dr.lnx
n00b
Joined: 12 Jan 2005
Posts: 43
|
 Posted: Fri Mar 18, 2005 11:11 am Post subject: k3b e mkisofs errore |
 |
|
"mkisofs did not exit cleanly" è cio che mi dice k3b bloccandosi quando gli dico di scrivere un cd
questo è il risultato di "show debugging output"
| Code: |
System
-----------------------
K3b Version:0.11.18
KDE Version: 3.3.2
QT Version: 3.3.4
cdrecord
-----------------------
/usr/bin/cdrecord: Warning: Running on Linux-2.6.10-gentoo-r6
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
/usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/ide/host0/bus1/target0/lun0/cd'
devname: '/dev/ide/host0/bus1/target0/lun0/cd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TEAC '
Identifikation : 'DW-224E '
Revision : 'A.0J'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Drive buf size : 1460224 = 1426 KB
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Operation not permitted. set cd speed: scsi sendcmd: no error
CDB: BB 00 10 8A 10 98 00 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 40s
/usr/bin/cdrecord: Cannot set speed/dummy.
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 1 times full, min fill was 0%.
Track 01: data 699 MB
Total size: 803 MB (79:37.00) = 358275 sectors
Lout start: 803 MB (79:39/00) = 358275 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -12369 (97:17/06)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 69
Manufacturer: Moser Baer India Limited
Manufacturer is guessed because of the orange forum embargo.
The orange forum likes to get money for recent information.
The information for this media may not be correct.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 1574
BURN-Free was never needed.
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/ide/host0/bus1/target0/lun0/cd speed=24 -tao driveropts=burnfree -eject -data -tsize=358273s -
mkisofs
-----------------------
358273
0.14% done, estimate finish Fri Mar 18 12:06:08 2005
0.28% done, estimate finish Fri Mar 18 12:00:16 2005
0.42% done, estimate finish Fri Mar 18 11:58:15 2005
0.56% done, estimate finish Fri Mar 18 12:00:15 2005
mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR VERSION 0.11.18 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer K3b - Version 0.11.18 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-sandro/k3bQJhfEb.tmp -rational-rock -hide-list /tmp/kde-sandro/k3bzPjW8b.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-sandro/k3bU57vBa.tmp /home/sandro/.kde3.3/share/apps/k3b/temp/dummydir0/
|
il lettore cd lo riconosce riesco a montare cd e leggerli ma quando rpovo a scriverli k3b mi dà errore, avevo provato pure xcdrecord ma pure lui non funge
avete idea di cosa possa essere
ciao grazie |
|
Forum italiano (Italian)
