Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
CUPS and SMC print server
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
plastikman187
Apprentice
Apprentice


Joined: 15 Mar 2005
Posts: 233

PostPosted: Mon Mar 28, 2005 8:16 pm    Post subject: CUPS and SMC print server Reply with quote

Hello,

I have cups installed with a smc baracade and a cannon i850 printer i am unable to print to the SMC baracade.

I have every thing set up correctly as the printer is being seen by cups at localhost:631 but every time i print i get an error saying that the job has been aborted if i try to restart the job i get this error
Code:

Error:

     client-error-not-possible


I have not tried conencting directly to the printer yet

i followed this guide to get the drivers installed

https://forums.gentoo.org/viewtopic-t-94604-highlight-i850.html

Here is my log file

Code:

I [28/Mar/2005:11:57:40 +0000] Listening to 0:631
D [28/Mar/2005:11:57:40 +0000] AddLocation: added location '/'
D [28/Mar/2005:11:57:40 +0000] DenyIP: / deny 00000000/00000000
D [28/Mar/2005:11:57:40 +0000] AllowIP: / allow 7f000001/ffffffff
D [28/Mar/2005:11:57:40 +0000] AllowIP: / allow c0a80200/ffffff00
D [28/Mar/2005:11:57:40 +0000] AddLocation: added location '/admin'
D [28/Mar/2005:11:57:40 +0000] DenyIP: /admin deny 00000000/00000000
D [28/Mar/2005:11:57:40 +0000] AllowIP: /admin allow 7f000001/ffffffff
I [28/Mar/2005:11:57:40 +0000] Loaded configuration file "/etc/cups/cupsd.conf"
I [28/Mar/2005:11:57:40 +0000] Configured for up to 100 clients.
I [28/Mar/2005:11:57:40 +0000] Allowing up to 100 client connections per host.
I [28/Mar/2005:11:57:40 +0000] Full reload is required.
D [28/Mar/2005:11:57:40 +0000] LoadAllPrinters: Loading printer I850...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "ipp"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "lpd"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp0"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp1"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp2"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp3"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp4"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp5"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp6"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp7"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp8"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp9"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp10"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp11"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp12"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp13"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp14"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "usb:/dev/usb/lp15"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "http"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "scsi"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "serial:/dev/ttyS0?baud=115200"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "serial:/dev/ttyS1?baud=115200"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "serial:/dev/ttyS2?baud=115200"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "serial:/dev/ttyS3?baud=115200"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "serial:/dev/ttyS4?baud=115200"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "serial:/dev/ttyS5?baud=115200"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "serial:/dev/ttyS6?baud=115200"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "serial:/dev/ttyS7?baud=115200"...
D [28/Mar/2005:11:57:40 +0000] LoadDevices: Added device "socket"...
I [28/Mar/2005:11:57:40 +0000] LoadPPDs: Read "/etc/cups/ppds.dat", 16 PPDs...
I [28/Mar/2005:11:57:40 +0000] LoadPPDs: No new or changed PPDs...
D [28/Mar/2005:11:57:40 +0000] LoadAllJobs: Scanning /var/spool/cups...
D [28/Mar/2005:11:57:40 +0000] LoadAllJobs: Loading attributes for job 1...
D [28/Mar/2005:11:57:40 +0000] LoadAllJobs: Loading attributes for job 2...
D [28/Mar/2005:11:57:40 +0000] LoadAllJobs: Loading attributes for job 3...
D [28/Mar/2005:11:57:40 +0000] LoadAllJobs: Loading attributes for job 4...
D [28/Mar/2005:11:57:40 +0000] LoadAllJobs: Loading attributes for job 5...
D [28/Mar/2005:11:57:40 +0000] LoadAllJobs: Loading attributes for job 6...
D [28/Mar/2005:11:57:40 +0000] LoadAllJobs: Loading attributes for job 7...
D [28/Mar/2005:11:57:40 +0000] LoadAllJobs: Loading attributes for job 10...
D [28/Mar/2005:11:57:40 +0000] LoadAllJobs: Loading attributes for job 11...
D [28/Mar/2005:11:57:40 +0000] LoadAllJobs: Loading attributes for job 12...
D [28/Mar/2005:11:57:40 +0000] LoadAllJobs: Loading attributes for job 13...
D [28/Mar/2005:11:57:40 +0000] LoadAllJobs: Loading attributes for job 14...
D [28/Mar/2005:11:57:40 +0000] LoadAllJobs: Loading attributes for job 15...
I [28/Mar/2005:11:57:40 +0000] Full reload complete.
D [28/Mar/2005:11:57:40 +0000] StartListening: NumListeners=1
E [28/Mar/2005:11:57:40 +0000] StartListening: Unable to find IP address for server name "slacker" - Unknown host
D [28/Mar/2005:11:57:40 +0000] StartListening: address=00000000 port=631
D [28/Mar/2005:11:57:40 +0000] ResumeListening: setting input bits...
D [28/Mar/2005:11:57:58 +0000] AcceptClient: 5 from localhost:631.
D [28/Mar/2005:11:57:58 +0000] ReadClient: 5 GET /jobs HTTP/1.1
D [28/Mar/2005:11:57:58 +0000] CGI /usr/lib/cups/cgi-bin/jobs.cgi started - PID = 6775
I [28/Mar/2005:11:57:58 +0000] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=6775)
D [28/Mar/2005:11:57:58 +0000] SendCommand: 5 file=7
D [28/Mar/2005:11:57:58 +0000] AcceptClient: 8 from localhost:631.
D [28/Mar/2005:11:57:58 +0000] ReadClient: 8 POST / HTTP/1.1
D [28/Mar/2005:11:57:58 +0000] ProcessIPPRequest: 8 status_code=1
D [28/Mar/2005:11:57:58 +0000] CloseClient: 8
D [28/Mar/2005:11:57:58 +0000] ReadClient: 5 GET /favicon.ico HTTP/1.1
D [28/Mar/2005:11:57:58 +0000] SendError: 5 code=404 (Not Found)
D [28/Mar/2005:11:57:58 +0000] CloseClient: 5
D [28/Mar/2005:11:58:03 +0000] AcceptClient: 5 from localhost:631.
D [28/Mar/2005:11:58:03 +0000] ReadClient: 5 POST / HTTP/1.1
D [28/Mar/2005:11:58:03 +0000] ProcessIPPRequest: 5 status_code=1
D [28/Mar/2005:11:58:03 +0000] ReadClient: 5 POST / HTTP/1.1
D [28/Mar/2005:11:58:03 +0000] ProcessIPPRequest: 5 status_code=0
D [28/Mar/2005:11:58:03 +0000] CloseClient: 5
D [28/Mar/2005:11:58:03 +0000] AcceptClient: 5 from localhost:631.
D [28/Mar/2005:11:58:03 +0000] ReadClient: 5 POST / HTTP/1.1
D [28/Mar/2005:11:58:03 +0000] ProcessIPPRequest: 5 status_code=1
D [28/Mar/2005:11:58:03 +0000] ReadClient: 5 POST / HTTP/1.1
D [28/Mar/2005:11:58:03 +0000] ProcessIPPRequest: 5 status_code=1
D [28/Mar/2005:11:58:03 +0000] ReadClient: 5 POST / HTTP/1.1
D [28/Mar/2005:11:58:03 +0000] ProcessIPPRequest: 5 status_code=0
D [28/Mar/2005:11:58:03 +0000] CloseClient: 5
D [28/Mar/2005:11:58:05 +0000] AcceptClient: 5 from localhost:631.
D [28/Mar/2005:11:58:05 +0000] ReadClient: 5 POST / HTTP/1.1
D [28/Mar/2005:11:58:05 +0000] ProcessIPPRequest: 5 status_code=1
D [28/Mar/2005:11:58:05 +0000] ReadClient: 5 POST / HTTP/1.1
D [28/Mar/2005:11:58:06 +0000] ProcessIPPRequest: 5 status_code=1
D [28/Mar/2005:11:58:06 +0000] ReadClient: 5 POST / HTTP/1.1
D [28/Mar/2005:11:58:06 +0000] ProcessIPPRequest: 5 status_code=0
D [28/Mar/2005:11:58:06 +0000] CloseClient: 5
D [28/Mar/2005:11:58:06 +0000] AcceptClient: 5 from localhost:631.
D [28/Mar/2005:11:58:06 +0000] ReadClient: 5 POST / HTTP/1.1
D [28/Mar/2005:11:58:06 +0000] ProcessIPPRequest: 5 status_code=1
D [28/Mar/2005:11:58:06 +0000] ReadClient: 5 POST / HTTP/1.1
D [28/Mar/2005:11:58:06 +0000] ProcessIPPRequest: 5 status_code=1
D [28/Mar/2005:11:58:06 +0000] ReadClient: 5 POST / HTTP/1.1
D [28/Mar/2005:11:58:06 +0000] ProcessIPPRequest: 5 status_code=0
D [28/Mar/2005:11:58:06 +0000] CloseClient: 5
D [28/Mar/2005:11:58:06 +0000] AcceptClient: 5 from localhost:631.
D [28/Mar/2005:11:58:06 +0000] ReadClient: 5 POST /printers/I850 HTTP/1.1
D [28/Mar/2005:11:58:06 +0000] print_job: auto-typing file...
D [28/Mar/2005:11:58:06 +0000] print_job: request file type is application/postscript.
D [28/Mar/2005:11:58:06 +0000] check_quotas: requesting-user-name = 'zak'
D [28/Mar/2005:11:58:06 +0000] print_job: requesting-user-name = 'zak'
I [28/Mar/2005:11:58:06 +0000] Adding start banner page "none" to job 16.
I [28/Mar/2005:11:58:06 +0000] Adding end banner page "none" to job 16.
I [28/Mar/2005:11:58:06 +0000] Job 16 queued on 'I850' by 'zak'.
D [28/Mar/2005:11:58:06 +0000] Job 16 hold_until = 0
D [28/Mar/2005:11:58:06 +0000] StartJob(16, 0x54a730)
D [28/Mar/2005:11:58:06 +0000] StartJob() id = 16, file = 0/1
D [28/Mar/2005:11:58:06 +0000] job-sheets=none,none
D [28/Mar/2005:11:58:06 +0000] banner_page = 0
D [28/Mar/2005:11:58:06 +0000] StartJob: argv = "I850","16","zak","(stdin)","1","","/var/spool/cups/d00016-001"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[2]="USER=root"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[3]="CHARSET=iso-8859-1"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[4]="LANG=en"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[5]="PPD=/etc/cups/ppd/I850.ppd"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[6]="CUPS_SERVERROOT=/etc/cups"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[7]="RIP_MAX_CACHE=8m"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[8]="TMPDIR=/var/spool/cups/tmp"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[9]="CONTENT_TYPE=application/postscript"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[10]="DEVICE_URI=lpd://192.168.2.1/lpt1"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[11]="PRINTER=I850"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[12]="CUPS_DATADIR=/usr/share/cups"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[14]="CUPS_SERVER=localhost"
D [28/Mar/2005:11:58:06 +0000] StartJob: envp[15]="IPP_PORT=631"
D [28/Mar/2005:11:58:06 +0000] StartJob: statusfds = [ 7 8 ]
D [28/Mar/2005:11:58:06 +0000] StartJob: filterfds[1] = [ 9 -1 ]
D [28/Mar/2005:11:58:06 +0000] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [28/Mar/2005:11:58:06 +0000] StartJob: filterfds[0] = [ 10 11 ]
D [28/Mar/2005:11:58:06 +0000] start_process("/usr/lib/cups/filter/pstops", 0x7fbffee7d0, 0x7fbffed9b0, 9, 11, 8)
I [28/Mar/2005:11:58:06 +0000] Started filter /usr/lib/cups/filter/pstops (PID 6778) for job 16.
D [28/Mar/2005:11:58:06 +0000] StartJob: filter = "/usr/lib/cups/filter/pstocanonbj"
D [28/Mar/2005:11:58:06 +0000] StartJob: filterfds[1] = [ 9 12 ]
D [28/Mar/2005:11:58:06 +0000] start_process("/usr/lib/cups/filter/pstocanonbj", 0x7fbffee7d0, 0x7fbffed9b0, 10, 12, 8)
I [28/Mar/2005:11:58:06 +0000] Started filter /usr/lib/cups/filter/pstocanonbj (PID 6779) for job 16.
D [28/Mar/2005:11:58:06 +0000] StartJob: backend = "/usr/lib/cups/backend/lpd"
D [28/Mar/2005:11:58:06 +0000] StartJob: filterfds[0] = [ -1 10 ]
D [28/Mar/2005:11:58:06 +0000] start_process("/usr/lib/cups/backend/lpd", 0x7fbffee7d0, 0x7fbffed9b0, 9, 10, 8)
I [28/Mar/2005:11:58:06 +0000] Started backend /usr/lib/cups/backend/lpd (PID 6780) for job 16.
D [28/Mar/2005:11:58:06 +0000] ProcessIPPRequest: 5 status_code=0
E [28/Mar/2005:11:58:06 +0000] PID 6779 stopped with status 127!
D [28/Mar/2005:11:58:06 +0000] [Job 16] Page = 612x792; 18,14 to 594,784
D [28/Mar/2005:11:58:06 +0000] [Job 16] slowcollate=0, slowduplex=0, sloworder=0
D [28/Mar/2005:11:58:06 +0000] [Job 16] 0 %%BoundingBox: 0 0 612 792
D [28/Mar/2005:11:58:06 +0000] [Job 16] 0 %%Creator: Mozilla PostScript module (rv:1.7.6/0)
D [28/Mar/2005:11:58:06 +0000] [Job 16] 0 %%DocumentData: Clean8Bit
D [28/Mar/2005:11:58:06 +0000] [Job 16] 0 %%DocumentPaperSizes: Letter
D [28/Mar/2005:11:58:06 +0000] [Job 16] 0 %%Orientation: Portrait
D [28/Mar/2005:11:58:06 +0000] [Job 16] 0 %%Pages: (atend)
D [28/Mar/2005:11:58:06 +0000] [Job 16] 0 %%PageOrder: Ascend
D [28/Mar/2005:11:58:06 +0000] [Job 16] 0 %%EndComments
D [28/Mar/2005:11:58:06 +0000] [Job 16] 0 %%BeginProlog
D [28/Mar/2005:11:58:06 +0000] [Job 16] I850: error while loading shared libraries: libcups.so.2: cannot open shared object file: No such file or directory
D [28/Mar/2005:11:58:07 +0000] CloseClient: 5
D [28/Mar/2005:11:58:07 +0000] [Job 16] 0 %%EndProlog
D [28/Mar/2005:11:58:07 +0000] [Job 16] 0 %%Page: 1 1
D [28/Mar/2005:11:58:07 +0000] [Job 16] 0 %%Page: 1 1
D [28/Mar/2005:11:58:07 +0000] [Job 16] pw = 576.0, pl = 769.3
D [28/Mar/2005:11:58:07 +0000] [Job 16] PageLeft = 18.1, PageRight = 594.1
D [28/Mar/2005:11:58:07 +0000] [Job 16] PageTop = 783.5, PageBottom = 14.2
D [28/Mar/2005:11:58:07 +0000] [Job 16] PageWidth = 612.0, PageLength = 792.0
D [28/Mar/2005:11:58:07 +0000] [Job 16] 0 %%BeginPageSetup
D [28/Mar/2005:11:58:07 +0000] [Job 16] 0 %%EndPageSetup
D [28/Mar/2005:11:58:07 +0000] [Job 16] 0 %%Trailer
D [28/Mar/2005:11:58:07 +0000] [Job 16] Saw Trailer!
D [28/Mar/2005:11:58:07 +0000] [Job 16] Saw EOF!
D [28/Mar/2005:11:58:07 +0000] [Job 16] Connected on ports 515 (local 1023)...
D [28/Mar/2005:11:58:07 +0000] [Job 16] lpd_command 02 lpt1
D [28/Mar/2005:11:58:07 +0000] [Job 16] Sending command string (6 bytes)...
D [28/Mar/2005:11:58:07 +0000] [Job 16] Reading command status...
D [28/Mar/2005:11:58:07 +0000] [Job 16] lpd_command returning 0
D [28/Mar/2005:11:58:07 +0000] [Job 16] Control file is:
D [28/Mar/2005:11:58:07 +0000] [Job 16] Hslacker
D [28/Mar/2005:11:58:07 +0000] [Job 16] Pzak
D [28/Mar/2005:11:58:07 +0000] [Job 16] J_stdin_
D [28/Mar/2005:11:58:07 +0000] [Job 16] ldfA780slacker
D [28/Mar/2005:11:58:07 +0000] [Job 16] UdfA780slacker
D [28/Mar/2005:11:58:07 +0000] [Job 16] N_stdin_
D [28/Mar/2005:11:58:07 +0000] [Job 16] lpd_command 02 62 cfA780slacker
D [28/Mar/2005:11:58:07 +0000] [Job 16] Sending command string (18 bytes)...
D [28/Mar/2005:11:58:07 +0000] [Job 16] Reading command status...
D [28/Mar/2005:11:58:07 +0000] [Job 16] lpd_command returning 0
D [28/Mar/2005:11:58:07 +0000] [Job 16] lpd_command 03 0 dfA780slacker
D [28/Mar/2005:11:58:07 +0000] [Job 16] Sending command string (17 bytes)...
D [28/Mar/2005:11:58:07 +0000] [Job 16] Reading command status...
D [28/Mar/2005:11:58:07 +0000] [Job 16] lpd_command returning 0
D [28/Mar/2005:11:58:07 +0000] UpdateJob: job 16, file 0 is complete.
D [28/Mar/2005:11:58:07 +0000] CancelJob: id = 16
D [28/Mar/2005:11:58:07 +0000] StopJob: id = 16, force = 0
D [28/Mar/2005:11:58:07 +0000] StopJob: printer state is 3


I can see that it is asking for libcups.so.2 but i have that file in /usr/lib

Code:

slacker lib # ls -la libcup*
-rwxr-xr-x  1 root root 222038 Mar 27 20:58 libcups.a
lrwxrwxrwx  1 root root     12 Mar 27 20:58 libcups.so -> libcups.so.2
-rwxr-xr-x  1 root root 126456 Mar 27 20:58 libcups.so.2
-rwxr-xr-x  1 root root 129080 Mar 27 20:58 libcupsimage.a
lrwxrwxrwx  1 root root     17 Mar 27 20:58 libcupsimage.so -> libcupsimage.so.2
-rwxr-xr-x  1 root root  74304 Mar 27 20:58 libcupsimage.so.2
slacker lib #


I am at a loss any one have any help they can give?
Back to top
View user's profile Send private message
plastikman187
Apprentice
Apprentice


Joined: 15 Mar 2005
Posts: 233

PostPosted: Mon Mar 28, 2005 9:22 pm    Post subject: Reply with quote

I fixed this error
Code:
 E [28/Mar/2005:11:57:40 +0000] StartListening: Unable to find IP address for server name "slacker" - Unknown host


But i am still left with
Code:

D [28/Mar/2005:11:58:06 +0000] [Job 16] I850: error while loading shared libraries: libcups.so.2: cannot open shared object file: No such file or directory


I dont know how to fix the second one.
Back to top
View user's profile Send private message
plastikman187
Apprentice
Apprentice


Joined: 15 Mar 2005
Posts: 233

PostPosted: Mon Mar 28, 2005 11:06 pm    Post subject: Reply with quote

bump
Back to top
View user's profile Send private message
plastikman187
Apprentice
Apprentice


Joined: 15 Mar 2005
Posts: 233

PostPosted: Tue Mar 29, 2005 7:12 pm    Post subject: Reply with quote

No one?
Back to top
View user's profile Send private message
geta
Apprentice
Apprentice


Joined: 10 May 2003
Posts: 153

PostPosted: Wed Apr 06, 2005 1:17 am    Post subject: Reply with quote

Permission problems maybe? Some PATH or LIB variable not set? Wild guesses of course ...
_________________
geta - pronounced: "djetta"
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum