| View previous topic :: View next topic |
| Author |
Message |
conri
n00b
Joined: 06 Mar 2005
Posts: 14
Location: Germany
|
 Posted: Sun Mar 06, 2005 3:51 pm Post subject: System crashes when using 3D (Xorg and DRI problem) |
 |
|
Hi,
I replaced XFree with Xorg. After that replacement all 3D games don't work anymore. Tuxracer will crash every time I start it.
I'm using a Matrox G400.
I installed DRI like described in the DRI-How-To. Before I switched to Xorg everything worked fine.
Some information:
2.4.26-gentoo-r14
i686 AMD Athlon(tm) Processor AuthenticAMD GNU/Linux
Xorg-X11 installed: xorg-x11-6.8.0-r4
Kernel is configured as required (DRI-HowTo).
glxgears is running quite well, no problems with that.
Only the games chrashes. After starting Tuxracer it will crash and I can't use my machine anymore until I reset the pc. No reactions on any input.
Tuxracer gives some errors:
| Code: |
Tux Racer 0.61 -- a Sunspire Studios Production (http://www.sunspirestudios.com)
(c) 1999-2000 Jasmin F. Patry <jfpatry@sunspirestudios.com>
"Tux Racer" is a trademark of Jasmin F. Patry
Tux Racer comes with ABSOLUTELY NO WARRANTY. This is free software,
and you are welcome to redistribute it under certain conditions.
See http://www.gnu.org/copyleft/gpl.html for details.
libGL warning: 3D driver claims to not support visual 0x23
libGL warning: 3D driver claims to not support visual 0x24
libGL warning: 3D driver claims to not support visual 0x27
libGL warning: 3D driver claims to not support visual 0x28
libGL warning: 3D driver claims to not support visual 0x2b
libGL warning: 3D driver claims to not support visual 0x2c
libGL warning: 3D driver claims to not support visual 0x2f
libGL warning: 3D driver claims to not support visual 0x30
|
Here are the logs:
| Code: |
$ dmesg | grep drm
[drm] Initialized mga 3.1.0 20021029 on minor 0: Matrox G400/G450 (AGP)
|
Xorg-Log (not all lines included, I erased some):
| Code: |
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/sam.middleearth.de:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X Window System Version 6.8.0
Release Date: 8 September 2004
X Protocol Version 11, Revision 0, Release 6.8
Build Operating System: Linux 2.4.26-gentoo-r14 i686 [ELF]
Current Operating System: Linux sam.middleearth.de 2.4.26-gentoo-r14 #1 Fr Feb 11 15:54:51 MET 2005 i686
Build Date: 11 February 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 6 16:12:26 2005
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/share/fonts/CID/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/"
(**) RgbPath set to "/usr/lib/X11/rgb"
(**) ModulePath set to "/usr/lib/modules"
(II) Open APM successful
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80002050, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0305 card 1043,8033 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8305 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:04:0: chip 1106,0686 card 1043,8033 rev 22 class 06,01,00 hdr 80
(II) PCI: 00:04:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a hdr 00
(II) PCI: 00:04:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:04:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:04:4: chip 1106,3057 card 0000,0000 rev 30 class 06,00,00 hdr 00
(II) PCI: 00:0b:0: chip 1186,1300 card 1186,1303 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:0d:0: chip 1274,5880 card 1274,2000 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:11:0: chip 105a,0d30 card 105a,4d33 rev 02 class 01,80,00 hdr 00
(II) PCI: 01:00:0: chip 102b,0525 card 102b,19d8 rev 04 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe0800000 - 0xe1dfffff (0x1600000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe1f00000 - 0xe3ffffff (0x2100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:4:4), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) Matrox Graphics, Inc. MGA G400 AGP rev 4, Mem @ 0xe2000000/25, 0xe1000000/14, 0xe0800000/23, BIOS @ 0xe1ff0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe4000000 from 0xe7ffffff to 0xe3ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xdf800000 - 0xdf81ffff (0x20000) MX[B]
[1] -1 0 0xe0000000 - 0xe00000ff (0x100) MX[B]
[2] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[3] -1 0 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[4] -1 0 0xe0800000 - 0xe0ffffff (0x800000) MX[B](B)
[5] -1 0 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
[6] -1 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[7] -1 0 0x00008400 - 0x0000843f (0x40) IX[B]
[8] -1 0 0x00008800 - 0x00008803 (0x4) IX[B]
[9] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[10] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[11] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[12] -1 0 0x0000a000 - 0x0000a03f (0x40) IX[B]
[13] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[14] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[15] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdf800000 - 0xdf81ffff (0x20000) MX[B]
[1] -1 0 0xe0000000 - 0xe00000ff (0x100) MX[B]
[2] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[3] -1 0 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[4] -1 0 0xe0800000 - 0xe0ffffff (0x800000) MX[B](B)
[5] -1 0 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
[6] -1 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[7] -1 0 0x00008400 - 0x0000843f (0x40) IX[B]
[8] -1 0 0x00008800 - 0x00008803 (0x4) IX[B]
[9] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[10] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[11] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[12] -1 0 0x0000a000 - 0x0000a03f (0x40) IX[B]
[13] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[14] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[15] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdf800000 - 0xdf81ffff (0x20000) MX[B]
[6] -1 0 0xe0000000 - 0xe00000ff (0x100) MX[B]
[7] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[8] -1 0 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[9] -1 0 0xe0800000 - 0xe0ffffff (0x800000) MX[B](B)
[10] -1 0 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
[11] -1 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00008400 - 0x0000843f (0x40) IX[B]
[15] -1 0 0x00008800 - 0x00008803 (0x4) IX[B]
[16] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[17] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[18] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[19] -1 0 0x0000a000 - 0x0000a03f (0x40) IX[B]
[20] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[21] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[22] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[23] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
(II) LoadModule: "record"
(II) Loading /usr/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "freetype"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "mga"
(II) Loading /usr/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
mgag550
(II) Primary Device is: PCI 01:00:0
(--) Chipset mgag400 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdf800000 - 0xdf81ffff (0x20000) MX[B]
[6] -1 0 0xe0000000 - 0xe00000ff (0x100) MX[B]
[7] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[8] -1 0 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[9] -1 0 0xe0800000 - 0xe0ffffff (0x800000) MX[B](B)
[10] -1 0 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
[11] -1 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00008400 - 0x0000843f (0x40) IX[B]
[15] -1 0 0x00008800 - 0x00008803 (0x4) IX[B]
[16] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[17] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[18] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[19] -1 0 0x0000a000 - 0x0000a03f (0x40) IX[B]
[20] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[21] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[22] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[23] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdf800000 - 0xdf81ffff (0x20000) MX[B]
[6] -1 0 0xe0000000 - 0xe00000ff (0x100) MX[B]
[7] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[8] -1 0 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[9] -1 0 0xe0800000 - 0xe0ffffff (0x800000) MX[B](B)
[10] -1 0 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
[11] -1 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00008400 - 0x0000843f (0x40) IX[B]
[18] -1 0 0x00008800 - 0x00008803 (0x4) IX[B]
[19] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[20] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[21] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[22] -1 0 0x0000a000 - 0x0000a03f (0x40) IX[B]
[23] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[24] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[25] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[26] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(--) MGA(0): Chipset: "mgag400" (G400)
(**) MGA(0): Depth 24, (--) framebuffer bpp 32
(==) MGA(0): RGB weight 888
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xE2000000
(--) MGA(0): MMIO registers at 0xE1000000
(--) MGA(0): Pseudo-DMA transfer window at 0xE0800000
(--) MGA(0): BIOS at 0xE1FF0000
(II) Truncating PCI BIOS Length to 32768
(--) MGA(0): Video BIOS info block at offset 0x07CE0
(WW) MGA(0): Video BIOS info block not detected!
(II) MGA(0): MGABios.RamdacType = 0x0
(==) MGA(0): Write-combining range (0xe2000000,0x2000000)
(--) MGA(0): VideoRAM: 16384 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(==) MGA(0): Write-combining range (0xe2000000,0x1000000)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) MGA(0): I2C bus "DDC P1" initialized.
(II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
(II) MGA(0): I2C device "DDC P1:ddc2" removed.
(II) MGA(0): I2C Monitor info: (nil)
(II) MGA(0): end of I2C Monitor info
(--) MGA(0): No DDC signal
(II) MGA(0): DDC Monitor info: (nil)
(II) MGA(0): end of DDC Monitor info
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) MGA(0): initializing int10
(II) MGA(0): Primary V_BIOS segment is: 0xc000
(II) MGA(0): VESA BIOS detected
(II) MGA(0): VESA VBE Version 3.0
(II) MGA(0): VESA VBE Total Mem: 16384 kB
(II) MGA(0): VESA VBE OEM: Matrox Graphics Inc.
(II) MGA(0): VESA VBE OEM Software Rev: 2.1
(II) MGA(0): VESA VBE OEM Vendor: Matrox
(II) MGA(0): VESA VBE OEM Product: Matrox G400
(II) MGA(0): VESA VBE OEM Product Rev: 00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/modules/libddc.a
(II) MGA(0): VESA VBE DDC supported
(II) MGA(0): VESA VBE DDC Level 2
(II) MGA(0): VESA VBE DDC transfer in appr. 1 sec.
(II) MGA(0): VESA VBE DDC read successfully
(II) MGA(0): VBE DDC Monitor info: 0x86c68a0
(II) MGA(0): Manufacturer: IVM Model: 1901 Serial#: 0
(II) MGA(0): Year: 2000 Week: 24
(II) MGA(0): EDID Version: 1.1
(II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) MGA(0): Sync: Separate Composite SyncOnGreen
(II) MGA(0): Max H-Image Size [cm]: horiz.: 36 vert.: 27
(II) MGA(0): Gamma: 2.10
(II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) MGA(0): redX: 0.625 redY: 0.340 greenX: 0.290 greenY: 0.605
(II) MGA(0): blueX: 0.149 blueY: 0.016 whiteX: 0.283 whiteY: 0.297
(II) MGA(0): Supported VESA Video Modes:
(II) MGA(0): 640x480@60Hz
(II) MGA(0): 640x480@67Hz
(II) MGA(0): 640x480@72Hz
(II) MGA(0): 640x480@75Hz
(II) MGA(0): 800x600@56Hz
(II) MGA(0): 800x600@60Hz
(II) MGA(0): 800x600@72Hz
(II) MGA(0): 800x600@75Hz
(II) MGA(0): 832x624@75Hz
(II) MGA(0): 1024x768@60Hz
(II) MGA(0): 1024x768@70Hz
(II) MGA(0): 1024x768@75Hz
(II) MGA(0): 1280x1024@75Hz
(II) MGA(0): 1152x870@75Hz
(II) MGA(0): Manufacturer's mask: 7E
(II) MGA(0): Supported Future Video Modes:
(II) MGA(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) MGA(0): #1: hsize: 1600 vsize 1200 refresh: 70 vid: 19113
(II) MGA(0): #2: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) MGA(0): #3: hsize: 1600 vsize 1200 refresh: 85 vid: 22953
(II) MGA(0):
(II) MGA(0):
(II) MGA(0):
(II) MGA(0):
(II) MGA(0): end of VBE DDC Monitor info
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 300 MHz
(WW) MGA(0): config file hsync range 31-115kHz not within DDC hsync ranges.
(WW) MGA(0): config file hsync range 0-0kHz not within DDC hsync ranges.
(WW) MGA(0): config file hsync range 0-0kHz not within DDC hsync ranges.
(WW) MGA(0): config file hsync range 0-0kHz not within DDC hsync ranges.
(WW) MGA(0): config file vrefresh range 50-150Hz not within DDC vrefresh ranges.
(--) MGA(0): Virtual size is 1280x1024 (pitch 1280)
(**) MGA(0): *Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(**) MGA(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) MGA(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync
(--) MGA(0): Display dimensions: (360, 270) mm
(--) MGA(0): DPI set to (90, 96)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe0800000 - 0xe0ffffff (0x800000) MX[B]
[1] 0 0 0xe1000000 - 0xe1003fff (0x4000) MX[B]
[2] 0 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B]
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xdf800000 - 0xdf81ffff (0x20000) MX[B]
[9] -1 0 0xe0000000 - 0xe00000ff (0x100) MX[B]
[10] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[11] -1 0 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[12] -1 0 0xe0800000 - 0xe0ffffff (0x800000) MX[B](B)
[13] -1 0 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
[14] -1 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00008400 - 0x0000843f (0x40) IX[B]
[21] -1 0 0x00008800 - 0x00008803 (0x4) IX[B]
[22] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[23] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[24] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[25] -1 0 0x0000a000 - 0x0000a03f (0x40) IX[B]
[26] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[27] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[28] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[29] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[31] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) MGA(0): Write-combining range (0xe2000000,0x1000000)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 32 depth: 24
(II) MGA(0): [drm] Sarea 2200+664: 2864
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) MGA(0): [drm] DRM interface version 1.2
(II) MGA(0): [drm] created "mga" driver at busid "pci:0000:01:00.0"
(II) MGA(0): [drm] added 8192 byte SAREA at 0xe0c37000
(II) MGA(0): [drm] mapped SAREA 0xe0c37000 to 0x40028000
(II) MGA(0): [drm] framebuffer handle = 0xe2000000
(II) MGA(0): [drm] added 1 reserved context for kernel
(II) MGA(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x0305; Card 0x102b/0x0525]
(II) MGA(0): [agp] 12288 kB allocated with handle 0x00000001
(II) MGA(0): [agp] WARP microcode handle = 0xe4000000
(II) MGA(0): [agp] WARP microcode mapped at 0x4002a000
(II) MGA(0): [agp] Primary DMA handle = 0xe4008000
(II) MGA(0): [agp] Primary DMA mapped at 0x41a98000
(II) MGA(0): [agp] DMA buffers handle = 0xe4108000
(II) MGA(0): [agp] DMA buffers mapped at 0x41b98000
(II) MGA(0): [drm] Added 128 65536 byte DMA buffers
(II) MGA(0): [agp] agpTexture handle = 0xe4908000
(II) MGA(0): [agp] agpTexture size: 2816 kb
(II) MGA(0): [drm] Registers handle = 0xe1000000
(II) MGA(0): [drm] Status handle = 0xe1c44000
(II) MGA(0): [agp] Status page mapped at 0x40032000
(II) MGA(0): [dri] visual configs initialized
(II) MGA(0): Memory manager initialized to (0,0) (1280,1227)
(II) MGA(0): Largest offscreen area available: 1280 x 203
(II) MGA(0): Reserved back buffer at offset 0x600000
(II) MGA(0): Reserved depth buffer at offset 0xb00000
(II) MGA(0): Reserved 0 kb for textures at offset 0x1000000
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Driver provided FillMono8x8PatternRects replacement
Setting up tile and stipple cache:
10 128x128 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(II) MGA(0): Using overlay video
(II) MGA(0): X context handle = 0x00000001
(II) MGA(0): [drm] installed DRM signal handler
(II) MGA(0): [DRI] installation complete
(II) MGA(0): [drm] Mapped 128 DMA buffers
(II) MGA(0): [drm] dma control initialized, using IRQ 11
(==) MGA(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/mouse"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(**) Mouse0: SmartScroll: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Keyboard0: XkbLayout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) Keyboard0: XkbVariant: "nodeadkeys"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
GetModeLine - scrn: 0 clock: 157500
GetModeLine - hdsp: 1280 hbeg: 1344 hend: 1504 httl: 1728
vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1072 flags: 5
GetModeLine - scrn: 0 clock: 157500
GetModeLine - hdsp: 1280 hbeg: 1344 hend: 1504 httl: 1728
vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1072 flags: 5
(II) 3rd Button detected: disabling emulate3Button
|
Some pieces of XF86config:
| Code: |
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "glx"
Load "dri"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "Device"
Identifier "Card0"
Driver "mga"
VendorName "Matrox Graphics, Inc."
BoardName "MGA G400 AGP"
BusID "PCI:1:0:0"
EndSection
Section "DRI"
Mode 0666
EndSection
|
Driver for Matrox G400 loaded?
| Code: |
$ lsmod | grep mga
mga 99072 1
|
GLXInfo gives some strange lines:
| Code: |
$ glxinfo
name of display: :0.0
libGL warning: 3D driver claims to not support visual 0x23
libGL warning: 3D driver claims to not support visual 0x24
libGL warning: 3D driver claims to not support visual 0x27
libGL warning: 3D driver claims to not support visual 0x28
libGL warning: 3D driver claims to not support visual 0x2b
libGL warning: 3D driver claims to not support visual 0x2c
libGL warning: 3D driver claims to not support visual 0x2f
libGL warning: 3D driver claims to not support visual 0x30
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig
OpenGL vendor string: VA Linux Systems Inc.
OpenGL renderer string: Mesa DRI G400 20030328 AGP 1x x86/MMX+/3DNow!+
OpenGL version string: 1.2 Mesa 6.1
OpenGL extensions:
GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_texture_compression,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_transpose_matrix, GL_ARB_window_pos,
GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_logic_op, GL_EXT_clip_volume_hint,
GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_packed_pixels,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_texture_env_combine3, GL_IBM_rasterpos_clip, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_light_max_exponent, GL_NV_texture_rectangle,
GL_NV_texgen_reflection, GL_SGIS_generate_mipmap,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x25 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x26 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x27 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 16 16 16 0 0 0 Slow
0x28 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 16 16 16 0 0 0 Slow
0x29 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x2a 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x2b 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x2c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x2d 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x2e 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x2f 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 16 16 16 0 0 0 Slow
0x30 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 16 16 16 0 0 0 Slow
0x31 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x32 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
|
Some more information:
| Code: |
lspci | grep AGP
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04)
|
Would be great if anyone could help me...
Thanx a lot!
Richard |
|
| Back to top |
|
 |
mascanho
Veteran
Joined: 21 Dec 2004
Posts: 1241
Location: On my Bmx Bike on a Concrete Park Flatlanding ...
|
| Posted: Fri Mar 11, 2005 6:38 pm Post subject: |
|
|
try #Dri on xorg.conf
_________________
Flatland Life is a Choice !
emerge avatar |
|
| Back to top |
|
|
conri
n00b
Joined: 06 Mar 2005
Posts: 14
Location: Germany
|
| Posted: Fri Mar 11, 2005 8:17 pm Post subject: |
|
|
Thanx.
Without the DRI-Module Tuxracer will start but it's very, very slow. Also glxgears is very slow. So this can't be the solution for my problem.
There must be something wrong elsewhere... With Xfree it worked fine. With Xorg the 3D-full-screen games will crash every time I start them.
But thanx again for your help.
Richard |
|
| Back to top |
|
|
mascanho
Veteran
Joined: 21 Dec 2004
Posts: 1241
Location: On my Bmx Bike on a Concrete Park Flatlanding ...
|
| Posted: Fri Mar 11, 2005 11:01 pm Post subject: |
|
|
hum ... your xorg.conf is kind a weird ....
http://mascanho.no.sapo.pt/dots/xorg.conf.html check mine out this is what i got to have 3d aceleration on my nvidia it works great maybe you should have a look.
_________________
Flatland Life is a Choice !
emerge avatar |
|
| Back to top |
|
|
Morimando
Guru
Joined: 14 Feb 2005
Posts: 339
Location: Germany
|
| Posted: Sat Mar 12, 2005 12:06 am Post subject: |
|
|
uhm you have disabled that DRM/DRI thing in kernel? cause it's causing problems with xorg.
Have you done opengl-update <insert driver> ? If not it uses the X11 gl-drivers, which is kind of bad 
_________________
That young girl is one of the least benightedly unintelligent organic life forms it has been my profound lack of pleasure not to be able to avoid meeting.
-- Marvin |
|
| Back to top |
|
|
Morimando
Guru
Joined: 14 Feb 2005
Posts: 339
Location: Germany
|
| Posted: Sat Mar 12, 2005 12:08 am Post subject: |
|
|
erm by the way.. should it be xorg.conf rather than xfree86.conf?
My xorg.conf is as follows (Nvidia) :
| Code: | Section "Device"
BoardName "GeForce FX5600"
Identifier "Device[0]"
Driver "nvidia"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Option "TwinView" "true"
Option "MetaModes" "1024x768,1024x768"
Screen 0
Option "NvAGP" "2"
VendorName "NVidia"
Option "Composite" "Enable"
Option "RenderAccel" "true"
Option "Xinerama" "on"
Option "AGPMode" "8"
Option "AGPFastWrite" "True"
Option "EnablePageFlip" "True"
Option "TwinViewOrientation" "RightOf"
Option "ConnectedMonitor" "CRT,CRT"
Option "SecondMonitorHorizSync" "30-69"
Option "SecondMonitorVertRefresh" "50-160"
EndSection |
_________________
That young girl is one of the least benightedly unintelligent organic life forms it has been my profound lack of pleasure not to be able to avoid meeting.
-- Marvin |
|
| Back to top |
|
|
conri
n00b
Joined: 06 Mar 2005
Posts: 14
Location: Germany
|
| Posted: Sat Mar 12, 2005 11:13 am Post subject: |
|
|
Hi,
thanx for your answers!
I checked my config-file again. Everything seems to be ok. The config file was generated by Xorg, so it shouldn't be wrong.
The log file says that Xorg reads the XF86Config (see above or at the following two lines). So the differnet name shouldn't be the problem.
| Code: |
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 6 16:12:26 2005
(==) Using config file: "/etc/X11/XF86Config"
|
I checked again for DRI settings within the kernel. No DRI settings done. I went through the DRI-Howto at minimum 10 times.
I don't understand the problem... Is there anything known to Xorg / mga (matrox) problems? As soon as I try to start a full screen game the X server chrashes. Everything you can play in a window won't crash. Whats going on???
Thanx again!
Richard |
|
| Back to top |
|
|
mascanho
Veteran
Joined: 21 Dec 2004
Posts: 1241
Location: On my Bmx Bike on a Concrete Park Flatlanding ...
|
| Posted: Sat Mar 12, 2005 11:54 am Post subject: |
|
|
Hum... Try Desabling agpgart on your kernel, some say that with new kernel and new drivers you dont need that on your kernel giv it a try
_________________
Flatland Life is a Choice !
emerge avatar |
|
| Back to top |
|
|
mascanho
Veteran
Joined: 21 Dec 2004
Posts: 1241
Location: On my Bmx Bike on a Concrete Park Flatlanding ...
|
| Posted: Sat Mar 12, 2005 11:56 am Post subject: |
|
|
@ Morimando | Quote: | | whats the result of your glxgears ? |
_________________
Flatland Life is a Choice !
emerge avatar |
|
| Back to top |
|
|
conri
n00b
Joined: 06 Mar 2005
Posts: 14
Location: Germany
|
| Posted: Sat Mar 12, 2005 3:40 pm Post subject: |
|
|
These are my results of glxgears. Strange again: the libGL warnings (see tuxracer output).
| Code: |
libGL warning: 3D driver claims to not support visual 0x23
libGL warning: 3D driver claims to not support visual 0x24
libGL warning: 3D driver claims to not support visual 0x27
libGL warning: 3D driver claims to not support visual 0x28
libGL warning: 3D driver claims to not support visual 0x2b
libGL warning: 3D driver claims to not support visual 0x2c
libGL warning: 3D driver claims to not support visual 0x2f
libGL warning: 3D driver claims to not support visual 0x30
2016 frames in 5.0 seconds = 403.200 FPS
2323 frames in 5.0 seconds = 464.600 FPS
|
Without DRI it will be around 160 FPS.
Currently I compile my kernel with agpgart as a module. Later I will try running the system without it. Thanx.
Here my complete XF86Config (due to the replies of yours):
| Code: |
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "glx"
Load "dri"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
Option "Device" "/dev/misc/psaux"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
#DisplaySize 360 270 # mm
Identifier "Monitor0"
VendorName "IVM"
ModelName "450"
HorizSync 31.0 -115
HorizSync 0.0 - 0.0
HorizSync 0.0 - 0.0
HorizSync 0.0 - 0.0
VertRefresh 50.0 - 150.0
# Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "PciRetry" # [<bool>]
#Option "SyncOnGreen" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "Overlay" # [<str>]
#Option "MGASDRAM" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "ColorKey" # <i>
#Option "SetMclk" # <freq>
#Option "OverclockMem" # [<bool>]
#Option "VideoKey" # <i>
#Option "Rotate" # [<str>]
#Option "TexturedVideo" # [<bool>]
#Option "Crtc2Half" # [<bool>]
#Option "Crtc2Ram" # <i>
#Option "Int10" # [<bool>]
#Option "AGPMode" # <i>
#Option "AGPSize" # <i>
#Option "DigitalScreen1" # [<bool>]
#Option "DigitalScreen2" # [<bool>]
#Option "TV" # [<bool>]
#Option "TVStandard" # [<str>]
#Option "CableType" # [<str>]
#Option "NoHal" # [<bool>]
#Option "SwappedHead" # [<bool>]
#Option "DRI" # [<bool>]
#Option "MergedFB" # [<bool>]
#Option "Monitor2HSync" # [<str>]
#Option "Monitor2VRefresh" # [<str>]
#Option "Monitor2Position" # [<str>]
#Option "MetaModes" # [<str>]
Identifier "Card0"
Driver "mga"
VendorName "Matrox Graphics, Inc."
BoardName "MGA G400 AGP"
BusID "PCI:1:0:0"
Option "Composite" "Enable"
Option "RenderAccel" "true"
# Option "Xinerama" "on"
# Option "AGPMode" "8"
# Option "AGPFastWrite" "True"
# Option "EnablePageFlip" "True"
# Option "TwinViewOrientation" "RightOf"
# Option "ConnectedMonitor" "CRT,CRT"
# Option "SecondMonitorHorizSync" "30-69"
# Option "SecondMonitorVertRefresh" "50-160"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24 # Richi
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
|
|
|
| Back to top |
|
|
conri
n00b
Joined: 06 Mar 2005
Posts: 14
Location: Germany
|
| Posted: Sat Mar 12, 2005 4:18 pm Post subject: |
|
|
I tried it with agpgart as a module. I killed it (rmmod) and startet glxinfo and glxgears. Those strange warnings (see above: libGL warning) don't come but I only have 160 FPS (glxgears). It's the same if I don't use the DRI module.
Duh... Will it ever function again?
Thanx again.
Richard |
|
| Back to top |
|
|
mascanho
Veteran
Joined: 21 Dec 2004
Posts: 1241
Location: On my Bmx Bike on a Concrete Park Flatlanding ...
|
| Posted: Sat Mar 12, 2005 8:32 pm Post subject: |
|
|
man thats really strange , but ive heard stories of ppl that had nvidias FX 5200 and never got more then 700 fbs, i dont think its a software problem anymore, probably a chipset problem, wich chipset do you have ?
_________________
Flatland Life is a Choice !
emerge avatar |
|
| Back to top |
|
|
conri
n00b
Joined: 06 Mar 2005
Posts: 14
Location: Germany
|
| Posted: Sat Mar 12, 2005 11:44 pm Post subject: |
|
|
I know. It's really strange...
Here's my chipset:
| Code: |
$ lspci | grep AGP
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04)
|
Kernel is configured probably.
Some more ideas?
Thanx.
Richard |
|
| Back to top |
|
|
mascanho
Veteran
Joined: 21 Dec 2004
Posts: 1241
Location: On my Bmx Bike on a Concrete Park Flatlanding ...
|
| Posted: Sun Mar 13, 2005 12:38 am Post subject: |
|
|
so if you have set your viaxxx as module on kernel if you have all modules loaded maybe the problem is on some module that isnt suppose to be loaded ...
Do you have composite enable ?
or try to change the values in
from 0 to 3 to see what happens
_________________
Flatland Life is a Choice !
emerge avatar |
|
| Back to top |
|
|
conri
n00b
Joined: 06 Mar 2005
Posts: 14
Location: Germany
|
| Posted: Sun Mar 13, 2005 9:11 am Post subject: |
|
|
Hi,
imho the NvAGP option is for nvidia cards only. Am I right? I do own a matrox g400. So I didn't enable this option. If I should, give me a message.
Composite is now enabled:
| Code: |
$ cat /var/log/Xorg.0.log | grep Composite
(**) Extension "Composite" is enabled
(II) MGA(0): Sync: Separate Composite SyncOnGreen
|
agpgart and viaxxx are NO modules. I built them into the kernel (the dri howto recommended this).
Composite enabled doens't change the behavior of my crazy machine. Same warnings, same chrashes.
Thanx.
Richard |
|
| Back to top |
|
|
mascanho
Veteran
Joined: 21 Dec 2004
Posts: 1241
Location: On my Bmx Bike on a Concrete Park Flatlanding ...
|
| Posted: Sun Mar 13, 2005 4:08 pm Post subject: |
|
|
Set them as module, and disable composite on your xorg.conf , probably its composite has you may know composite is not enough stable yet and it has a few bugs
_________________
Flatland Life is a Choice !
emerge avatar |
|
| Back to top |
|
|
conri
n00b
Joined: 06 Mar 2005
Posts: 14
Location: Germany
|
| Posted: Sun Mar 13, 2005 9:32 pm Post subject: |
|
|
I set them as modules and disabled composite (as before, I just tested it after your remark above). But also tuxracer crashes, glxgears shows again around 460 FPS.
I really don't understand why 3d full screen games do crash. It must depend on my replacemnt of XFree. So Xorg must have some troubles on my machine (with DRI or mga - who knows...).
I just replaced Xfree with Xorg. Nothing else. After that tuxracer refuses to work. Tuxracer starts (also quake3) but after the first few inputs it crashes.
Thanx for your help! It's great that you try to help me all the time!
Richard |
|
| Back to top |
|
|
mascanho
Veteran
Joined: 21 Dec 2004
Posts: 1241
Location: On my Bmx Bike on a Concrete Park Flatlanding ...
|
| Posted: Sun Mar 13, 2005 10:10 pm Post subject: |
|
|
Ok man buit yourself a new xorg.conf but keep that one just in case, built one with everything you need and then try again,
Are you sure your video card handles full display Games ?? some cards dont maybe thats why, but for now try making a new xorg.conf from scratch
_________________
Flatland Life is a Choice !
emerge avatar |
|
| Back to top |
|
|
conri
n00b
Joined: 06 Mar 2005
Posts: 14
Location: Germany
|
| Posted: Mon Mar 14, 2005 8:36 pm Post subject: |
|
|
Hi,
ok, I built a new xorg.conf (from the scratch). Now there are some error messages (see below).
But first: my Matrox G400 supports full screen games. It did it before xorg very well (under xfree). Never ever had any problems. Must depend on xorg (imho).
The error messages (taken from Xorg.0.log):
| Code: |
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 32 depth: 24
(II) MGA(0): [drm] Sarea 2200+664: 2864
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
--snip--
THIS REPEATS FROM card1 TO card14
--snip--
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(II) MGA(0): [drm] drmOpen failed
(EE) MGA(0): [drm] DRIScreenInit failed. Disabling DRI.
(II) MGA(0): Using 2252 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
14 256x256 slots
5 512x512 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(II) MGA(0): Using overlay video
(==) MGA(0): Direct rendering disabled
|
So, DRM/DRI is not enabled. Glxinfo tells me the same:
| Code: |
$ glxinfo | grep rendering
direct rendering: No
|
The new xorg.conf (I shortened it) :
| Code: |
# File generated by xorgconfig.
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
# FontPath "/usr/share/fonts/Speedo/"
# FontPath "/usr/share/fonts/TrueType/"
# FontPath "/usr/share/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
HorizSync 15-115
VertRefresh 50-150
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
Driver "vga"
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** Matrox Graphics (generic) [mga]"
Driver "mga"
#VideoRam 16384
Option "mga_sdram"
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** Matrox Graphics (generic) [mga]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
|
So, no DRI enabled. Glxgears is slow (180 FPS), also Tuxracer. Without DRI everything works fine (tuxracer, quake3) but slow.
Thanx!
Richard |
|
| Back to top |
|
|
mascanho
Veteran
Joined: 21 Dec 2004
Posts: 1241
Location: On my Bmx Bike on a Concrete Park Flatlanding ...
|
| Posted: Mon Mar 14, 2005 9:05 pm Post subject: |
|
|
so know just check if you have the agp module loaded and try running | Code: | | opengl-update xorg-x11 |
and | Code: | | opengl-update nvidia |
you emeerge nvidia-glx right ?
_________________
Flatland Life is a Choice !
emerge avatar |
|
| Back to top |
|
|
conri
n00b
Joined: 06 Mar 2005
Posts: 14
Location: Germany
|
| Posted: Mon Mar 14, 2005 9:14 pm Post subject: |
|
|
The modules are running:
| Code: |
agpgart 14536 0 (autoclean) (unused)
mga 99072 0 (unused)
|
opengl-update already done.
I don't have a nvidia card so I don't think that I should emerge nvidia, right!?
I do need the driver "mga" for matrox. I guess nvidia drivers won't work with my matrox?!
Thanx. Richard |
|
| Back to top |
|
|
mascanho
Veteran
Joined: 21 Dec 2004
Posts: 1241
Location: On my Bmx Bike on a Concrete Park Flatlanding ...
|
| Posted: Tue Mar 15, 2005 12:10 am Post subject: |
|
|
hum ... weird, you should find out wich chipset your card has and then try to set in kernel, but i dont think thats the probem , i think the problem is on xorg or xorg.conf , have you tried another version of xorg ?
_________________
Flatland Life is a Choice !
emerge avatar |
|
| Back to top |
|
|
conri
n00b
Joined: 06 Mar 2005
Posts: 14
Location: Germany
|
| Posted: Tue Mar 15, 2005 7:13 am Post subject: |
|
|
Chipset is already known:
| Code: |
$ lspci | grep AGP
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04)
|
Chipset also set in kernel.
I also think that the problem is located in xorg or xorg.conf.
I didn't try another version of xorg. The replacement was done by gentoo automatically. I never had a look at the portage to find out if there are any other versions of xorg. I'll have a look later.
Thanx! Richard. |
|
| Back to top |
|
|
mascanho
Veteran
Joined: 21 Dec 2004
Posts: 1241
Location: On my Bmx Bike on a Concrete Park Flatlanding ...
|
| Posted: Tue Mar 15, 2005 12:34 pm Post subject: |
|
|
try either reinstalling xorg and check your USE or you can do another xorg.conf from scratch, the problem is know on xorg defenetly, be sure that xorg is loading the correct xorg.conf
_________________
Flatland Life is a Choice !
emerge avatar |
|
| Back to top |
|
|
conri
n00b
Joined: 06 Mar 2005
Posts: 14
Location: Germany
|
| Posted: Wed Mar 16, 2005 3:48 pm Post subject: |
|
|
I updated xorg to 6.8.2-r8. Then I made the xorg.conf from the scratch. I emerged x11-drm again. I also compiled a new kernel (2.4.2 .
But I have the same problems like before. Damn it! Everything is the same as before. I don't understand this anymore. Why worked everything fine with xfree86 and not with xorg?
Duhh...
Thanx. Richard |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Multimedia
