| View previous topic :: View next topic |
| Author |
Message |
Uncle_Psychosis
Guru
Joined: 31 Jan 2004
Posts: 387
|
 Posted: Sat Apr 02, 2005 9:58 am Post subject: USB problems with 2.6.10-r6 |
 |
|
Hi guys
I just got a new USB memory stick thing and am trying to get it to work- but I'm failing miserably. I was using 2.6.9-r4 and it wouldn't mount it as vfat for some reason (if I did it as ext2 it was fine, just wouldn't do fat!). Someone mentioned that upgrading to kernel 2.6.10 would fix this, so I decided to give it a try.
Anyway, under 2.6.10 it's even worse. I have all the correct usb and scsi stuff built in (not as modules) to the kernel but now it won't even acknowledge the stick! Also, my digital camera works absolutely fine in 2.6.9 but won't work at all in 2.6.10.
Has anyone got any ideas? I'm not sure what outputs would be helpful for diagnosing the problem so if someone could tell me that would be very useful!
I did notice on boot that I got a lot of errors along the lines of:
usb-hub1.0 connect-debounce failed, port 6 disabled (or similar)
I know its not just one usb port that is knackered because I've tried several!
Anyway, thanks.
Sam |
|
| Back to top |
|
 |
oumpah-pah
Guru
Joined: 18 Jul 2004
Posts: 575
Location: Lausanne, Switzerland
|
| Posted: Sat Apr 02, 2005 11:15 am Post subject: |
|
|
| It really looks like a misconfigured kernel. Could you please post the relevant parts of your .config file and of the dmesg output? |
|
| Back to top |
|
|
Uncle_Psychosis
Guru
Joined: 31 Jan 2004
Posts: 387
|
| Posted: Sun Apr 03, 2005 1:41 pm Post subject: |
|
|
Sure, here we go:
| Code: | .config:
#
# USB support
#
CONFIG_USB=y
CONFIG_USB_DEBUG=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=y
#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
...
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_BLOCK=y
# CONFIG_MMC_WBSD is not set
...
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
CONFIG_DEVFS_DEBUG=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
...
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PATA_PDC2027X is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set |
dmesg:
| Code: | ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
hub 1-0:1.0: debounce: port 6: total 1500ms stable 0ms status 0x100
hub 1-0:1.0: connect-debounce failed, port 6 disabled
hub 1-0:1.0: state 5 ports 6 chg ffc0 evt 0040
hub 1-0:1.0: state 5 ports 6 chg ffc0 evt 0040
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
hub 1-0:1.0: port 6, status 0100, change 0001, 12 Mb/s
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001802 POWER sig=j CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001802 POWER sig=j CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
ehci_hcd 0000:00:02.2: GetStatus port 6 status 001002 POWER sig=se0 CSC
|
|
|
| Back to top |
|
|
Uncle_Psychosis
Guru
Joined: 31 Jan 2004
Posts: 387
|
| Posted: Sun Apr 03, 2005 3:54 pm Post subject: |
|
|
Ok, this is a bit weird. I did some digging and eventually found a hint on some redhat forums. It suggested trying all the different ports, so I did. It appears that now my camera and memory stick will only work in two of my six USB ports (the same two for each) but my USB bluetooth dongle will work in any.
Anyway, I suppose this kind of ties up this thread, I shall start another thread to try and get this new problem sorted!!
New thread:
https://forums.gentoo.org/viewtopic-t-318419.html
Thanks
Sam |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
