| View previous topic :: View next topic |
| Author |
Message |
seryna
n00b
Joined: 27 Jan 2005
Posts: 36
|
 Posted: Tue Mar 01, 2005 9:56 am Post subject: [Config] problema Gnokii |
 |
|
Ciao,
ho collegato un nokia 6150 con cavo seriale al mio portatile. Questa è la configurazione (spero sia giusta)
| Code: |
[global]
# Set port to the physical serial port used to connect to your phone.
# Linux version is:
port = /dev/ttyS0
# Set model to the model number of your phone
model = 6150
# Initlength controls the number of characters sent to the
# phone during initialisation. You can either set it to
# the word "default" or a positive integer.
#
# You can try setting this value if you want to connect
# to the phone quicker. If you've never noticed the
# connection to be slow, it is suggested that you
# leave this alone. Read the initialisation code in fbus-xxxx
# to understand what this changes if you're curious.
initlength = default
# The type of the connection, for IR set this to infrared or irda.
# For the nk6110 driver only infrared is valid for the IrDA connection.
# See Docs/gnokii-ir-howto for more detailes on this.
# If you have 6210/6250/7110 phone and dau9p cable (the one you can
# use with 6100 series and cannot use hardware modem from the phone)
# you may want to use 'dau9p' value to get faster initialization.
# If you use dlr3 or dlr3p cable for nokia phones in FBUS mode (ie.
# you don't use model = AT) you may want to use 'dlr3p' value here.
# Note that it is recommended and currently the best way to use this
# cable with nk6510 driver.
connection = serial
# Set this to 'yes' if you want gnokii to set and check the lock file in
# /var/lock directory. It avoids potential conflicts with other serial
# port software (eg. minicom). If you have wrong permissions for the
# directory, a warning will be generated. If you don't want a lockfile, set
# it to 'no'.
use_locking = yes
# Baudrate to use on serial port connections.
# Currently used only by models AT and BIP/CIMD. Defaults to 19200.
serial_baudrate = 19200
# When sending SMS you can experience timeouts. This is the feature of the
# overloaded SMSCs. The phones waits for the response from the SMSC confirming
# that it received the short message. When the SMSC is DoSed with many requests
# it will take more time to get the response. Adjust it to your needs. The
# value is given in seconds to wait. Defaults to 10 seconds. Set to 0 to wait
# forever.
smsc_timeout = 10
# Set bindir to point to the location of the various gnokiid binaries.
# In particular ensure that mgnokiidev is in this location, with
# permissions 4750, owned by root, group gnokii. Ensure you
# are in the gnokii group and that the group exists...
[gnokiid]
bindir = /usr/sbin/
# Any entries in the following two sections will be set as environment
# variables when running the scripts.
# Handy for use for $VAR substitutions in your chat(8) script.
[connect_script]
TELEPHONE = 12345678
[disconnect_script]
# The following parameters control how libgnokii handle the debugging messages.
# Currently there are three categories: "debug" controls the libgnokii
# normal debug output, "rlpdebug" controls the debug output of the RLP
# subsystem, and "xdebug" is used by the xgnokii or smsd.
[logging]
# where to log the debug output (on: stderr)
debug = on
# where to log the rlp debug output (on: stderr)
rlpdebug = off
# where to log X debug output (on: stderr)
xdebug = off
|
mi dà questo errore:
| Code: |
bash-2.05b$ xgnokii
LOG: debug mask is 0x1
phone instance config:
model: 6150
port_device: /dev/ttyS0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
Serial device: opening device /dev/ttyS0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Message sent: 0x40 / 0x0004
00 01 64 01 | d
SM_Block Retry - 0
Message sent: 0x40 / 0x0004
00 01 64 01 | d
SM_Block Retry - 1
Message sent: 0x40 / 0x0004
00 01 64 01 | d
Message sent: 0x40 / 0x0004
00 01 64 01 | d
SM_Block Retry - 0
Message sent: 0x40 / 0x0004
00 01 64 01 | d
SM_Block Retry - 1
Message sent: 0x40 / 0x0004
00 01 64 01 | d
Message sent: 0x40 / 0x0004
00 01 64 01 | d
SM_Block Retry - 0
Message sent: 0x40 / 0x0004
00 01 64 01 | d
SM_Block Retry - 1
Message sent: 0x40 / 0x0004
00 01 64 01 | d
GSM/FBUS init failed!
|
potete aiutarmi? |
|
| Back to top |
|
 |
[hammerfall]
Apprentice
Joined: 27 May 2004
Posts: 243
|
| Posted: Tue Mar 01, 2005 10:19 am Post subject: |
|
|
preso dal file config che tu hai appena postato
| Code: | # If you use dlr3 or dlr3p cable for nokia phones in FBUS mode (ie.
# you don't use model = AT) you may want to use 'dlr3p' value here.
# Note that it is recommended and currently the best way to use this
# cable with nk6510 driver.
connection = serial |
Cosi' a occhio pare che suggerisca di usare
con il tuo modello di cellulare..
_________________
--------
Hammerfall ^_^ |
|
| Back to top |
|
|
seryna
n00b
Joined: 27 Jan 2005
Posts: 36
|
| Posted: Tue Mar 01, 2005 10:24 am Post subject: |
|
|
se cambio quella stringa mi dice:
| Code: |
LOG: debug mask is 0x1
Lockfile /var/lock/LCK..ttyS0 is stale. Overriding it..
phone instance config:
model: 6150
port_device: /dev/ttyS0
connection_type: 2
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
GSM/FBUS init failed! |
eppure la stringa dovrebbe essere giusta perchè sul cavetto seriale c'è scritto "Nokia type: dlr-3p" |
|
| Back to top |
|
|
seryna
n00b
Joined: 27 Jan 2005
Posts: 36
|
| Posted: Wed Mar 02, 2005 10:57 am Post subject: |
|
|
Ho provato a farlo andare con windows, per vedere se poteva essere il cavo. Ho scoperto che era il cellulare a non andare bene per il cavo. Ora ho collegato un nokia 6210 con un cavo DLR-3P. In windows funziona.
In gentoo: modificato il file .gnokiirc. Dato comando $xgnokii
| Code: |
LOG: debug mask is 0x1
phone instance config:
model: 6210
port_device: /dev/ttyS0
connection_type: 2
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
Connecting
Serial device: opening device /dev/ttyS0
Gnokii serial_open: open: Permission denied
Couldn't open FBUS device: Permission denied
Error in link initialisation: 1
Serial device: opening device /dev/ttyS0
Gnokii serial_open: open: Permission denied
Couldn't open FBUS device: Permission denied
Error in link initialisation: 1
Error in link initialisation: 1
GSM/FBUS init failed!
|
Dov'è che sbaglio adesso? Perchè mi dice "permission denied"? |
|
| Back to top |
|
|
randomaze
Bodhisattva
Joined: 21 Oct 2003
Posts: 9985
|
| Posted: Wed Mar 02, 2005 2:09 pm Post subject: |
|
|
| seryna wrote: | Serial device: opening device /dev/ttyS0
Gnokii serial_open: open: Permission denied
Couldn't open FBUS device: Permission denied
...
Dov'è che sbaglio adesso? Perchè mi dice "permission denied"? |
Probabilmente perché il file indicato non ha i permessi adatti al tuo utente.
_________________
Ciao da me! |
|
| Back to top |
|
|
[hammerfall]
Apprentice
Joined: 27 May 2004
Posts: 243
|
| Posted: Thu Mar 03, 2005 11:10 am Post subject: |
|
|
per fare una prova veloce prova a ripetere l'operazione da utente root, se funziona allora dovrai cambiare i permessi al device della seriale cosi' che l'utente normale possa accederci..
_________________
--------
Hammerfall ^_^ |
|
| Back to top |
|
|
|
Forum italiano (Italian)
