View previous topic :: View next topic |
Author |
Message |
TL_Amitola n00b
Joined: 25 Jan 2004 Posts: 69 Location: Utah, USA
|
Posted: Sun Feb 27, 2005 12:02 am Post subject: Internal USB Reader problems |
|
|
So I decided to take the afternoon to finally fix / setup some things...
I got a good bit of stuff done with the help of the forum archives; but I couldn't get this working.
I have an internal USB Media reader, it reads CompactFlash, MMC, SD, SmartMedia, MediaStick, and MicroDrive... I have SD cards and CF cards.
I've setup SCSI support and can get SDA to show up... if I try to mount SDA it fails, and dmesg contains this:
Code: | SCSI device sda: 63488 512-byte hdwr sectors (33 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
SCSI device sda: 63488 512-byte hdwr sectors (33 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev sda.
|
... and then SDA1 shows up, which I can use to mount my CF cards, no problem:
Code: |
silverAMD dev # mount -t vfat /dev/sda1 /mnt/Flash_Drive
silverAMD dev # ls /mnt/Flash_Drive
dcim misc
silverAMD dev # |
My question is: how can I get SDA1 to show up without first making it error out on mounting SDA?
and
I can't find a way to mount my SD cards. nor could I find any pertinent information in the forum archives...
Thanks for any help. _________________ :-/ |
|
Back to top |
|
|
davecs Guru
Joined: 08 Nov 2003 Posts: 436 Location: Dagenham, GB
|
Posted: Sun Feb 27, 2005 12:45 am Post subject: |
|
|
From what I can gather, the Linux kernel does not like having empty card adaptors attached. I have an external adaptor, and if I put it in empty, or remove the card from it before I unplug it from the computer, I always have problems, one of which is that the usb-storage system stops working altogether, and the other is that I cannot do a clean shutdown because my harddrives don't unmount properly.
Sorry, this is not what you want to hear, is it? _________________ Gentoo, PCLOS-pre-81a and Windows 98SE.
Shuttle SN41G2V2
Athlon XP2500+ o/c to 3200+, 2x256Mb Geil Value RAM, FX5200.
Ntlworld cable internet via ethernet
and PC-Chips Desknote Laptop (with PCLOS-pre-81a ) |
|
Back to top |
|
|
TL_Amitola n00b
Joined: 25 Jan 2004 Posts: 69 Location: Utah, USA
|
Posted: Sun Feb 27, 2005 12:54 am Post subject: |
|
|
Well, I don't have any problems, mounting and unmounting the CF card after the first fail on SDA, I can do it as root or my regular user as much as I want and it works... and I can't find any evidence of errors when shutting down...
I just can't seem to get a device name for the SD reader. _________________ :-/ |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|