View previous topic :: View next topic |
Author |
Message |
DragonZeal n00b
Joined: 28 Feb 2005 Posts: 58
|
|
Back to top |
|
|
c4 Guru
Joined: 21 Feb 2004 Posts: 312 Location: Sweden
|
Posted: Mon Mar 21, 2005 9:19 pm Post subject: |
|
|
I had some troubles with the nvidiadrivers, so I figured it was something to do with my old geforce2mx card. I had a picture and all, but it was only black&white, so I switched to the nv driver and I got my color back. I was glad that it worked so I didnt bother getting the nvidia drivers going.
DragonZeal, you could perhaps try the nv driver / alternate drivers, see if theres any difference. it would seem odd if the drivers were causing you the error, but it might be worth checking. _________________ AMD64 Gentoo Hardened server
AMD64 Xubuntu Desktop
X86 Dreamlinux Vaio laptop |
|
Back to top |
|
|
beandog Bodhisattva
Joined: 04 May 2003 Posts: 2072 Location: /usa/utah
|
Posted: Mon Mar 21, 2005 9:29 pm Post subject: |
|
|
From the way I see things, you are trying to start freevo in the console. It's trying to output to framebuffer which needs the svgalib module. It might only work as root, becuase it might be loading the module for you.
Try running freevo after starting up X and logging in as any user. Then it should work. Or emerge freevo with "X" use flag included, and run /etc/init.d/freevo start
Edit: while I'm at it, post the output of this stuff:
emerge -pv freevo
cat /etc/conf.d/freevo
cat /etc/freevo/freevo.conf _________________ If it ain't broke, tweak it. dvds | blurays | blog | wiki |
|
Back to top |
|
|
DragonZeal n00b
Joined: 28 Feb 2005 Posts: 58
|
Posted: Mon Mar 21, 2005 9:31 pm Post subject: |
|
|
I can start Freevo when I am in root console but when I start Freevo as user in X then it doesnt go to full screen.
Can't I just use the root?
It's going to be a standalone divxbox anyway with no connection to internet. |
|
Back to top |
|
|
beandog Bodhisattva
Joined: 04 May 2003 Posts: 2072 Location: /usa/utah
|
Posted: Mon Mar 21, 2005 9:35 pm Post subject: |
|
|
post your xorg.conf, too. _________________ If it ain't broke, tweak it. dvds | blurays | blog | wiki |
|
Back to top |
|
|
c4 Guru
Joined: 21 Feb 2004 Posts: 312 Location: Sweden
|
Posted: Mon Mar 21, 2005 10:09 pm Post subject: |
|
|
DragonZeal wrote: | Can't I just use the root?
It's going to be a standalone divxbox anyway with no connection to internet. |
Well finding a solution like this is not the same as solving the problem.
I guess if the box was strictly kept away from all internet, and also remained separated from a local network that has access to the internet, than it wouldn't matter as long as your the only user who may access your box. However it is kind of poor practise to run a linux box as root, if I were you I would try to get freevo running as your user DragonZeal, but in the end it is ofcourse your choice.
Did you find anything in freevos logs? had a look in /tmp/freevo/ if they showed anything of interest? What use-flags did you use while building freevo ? _________________ AMD64 Gentoo Hardened server
AMD64 Xubuntu Desktop
X86 Dreamlinux Vaio laptop |
|
Back to top |
|
|
DragonZeal n00b
Joined: 28 Feb 2005 Posts: 58
|
|
Back to top |
|
|
c4 Guru
Joined: 21 Feb 2004 Posts: 312 Location: Sweden
|
Posted: Wed Mar 23, 2005 7:18 pm Post subject: |
|
|
Not sure if this is relevant anymore, I had a look at your configs DragonZeal, and they look ok. One thing that differs in our setup is that I have changed my xorg.conf to only allow the same resolutions as I use for freevo, so I dont have any missmatch there.
Since everything worked ok as root but not as your user, have you checked that other permissions are ok? Like mplayer works, you can access X fine etc. Have you tried to run freevo with a default configfile, perhaps theres some error with paths in local_conf.py that your user can't access ? _________________ AMD64 Gentoo Hardened server
AMD64 Xubuntu Desktop
X86 Dreamlinux Vaio laptop |
|
Back to top |
|
|
DragonZeal n00b
Joined: 28 Feb 2005 Posts: 58
|
Posted: Wed Mar 23, 2005 11:32 pm Post subject: |
|
|
I decided to reinstall with the and set the proper USE flags in my make.conf that all the programs which compile with freevo needs.
We'll see after this installation. |
|
Back to top |
|
|
|