| View previous topic :: View next topic |
| Author |
Message |
jsnorman
Tux's lil' helper
Joined: 24 Feb 2005
Posts: 131
|
 Posted: Wed Apr 06, 2005 7:05 pm Post subject: USB Storage Problems |
 |
|
Using kernels 2.6.10-r7, 2.6.11-r5 I can no longer use usb-storage to access what used to be (in the 2.6.9 kernels) supported devices.
I suppose I should find a kernel-usb mailing list, but on the off chance this is specific to Gentoo...
I have tried several devices - two of which (jumpdrive and Dazzle/Orca reader) definitely used to work, the other was definitely working a year or so ago (not sure which kernel).
Devices I have tried:
- Dazzle 4-1 card reader (recognized as Orca reader). I have tried this with a standard 64MB CF card, a 2GB Microdrive, and a 512MB SD card.
- USB-IDE ATAPI-4 Bridge VE-007NHD hard drive interface, hooked up to an old 4GB laptop hard drive
- Lexar JumpDrive 128MB
My system is an iWill Zmaxdp (Nforce 250 Pro) with latest (v. 1.11) firmware, 2x Opteron 240, 1GB Corsair Twinx memory, Maxtor 250GB SATA hard drive.
I have tried loading usb-storage as a module, as well as compiling it into the kernel (output below is from compiiled in attempt) with same results.
I was getting USB over-current errors in dmesg, but flashing to new v 1.11 bios seems to have fixed that ... I guess there is a possibility though that this might be hardware based.
I am able to mount the Dazzle/Orca drive, but get errors when I try to transfer files. I cannot mount the ATAPI-4 device at all (no driver is bound to it according to lsusb) but it is recognized by lsusb. I cannot even see the Jumpdrive when I plug it in (no kernel log message or lsusb event at all).
Here is my kernel log which shows erros from mounted Dazzle/Orca, a plug in event for the ATAPI-4 bridge device, followed by plugging the Dazzle/Orca into a different USB port. I also did an lsusb -v.
Note that i have a USB mouse that works fine, so I THINK my usb ports are okay.
KERNEL LOG:
Apr 6 13:55:02 [kernel] sdb: Current: sense key=0x3
Apr 6 13:55:02 [kernel] ASC=0x11 ASCQ=0x6
Apr 6 13:55:02 [kernel] Info fld=0x0
Apr 6 13:55:02 [kernel] end_request: I/O error, dev sdb, sector 17909
Apr 6 13:55:02 [kernel] Buffer I/O error on device sdb1, logical block 17846
Apr 6 13:55:02 [kernel] usb-storage: queuecommand called
Apr 6 13:55:02 [kernel] usb-storage: *** thread awakened.
Apr 6 13:55:02 [kernel] usb-storage: Command READ_10 (10 bytes)
Apr 6 13:55:02 [kernel] usb-storage: 28 00 00 00 45 f6 00 00 64 00
Apr 6 13:55:02 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cc7f0 L 51200 F 128 Trg 0 LUN 0 CL 10
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 51200 bytes, 13 entries
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 51200/51200
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 13:55:02 [kernel] usb-storage: Attempting to get CSW...
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk status result = 0
Apr 6 13:55:02 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cc7f0 R 0 Stat 0x0
Apr 6 13:55:02 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 13:55:02 [kernel] usb-storage: *** thread sleeping.
Apr 6 13:55:02 [kernel] usb-storage: queuecommand called
Apr 6 13:55:02 [kernel] usb-storage: *** thread awakened.
Apr 6 13:55:02 [kernel] usb-storage: Command READ_10 (10 bytes)
Apr 6 13:55:02 [kernel] usb-storage: 28 00 00 00 46 5a 00 00 80 00
Apr 6 13:55:02 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cc7f1 L 65536 F 128 Trg 0 LUN 0 CL 10
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 65536 bytes, 16 entries
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 65536/65536
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 13:55:02 [kernel] usb-storage: Attempting to get CSW...
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk status result = 0
Apr 6 13:55:02 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cc7f1 R 0 Stat 0x0
Apr 6 13:55:02 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 13:55:02 [kernel] usb-storage: queuecommand called
Apr 6 13:55:02 [kernel] usb-storage: *** thread sleeping.
Apr 6 13:55:02 [kernel] usb-storage: *** thread awakened.
Apr 6 13:55:02 [kernel] usb-storage: Command READ_10 (10 bytes)
Apr 6 13:55:02 [kernel] usb-storage: 28 00 00 00 46 da 00 00 80 00
Apr 6 13:55:02 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cc7f2 L 65536 F 128 Trg 0 LUN 0 CL 10
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 65536 bytes, 16 entries
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 65536/65536
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 13:55:02 [kernel] usb-storage: Attempting to get CSW...
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk status result = 0
Apr 6 13:55:02 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cc7f2 R 0 Stat 0x0
Apr 6 13:55:02 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 13:55:02 [kernel] usb-storage: *** thread sleeping.
Apr 6 13:55:02 [kernel] usb-storage: queuecommand called
Apr 6 13:55:02 [kernel] usb-storage: *** thread awakened.
Apr 6 13:55:02 [kernel] usb-storage: Command READ_10 (10 bytes)
Apr 6 13:55:02 [kernel] usb-storage: 28 00 00 00 47 5a 00 00 80 00
Apr 6 13:55:02 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cc7f3 L 65536 F 128 Trg 0 LUN 0 CL 10
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 65536 bytes, 16 entries
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 65536/65536
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 13:55:02 [kernel] usb-storage: Attempting to get CSW...
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk status result = 0
Apr 6 13:55:02 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cc7f3 R 0 Stat 0x0
Apr 6 13:55:02 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 13:55:02 [kernel] usb-storage: queuecommand called
Apr 6 13:55:02 [kernel] usb-storage: *** thread sleeping.
Apr 6 13:55:02 [kernel] usb-storage: *** thread awakened.
Apr 6 13:55:02 [kernel] usb-storage: Command READ_10 (10 bytes)
Apr 6 13:55:02 [kernel] usb-storage: 28 00 00 00 45 da 00 00 08 00
Apr 6 13:55:02 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cc7f4 L 4096 F 128 Trg 0 LUN 0 CL 10
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 4096/4096
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 13:55:02 [kernel] usb-storage: Attempting to get CSW...
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk status result = 0
Apr 6 13:55:02 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cc7f4 R 0 Stat 0x0
Apr 6 13:55:02 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 13:55:02 [kernel] usb-storage: *** thread sleeping.
Apr 6 13:55:02 [kernel] usb-storage: queuecommand called
Apr 6 13:55:02 [kernel] usb-storage: *** thread awakened.
Apr 6 13:55:02 [kernel] usb-storage: Command WRITE_10 (10 bytes)
Apr 6 13:55:02 [kernel] usb-storage: 2a 00 00 00 02 2a 00 00 01 00
Apr 6 13:55:02 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cc7f5 L 512 F 0 Trg 0 LUN 0 CL 10
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 512/512
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 13:55:02 [kernel] usb-storage: Attempting to get CSW...
Apr 6 13:55:02 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 13:55:02 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 13:55:02 [kernel] usb-storage: -- transfer complete
Apr 6 13:55:02 [kernel] usb-storage: Bulk status result = 0
Apr 6 13:55:02 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cc7f5 R 0 Stat 0x0
Apr 6 13:55:02 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 13:55:02 [kernel] usb-storage: *** thread sleeping.
Apr 6 13:56:03 [kernel] usb-storage: queuecommand called
Apr 6 13:56:03 [kernel] usb-storage: *** thread awakened.
Apr 6 13:56:03 [kernel] usb-storage: Command WRITE_10 (10 bytes)
Apr 6 13:56:03 [kernel] usb-storage: 2a 00 00 00 02 2a 00 00 01 00
Apr 6 13:56:03 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cc812 L 512 F 0 Trg 0 LUN 0 CL 10
Apr 6 13:56:03 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 13:56:03 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 13:56:03 [kernel] usb-storage: -- transfer complete
Apr 6 13:56:03 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 13:56:03 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries
Apr 6 13:56:03 [kernel] usb-storage: Status code 0; transferred 512/512
Apr 6 13:56:03 [kernel] usb-storage: -- transfer complete
Apr 6 13:56:03 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 13:56:03 [kernel] usb-storage: Attempting to get CSW...
Apr 6 13:56:03 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 13:56:04 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 13:56:04 [kernel] usb-storage: -- transfer complete
Apr 6 13:56:04 [kernel] usb-storage: Bulk status result = 0
Apr 6 13:56:04 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cc812 R 0 Stat 0x0
Apr 6 13:56:04 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 13:56:04 [kernel] usb-storage: *** thread sleeping.
Apr 6 13:58:42 [kernel] usb 1-5.1: USB disconnect, address 7
Apr 6 13:58:42 [kernel] usb-storage: storage_disconnect() called
Apr 6 13:58:42 [kernel] usb-storage: usb_stor_stop_transport called
Apr 6 13:58:42 [kernel] usb-storage: -- usb_stor_release_resources
Apr 6 13:58:42 [kernel] usb-storage: -- sending exit command to thread
Apr 6 13:58:42 [kernel] usb-storage: *** thread awakened.
Apr 6 13:58:42 [kernel] usb-storage: -- exit command received
Apr 6 13:58:42 [kernel] usb-storage: -- dissociate_dev
Apr 6 13:58:56 [kernel] usb 3-2.2: new full speed USB device using ohci_hcd and address 5
Apr 6 13:59:44 [kernel] usb 3-1: usbfs: process 489 (lsusb) did not claim interface 0 before use
Apr 6 14:01:30 [kernel] usb 1-5.2: new full speed USB device using ehci_hcd and address 8
Apr 6 14:01:30 [kernel] usb-storage: USB Mass Storage device detected
Apr 6 14:01:30 [kernel] usb-storage: -- associate_dev
Apr 6 14:01:30 [kernel] usb-storage: Vendor: 0x04e6, Product: 0x0325, Revision: 0x0503
Apr 6 14:01:30 [kernel] usb-storage: Interface Subclass: 0x06, Protocol: 0x50
Apr 6 14:01:30 [kernel] usb-storage: Vendor: SCM Microsystems Inc., Product: eUSB ORCA Quad Reader
Apr 6 14:01:30 [kernel] usb-storage: Transport: Bulk
Apr 6 14:01:30 [kernel] usb-storage: Protocol: Transparent SCSI
Apr 6 14:01:30 [kernel] usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Apr 6 14:01:30 [kernel] usb-storage: GetMaxLUN command result is 1, data is 1
Apr 6 14:01:30 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:30 [kernel] scsi5 : SCSI emulation for USB Mass Storage devices
Apr 6 14:01:30 [kernel] usb-storage: device found at 8
Apr 6 14:01:30 [kernel] usb-storage: waiting for device to settle before scanning
Apr 6 14:01:35 [kernel] usb-storage: queuecommand called
Apr 6 14:01:35 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:35 [kernel] usb-storage: Command INQUIRY (6 bytes)
Apr 6 14:01:35 [kernel] usb-storage: 12 00 00 00 24 00
Apr 6 14:01:35 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce30 L 36 F 128 Trg 0 LUN 0 CL 6
Apr 6 14:01:35 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:35 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:35 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:35 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:35 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
Apr 6 14:01:35 [kernel] usb-storage: Status code 0; transferred 36/36
Apr 6 14:01:35 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:35 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 14:01:35 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:35 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:35 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:35 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:35 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:35 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce30 R 0 Stat 0x0
Apr 6 14:01:35 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 14:01:35 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:35 [kernel] Vendor: eUSB Model: Compact Flash Rev: 5.03
Apr 6 14:01:35 [kernel] Type: Direct-Access ANSI SCSI revision: 02
Apr 6 14:01:35 [kernel] usb-storage: queuecommand called
Apr 6 14:01:35 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:35 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Apr 6 14:01:35 [kernel] usb-storage: 00 00 00 00 00 00
Apr 6 14:01:35 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce31 L 0 F 0 Trg 0 LUN 0 CL 6
Apr 6 14:01:35 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:35 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:35 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:35 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:35 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:35 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce31 R 0 Stat 0x1
Apr 6 14:01:38 [kernel] usb-storage: -- transport indicates command failure
Apr 6 14:01:38 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x801cce31 L 18 F 128 Trg 0 LUN 0 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 18/18
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x801cce31 R 0 Stat 0x0
Apr 6 14:01:38 [kernel] usb-storage: -- Result from auto-sense is 0
Apr 6 14:01:38 [kernel] usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
Apr 6 14:01:38 [kernel] usb-storage: (Unknown Key): (unknown ASC/ASCQ)
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x2
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Apr 6 14:01:38 [kernel] usb-storage: 00 00 00 00 00 00
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce33 L 0 F 0 Trg 0 LUN 0 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce33 R 0 Stat 0x1
Apr 6 14:01:38 [kernel] usb-storage: -- transport indicates command failure
Apr 6 14:01:38 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x801cce33 L 18 F 128 Trg 0 LUN 0 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 18/18
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x801cce33 R 0 Stat 0x0
Apr 6 14:01:38 [kernel] usb-storage: -- Result from auto-sense is 0
Apr 6 14:01:38 [kernel] usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0
Apr 6 14:01:38 [kernel] usb-storage: (Unknown Key): (unknown ASC/ASCQ)
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x2
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Apr 6 14:01:38 [kernel] usb-storage: 00 00 00 00 00 00
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce34 L 0 F 0 Trg 0 LUN 0 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce34 R 0 Stat 0x0
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Command READ_CAPACITY (10 bytes)
Apr 6 14:01:38 [kernel] usb-storage: 25 00 00 00 00 00 00 00 00 00
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce35 L 8 F 128 Trg 0 LUN 0 CL 10
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 8/8
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce35 R 0 Stat 0x0
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] SCSI device sdb: 3999744 512-byte hdwr sectors (2048 MB)
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Command MODE_SENSE (6 bytes)
Apr 6 14:01:38 [kernel] usb-storage: 1a 00 3f 00 c0 00
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce36 L 192 F 128 Trg 0 LUN 0 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 192 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code -32; transferred 64/192
Apr 6 14:01:38 [kernel] usb-storage: clearing endpoint halt for pipe 0xc0010880
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_clear_halt: result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk data transfer result 0x2
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce36 R 128 Stat 0x0
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] sdb: Write Protect is off
Apr 6 14:01:38 [kernel] sdb: Mode Sense: 3f 00 00 08
Apr 6 14:01:38 [kernel] sdb: assuming drive cache: write through
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Apr 6 14:01:38 [kernel] usb-storage: 00 00 00 00 00 00
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce37 L 0 F 0 Trg 0 LUN 0 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce37 R 0 Stat 0x0
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
Apr 6 14:01:38 [kernel] usb-storage: 1e 00 00 00 01 00
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce38 L 0 F 0 Trg 0 LUN 0 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce38 R 0 Stat 0x1
Apr 6 14:01:38 [kernel] usb-storage: -- transport indicates command failure
Apr 6 14:01:38 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x801cce38 L 18 F 128 Trg 0 LUN 0 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 18/18
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x801cce38 R 0 Stat 0x0
Apr 6 14:01:38 [kernel] usb-storage: -- Result from auto-sense is 0
Apr 6 14:01:38 [kernel] usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
Apr 6 14:01:38 [kernel] usb-storage: (Unknown Key): (unknown ASC/ASCQ)
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x2
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Apr 6 14:01:38 [kernel] usb-storage: 00 00 00 00 00 00
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce39 L 0 F 0 Trg 0 LUN 0 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce39 R 0 Stat 0x0
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Command READ_CAPACITY (10 bytes)
Apr 6 14:01:38 [kernel] usb-storage: 25 00 00 00 00 00 00 00 00 00
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce3a L 8 F 128 Trg 0 LUN 0 CL 10
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 8/8
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce3a R 0 Stat 0x0
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] SCSI device sdb: 3999744 512-byte hdwr sectors (2048 MB)
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Command MODE_SENSE (6 bytes)
Apr 6 14:01:38 [kernel] usb-storage: 1a 00 3f 00 c0 00
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce3b L 192 F 128 Trg 0 LUN 0 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 192 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code -32; transferred 64/192
Apr 6 14:01:38 [kernel] usb-storage: clearing endpoint halt for pipe 0xc0010880
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_clear_halt: result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk data transfer result 0x2
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce3b R 128 Stat 0x0
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] sdb: Write Protect is off
Apr 6 14:01:38 [kernel] sdb: Mode Sense: 3f 00 00 08
Apr 6 14:01:38 [kernel] sdb: assuming drive cache: write through
Apr 6 14:01:38 [kernel] /dev/scsi/host5/bus0/target0/lun0:<7>usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Command READ_10 (10 bytes)
Apr 6 14:01:38 [kernel] usb-storage: 28 00 00 00 00 00 00 00 08 00
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce3c L 4096 F 128 Trg 0 LUN 0 CL 10
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 4096/4096
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce3c R 0 Stat 0x0
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] p1
Apr 6 14:01:38 [kernel] Attached scsi removable disk sdb at scsi5, channel 0, id 0, lun 0
Apr 6 14:01:38 [kernel] Attached scsi generic sg1 at scsi5, channel 0, id 0, lun 0, type 0
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Command INQUIRY (6 bytes)
Apr 6 14:01:38 [kernel] usb-storage: 12 20 00 00 24 00
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce3d L 36 F 128 Trg 0 LUN 1 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 36/36
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce3d R 0 Stat 0x0
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x0
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] Vendor: eUSB Model: SD-MS-SM Rev: 5.03
Apr 6 14:01:38 [kernel] Type: Direct-Access ANSI SCSI revision: 02
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Apr 6 14:01:38 [kernel] usb-storage: 00 20 00 00 00 00
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce3e L 0 F 0 Trg 0 LUN 1 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce3e R 0 Stat 0x1
Apr 6 14:01:38 [kernel] usb-storage: -- transport indicates command failure
Apr 6 14:01:38 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x801cce3e L 18 F 128 Trg 0 LUN 1 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 18/18
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x801cce3e R 0 Stat 0x0
Apr 6 14:01:38 [kernel] usb-storage: -- Result from auto-sense is 0
Apr 6 14:01:38 [kernel] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Apr 6 14:01:38 [kernel] usb-storage: (Unknown Key): (unknown ASC/ASCQ)
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x2
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Apr 6 14:01:38 [kernel] usb-storage: 00 20 00 00 00 00
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce3f L 0 F 0 Trg 0 LUN 1 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce3f R 0 Stat 0x1
Apr 6 14:01:38 [kernel] usb-storage: -- transport indicates command failure
Apr 6 14:01:38 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x801cce3f L 18 F 128 Trg 0 LUN 1 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 18/18
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x801cce3f R 0 Stat 0x0
Apr 6 14:01:38 [kernel] usb-storage: -- Result from auto-sense is 0
Apr 6 14:01:38 [kernel] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Apr 6 14:01:38 [kernel] usb-storage: (Unknown Key): (unknown ASC/ASCQ)
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x2
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Command TEST_UNIT_READY (6 bytes)
Apr 6 14:01:38 [kernel] usb-storage: 00 20 00 00 00 00
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x1cce40 L 0 F 0 Trg 0 LUN 1 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x1cce40 R 0 Stat 0x1
Apr 6 14:01:38 [kernel] usb-storage: -- transport indicates command failure
Apr 6 14:01:38 [kernel] usb-storage: Issuing auto-REQUEST_SENSE
Apr 6 14:01:38 [kernel] usb-storage: Bulk Command S 0x43425355 T 0x801cce40 L 18 F 128 Trg 0 LUN 1 CL 6
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 31/31
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk command transfer result=0
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 18/18
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk data transfer result 0x0
Apr 6 14:01:38 [kernel] usb-storage: Attempting to get CSW...
Apr 6 14:01:38 [kernel] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Apr 6 14:01:38 [kernel] usb-storage: Status code 0; transferred 13/13
Apr 6 14:01:38 [kernel] usb-storage: -- transfer complete
Apr 6 14:01:38 [kernel] usb-storage: Bulk status result = 0
Apr 6 14:01:38 [kernel] usb-storage: Bulk Status S 0x53425355 T 0x801cce40 R 0 Stat 0x0
Apr 6 14:01:38 [kernel] usb-storage: -- Result from auto-sense is 0
Apr 6 14:01:38 [kernel] usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Apr 6 14:01:38 [kernel] usb-storage: (Unknown Key): (unknown ASC/ASCQ)
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x2
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] Attached scsi removable disk sdc at scsi5, channel 0, id 0, lun 1
Apr 6 14:01:38 [kernel] Attached scsi generic sg2 at scsi5, channel 0, id 0, lun 1, type 0
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Bad LUN (0:2)
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x40000
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Bad target number (1:0)
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x40000
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Bad target number (2:0)
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x40000
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Bad target number (3:0)
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x40000
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Bad target number (4:0)
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x40000
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Bad target number (5:0)
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x40000
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Bad target number (6:0)
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x40000
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: queuecommand called
Apr 6 14:01:38 [kernel] usb-storage: *** thread awakened.
Apr 6 14:01:38 [kernel] usb-storage: Bad target number (7:0)
Apr 6 14:01:38 [kernel] usb-storage: scsi cmd done, result=0x40000
Apr 6 14:01:38 [kernel] usb-storage: *** thread sleeping.
Apr 6 14:01:38 [kernel] usb-storage: device scan complete
lsusb -v output:
Bus 003 Device 005: ID 067b:2307 Prolific Technology, Inc. PL2307 USB-ATAPI4 Bridge
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x067b Prolific Technology, Inc.
idProduct 0x2307 PL2307 USB-ATAPI4 Bridge
bcdDevice 1.00
iManufacturer 1 Prolific Technology Inc.
iProduct 2 ATAPI-4 Bridge Controller
iSerial 3 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 7
bInterval 1
Language IDs: (length=4)
0409 English(US)
Bus 003 Device 003: ID 03eb:3301 Atmel Corp. 4-port Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x03eb Atmel Corp.
idProduct 0x3301 4-port Hub
bcdDevice 3.00
iManufacturer 0
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 64mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 1
bInterval 255
Language IDs: (length=4)
0409 English(US)
Bus 003 Device 002: ID 047d:1025 Kensington
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x047d Kensington
idProduct 0x1025
bcdDevice 1.00
iManufacturer 1 Kensington
iProduct 2 Kensington USB Mouse
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4
bmAttributes 0xa0
Remote Wakeup
MaxPower 50mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 66
cannot get report descriptor
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 10
Language IDs: (length=4)
0409 English(US)
Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.11-gentoo-r5 ohci_hcd
iProduct 2 PCI device 10de:00e7 (nVidia Corporation)
iSerial 1 0000:00:02.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=4)
0409 English(US)
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.11-gentoo-r5 ohci_hcd
iProduct 2 PCI device 10de:00e7 (nVidia Corporation)
iSerial 1 0000:00:02.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=4)
0409 English(US)
Bus 001 Device 008: ID 04e6:0325 SCM Microsystems, Inc. eUSB ORCA Quad Reader
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 16
idVendor 0x04e6 SCM Microsystems, Inc.
idProduct 0x0325 eUSB ORCA Quad Reader
bcdDevice 5.03
iManufacturer 1
iProduct 2
iSerial 5
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 3
bmAttributes 0x80
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Language IDs: (length=4)
0409 English(US)
Bus 001 Device 004: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Language IDs: none (cannot get min. string descriptor; got len=-1, error=32:Broken pipe)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 2 TT per port
bMaxPacketSize0 64
idVendor 0x04b4 Cypress Semiconductor Corp.
idProduct 0x6560 CY7C65640 USB-2.0 "TetraHub"
bcdDevice 0.09
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 1 Single TT
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 1
bInterval 12
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 2 TT per port
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 1
bInterval 12
Language IDs: none (cannot get min. string descriptor; got len=-1, error=32:Broken pipe)
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.11-gentoo-r5 ehci_hcd
iProduct 2 PCI device 10de:00e8 (nVidia Corporation)
iSerial 1 0000:00:02.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 12
Language IDs: (length=4)
0409 English(US) |
|
| Back to top |
|
 |
meowsqueak
Veteran
Joined: 26 Aug 2003
Posts: 1549
Location: New Zealand
|
| Posted: Thu Apr 07, 2005 11:25 am Post subject: |
|
|
Well, I don't know if my problem is related, but I just got back from an overseas holiday and I can't transfer the files reliably from my SD card (via the camera) using usb-storage. It seems to just hang after about 10 files or so. If I turn off the camera, the cp process terminates silently and I can turn the camera back on and re-mount and continue the cp from there, but it's a pain and leaves the last file at 0 bytes.
Happens with linux-2.6.8.1 and -2.6.11.6. Used to work with 2.6.8.1.
dmesg shows:
| Quote: | usb 1-1.3: new full speed USB device using ehci_hcd and address 4
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
Vendor: SAMSUNG Model: DIGIMAX V4 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 499712 512-byte hdwr sectors (256 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
SCSI device sda: 499712 512-byte hdwr sectors (256 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
usb-storage: device scan complete
usb 1-1.3: reset full speed USB device using ehci_hcd and address 4
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 322
Buffer I/O error on device sda1, logical block 227
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 323
Buffer I/O error on device sda1, logical block 228
lost page write due to I/O error on sda1
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 150368
Buffer I/O error on device sda1, logical block 150273
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 150369
Buffer I/O error on device sda1, logical block 150274
SCSI error : <0 0 0 0> return code = 0x70000
... |
|
|
| Back to top |
|
|
Borgond
n00b
Joined: 31 May 2002
Posts: 57
Location: Mannheim / Germany
|
| Posted: Thu Oct 06, 2005 7:37 am Post subject: |
|
|
Hi folks,
did you have any luck getting usb-storage to work again properly?
I bought a USB 2.0 Hub yesterday and I am currently running into similar problems as meowsqueak.
The type of the Hub is:
| Code: | | Bus 001 Device 114: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub" |
I've connected my digital camera and an external USB 2.0 HDD to the Hub. Initially the devices are recognized, I am able to mount them - seems to work fine. After transfering (a little bit) of data the devices get disconnected, and are found afterwards immediately again - changing device mappings e.g. from sda to sdb and sdc to sdd ... that is really annoying ;-(
Connecting the devices directly to the computer did work fine - without problems.
Supplied with the USB Hub was an extra mains adaptor - the things i mentioned happen with, and without the adaptor plugged in.
Would be great if anybody out there had an idea.
so long,
Borgond
_________________
registered Linux User #358250 - http://counter.li.org/
borgond@jabber.ccc.de |
|
| Back to top |
|
|
meowsqueak
Veteran
Joined: 26 Aug 2003
Posts: 1549
Location: New Zealand
|
| Posted: Thu Oct 06, 2005 9:47 am Post subject: |
|
|
I wasn't able to get the camera working but an SD card reader worked OK. My camera seemed to work OK with older Linux kernels. I also have a little flash-based mp3 player that refuses to work properly via USB on two Linux machines I have. It also doesn't work if those machines boot Windows XP. However the device works fine on another older machine with USB 1.1.
*shrug*  |
|
| Back to top |
|
|
Borgond
n00b
Joined: 31 May 2002
Posts: 57
Location: Mannheim / Germany
|
| Posted: Thu Oct 06, 2005 7:54 pm Post subject: |
|
|
Hi there,
the camera works flawlessly if directly plugged into the computer's USB Port.
NOW WHAT THE HECK!! 
That's incredible - I just wanted to log everything thoroughly and reconnected everything from scratch ... now the error doesn't happen again - it just happened every single time I tried it before ,-((
Now I was able to read the Camera data - no disconnections - I tried hdparm -t on both devices (Camera & external HDD)
| Code: |
# hdparm -t /dev/sdc1
/dev/sdc1:
Timing buffered disk reads: 84 MB in 3.05 seconds = 27.53 MB/sec
# hdparm -t /dev/sdd1
/dev/sdd1:
Timing buffered disk reads: 4 MB in 5.16 seconds = 793.46 kB/sec
|
worked fine ... argh - I hate it when such things happen and you can't explain why ...
| Code: | Oct 6 21:16:32 fry usb 1-4: new high speed USB device using ehci_hcd and address 50
Oct 6 21:16:32 fry hub 1-4:1.0: USB hub found
Oct 6 21:16:32 fry hub 1-4:1.0: 4 ports detected
Oct 6 21:16:32 fry usb 1-4.1: new high speed USB device using ehci_hcd and address 51
Oct 6 21:16:32 fry scsi173 : SCSI emulation for USB Mass Storage devices
Oct 6 21:16:32 fry usb-storage: device found at 51
Oct 6 21:16:32 fry usb-storage: waiting for device to settle before scanning
Oct 6 21:16:32 fry usb 1-4.4: new full speed USB device using ehci_hcd and address 52
Oct 6 21:16:32 fry usb 1-4.4: configuration #1 chosen from 2 choices
Oct 6 21:16:32 fry scsi174 : SCSI emulation for USB Mass Storage devices
Oct 6 21:16:32 fry usb-storage: device found at 52
Oct 6 21:16:32 fry usb-storage: waiting for device to settle before scanning
Oct 6 21:16:32 fry usb.agent[402]: Keeping default configuration with /sys//devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4
Oct 6 21:16:37 fry Vendor: WDC WD25 Model: 00BB-00GUA0 Rev: 0 0
Oct 6 21:16:37 fry Type: Direct-Access ANSI SCSI revision: 00
Oct 6 21:16:37 fry SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
Oct 6 21:16:37 fry sdc: assuming drive cache: write through
Oct 6 21:16:37 fry SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
Oct 6 21:16:37 fry sdc: assuming drive cache: write through
Oct 6 21:16:37 fry sdc: sdc1 sdc2 sdc3
Oct 6 21:16:37 fry Attached scsi disk sdc at scsi173, channel 0, id 0, lun 0
Oct 6 21:16:37 fry Attached scsi generic sg0 at scsi173, channel 0, id 0, lun 0, type 0
Oct 6 21:16:37 fry usb-storage: device scan complete
Oct 6 21:16:37 fry scsi.agent[458]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1:1.0/host173/target173:0:0/173:0:0:0
Oct 6 21:16:37 fry Vendor: Casio Model: QV DigitalCamera Rev: 1000
Oct 6 21:16:37 fry Type: Direct-Access ANSI SCSI revision: 02
Oct 6 21:16:37 fry SCSI device sdd: 2012160 512-byte hdwr sectors (1030 MB)
Oct 6 21:16:37 fry sdd: Write Protect is off
Oct 6 21:16:37 fry sdd: Mode Sense: 00 46 02 00
Oct 6 21:16:37 fry sdd: assuming drive cache: write through
Oct 6 21:16:37 fry SCSI device sdd: 2012160 512-byte hdwr sectors (1030 MB)
Oct 6 21:16:37 fry sdd: Write Protect is off
Oct 6 21:16:37 fry sdd: Mode Sense: 00 46 02 00
Oct 6 21:16:37 fry sdd: assuming drive cache: write through
Oct 6 21:16:37 fry sdd: sdd1
Oct 6 21:16:37 fry Attached scsi removable disk sdd at scsi174, channel 0, id 0, lun 0
Oct 6 21:16:37 fry Attached scsi generic sg1 at scsi174, channel 0, id 0, lun 0, type 0
Oct 6 21:16:37 fry usb-storage: device scan complete
Oct 6 21:16:37 fry scsi.agent[521]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.0/host174/target174:0:0/174:0:0:0
Oct 6 21:16:49 fry su(pam_unix)[595]: session opened for user root by (uid=1000)
Oct 6 21:17:25 fry ReiserFS: sdc1: found reiserfs format "3.6" with standard journal
Oct 6 21:17:26 fry ReiserFS: sdc1: using ordered data mode
Oct 6 21:17:26 fry ReiserFS: sdc1: journal params: device sdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct 6 21:17:26 fry ReiserFS: sdc1: checking transaction log (sdc1)
Oct 6 21:17:26 fry ReiserFS: sdc1: replayed 3 transactions in 0 seconds
Oct 6 21:17:26 fry ReiserFS: sdc1: Using r5 hash to sort names |
Now it crashed again ... ;-(, after inserting my usbstick .. this is a mess ...
| Code: | Oct 6 21:43:40 fry scsi.agent[974]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.3/1-4.3:1.0/host175/target175:0:0/175:0:0:0
Oct 6 21:44:35 fry scsi0 (0:0): rejecting I/O to dead device
Oct 6 21:44:35 fry scsi0 (0:0): rejecting I/O to dead device
Oct 6 21:44:52 fry scsi0 (0:0): rejecting I/O to dead device
Oct 6 21:45:50 fry usb 1-4: USB disconnect, address 50
Oct 6 21:45:50 fry usb 1-4.1: USB disconnect, address 51
Oct 6 21:45:50 fry scsi173 (0:0): rejecting I/O to device being removed
Oct 6 21:45:50 fry Buffer I/O error on device sdc1, logical block 633
Oct 6 21:45:50 fry lost page write due to I/O error on sdc1
Oct 6 21:45:50 fry Buffer I/O error on device sdc1, logical block 634
Oct 6 21:45:50 fry lost page write due to I/O error on sdc1
Oct 6 21:45:50 fry scsi173 (0:0): rejecting I/O to device being removed
Oct 6 21:45:50 fry Buffer I/O error on device sdc1, logical block 635
Oct 6 21:45:50 fry lost page write due to I/O error on sdc1
Oct 6 21:45:50 fry REISERFS: abort (device sdc1): Journal write error in flush_commit_list
Oct 6 21:45:50 fry REISERFS: Aborting journal for filesystem on sdc1
Oct 6 21:45:50 fry usb 1-4.3: USB disconnect, address 53
Oct 6 21:45:50 fry scsi175 (0:0): rejecting I/O to device being removed
Oct 6 21:45:50 fry Buffer I/O error on device sde1, logical block 533
Oct 6 21:45:50 fry lost page write due to I/O error on sde1
Oct 6 21:45:50 fry Buffer I/O error on device sde1, logical block 534
Oct 6 21:45:50 fry lost page write due to I/O error on sde1
Oct 6 21:45:50 fry Buffer I/O error on device sde1, logical block 535
Oct 6 21:45:50 fry lost page write due to I/O error on sde1
Oct 6 21:45:50 fry Buffer I/O error on device sde1, logical block 536
Oct 6 21:45:50 fry lost page write due to I/O error on sde1
Oct 6 21:45:50 fry Buffer I/O error on device sde1, logical block 537
Oct 6 21:45:50 fry lost page write due to I/O error on sde1
Oct 6 21:45:50 fry Buffer I/O error on device sde1, logical block 538
Oct 6 21:45:50 fry lost page write due to I/O error on sde1
Oct 6 21:45:50 fry Buffer I/O error on device sde1, logical block 539
Oct 6 21:45:50 fry lost page write due to I/O error on sde1
Oct 6 21:45:50 fry usb 1-4.4: USB disconnect, address 52
Oct 6 21:45:51 fry usb 1-4: new high speed USB device using ehci_hcd and address 54
Oct 6 21:45:51 fry hub 1-4:1.0: USB hub found
Oct 6 21:45:51 fry hub 1-4:1.0: 4 ports detected
Oct 6 21:45:51 fry usb 1-4.1: new high speed USB device using ehci_hcd and address 55
Oct 6 21:45:51 fry scsi176 : SCSI emulation for USB Mass Storage devices
Oct 6 21:45:51 fry usb-storage: device found at 55
Oct 6 21:45:51 fry usb-storage: waiting for device to settle before scanning
Oct 6 21:45:51 fry usb 1-4.3: new full speed USB device using ehci_hcd and address 56
Oct 6 21:45:51 fry scsi177 : SCSI emulation for USB Mass Storage devices
Oct 6 21:45:51 fry usb-storage: device found at 56
Oct 6 21:45:51 fry usb-storage: waiting for device to settle before scanning
Oct 6 21:45:51 fry usb 1-4.4: new full speed USB device using ehci_hcd and address 57
Oct 6 21:45:51 fry usb 1-4.4: configuration #1 chosen from 2 choices
Oct 6 21:45:51 fry usb.agent[1445]: Keeping default configuration with /sys//devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4
Oct 6 21:45:51 fry scsi178 : SCSI emulation for USB Mass Storage devices
Oct 6 21:45:51 fry usb-storage: device found at 57
Oct 6 21:45:51 fry usb-storage: waiting for device to settle before scanning
Oct 6 21:45:56 fry Vendor: WDC WD25 Model: 00BB-00GUA0 Rev: 0 0
Oct 6 21:45:56 fry Type: Direct-Access ANSI SCSI revision: 00
Oct 6 21:45:56 fry SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB)
Oct 6 21:45:56 fry sdf: assuming drive cache: write through
Oct 6 21:45:56 fry SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB)
Oct 6 21:45:56 fry sdf: assuming drive cache: write through
Oct 6 21:45:56 fry sdf: sdf1 sdf2 sdf3
Oct 6 21:45:56 fry Attached scsi disk sdf at scsi176, channel 0, id 0, lun 0
Oct 6 21:45:56 fry Attached scsi generic sg0 at scsi176, channel 0, id 0, lun 0, type 0
Oct 6 21:45:56 fry usb-storage: device scan complete
Oct 6 21:45:56 fry scsi.agent[1534]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1:1.0/host176/target176:0:0/176:0:0:0
Oct 6 21:45:56 fry Vendor: 3SYSTEM Model: USB FLASH DISK Rev: 1.00
Oct 6 21:45:56 fry Type: Direct-Access ANSI SCSI revision: 02
Oct 6 21:45:56 fry SCSI device sdg: 512000 512-byte hdwr sectors (262 MB)
Oct 6 21:45:56 fry sdg: Write Protect is off
Oct 6 21:45:56 fry sdg: Mode Sense: 0b 00 00 08
Oct 6 21:45:56 fry sdg: assuming drive cache: write through
Oct 6 21:45:56 fry SCSI device sdg: 512000 512-byte hdwr sectors (262 MB)
Oct 6 21:45:56 fry sdg: Write Protect is off
Oct 6 21:45:56 fry sdg: Mode Sense: 0b 00 00 08
Oct 6 21:45:56 fry sdg: assuming drive cache: write through
Oct 6 21:45:56 fry sdg: sdg1
Oct 6 21:45:56 fry Attached scsi removable disk sdg at scsi177, channel 0, id 0, lun 0
Oct 6 21:45:56 fry Attached scsi generic sg1 at scsi177, channel 0, id 0, lun 0, type 0
Oct 6 21:45:56 fry usb-storage: device scan complete
Oct 6 21:45:56 fry scsi.agent[1604]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.3/1-4.3:1.0/host177/target177:0:0/177:0:0:0
Oct 6 21:45:56 fry Vendor: Casio Model: QV DigitalCamera Rev: 1000
Oct 6 21:45:56 fry Type: Direct-Access ANSI SCSI revision: 02
Oct 6 21:45:56 fry SCSI device sdh: 2012160 512-byte hdwr sectors (1030 MB)
Oct 6 21:45:56 fry sdh: Write Protect is off
Oct 6 21:45:56 fry sdh: Mode Sense: 00 46 02 00
Oct 6 21:45:56 fry sdh: assuming drive cache: write through
Oct 6 21:45:56 fry SCSI device sdh: 2012160 512-byte hdwr sectors (1030 MB)
Oct 6 21:45:56 fry sdh: Write Protect is off
Oct 6 21:45:56 fry sdh: Mode Sense: 00 46 02 00
Oct 6 21:45:56 fry sdh: assuming drive cache: write through
Oct 6 21:45:56 fry sdh: sdh1
Oct 6 21:45:56 fry Attached scsi removable disk sdh at scsi178, channel 0, id 0, lun 0
Oct 6 21:45:56 fry Attached scsi generic sg2 at scsi178, channel 0, id 0, lun 0, type 0
Oct 6 21:45:56 fry usb-storage: device scan complete
Oct 6 21:45:56 fry scsi.agent[1679]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.0/host178/target178:0:0/178:0:0:0
Oct 6 21:46:22 fry scsi173 (0:0): rejecting I/O to dead device
Oct 6 21:46:22 fry ReiserFS: sdc1: warning: zam-7001: io error in reiserfs_find_entry
|
any ideas? ,-(
thnx in advance,
Borgond
_________________
registered Linux User #358250 - http://counter.li.org/
borgond@jabber.ccc.de |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
