[3] -1 0 0xffaffa00 - 0xffaffbff (0x200) MX[B]
[4] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[5] -1 0 0xffaffc00 - 0xffafffff (0x400) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xff7e0000 - 0xff7effff (0x10000) MX[B](B)
[8] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[9] -1 0 0xff7c0000 - 0xff7dffff (0x20000) MX[B](B)
[10] -1 0 0xff7f0000 - 0xff7fffff (0x10000) MX[B](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[12] -1 0 0x0000c800 - 0x0000c87f (0x80) IX[B]
[13] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[14] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[15] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[16] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[17] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[18] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[19] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[20] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[21] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[22] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[23] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xff9fe800 - 0xff9fefff (0x800) MX[B]
[6] -1 0 0xff8e0000 - 0xff8fffff (0x20000) MX[B]
[7] -1 0 0xffaff900 - 0xffaff9ff (0x100) MX[B]
[8] -1 0 0xffaffa00 - 0xffaffbff (0x200) MX[B]
[9] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[10] -1 0 0xffaffc00 - 0xffafffff (0x400) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xff7e0000 - 0xff7effff (0x10000) MX[B](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[14] -1 0 0xff7c0000 - 0xff7dffff (0x20000) MX[B](B)
[15] -1 0 0xff7f0000 - 0xff7fffff (0x10000) MX[B](B)
[16] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000c800 - 0x0000c87f (0x80) IX[B]
[20] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[21] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[22] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[23] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[24] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[25] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[26] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[27] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[28] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[29] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[30] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0.1, module version = 3.14.6
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000),
ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000),
ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9),
ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO),
ATI RV280 Ya (R9200LE), ATI RV250SE Yd (R9200SE),
ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500),
ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500),
ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600),
ATI RV350SE AQ (R9600SE), ATI RV350 AR (R9600 PRO),
ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500),
ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1),
ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO),
ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1),
ATI R350SE AH (R9800SE), ATI R350 AK (Fire GL unknown),
ATI RV350 AS (Fire GL T2), ATI RV350 AT (Fire GL T2),
ATI RV350 AU (Fire GL T2), ATI RV350 AV (Fire GL T2),
ATI RV350 AW (Fire GL T2), ATI R350 NH (R9800),
ATI R350LE NI (R9800LE), ATI R350 NJ (R9800),
ATI R350 NK (Fire GL X2), ATI RV350 NT (WS/M10), ATI RV370 5B60,
ATI RV370 5B61, ATI RV370 5B62, ATI RV370 5B63, ATI RV370 5B64,
ATI RV370 5B66, ATI RV370 5B67, ATI RV370 5B70, ATI RV370 5B71,
ATI RV370 5B72, ATI RV370 5B73, ATI RV370 5460, ATI RV370 5461,
ATI RV370 5462, ATI RV370 5463, ATI RV370 5464, ATI RV370 5465,
ATI RV370 5466, ATI RV370 5467, ATI RV370 5470, ATI RV370 5471,
ATI RV370 5472, ATI RV370 5473, ATI RV380 AP, ATI RV380 AQ,
ATI RV380 AR, ATI RV380 AS, ATI RV380 AT, ATI RV380 AU, ATI RV380 AV,
ATI RV380 AW, ATI RV380 AP2, ATI RV380 AQ2, ATI RV380 AR2,
ATI RV380 AS2, ATI RV380 NP, ATI RV380 NQ, ATI RV380 NR,
ATI RV380 NS, ATI RV380 NT, ATI RV380 NU, ATI RV380 NV, ATI RV380 NW,
ATI RV380 NP2, ATI RV380 NQ2, ATI RV380 NR2, ATI RV380 NS2,
ATI R420 JH, ATI R420 JI, ATI R420 JJ, ATI R420 JK, ATI R420 JL,
ATI R420 JM, ATI R420 JN, ATI R420 JP, ATI R423 UH, ATI R423 UI,
ATI R423 UJ, ATI R423 UK, ATI R423 UL, ATI R423 UM, ATI R423 ]W,
ATI R423 UP, ATI R423 UQ, ATI R423 UR, ATI R423 UT, ATI R423 ]H,
ATI R423 ]I, ATI RV410 VJ, ATI RV410 VK, ATI RV410 VL, ATI RV410 VM,
ATI RV410 ^H, ATI RV410 ^I, ATI RV410 ^J, ATI RV410 ^K, ATI RV410 ^L,
ATI RV410 ^M, ATI RV410 ^O, ATI RV410 VR, ATI RV410 VS, ATI RV410 ^R,
ATI RV410 ^S, ATI RV410 ^U, ATI RS300 IGP, ATI RS350 IGP,
ATI RS300M IGP
(II) Primary Device is: PCI 01:00:0
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset ATI RV350 AR (R9600 PRO) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xff9fe800 - 0xff9fefff (0x800) MX[B]
[6] -1 0 0xff8e0000 - 0xff8fffff (0x20000) MX[B]
[7] -1 0 0xffaff900 - 0xffaff9ff (0x100) MX[B]
[8] -1 0 0xffaffa00 - 0xffaffbff (0x200) MX[B]
[9] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[10] -1 0 0xffaffc00 - 0xffafffff (0x400) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xff7e0000 - 0xff7effff (0x10000) MX[B](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[14] -1 0 0xff7c0000 - 0xff7dffff (0x20000) MX[B](B)
[15] -1 0 0xff7f0000 - 0xff7fffff (0x10000) MX[B](B)
[16] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000c800 - 0x0000c87f (0x80) IX[B]
[20] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[21] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[22] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[23] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[24] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[25] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[26] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[27] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[28] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[29] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[30] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x820c220
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xff9fe800 - 0xff9fefff (0x800) MX[B]
[6] -1 0 0xff8e0000 - 0xff8fffff (0x20000) MX[B]
[7] -1 0 0xffaff900 - 0xffaff9ff (0x100) MX[B]
[8] -1 0 0xffaffa00 - 0xffaffbff (0x200) MX[B]
[9] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[10] -1 0 0xffaffc00 - 0xffafffff (0x400) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xff7e0000 - 0xff7effff (0x10000) MX[B](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[14] -1 0 0xff7c0000 - 0xff7dffff (0x20000) MX[B](B)
[15] -1 0 0xff7f0000 - 0xff7fffff (0x10000) MX[B](B)
[16] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000c800 - 0x0000c87f (0x80) IX[B]
[23] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[24] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[25] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[26] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[27] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[28] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[29] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[30] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[31] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[32] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[33] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000000"
(**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "2"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "4"
(**) fglrx(0): Option "FSAAEnable" "yes"
(**) fglrx(0): Option "FSAADisableGamma" "yes"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "no"
(**) fglrx(0): Option "TVStandard" "NTSC-M"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "ATI RV350 AR (R9600 PRO)" (Chipset = 0x4152)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x7c29)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xff7f0000
(--) fglrx(0): ROM-BIOS at 0xff7c0000
(--) fglrx(0): ChipExtRevID = 0x00
(--) fglrx(0): ChipIntRevID = 0x0C
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(**) fglrx(0): MonitorLayout Option:
Monitor1--Type AUTO, Monitor2--Type AUTO
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1
(II) fglrx(0): Primary head:
Monitor -- NONE
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- DVI_DDC
(II) fglrx(0): Secondary head:
Monitor -- CRT
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) fglrx(0): EDID data from the display on Secondary head ---------------------------
(II) fglrx(0): Manufacturer: DEL Model: 3000 Serial#: 1145591883
(II) fglrx(0): Year: 2001 Week: 4
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync: Separate Composite
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) fglrx(0): Gamma: 2.26
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): GTF timings supported
(II) fglrx(0): redX: 0.625 redY: 0.338 greenX: 0.281 greenY: 0.602
(II) fglrx(0): blueX: 0.149 blueY: 0.073 whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) fglrx(0): #2: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #3: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #4: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 94.5 MHz Image Size: 306 x 230 mm
(II) fglrx(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) fglrx(0): Serial No: 49FYF11PDHXK
(II) fglrx(0): Monitor name: DELL P791
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 96 kHz, PixClock max 210 MHz
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(**) fglrx(0): PseudoColor visuals disabled
(**) fglrx(0): Overlay disabled
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total 3 valid mode(s) found.
(--) fglrx(0): Virtual size is 1024x768 (pitch 1024)
(**) fglrx(0): *Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
(**) fglrx(0): *Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
(II) fglrx(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) fglrx(0): *Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(--) fglrx(0): Display dimensions: (320, 240) mm
(--) fglrx(0): DPI set to (81, 81)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma disabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0.1, module version = 3.14.6
ABI class: XFree86 Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x00000a6c
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=2
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xff7f0000 - 0xff7fffff (0x10000) MX[B]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xff9fe800 - 0xff9fefff (0x800) MX[B]
[8] -1 0 0xff8e0000 - 0xff8fffff (0x20000) MX[B]
[9] -1 0 0xffaff900 - 0xffaff9ff (0x100) MX[B]
[10] -1 0 0xffaffa00 - 0xffaffbff (0x200) MX[B]
[11] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[12] -1 0 0xffaffc00 - 0xffafffff (0x400) MX[B]
[13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[14] -1 0 0xff7e0000 - 0xff7effff (0x10000) MX[B](B)
[15] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[16] -1 0 0xff7c0000 - 0xff7dffff (0x20000) MX[B](B)
[17] -1 0 0xff7f0000 - 0xff7fffff (0x10000) MX[B](B)
[18] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[22] 0 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[25] -1 0 0x0000c800 - 0x0000c87f (0x80) IX[B]
[26] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[27] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[28] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[29] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[30] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B]
[31] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[32] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[33] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[34] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[35] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[36] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM area: 0xc0501000 (size=0x07aff000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(WW) fglrx(0): could not detect XFree86 version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmOpenByBusid: drmOpenMinor returns 4
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf9b4a000
(II) fglrx(0): [drm] mapped SAREA 0xf9b4a000 to 0xb7d5d000
(II) fglrx(0): [drm] framebuffer handle = 0xc0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 3.14.6
(II) fglrx(0): Date: Oct 30 2004
(II) fglrx(0): Desc: ATI Fire GL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.9-gentoo-r4
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xff7f0000
(II) fglrx(0): [agp] Mode=0x1f004a1b bridge: 0x8086/0x2578
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f004b1a
(II) fglrx(0): [agp] AGP protocoll is enabled for grafics board. (cmd=0x1f004312)
(II) fglrx(0): [agp] grafics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xf9d81000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x00501000
(II) fglrx(0): FBMM initialized for area (0,0)-(1024,1281)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 768)
(II) fglrx(0): Largest offscreen area available: 1024 x 505
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
24 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0
No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0
No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0
No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0
No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0
No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0
No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0
No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0
No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0
No matching visual for __GLcontextMode with visual class = -1 (-1), nplanes = 0
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/psaux"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Mouse1: SmartScroll: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "it"
(**) Keyboard1: XkbLayout: "it"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from list!
SetClientVersion: 0 8
|
Grazie ancora a chi mi volesse dare una mano, per me sarebbe davvero improbabile capirci qualcosa se non ci fosse questo forum.
Byez
_________________
Legge di Hofstaedter (ricorsiva):
Tutto richiede più tempo di quanto stimato, anche considerando la Legge di Hofstaedter.
Douglas R. Hofstaedter |
|
| Back to top |
|
|
kaylord
n00b
Joined: 23 Nov 2004
Posts: 24
Location: Milano
|
| Posted: Sat Jan 22, 2005 1:47 pm Post subject: |
|
|
| Thundah wrote: | Prova a guardare /var/log/Xorg....
Magari ti da gia problemi d'avvio del server X, cmq che versione di xorg hai? Mi era capitato che si stincasse il pc
|
Riporto a seguito anche un estratto di xorg.conf, magari torna utile... cutto le parti non rilevanti per quanto concerne la scheda video:
| Code: |
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
# Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
Group 100 # users
Mode 0660
EndSection
.....
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
.....
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "no"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "yes"
Option "FSAAScale" "4"
Option "FSAADisableGamma" "yes"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "2"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
#era no
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4152
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "ATI Graphics Adapter"
Monitor "dellp991"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
|
Grazie again!
_________________
Legge di Hofstaedter (ricorsiva):
Tutto richiede più tempo di quanto stimato, anche considerando la Legge di Hofstaedter.
Douglas R. Hofstaedter |
|
| Back to top |
|
|
Cazzantonio
Bodhisattva
Joined: 20 Mar 2004
Posts: 4514
Location: Somewere around the world
|
| Posted: Sat Jan 22, 2005 2:26 pm Post subject: |
|
|
non riesco a guardare un log di quella lunghezza... (magari prova a fare delle ricerche con una chiave x del tipo
| Code: | | cat /var/log/pippo.log |grep x |
se hai problemi con gli ati drivers e xorg ci sono decine di topic al riguardo... sei sicuro che in nessuno di questi venga affrontato il tuo problema?
_________________
Any mans death diminishes me, because I am involved in Mankinde; and therefore never send to know for whom the bell tolls; It tolls for thee.
-John Donne |
|
| Back to top |
|
|
kaylord
n00b
Joined: 23 Nov 2004
Posts: 24
Location: Milano
|
| Posted: Sat Jan 22, 2005 3:02 pm Post subject: |
|
|
| Cazzantonio wrote: | non riesco a guardare un log di quella lunghezza... (magari prova a fare delle ricerche con una chiave x del tipo
| Code: | | cat /var/log/pippo.log |grep x |
se hai problemi con gli ati drivers e xorg ci sono decine di topic al riguardo... sei sicuro che in nessuno di questi venga affrontato il tuo problema? |
GIà Antonio, mi rendo conto che il log è enorme, d'altro canto capendone poco non so realmente cosa possa esser significativo e cosa no. 
Per quanto riguarda il problema... ho guardato su tutti i thread che parlano di ATI + Xorg, ma nessuno riporta quanto accade a me... ovvero, se lancio glxconfig da console la macchina si freeza per qualche secondo, dopodiché mi ritrovo davanti alla schermata di login di kde (imho é Xorg che crasha).
Perdonate la noobyness nel riportare il log, sono tristemente poco sgamato su queste cose, roba nuova per me!! 
Il fatto è che quelli che ho visto sono tutti warnings tra l'altro, non ho la pallida idea di dove ricercare la gabola.
Byez e thx anyway:)
_________________
Legge di Hofstaedter (ricorsiva):
Tutto richiede più tempo di quanto stimato, anche considerando la Legge di Hofstaedter.
Douglas R. Hofstaedter |
|
| Back to top |
|
|
randomaze
Bodhisattva
Joined: 21 Oct 2003
Posts: 9985
|
| Posted: Sat Jan 22, 2005 4:37 pm Post subject: |
|
|
| kaylord wrote: | | ovvero, se lancio glxconfig da console la macchina si freeza per qualche secondo, dopodiché mi ritrovo davanti alla schermata di login di kde (imho é Xorg che crasha) |
Scusate la mia ignoranza in materia di driver closed e accellerazione 3D, ma cosa sarebbe 'glxconfig'?
Cosa intendi con 'da console'? Ti riferisci a una finestra di terminale?
Dopo un "crash di X" prova a dare uno sguardo anche agli altri file di log, sia quello del kernel che /var/log/Xorg.0.log.old, se veramente é crashato X forse trovi qualche informazione in fondo.
_________________
Ciao da me! |
|
| Back to top |
|
|
Cazzantonio
Bodhisattva
Joined: 20 Mar 2004
Posts: 4514
Location: Somewere around the world
|
| Posted: Sat Jan 22, 2005 5:39 pm Post subject: |
|
|
prova a vedere qua:
https://forums.gentoo.org/viewtopic.php?t=239037&highlight=ati+xorg+crash+glxinfo
tl'ho trovato facendo una semplice ricerca e usando come parole chiave "ati xorg crash glxinfo"....
se provi cercare spesso trovi che molte persone hanno già avuto lo stesso tuo problema.... a volte risolvi leggendo i loro post, altrimenti apri un topic nuovo o (meglio) continui su uno vecchio....
_________________
Any mans death diminishes me, because I am involved in Mankinde; and therefore never send to know for whom the bell tolls; It tolls for thee.
-John Donne |
|
| Back to top |
|
|
kaylord
n00b
Joined: 23 Nov 2004
Posts: 24
Location: Milano
|
| Posted: Sun Jan 23, 2005 2:24 pm Post subject: |
|
|
Seen.... ma purtroppo il thread è vecchio, il tizio ha problemi con Xorg 6.8 dovuti alle precedenti incompatibilità dei driver ATI... Ora che i driver ATI nuovi supportano Xorg6.8, le cose son un pò cambiate.
Insomma, ci ho dato un'occhiata ma non sembra rientrare nella descrizione del mio problema purtroppo.
| Cazzantonio wrote: |
tl'ho trovato facendo una semplice ricerca e usando come parole chiave "ati xorg crash glxinfo"....
se provi cercare spesso trovi che molte persone hanno già avuto lo stesso tuo problema.... a volte risolvi leggendo i loro post, altrimenti apri un topic nuovo o (meglio) continui su uno vecchio.... |
Avevo già provato Antonio, ma non mi sembrava che niente fosse simile o riferibile alle stesse cause del mio problema.
Thx anyway, appena avrò un pò di tempo ci cozzerò maggiormente la testa, magari salta fuori qualche info interessante su cui chiedere.
_________________
Legge di Hofstaedter (ricorsiva):
Tutto richiede più tempo di quanto stimato, anche considerando la Legge di Hofstaedter.
Douglas R. Hofstaedter |
|
| Back to top |
|
|
sam75
n00b
Joined: 15 Nov 2004
Posts: 59
|
|
| Back to top |
|
|
Cazzantonio
Bodhisattva
Joined: 20 Mar 2004
Posts: 4514
Location: Somewere around the world
|
| Posted: Sun Jan 23, 2005 6:26 pm Post subject: |
|
|
non mi chiamo Antonio.... sul forum sono cazzantonio, altrimenti mi puoi anche chiamare con il mio vero nome (Alessio) ma è meglio se usi il nick almeno tutti capiscono a chi ti riferisci
P.Sò. hai provato ad usare gli ati drivers masked?
_________________
Any mans death diminishes me, because I am involved in Mankinde; and therefore never send to know for whom the bell tolls; It tolls for thee.
-John Donne |
|
| Back to top |
|
|
sam75
n00b
Joined: 15 Nov 2004
Posts: 59
|
| Posted: Sun Jan 23, 2005 7:09 pm Post subject: |
|
|
| Quote: | | P.Sò. hai provato ad usare gli ati drivers masked? |
gia', solo ora ho notato che
| Code: | (II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0.1, module version = 3.14.6 |
prova i nuovi ati-drivers 8.8.25-r1
suggerimento:
metti in /etc/portage/package.keywords
| Code: | >=media-video/ati-drivers-8.8.25 ~x86
>=media-video/ati-drivers-extra-8.8.25 ~x86 |
ciao |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
