| View previous topic :: View next topic |
| Author |
Message |
evan18h
Tux's lil' helper
Joined: 02 Dec 2004
Posts: 83
|
 Posted: Fri Jan 28, 2005 7:28 pm Post subject: What is up with my wireless adapter |
 |
|
I am attemping to get a Linksys WUSB11 ver2.5 (usb adapter) to work under linux.
Both linux-wlan-ng and ndiswrapper are running, it would find the adapter and almost let me bring it up as wlan0 but gave me this error: SIOCSIFFLAGS: No such device
when I tried again this morning dmesg gave me this after starting ndiswrapper and plugging in the wireless adapter:
| Code: |
ndiswrapper version 0.12 loaded (preempt=yes,smp=yes)
usbcore: registered new driver lswlusb
ndiswrapper: driver lswlusb (Linksys,05/28/2002,2.0.2.36) added
usb 1-1.4: new full speed USB device using uhci_hcd and address 8
usb 1-1.4: config 1 has an invalid interface number: 1 but max is 0
usb 1-1.4: config 1 has no interface number 0
Unable to handle kernel NULL pointer dereference at virtual address 00000007
printing eip:
e0c845ba
*pde = 00000000
Oops: 0000 [#1]
PREEMPT SMP
Modules linked in: ndiswrapper nvidia iptable_raw ipt_NOTRACK libcrc32c sata_sx4 sata_sis ipr s2io dummy intel_mch_agp
CPU: 0
EIP: 0060:[<e0c845ba>] Tainted: P VLI
EFLAGS: 00010246 (2.6.10)
EIP is at 0xe0c845ba
eax: 00000000 ebx: ffffffff ecx: 00003470 edx: d3ed4000
esi: ffffffff edi: ffffffff ebp: dfea5d70 esp: dfea5d58
ds: 007b es: 007b ss: 0068
Process khubd (pid: 114, threadinfo=dfea5000 task=c1569520)
Stack: d3fd8fa0 00000000 00003478 00000000 00000000 e0c8bbc7 dfea5d8c e0c8bc16
00000000 dfea5de8 e0c8bb3e 00000000 00000000 00000000 e0ca3662 dfea5dac
dfea5db0 dfea5db4 d3ed4000 d3fdb220 d3fdb220 c043cd53 00000000 00000000
Call Trace:
[<e0ca3662>] miniport_init+0x62/0xb0 [ndiswrapper]
[<c0103b1e>] common_interrupt+0x1a/0x20
[<e0ca5825>] ndis_init_one_usb+0x65/0x1b0 [ndiswrapper]
[<c0317e22>] usb_probe_interface+0x72/0x90
[<c02a6dff>] driver_probe_device+0x2f/0x80
[<c02a6e8f>] device_attach+0x3f/0xa0
[<c023f83a>] kobject_get+0x1a/0x30
[<c02a71dc>] bus_add_device+0x5c/0xb0
[<c02a9f1c>] device_pm_add+0x5c/0xa0
[<c02a5df6>] device_add+0xc6/0x160
[<c031f993>] usb_set_configuration+0x303/0x470
[<c031a692>] usb_new_device+0xb2/0x170
[<c031b609>] hub_port_connect_change+0x219/0x3f0
[<c031ba34>] hub_events+0x254/0x380
[<c031bb95>] hub_thread+0x35/0x120
[<c01316a0>] autoremove_wake_function+0x0/0x60
[<c0103082>] ret_from_fork+0x6/0x14
[<c01316a0>] autoremove_wake_function+0x0/0x60
[<c031bb60>] hub_thread+0x0/0x120
[<c01012d5>] kernel_thread_helper+0x5/0x10
Code: c2 0c 00 55 8b ec 83 ec 0c 53 8b 5d 08 56 57 68 f0 d0 c8 e0 53 ff 73 08 ff 73 04 e8 99 52 00 00 85 c0 89 45 08 0f 85 2b 01 00 00 <ff> 73 08 8d 45 fc 50 8d 45 08 50 ff 15 54 ca c8 e0 83 7d 08 00
<5>prism2usb_init: prism2_usb.o: 0.2.1-pre26 Loaded
prism2usb_init: dev_info is: prism2_usb |
and "ifconfig wlan0 up" now gives:
wlan0: unknown interface: No such device
Any Ideas? |
|
| Back to top |
|
 |
Invincible_777
Tux's lil' helper
Joined: 06 Nov 2004
Posts: 107
Location: Washington, USA
|
| Posted: Sat Jan 29, 2005 2:38 am Post subject: |
|
|
I have probably not alot of help, mostly because I use a pci wireless WG311 b/g card. Have you tried Madwifi? It works for my card, (however, not modprobing in my new 2.6.10 kernel yet.) I have never used ndiswrapper though, so I may be mistaken. Just was looking to help an unaswered post 
[Edit: My card works awesome now...] 
_________________
Carry out the bigger will for your life.... |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
