| View previous topic :: View next topic |
| Author |
Message |
pinguin45
n00b
Joined: 30 Nov 2004
Posts: 49
|
 Posted: Sun Mar 06, 2005 9:21 pm Post subject: usb festplatte wird nicht mehr erkannt [solved] |
 |
|
Hi
seit dem ich in meinen rechner eine sat und eine dxr3 karte eigebaut habe wird meine usb festplatte nicht mehr erkannt.
vorher hatte ich immer ein /dev/sda1 aber jetzt nicht mehr.
beim booten kommt immer folgende fehlermeldung:
| Quote: |
Mar 6 20:09:56 server USB Universal Host Controller Interface driver v2.2
Mar 6 20:09:56 server ACPI: PCI interrupt 0000:00:04.2[D] -> GSI 6 (level, low) -> IRQ 6
Mar 6 20:09:56 server uhci_hcd 0000:00:04.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Mar 6 20:09:56 server irq 6: nobody cared!
Mar 6 20:09:56 server [<c013aeaa>] __report_bad_irq+0x2a/0x90
Mar 6 20:09:56 server [<c013a820>] handle_IRQ_event+0x30/0x70
Mar 6 20:09:56 server [<c013af9c>] note_interrupt+0x6c/0xd0
Mar 6 20:09:56 server [<c013a990>] __do_IRQ+0x130/0x160
Mar 6 20:09:56 server [<c01056c6>] do_IRQ+0x46/0x70
Mar 6 20:09:56 server =======================
Mar 6 20:09:56 server [<c0103b7e>] common_interrupt+0x1a/0x20
Mar 6 20:09:56 server [<c012194d>] __do_softirq+0x4d/0xd0
Mar 6 20:09:56 server [<c01057da>] do_softirq+0x4a/0x60
Mar 6 20:09:56 server =======================
Mar 6 20:09:56 server [<c013a7e9>] irq_exit+0x39/0x40
Mar 6 20:09:56 server [<c01056cd>] do_IRQ+0x4d/0x70
Mar 6 20:09:56 server [<c0103b7e>] common_interrupt+0x1a/0x20
Mar 6 20:09:56 server [<c03f97e5>] _spin_unlock_irqrestore+0x5/0x20
Mar 6 20:09:56 server [<c013ac61>] setup_irq+0xa1/0x100
Mar 6 20:09:56 server [<c031bef0>] usb_hcd_irq+0x0/0x70
Mar 6 20:09:56 server [<c013ae44>] request_irq+0x84/0xc0
Mar 6 20:09:56 server [<c032020e>] usb_hcd_pci_probe+0x20e/0x520
Mar 6 20:09:56 server [<c031bef0>] usb_hcd_irq+0x0/0x70
Mar 6 20:09:56 server [<c02515f2>] pci_device_probe_static+0x52/0x70
Mar 6 20:09:56 server [<c025164c>] __pci_device_probe+0x3c/0x50
Mar 6 20:09:56 server [<c025168c>] pci_device_probe+0x2c/0x50
Mar 6 20:09:56 server [<c02ac9ef>] driver_probe_device+0x2f/0x80
Mar 6 20:09:56 server [<c02acb39>] driver_attach+0x59/0x90
Mar 6 20:09:56 server [<c02ad009>] bus_add_driver+0x99/0xd0
Mar 6 20:09:56 server [<c0251922>] pci_register_driver+0x72/0x90
Mar 6 20:09:56 server [<c0544244>] uhci_hcd_init+0xc4/0x130
Mar 6 20:09:56 server [<c05269bb>] do_initcalls+0x2b/0xc0
Mar 6 20:09:56 server [<c010053a>] init+0x7a/0x190
Mar 6 20:09:56 server [<c01004c0>] init+0x0/0x190
Mar 6 20:09:56 server [<c01012d1>] kernel_thread_helper+0x5/0x14
Mar 6 20:09:56 server handlers:
Mar 6 20:09:56 server [<c031bef0>] (usb_hcd_irq+0x0/0x70)
Mar 6 20:09:56 server Disabling IRQ #6
Mar 6 20:09:56 server uhci_hcd 0000:00:04.2: irq 6, io base 0xd400
Mar 6 20:09:56 server uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
Mar 6 20:09:56 server hub 1-0:1.0: USB hub found
Mar 6 20:09:56 server hub 1-0:1.0: 2 ports detected
Mar 6 20:09:56 server ACPI: PCI interrupt 0000:00:04.3[D] -> GSI 6 (level, low) -> IRQ 6
Mar 6 20:09:56 server uhci_hcd 0000:00:04.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
Mar 6 20:09:56 server uhci_hcd 0000:00:04.3: irq 6, io base 0xd000
Mar 6 20:09:56 server uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
Mar 6 20:09:56 server hub 2-0:1.0: USB hub found
Mar 6 20:09:56 server hub 2-0:1.0: 2 ports detected
Mar 6 20:09:56 server usb 1-2: new full speed USB device using uhci_hcd and address 2
Mar 6 20:09:56 server uhci_hcd 0000:00:04.2: Unlink after no-IRQ? Different ACPI or APIC settings may help.
Mar 6 20:09:56 server usb 1-2: khubd timed out on ep0in
Mar 6 20:09:56 server usb 1-2: khubd timed out on ep0out
Mar 6 20:09:56 server usb 1-2: khubd timed out on ep0out
Mar 6 20:09:56 server usb 1-2: device not accepting address 2, error -110
Mar 6 20:09:56 server usb 1-2: new full speed USB device using uhci_hcd and address 3
Mar 6 20:09:56 server usb 1-2: khubd timed out on ep0in
Mar 6 20:09:56 server usb 1-2: khubd timed out on ep0out
Mar 6 20:09:56 server usb 1-2: khubd timed out on ep0out
Mar 6 20:09:56 server usb 1-2: device not accepting address 3, error -110
Mar 6 20:09:56 server usbcore: registered new driver usblp
Mar 6 20:09:56 server drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Mar 6 20:09:56 server Initializing USB Mass Storage driver...
Mar 6 20:09:56 server usb 2-2: new full speed USB device using uhci_hcd and address 2
Mar 6 20:09:56 server uhci_hcd 0000:00:04.3: Unlink after no-IRQ? Different ACPI or APIC settings may help.
Mar 6 20:09:56 server usb 2-2: khubd timed out on ep0in
Mar 6 20:09:56 server usb 2-2: khubd timed out on ep0out
Mar 6 20:09:56 server usb 2-2: khubd timed out on ep0out
Mar 6 20:09:56 server usb 2-2: device not accepting address 2, error -110
Mar 6 20:09:56 server usb 2-2: new full speed USB device using uhci_hcd and address 3
Mar 6 20:09:56 server usb 2-2: khubd timed out on ep0in
Mar 6 20:09:56 server usb 2-2: khubd timed out on ep0out
Mar 6 20:09:56 server usb 2-2: khubd timed out on ep0out
Mar 6 20:09:56 server usb 2-2: device not accepting address 3, error -110
Mar 6 20:09:56 server usbcore: registered new driver usb-storage
Mar 6 20:09:56 server USB Mass Storage support registered.
Mar 6 20:09:56 server usbcore: registered new driver usbhid
Mar 6 20:09:56 server drivers/usb/input/hid-core.c: v2.0:USB HID core driver |
woran kann das liegen? bzw wie kann ich es beheben?
Last edited by pinguin45 on Sun Mar 06, 2005 10:06 pm; edited 1 time in total |
|
| Back to top |
|
 |
Voltago
Advocate
Joined: 02 Sep 2003
Posts: 2593
Location: userland
|
| Posted: Sun Mar 06, 2005 9:31 pm Post subject: |
|
|
| Tjo, das riecht nach IRQ-Konflikt. Kann ich mal Dein ganzes dmesg output sehen? |
|
| Back to top |
|
|
pinguin45
n00b
Joined: 30 Nov 2004
Posts: 49
|
| Posted: Sun Mar 06, 2005 9:33 pm Post subject: |
|
|
da steht eigentlich das gleiche drin :
| Quote: |
Linux version 2.6.10-gentoo-r6 (root@server) (gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #6 SMP Sun Mar 6 21:03:42 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131052
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126956 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f6730
ACPI: RSDT (v001 ASUS A7V 0x30303031 MSFT 0x31313031) @ 0x1ffec000
ACPI: FADT (v001 ASUS A7V 0x30303031 MSFT 0x31313031) @ 0x1ffec080
ACPI: BOOT (v001 ASUS A7V 0x30303031 MSFT 0x31313031) @ 0x1ffec040
ACPI: DSDT (v001 ASUS A7V 0x00001000 MSFT 0x0100000b) @ 0x00000000
Built 1 zonelists
Kernel command line: root=/dev/hda3 pci=routeirq
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01446000)
Initializing CPU#0
CPU 0 irqstacks, hard=c0569000 soft=c0561000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 706.375 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513728k/524208k available (3050k kernel code, 9956k reserved, 1186k data, 220k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1384.44 BogoMIPS (lpj=692224)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c60)
CPU0: AMD Athlon(tm) Processor stepping 01
per-CPU timeslice cutoff: 182.73 usecs.
task migration cache decay timeout: 1 msecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
CPU0:
domain 0: span 01
groups: 01
domain 1: span 01
groups: 01
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf10f0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 02): [55] 81 & 1f -> 01
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** Routing PCI interrupts for all devices because "pci=routeirq"
** was specified. If this was required to make a driver work,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
PCI: setting IRQ 6 as level-triggered
ACPI: PCI interrupt 0000:00:04.2[D] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI interrupt 0000:00:04.3[D] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
pnp: 00:02: ioport range 0xe800-0xe80f has been reserved
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1110147330.088:0): initialized
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
PCI: Disabling Via external APIC routing
inotify device minor=63
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Processor [CPU0] (supports 16 throttling states)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
parport_pc: VIA parallel port: io=0x378, irq=7
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
elevator: using anticipatory as default io scheduler
irq 6: nobody cared!
[<c013aeaa>] __report_bad_irq+0x2a/0x90
[<c013a820>] handle_IRQ_event+0x30/0x70
[<c013af9c>] note_interrupt+0x6c/0xd0
[<c013a990>] __do_IRQ+0x130/0x160
[<c01056c6>] do_IRQ+0x46/0x70
=======================
[<c0103b7e>] common_interrupt+0x1a/0x20
[<c012194d>] __do_softirq+0x4d/0xd0
[<c01057da>] do_softirq+0x4a/0x60
=======================
[<c013a7e9>] irq_exit+0x39/0x40
[<c01056cd>] do_IRQ+0x4d/0x70
[<c0103b7e>] common_interrupt+0x1a/0x20
[<c03f9165>] _spin_unlock_irqrestore+0x5/0x20
[<c013ac61>] setup_irq+0xa1/0x100
[<c02be4c0>] floppy_hardint+0x0/0x100
[<c013ae44>] request_irq+0x84/0xc0
[<c02be67a>] fd_request_irq+0x3a/0x70
[<c02be4c0>] floppy_hardint+0x0/0x100
[<c02c4fcf>] floppy_grab_irq_and_dma+0x3f/0x3b0
[<c054093a>] floppy_init+0x23a/0x6c0
[<c02c4f20>] floppy_find+0x0/0x70
[<c05259bb>] do_initcalls+0x2b/0xc0
[<c010053a>] init+0x7a/0x190
[<c01004c0>] init+0x0/0x190
[<c01012d1>] kernel_thread_helper+0x5/0x14
handlers:
[<c02be4c0>] (floppy_hardint+0x0/0x100)
Disabling IRQ #6
floppy0: no floppy controllers found
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL8139 at 0xa000, 00:02:44:06:4f:0c, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C'
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:04.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: IBM-DJNA-351520, ATA DISK drive
hdb: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
PDC20265: IDE controller at PCI slot 0000:00:11.0
ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 10 (level, low) -> IRQ 10
PDC20265: chipset revision 2
PDC20265: 100% native mode on irq 10
PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0x8400-0x8407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x8408-0x840f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hde: IBM-DTLA-305040, ATA DISK drive
Warning: Primary channel requires an 80-pin cable for operation.
hde reduced to Ultra33 mode.
ide2 at 0x9800-0x9807,0x9402 on irq 10
Probing IDE interface ide3...
hdh: Maxtor 6E040L0, ATA DISK drive
ide3 at 0x9000-0x9007,0x8802 on irq 10
Probing IDE interface ide1...
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 30033360 sectors (15377 MB) w/430KiB Cache, CHS=29795/16/63, UDMA(33)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hde: max request size: 128KiB
hde: 80418240 sectors (41174 MB) w/380KiB Cache, CHS=65535/16/63, UDMA(33)
hde: cache flushes not supported
/dev/ide/host2/bus0/target0/lun0: p1 p2 < p5 >
hdh: max request size: 128KiB
hdh: Host Protected Area detected.
current capacity is 66055248 sectors (33820 MB)
native capacity is 80293248 sectors (41110 MB)
hdh: Host Protected Area disabled.
hdh: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdh: cache flushes supported
/dev/ide/host2/bus1/target1/lun0: p1
hdb: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.10 loaded.
ieee1394: raw1394: /dev/raw1394 device initialized
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:04.2[D] -> GSI 6 (level, low) -> IRQ 6
uhci_hcd 0000:00:04.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
irq 6: nobody cared!
[<c013aeaa>] __report_bad_irq+0x2a/0x90
[<c013a820>] handle_IRQ_event+0x30/0x70
[<c013af9c>] note_interrupt+0x6c/0xd0
[<c013a990>] __do_IRQ+0x130/0x160
[<c01056c6>] do_IRQ+0x46/0x70
=======================
[<c0103b7e>] common_interrupt+0x1a/0x20
[<c012194d>] __do_softirq+0x4d/0xd0
[<c01057da>] do_softirq+0x4a/0x60
=======================
[<c013a7e9>] irq_exit+0x39/0x40
[<c01056cd>] do_IRQ+0x4d/0x70
[<c0103b7e>] common_interrupt+0x1a/0x20
[<c03f9165>] _spin_unlock_irqrestore+0x5/0x20
[<c013ac61>] setup_irq+0xa1/0x100
[<c031bef0>] usb_hcd_irq+0x0/0x70
[<c013ae44>] request_irq+0x84/0xc0
[<c032020e>] usb_hcd_pci_probe+0x20e/0x520
[<c031bef0>] usb_hcd_irq+0x0/0x70
[<c02515f2>] pci_device_probe_static+0x52/0x70
[<c025164c>] __pci_device_probe+0x3c/0x50
[<c025168c>] pci_device_probe+0x2c/0x50
[<c02ac9ef>] driver_probe_device+0x2f/0x80
[<c02acb39>] driver_attach+0x59/0x90
[<c02ad009>] bus_add_driver+0x99/0xd0
[<c0251922>] pci_register_driver+0x72/0x90
[<c0543244>] uhci_hcd_init+0xc4/0x130
[<c05259bb>] do_initcalls+0x2b/0xc0
[<c010053a>] init+0x7a/0x190
[<c01004c0>] init+0x0/0x190
[<c01012d1>] kernel_thread_helper+0x5/0x14
handlers:
[<c031bef0>] (usb_hcd_irq+0x0/0x70)
Disabling IRQ #6
uhci_hcd 0000:00:04.2: irq 6, io base 0xd400
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:04.3[D] -> GSI 6 (level, low) -> IRQ 6
uhci_hcd 0000:00:04.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:04.3: irq 6, io base 0xd000
uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
uhci_hcd 0000:00:04.2: Unlink after no-IRQ? Different ACPI or APIC settings may help.
usb 1-2: khubd timed out on ep0in
usb 1-2: khubd timed out on ep0out
usb 1-2: khubd timed out on ep0out
usb 1-2: device not accepting address 2, error -110
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: khubd timed out on ep0in
usb 1-2: khubd timed out on ep0out
usb 1-2: khubd timed out on ep0out
usb 1-2: device not accepting address 3, error -110
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usb 2-2: new full speed USB device using uhci_hcd and address 2
uhci_hcd 0000:00:04.3: Unlink after no-IRQ? Different ACPI or APIC settings may help.
usb 2-2: khubd timed out on ep0in
usb 2-2: khubd timed out on ep0out
usb 2-2: khubd timed out on ep0out
usb 2-2: device not accepting address 2, error -110
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: khubd timed out on ep0in
usb 2-2: khubd timed out on ep0out
usb 2-2: khubd timed out on ep0out
usb 2-2: device not accepting address 3, error -110
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
i2c /dev entries driver
Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC).
ALSA device list:
No soundcards found.
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 304 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
PCI0 UAR1 UAR2 USB0 USB1
ACPI: (supports S0 S1 S4 S5)
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: journal-1153: found in header: first_unflushed_offset 2609, last_flushed_trans_id 25449
ReiserFS: hda3: journal-1206: Starting replay from offset 109306917685809, trans_id 0
ReiserFS: hda3: journal-1299: Setting newest_mount_id to 21
ReiserFS: hda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 220k freed
Adding 500464k swap on /dev/hda2. Priority:-1 extents:1
ReiserFS: hda3: Removing [159 390919 0x0 SD]..done
ReiserFS: hda3: There were 1 uncompleted unlinks/truncates. Completed
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
drivers/media/dvb/b2c2/skystar2.c: FlexCopII(rev.130) chip found
drivers/media/dvb/b2c2/skystar2.c: the chip has 6 hardware filters
DVB: registering new adapter (SkyStar2).
DVB: registering frontend 0 (ST STV0299 DVB-S)...
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11
em8300: EM8300 8300 (rev 2) bus: 0, devfn: 96, irq: 11, memory: 0xde800000.
em8300: mapped-memory at 0xe0b00000
em8300: using MTRR
em8300_main.o: Chip revision: 2
flexcop_i2c_func
bt865.o: BT865 chip detected
bt865.o: Defaulting to PAL
bt865.o: Configuring for PAL
flexcop_i2c_func
flexcop_i2c_func
flexcop_i2c_func
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
bt865.o: Configuring for PAL
em8300_audio.o: Analog audio enabled
em8300: Microcode version 0x29 loaded
dvb_frontend_stop: thread PID 17 already died
bt865.o: Configuring for PAL
em8300_audio.o: Analog audio enabled
em8300: Microcode version 0x29 loaded
bt865.o: Configuring for PAL
em8300_audio.o: Analog audio enabled
|
|
|
| Back to top |
|
|
Voltago
Advocate
Joined: 02 Sep 2003
Posts: 2593
Location: userland
|
| Posted: Sun Mar 06, 2005 9:45 pm Post subject: |
|
|
| Das ist jetzt ein Schuß ins Blaue, aber probier mal die Kerneloption 'pci=routeirq' wegzulassen, und wenn das noch nix hilft, die Kerneloption 'lapic' dazuzunehmen. |
|
| Back to top |
|
|
pinguin45
n00b
Joined: 30 Nov 2004
Posts: 49
|
| Posted: Sun Mar 06, 2005 9:48 pm Post subject: |
|
|
Danke hast mir sehr weiter geholfen ich hab mal im bios die irq fest verzuhrt und schon gehts wieder *freu*
thx |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
