| View previous topic :: View next topic |
| Author |
Message |
eNTi
Veteran
Joined: 20 Oct 2002
Posts: 1011
Location: Salzburg, Austria
|
 Posted: Wed Jan 05, 2005 4:55 pm Post subject: cdrecord fails on 2.6.10. |
 |
|
i really need some advice. wether my burner is dead, or the discs are crap or i don't know... is there any useful alternative to cdrecord? i'm very tempted to install windows, just to burn the gentoo install disc, but i slowly wonder what for? printing is crap, burning is crap, gaming is crap: ARGH!!! please someone help me and restore my faith in linux.
| Code: |
root@eNTi # cdrecord-ProDVD -v -dev=ATAPI:0,1,0 -data install-amd64-universal-20
04.3-r1.iso
cdrecord-ProDVD: No write mode specified.
cdrecord-ProDVD: Asuming -tao mode.
cdrecord-ProDVD: Future versions of cdrecord may have different drive dependent
defaults.
cdrecord-ProDVD: Continuing in 5 seconds...
Cdrecord-ProDVD-Clone 2.01b31 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg S
chilling
Unlocked features:
Limited features:
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:0,1,0'
devname: 'ATAPI'
scsibus: 0 target: 1 lun: 0
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identifikation : 'DVDR PX-708A '
Revision : '1.04'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: CD-R
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R (current)
Profile: CD-ROM
cdrecord-ProDVD: This version of cdrecord limits DVD-R/DVD-RW support to -dummy
or 1 GB real.
cdrecord-ProDVD: If you need full DVD-R/DVD-RW support, ask the Author for cdrec
ord-ProDVD.
cdrecord-ProDVD: Free test versions and free keys for personal use are at ftp://
ftp.berlios.de/pub/cdrecord/ProDVD/
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE VARIREC FORCESPEED SINGLESESSION HIDEC
DR
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1190112 = 1162 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 373 MB
Total size: 428 MB (42:28.28) = 191121 sectors
Lout start: 429 MB (42:30/21) = 191121 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -12369 (97:17/06)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 69
Manufacturer: Moser Baer India Limited
Manufacturer is guessed because of the orange forum embargo.
The orange forum likes to get money for recent information.
The information for this media may not be correct.
Single session is OFF.
Hide CDR is OFF.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 168728
Forcespeed is OFF.
Power-Rec is ON.
Power-Rec write speed: 40x (recommended)
Starting to write CD/DVD at speed 40 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
cdrecord-ProDVD: Input/output error. send opc: scsi sendcmd: no error
CDB: 54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 02 00 00 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 34.627s timeout 60s
cdrecord-ProDVD: OPC failed.
Writing time: 34.636s
Last selected write speed: 40x
Max media write speed: 40x
Last actual write speed: 0x
cdrecord-ProDVD: fifo had 64 puts and 0 gets.
cdrecord-ProDVD: fifo was 0 times empty and 0 times full, min fill was 100%. |
_________________
If you fall off a cliff, you might as well try to fly. After all, you got nothing to lose.
-- John Sheridan - Babylon 5, Season 4 |
|
| Back to top |
|
 |
ToeiRei
Veteran
Joined: 03 Jan 2005
Posts: 1191
Location: Austria
|
| Posted: Wed Jan 05, 2005 5:18 pm Post subject: |
|
|
you might want to try the ~x86 version of the cdrtools. They work here.
Rei
_________________
Please stand by - The mailer daemon is busy burning your messages in hell... |
|
| Back to top |
|
|
simon pants
n00b
Joined: 30 Apr 2004
Posts: 47
|
| Posted: Thu Mar 10, 2005 12:21 pm Post subject: |
|
|
I had a similar OPC failure using a SONY OEM DVD Writer. I upgraded the firmware twice. Once to covert from OEM SONY DW-U10A to Non-OEM SONY DRU-500A, and then once more to set the latest firmware. I googled for the firmware to convert from OEM as this wasn't on the Sony site. Once I had a SONY DRU-500A I could then use the Sony firmware update (from their site) to set to the latest.
In the background whilst I was solving this problem I installed and configured IVMAN in accordance with the HowTo posted on Gentoo-Wiki.com. This in turn led to a conversion to udev system and a disabling of the fsdev automounted in the kernel. I also enabled the SCSI interface in the kernel (sorry not at home so can't be more specific).
Overall this solved the problem for me. This was on kernel 2.6.10 with latest (as of this post) k3b and all the supporting software.
For writing I used Auto which in turn preselected DAO mode - which worked very well.
Hope this helps,
SimonP |
|
| Back to top |
|
|
vonhelmet
l33t
Joined: 06 Apr 2004
Posts: 770
Location: Somewhere in a school
|
|
| Back to top |
|
|
mascanho
Veteran
Joined: 21 Dec 2004
Posts: 1241
Location: On my Bmx Bike on a Concrete Park Flatlanding ...
|
| Posted: Fri Mar 11, 2005 6:30 pm Post subject: |
|
|
yup cdrdao fixed it for me 2
_________________
Flatland Life is a Choice !
emerge avatar |
|
| Back to top |
|
|
|
Multimedia
