| View previous topic :: View next topic |
| Author |
Message |
zieloo
Veteran
Joined: 28 Mar 2004
Posts: 1337
|
 Posted: Fri Mar 18, 2005 4:04 pm Post subject: [SOLVED] Cannot add 'glx' module |
 |
|
I've updated it from xfree (btw: why xfree ebuild changed its name to xorg-x11-4.3.0, only wersion names differ?) and after thousands of painful restarts I'm able to use Firefox to write this post.
Xorg failed to use my old-but-tested xfree conf, so I used xorgconfig (or whatever it's called) to generate it and then manually edited.
Fonts: I leave them for a while cuz there're more important things I want to ask about. They just look ugly...
Glx: No problem configuring it under xfree, but not it does not work.
Mouse: It's a 'standard' ps/2 opitical 2-button+a wheel mouse. Works but without the wheel.
Fragment of my xorg.conf:
| Code: |
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "speedo"
Load "freetype"
Load "xtt"
# Load "glx"
# Load "GLcore"
Load "extmod"
Load "fbdevhw"
# Load "glx"
Load "dri"
|
Commented dri all Gl-stuff, cuz otherwise cannot get into X (system locks - actually not locks, but I'm left without access to my mouse and keyboard).
| Code: | Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
Option "Buttons" "3" |
The last option was added just before, didn't need that before.
| Code: | Chipset "i810"
Driver "i810"
|
| Code: | Section "Device"
Identifier "video"
Driver "i810"
VideoRam 32768
EndSection |
EndSection
| Code: | Section "dri"
Group 0
Mode 0666
EndSection |
So what's no right. Did I missed sth?
Thanx for suggestions.
[edit: some more info added]
Last edited by zieloo on Sun Mar 20, 2005 4:37 pm; edited 3 times in total |
|
| Back to top |
|
 |
zieloo
Veteran
Joined: 28 Mar 2004
Posts: 1337
|
| Posted: Fri Mar 18, 2005 4:42 pm Post subject: |
|
|
Cannot start xorg with glx module loaded so:
| Code: | glxinfo
name of display: :0.0
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x21 24 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None |
A part of xorg-log:
| Code: | (WW) I810(0): Failed to set up write-combining range (0xf0000000,0x8000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): xf86BindGARTMemory: bind key 4 at 0x007df000 (pgoffset 2015)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x07ffb000 (pgoffset 32763)
(II) I810(0): xf86BindGARTMemory: bind key 3 at 0x07fea000 (pgoffset 32746)
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x07ffa000 (pgoffset 32762)
(WW) I810(0): PGTBL_ER is 0x00000029
(WW) I810(0): Extended BIOS function 0x5f05 not supported.
(II) I810(0): BIOS call 0x5f05 not supported, setting refresh with VBE 3 method.
(II) I810(0): Display plane A is enabled and connected to Pipe A.
(II) I810(0): Enabling plane A.
(II) I810(0): Display plane A is now enabled and connected to Pipe A.
(II) I810(0): PIPEACONF is 0x80000000
(II) I810(0): Mode bandwidth is 47 Mpixel/s
(WW) I810(0): Extended BIOS function 0x5f28 not supported.
(WW) I810(0): Extended BIOS function 0x5f61 not supported.
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
12 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(II) I810(0): Initializing HW Cursor
(II) I810(0): direct rendering: Failed
(==) RandR enabled
Symbol __glXgetActiveScreen from module /usr/lib/modules/extensions/libdri.a is unresolved!
Symbol __glXgetActiveScreen from module /usr/lib/modules/extensions/libdri.a is unresolved!
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/psaux"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Mouse1: SmartScroll: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "pl"
(**) Keyboard1: XkbLayout: "pl"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/CID/, removing from list!
Could not init font path element /usr/share/fonts/local/, removing from list!
Could not init font path element /usr/share/fonts/Speedo/, removing from list!
SetClientVersion: 0 8 |
Mouse wheel is now working (I'm using a deffirent type of mouse so needed to adjust the config).
But the direct render/glx module problem is still unsolved.
[edit: typo] |
|
| Back to top |
|
|
zieloo
Veteran
Joined: 28 Mar 2004
Posts: 1337
|
| Posted: Sat Mar 19, 2005 5:16 pm Post subject: |
|
|
Boom!!
Just wanted to attract your attention...
Any idea where lies the problem? |
|
| Back to top |
|
|
zieloo
Veteran
Joined: 28 Mar 2004
Posts: 1337
|
| Posted: Sun Mar 20, 2005 4:36 pm Post subject: |
|
|
Ok the problem is solved for now. I needed to change a line in xorg.conf in section Modules:
| Code: | Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "speedo"
Load "freetype"
Load "xtt"
# Load "glx"
# Load "GLcore"
Load "extmod"
Load "fbdevhw"
Load "dri" |
Chould be:
| Code: | Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
# Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "speedo"
Load "freetype"
Load "xtt"
Load "glx"
Load "GLcore"
Load "extmod"
Load "fbdevhw"
Load "dri" |
As you see
| Code: | | Option "omit xfree86-dga" |
line must be commented out, otherwise cannot load glx module. |
|
| Back to top |
|
|
|
Desktop Environments
