| View previous topic :: View next topic |
| Author |
Message |
Delvin
Guru
Joined: 07 Jul 2004
Posts: 546
|
 Posted: Thu Mar 17, 2005 10:04 am Post subject: [Xorg] Affiche n'importe quoi mais bien |
 |
|
Voila le truc, hier soir ma gentoo fonctionnait bien, sans problémes, mais aujourd'hui, j'allume le pc (un portable acer amd64) et X.org démarre mais affiche juste des lignes de couleurs qui vont et viennent... enfin c'est pas facile a expliquer...
en fait c comme dans ce message : https://forums.gentoo.org/viewtopic-t-308836.html (les captures d'ecran dans le 3eme post) et voila, je peux meme pas tuer X....
sinon quand je redemmarre en init 1 en editant le ligne dans grub, le fichier Xorg.0.log me donne 3 warning et aucune erreur, je vous recopie les warning : | Code: | (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
|
voila...
APM, je trouve pas dans le kernel ou on l'active mais je pense que le pb viens de nvidia plutot.
je peux pas recopier le xorg.conf (un peu trop long) mais si vous voulez une partie specifique, je la recopierais
j'ai besoin de votre aide la c'est assez urgent, je peux rien faire ...
merci
_________________
Ne tirez pas sur les canards !! |
|
| Back to top |
|
 |
Adrien
Advocate
Joined: 13 Jul 2004
Posts: 2326
Location: Bretagne
|
| Posted: Thu Mar 17, 2005 10:29 am Post subject: |
|
|
Ben APM c'est à côté de l'ACPI je crois, cherches un peu !
Mais c'est vrai que le problème ne vient pas forcément de là.
T'as mis des trucs à jour dernièrement? T'as essayé de réémerger les drivers nvidia? T'as recompilé ton kernel?
Hmmmm pas mal de questions  |
|
| Back to top |
|
|
UB|K
l33t
Joined: 27 May 2004
Posts: 786
Location: Villeurbanne, France
|
| Posted: Thu Mar 17, 2005 10:31 am Post subject: |
|
|
L'erreur avec APM n'est pas un problème
Pour le reste, je sais pas trop, t'as essayé avec d'autre drivers ??
genre si tu es en "nvidia" essayes avec "nv" à la place ou bien avec "vesa" (si t'as pas de carte nvidia")
_________________
Reality is that which, when you stop believing in it, doesn't go away. |
|
| Back to top |
|
|
cylgalad
Veteran
Joined: 18 Apr 2003
Posts: 1327
Location: France
|
| Posted: Thu Mar 17, 2005 10:39 am Post subject: Re: [Xorg] Affiche n'importe quoi mais bien |
|
|
| Delvin wrote: | | Code: | (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
|
|
Ce sont des avertissements (warnings), donc ça n'est pas là qu'il faut chercher mais plutôt dans ton xorg.conf (je suppose que tu n'as pas de "(EE)" dans ton Xorg.0.log  )
L'apm, ça fait toujours ça de toute façon, et l'autre c'est juste un mode graphique inutilisé/inutilisable, j'ai le même et quelques autres et ça n'empêche pas xorg de fonctionner. |
|
| Back to top |
|
|
marvin rouge
Veteran
Joined: 01 Aug 2004
Posts: 1422
Location: Villa Lumierrante, Zonelibre
|
| Posted: Thu Mar 17, 2005 10:47 am Post subject: |
|
|
pour le problème APM (/dev/apm_bios) il suffit de rajouter dans la section "ServerFlags" l'option noPM: | Code: | Section "ServerFlags"
Option "NoPM"
EndSection |
pour le reste je ne sais pas ... |
|
| Back to top |
|
|
TTK
Guru
Joined: 02 Mar 2004
Posts: 523
|
| Posted: Thu Mar 17, 2005 1:16 pm Post subject: Re: [Xorg] Affiche n'importe quoi mais bien |
|
|
Ben t'as eesayé la solution que le gars as trouvée ?
Je le cite:
| Quote: |
I added NVreg_Mobile=0 to my modprobe nvidia but it still didn't make a difference
It didn't work when I just added that to modprobe from the prompt. But after adding it to the nvidia module in /etc/modules.d/nvidia and rebooting everything works great. I am running at 1680x1050!
|
|
|
| Back to top |
|
|
Delvin
Guru
Joined: 07 Jul 2004
Posts: 546
|
| Posted: Thu Mar 17, 2005 1:31 pm Post subject: |
|
|
les drivers nv fonctionne,
ca fait plaisir de voir une souris meme si c'est pas encore le top c pas mal
je vais unmerger/emerger les drivers nvidia pour voir
les warnings n'ont rien a voir finalement ...
et oui j'ai pas d'erreurs dans le log
faut chercher duy coté driver maintenant
_________________
Ne tirez pas sur les canards !! |
|
| Back to top |
|
|
Delvin
Guru
Joined: 07 Jul 2004
Posts: 546
|
| Posted: Thu Mar 17, 2005 2:03 pm Post subject: |
|
|
j'ai unmergé /emergé nvidia-kernel et nvidia-glx mais ca fait toujours la meme erreur ...
ce qui est bizarre c'est que je suis en profile 2005.0 sur un amd64 et que nvidia-glx prend pas le flag multilib...
faudrait-il que j'emerge emul-linux-nvidia??
je suis paumé ca marchais encore hier et je n'ai rien rajouté dans le kernel au niveau des drivers
_________________
Ne tirez pas sur les canards !! |
|
| Back to top |
|
|
TTK
Guru
Joined: 02 Mar 2004
Posts: 523
|
| Posted: Thu Mar 17, 2005 2:13 pm Post subject: |
|
|
Youhou !
T'as essayé le NVreg_Mobile=0 ?? |
|
| Back to top |
|
|
Delvin
Guru
Joined: 07 Jul 2004
Posts: 546
|
| Posted: Thu Mar 17, 2005 2:27 pm Post subject: |
|
|
Je crois que j'ai trouvé, ca viens peut etre de gdm, parce que je me suis loggé en user de puis le runlevel 1 et X a bien démarré avec les drivers nvidia qui tournent(j'ai testé glxgears, 3500 fps)
EDIT : confirmé c'est gdm mais je sais pas trop comment le configurer pour que ca fonctionne ...
_________________
Ne tirez pas sur les canards !! |
|
| Back to top |
|
|
Delvin
Guru
Joined: 07 Jul 2004
Posts: 546
|
| Posted: Thu Mar 17, 2005 2:48 pm Post subject: |
|
|
c'est normal que dans mon dmesg j'ai | Code: | | nvidia: module license 'NVIDIA' taints kernel. |
??
c'est pas gdm, je viens de l'unmerger et ca continue quand je fais startx...
zut...
_________________
Ne tirez pas sur les canards !! |
|
| Back to top |
|
|
UB|K
l33t
Joined: 27 May 2004
Posts: 786
Location: Villeurbanne, France
|
| Posted: Thu Mar 17, 2005 3:09 pm Post subject: |
|
|
| Delvin wrote: | c'est normal que dans mon dmesg j'ai | Code: | | nvidia: module license 'NVIDIA' taints kernel. |
?? |
oui c'est linux qui braille parce qu'on lui donne un module non-libre!!
_________________
Reality is that which, when you stop believing in it, doesn't go away. |
|
| Back to top |
|
|
Delvin
Guru
Joined: 07 Jul 2004
Posts: 546
|
| Posted: Thu Mar 17, 2005 6:30 pm Post subject: |
|
|
ok merci pour la precision  quand on sait pas, on se demande ce qu'il se passe
sinon aucune idée pour mon probleme, j'ai ajouté NVreg_Mobile=0 mais en fait j'ai l'impression qua ca fait rien,avec ou sans ca marche pas...
_________________
Ne tirez pas sur les canards !! |
|
| Back to top |
|
|
Delvin
Guru
Joined: 07 Jul 2004
Posts: 546
|
| Posted: Thu Mar 17, 2005 7:19 pm Post subject: |
|
|
c'est un truc de fou, des fois ca marche et des fois ca marche pas, véridique...
j'ai changé le wm par defaut dans mon .xinitrc, fluxbox s'est lancé une fois, mais au reboot suivant, bin ca marche plus...
je comprend plus rien...
l'option NVreg_Mobile que je la mette a 1 ou 0 ou que je la mette pas, que je rajout option ou options devant, aucun changement...
ca commence a me gaver severe...
s'l vous plait aidez moi j'en peux plus la...
_________________
Ne tirez pas sur les canards !! |
|
| Back to top |
|
|
Delvin
Guru
Joined: 07 Jul 2004
Posts: 546
|
| Posted: Thu Mar 17, 2005 7:50 pm Post subject: |
|
|
personne peut m'aider??
me dirt pourquoi le driver nv fonctionne et le nvidia fonctionne pas ??
ou peut on configurer le driver nvidia manuellement ?
svp donnez moi des pistes, des trucs a essayer meme si ca doit pas marcher... que je fasse quelque chose parce que je tourne en rond a refaire les memes trucs tout le temps et ca marche jamais...
je peux meme pas killer le server X, l'affichage est completement perdu je suis obligé d'eteindre manuellement a chaque fois...
_________________
Ne tirez pas sur les canards !! |
|
| Back to top |
|
|
billiob
Guru
Joined: 30 Dec 2004
Posts: 425
Location: Paris, France
|
| Posted: Thu Mar 17, 2005 8:05 pm Post subject: |
|
|
T'as essayé de mettre, dans la section device de ton xorg.conf, ceci:
Option "IgnoreEDID" "true"
<mode geek pas gentil>
Sinon, cherche des xorg.conf sur google correspondant à ton écran.
Et lis aussi la doc : ftp://download.nvidia.com/XFree86/Linux-x86/1.0-7167/README.txt ( il y a toute une partie sur les ladtops)
Essaye de changer la version de ton driver.
</mode geek pas gentil>
_________________
billiob |
|
| Back to top |
|
|
Delvin
Guru
Joined: 07 Jul 2004
Posts: 546
|
| Posted: Mon Mar 21, 2005 8:07 am Post subject: |
|
|
j'ai mis les derniers driver nvidia, les 7167, rien de mieux
par contre j'ai commencé a eplucher la doc que billiob a donné, NV_reg_Mobile accepte plusieurs valeurs, mais aucune ne fonctionne correctement...
j'ai aussi vu dans la doc que 5 peripheriques étaient crés dans /dev, or moi je n'en ai que 2 : nvidia0 et nvidiactl, le probleme ne se siteurais pas a ce niveau, peut etre dans la configuration de udev??
je posterais mon Xorg.conf dans la soirée, il y a peut etre des erreurs flagrantes dedans
faut-il reparamétrer udev ??
aurai-je un jour de l'acceleration 3D sous linux??
autant de question qui demande reponse ^^
merci
_________________
Ne tirez pas sur les canards !! |
|
| Back to top |
|
|
Delvin
Guru
Joined: 07 Jul 2004
Posts: 546
|
| Posted: Mon Mar 21, 2005 5:58 pm Post subject: |
|
|
je vous post mon xorg.conf, en esperant que j'ai merdé avec une option qui ferais faire n'importe quoi au drivers nvidia | Code: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
ModulePath "/usr/X11R6/lib64/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
# Load "speedo"
Load "v4l"
Load "synaptics"
Load "bitmap"
Load "extmod"
# Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "glx"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "TouchPad"
driver "synaptics"
Option "Protocol" "auto-dev"
Option "Device" "/dev/psaux"
Option "EmulateMidButtonTime" "75"
Option "Edges" "1900 5400 1800 3900"
Option "Finger" "25 30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.02"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0007"
Option "SHMConfig" "On"
Option "UpDownScrolling" "On"
Option "CorePointer"
Option "zAxismapping" "4 5"
EndSection
Section "Monitor"
# HorizSync 29-49
# VertRefresh 55-60
Option "DPMS"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" "1" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
Option "IgnoreEDID" "true"
Option "NvAgp" "1"
Identifier "Card0"
Driver "nv"
Option "NoLogo" "0"
VideoRam 65536
Option "RenderAccel" "true"
# VendorName "nVidia Corporation"
# BoardName "Unknown Board"
# BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "800x600"
EndSubSection
EndSection
#Section "ServerFlags"
# Option "NoPM"
#EndSection |
la je galére vraiment, j'ai besoin d'aide, si je pouvais eviter d'avoir a reinstaller gentoo...
en plus on doit pouvoir reparer...
merci
_________________
Ne tirez pas sur les canards !! |
|
| Back to top |
|
|
Delvin
Guru
Joined: 07 Jul 2004
Posts: 546
|
| Posted: Mon Mar 21, 2005 6:25 pm Post subject: |
|
|
je vous met le resultat de dmesg : | Code: | Bootdata ok (command line is root=/dev/hda4 gentoo="nodevfs")
Linux version 2.6.9-gentoo-r14 (root@donato) (version gcc 3.4.3 20050110 (Gentoo Linux 3.4.3.20050110, ssp-3.4.3.20050110-0, pie-8.7.7)) #7 SMP Thu Mar 10 17:59:24 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
BIOS-e820: 000000001ff70000 - 000000001ff7f000 (ACPI data)
BIOS-e820: 000000001ff7f000 - 000000001ff80000 (ACPI NVS)
BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Scanning NUMA topology in Northbridge 24
Number of nodes 1 (0)
Node 0 MemBase 0000000000000000 Limit 000000001ff70000
Using node hash shift of 24
Bootmem setup node 0 0000000000000000-000000001ff70000
No mptable found.
On node 0 totalpages: 130928
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126832 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f6ea0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000001ff792dc
ACPI: FADT (v001 NVIDIA CK8 0x06040000 PTL_ 0x000f4240) @ 0x000000001ff7ee1d
ACPI: MADT (v001 NVIDIA NV_APIC_ 0x06040000 LTP 0x00000000) @ 0x000000001ff7ee91
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000001ff7eee1
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000001ff7efd8
ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
Checking aperture...
CPU 0: aperture @ d8000000 size 128 MB
Built 1 zonelists
Kernel command line: root=/dev/hda4 gentoo="nodevfs" console=tty0
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 65536 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 2194.345 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 508728k/523712k available (3028k kernel code, 0k reserved, 1332k data, 196k init)
Calibrating delay loop... 4341.76 BogoMIPS (lpj=2170880)
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
tbget-0291: *** Info: Table [DSDT] replaced by host OS
Using local APIC NMI watchdog using perfctr0
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU0: AMD Athlon 64 Processor 3400+ stepping 0a
per-CPU timeslice cutoff: 1023.72 usecs.
task migration cache decay timeout: 2 msecs.
Only one processor found.
Using local APIC timer interrupts.
Detected 12.467 MHz APIC timer.
time.c: Using PIT/TSC based timekeeping.
Brought up 1 CPUs
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 37)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21) *0
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21) *0
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21) *0
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21) *0
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 22) *0
ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21) *0
ACPI: PCI Interrupt Link [LPID] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21) *0, disabled.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 21 (level, low) -> IRQ 177
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 20 (level, low) -> IRQ 185
ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, low) -> IRQ 177
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, low) -> IRQ 185
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 22 (level, low) -> IRQ 193
ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:06.1[B] -> GSI 21 (level, low) -> IRQ 177
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 19
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 19 (level, low) -> IRQ 201
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 18
ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 18 (level, low) -> IRQ 209
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 17
ACPI: PCI interrupt 0000:02:07.1[B] -> GSI 17 (level, low) -> IRQ 217
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 16
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 16 (level, low) -> IRQ 225
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 201
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xd8000000
PCI-DMA: Disabling IOMMU.
Simple Boot Flag at 0x36 set to 0x1
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
inotify init: minor=63
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds).
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Thermal Zone [THRM] (52 C)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
ACPI: PCI interrupt 0000:00:06.1[B] -> GSI 21 (level, low) -> IRQ 177
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.8
180 degree mounted touchpad
Sensor: 29
new absolute packet format
Touchpad has extended capability bits
-> 4 multi-buttons, i.e. besides standard buttons
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
Using anticipatory io scheduler
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 5.3.19-k2
Copyright (c) 1999-2004 Intel Corporation.
tg3.c:v3.10 (September 14, 2004)
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 19 (level, low) -> IRQ 201
eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:43:09:90
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.29.
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3-150: IDE controller at PCI slot 0000:00:08.0
NFORCE3-150: chipset revision 165
NFORCE3-150: not 100% native mode: will probe irqs later
NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
ide0: BM-DMA at 0x2080-0x2087, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2088-0x208f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N080ATMR04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: QSI DVDRW SDW-042, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.00.039.
3w-xxxx: No cards found.
libata version 1.02 loaded.
Fusion MPT base driver 3.01.16
Copyright (c) 1999-2004 LSI Logic Corporation
Fusion MPT SCSI Host driver 3.01.16
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC).
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 22 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49447 usecs
intel8x0: clocking to 47469
ALSA device list:
#0: NVidia nForce3 at 0xd0002000, irq 193
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
PCI0 USB0 USB1 USB2 MCI0 GIGA LID
ACPI: (supports S0 S3 S4 S5)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 196k freed
Adding 506036k swap on /dev/hda3. Priority:-1 extents:1
EXT3 FS on hda4, internal journal
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 201
NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-7167 Fri Feb 25 09:11:39 PST 2005
NVRM: WARNING: Your Linux kernel has problems in its implementation of
NVRM: the change_page_attr kernel interface. The NVIDIA kernel
NVRM: module will attempt to work around these problems, but
NVRM: system stability may be affected. It is recommended that
NVRM: you update to a 2.6.11 or newer kernel.
NTFS driver 2.1.20 [Flags: R/O MODULE].
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 20 (level, low) -> IRQ 185
ohci_hcd 0000:00:02.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 185, pci mem ffffff000000e000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, low) -> IRQ 177
ohci_hcd 0000:00:02.1: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 177, pci mem ffffff0000010000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, low) -> IRQ 185
ehci_hcd 0000:00:02.2: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 185, pci mem ffffff0000012000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ndiswrapper version 1.1 loaded (preempt=no,smp=yes)
ndiswrapper: driver netbc564 (,10/01/2002,3.70.17.5) loaded
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 16 (level, low) -> IRQ 225
ndiswrapper: using irq 225
ohci_hcd 0000:00:02.0: wakeup
wlan0: ndiswrapper ethernet device 00:0b:6b:4b:81:ad using driver netbc564, configuration file 14E4:4320.5.conf
wlan0: encryption modes supported: WEP
usb 2-1: new low speed USB device using address 2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-1
NTFS volume version 3.1.
usb 1-3: new full speed USB device using address 2
usb-storage: USB Mass Storage device detected
usb-storage: -- associate_dev
usb-storage: Vendor: 0x0483, Product: 0x0321, Revision: 0x0192
usb-storage: Interface Subclass: 0x06, Protocol: 0x50
usb-storage: Vendor: Generic, Product: USB Mass Storage Device
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
usb-storage: GetMaxLUN command result is 1, data is 0
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 24 00
usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
usb-storage: Status code 0; transferred 36/36
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Vendor: Generic Model: Flash R/W Rev: 2002
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x80000002 L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x80000002 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
usb-storage: (Unknown Key): (unknown ASC/ASCQ)
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x3 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x80000003 L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x80000003 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
usb-storage: (Unknown Key): (unknown ASC/ASCQ)
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x4 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x4 R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x80000004 L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x80000004 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
usb-storage: (Unknown Key): (unknown ASC/ASCQ)
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
USB Mass Storage device found at 2
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX. |
y'a un ou deux trucs pas clairs...
je sais pas trop quoi faire...
_________________
Ne tirez pas sur les canards !! |
|
| Back to top |
|
|
billiob
Guru
Joined: 30 Dec 2004
Posts: 425
Location: Paris, France
|
| Posted: Mon Mar 21, 2005 7:50 pm Post subject: |
|
|
Un dmesg me donne ça:
| Code: | nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6629 Wed Nov 3 13:12:51 PST 2004
|
Toi, tu as ça (je n'ai pas la même carte graphique aussi) :
| Code: | nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 201
NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-7167 Fri Feb 25 09:11:39 PST 2005
NVRM: WARNING: Your Linux kernel has problems in its implementation of
NVRM: the change_page_attr kernel interface. The NVIDIA kernel
NVRM: module will attempt to work around these problems, but
NVRM: system stability may be affected. It is recommended that
NVRM: you update to a 2.6.11 or newer kernel. |
Ceci me semble bizarre.
Tu trouveras le .config de mon noyau dans ce post : [kernel] 19Mo pour le bzImage (résolu)
Sinon, as-tu essayé avec un noyau plus ancien, il me semble qu'il y ait des problèmes avec les 2.6.11
_________________
billiob |
|
| Back to top |
|
|
E11
l33t
Joined: 24 Feb 2004
Posts: 764
Location: Bruxelles
|
| Posted: Mon Mar 21, 2005 9:26 pm Post subject: |
|
|
Quel kernel as-tu ?
Parce qu'il n'y a pas encore de driver nvidia qui fonctionne pour les 2.6.11... |
|
| Back to top |
|
|
Delvin
Guru
Joined: 07 Jul 2004
Posts: 546
|
| Posted: Mon Mar 21, 2005 11:20 pm Post subject: |
|
|
je suis en 2.6.9
_________________
Ne tirez pas sur les canards !! |
|
| Back to top |
|
|
Starch
Guru
Joined: 26 Feb 2003
Posts: 539
Location: Rennes, France
|
| Posted: Thu Mar 24, 2005 11:05 am Post subject: |
|
|
Quelques trucs au hasard :
- Framebuffer riva dans le kernel => enlève le
- NvAGP, je me souviens plus de ce qu'il faut mettre, mais il serait bon de tester avec 0, 1, et 2
- et vérifier que agpgart est compilé d'ailleurs...
Solution bourrin : partuir d'un xorg.conf vide et rajouter au fur et à mesure.
J'ai une fx5500 (je crois, j'ai pris la moins chère que j'aie trouvé) sur un amd64 et je n'ai eu absolument aucun problème (d'ailleurs en reprenant le xorg.conf de l'ancien pc). Si j'y pense et si j'ai le temps ce soir, je pasterais mes fichiers de conf.
_________________
- Vous aurez beau dire... Y'a pas qu'd'la pomme... Y'aurait pas aussi d'la betterave ?
- Si, y'en a aussi |
|
| Back to top |
|
|
marvin rouge
Veteran
Joined: 01 Aug 2004
Posts: 1422
Location: Villa Lumierrante, Zonelibre
|
| Posted: Thu Mar 24, 2005 11:07 am Post subject: |
|
|
| E11 wrote: | Quel kernel as-tu ?
Parce qu'il n'y a pas encore de driver nvidia qui fonctionne pour les 2.6.11... |
gniii ?
| Code: | ezach ~ # uname -r
2.6.11-gentoo
ezach ~ # emerge -pv nvidia-kernel
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[ebuild R ] media-video/nvidia-kernel-1.0.7167-r1 0 kB |
et tout marche très bien ... |
|
| Back to top |
|
|
Delvin
Guru
Joined: 07 Jul 2004
Posts: 546
|
| Posted: Thu Mar 24, 2005 7:59 pm Post subject: |
|
|
bon je vais tenter un passage en kernel 2.6.11, d'apres le message d'erreur dans dmesg ca pourrais venir de la
pour le changement, j'emerge les derniers gentoo-dev-sources en ~amd64, je refais la symlink /usr/src/linux vers le bon repertoire, je rentre dedans et un | Code: | | make oldconfig && make && make modules_install |
ca devrais le faire c ca ?
_________________
Ne tirez pas sur les canards !! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
