| View previous topic :: View next topic |
| Author |
Message |
MikeNobody
n00b
Joined: 22 Dec 2004
Posts: 2
Location: Madrid@localhost.es
|
 Posted: Thu Feb 17, 2005 1:04 pm Post subject: SieFS (GNU/Linux) & Siemens S65 ... no lo consigo :( |
 |
|
Hola!
Estoy intentando conectar mi S65 en Linux pero no doy con la solucion ....
Tengo :
- Portatil sin puertos serie y 4 usb
- Cable no original serie x55 (USB-COM)
- Siemens S65
- Gentoo Linux
- Kernel 2.6.8-gentoo-r3
- Udev (no devfs)
La salida de lsusb me dice ...
| Code: | MoVeWoRk mikelevel # lsusb
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 1241:1111 Belkin (?) Mouse
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 008: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 001 Device 001: ID 0000:0000 |
La salida del dmesg me dice ...
| Code: | ehci_hcd 0000:00:10.3: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 4-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
hub 4-0:1.0: port 1 not reset yet, waiting 50ms
ehci_hcd 0000:00:10.3: port 1 full speed --> companion
ehci_hcd 0000:00:10.3: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT
uhci_hcd 0000:00:10.0: wakeup_hc
uhci_hcd 0000:00:10.0: port 1 portsc 0093
hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 1-1: new full speed USB device using address 2
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: default language 0x0409
usb 1-1: Product: USB-Serial Controller
usb 1-1: Manufacturer: Prolific Technology Inc.
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbserial_generic 1-1:1.0: usb_probe_interface
usbserial_generic 1-1:1.0: usb_probe_interface - got id
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303
pl2303 1-1:1.0: usb_probe_interface
pl2303 1-1:1.0: usb_probe_interface - got id
pl2303 1-1:1.0: PL-2303 converter detected
usb 1-1: PL-2303 converter now attached to ttyUSB0
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.11 |
Tengo puesto el driver del cable ...
| Code: | Device Drivers --->
USB support --->
--- USB port drivers
USB Serial Converter support --->
<M> USB Serial Converter support
[*] USB Generic Serial Driver
<M> USB Prolific 2303 Single Port Serial Driver |
He instalado SieFS y Fuse .... que son su sistema de ficheros y tal
el problema es que al montar algunos dev q he probado lo monta sin problemas pero al final da error de entrada/salida ... Y he probado ya varias direcciones /dev que he visto en distintos tutoriales...
En la mayoria usan la misma sentencia para montarlo...
| Code: | | mount -t siefs /dev/xxx /sitio/para/montar |
Os muestro la prueba con el unico USB0 que he encontrado...
| Code: | MoVeWoRk mikelevel # mount -t siefs /dev/tts/USB0 /home/mikelevel/movil/
MoVeWoRk mikelevel # cd /home/mikelevel/movil/
MoVeWoRk movil # ls
ls: .: Error de entrada/salida |
Pero nada , no hay manera  |
|
| Back to top |
|
 |
Kuan
Tux's lil' helper
Joined: 03 Oct 2004
Posts: 79
Location: Spain, ../Zaragoza
|
| Posted: Thu Feb 17, 2005 10:52 pm Post subject: |
|
|
En algún foro leí que el sistema SieFS sólo funcionaba con núcleos de la serie 2.4.x.
Pero de todos modos tienes otra forma de conectarte a tu móvil con el EasyConnect, lo facilitan aquí. Ese modelo en concreto está soportado, lo que no puedo asegurarte es si podrás transferir datos al móvil. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Spanish
