| View previous topic :: View next topic |
| Author |
Message |
Palmax Maverick
Guru
Joined: 14 Oct 2004
Posts: 339
|
 Posted: Mon May 22, 2006 6:16 pm Post subject: [alsa/ati-drivers] Si tengo aceleración se rompe alsa(close |
 |
|
Buenas tardes
Hace mucho que he querido postear este post, antes hice un intento de solución pero no funcionó así que comento mi caso.
He estado googleando bastante y no he encontrado nada parecido a lo que me pasa, así que para mi que meteré la pata en alguna configuración o algo...
Veamos, el tema es que si intento tener aceleración 3D (via ati-drivers) "se me rompe alsa":
| Quote: | fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 927 MBytes.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 23 (level, low) -> IRQ 217
[fglrx] module loaded - fglrx 8.24.8 [Apr 11 2006] on minor 0
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] Kernel AGP support doesn't provide agplock functionality.
[fglrx] AGP detected, AgpState = 0x1f004a1b (hardware caps of chipset)
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps)
[fglrx] free AGP = 121909248
[fglrx] max AGP = 121909248
[fglrx] free LFB = 108974080
[fglrx] max LFB = 108974080
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total AGP = 32768
irq 185: nobody cared (try booting with the "irqpoll" option)
[<b01350d2>] __report_bad_irq+0x31/0x74
[<b01351aa>] note_interrupt+0x7d/0xa3
[<b0134bac>] __do_IRQ+0xa9/0xdd
[<b01045b9>] do_IRQ+0x19/0x24
[<b0103222>] common_interrupt+0x1a/0x20
[<b0100b4c>] default_idle+0x0/0x55
[<b0100b78>] default_idle+0x2c/0x55
[<b0100c0f>] cpu_idle+0x5a/0x75
[<b047e769>] start_kernel+0x194/0x196
handlers:
[<b031169a>] (snd_intel8x0_interrupt+0x0/0x1e5)
[<b0313b91>] (snd_intel8x0_interrupt+0x0/0x1ba)
Disabling IRQ #185
|
Como veis me deshabilita el IRQ de mi tarjeta de sonido, aunque no entiendo el por qué. ¡Ah! lo del polling, además de hacer más lento el sistema no lo resuelve
Además nada más iniciar me aparecen unos warnings de cuando tenía alsa mediante el driver, y luego como módulo del kernel (ya que en mi afán de intentar solucionarlo lo tengo ahora dentro del kernel).
Estos warnings es por intentar poner modulos que están en el kernel. La cuestión es que en automodules no tengo q lo lance, además hice un rc-update del alsasound. He mirado en el modules.autoload.d/kernel-2.6 y no lo tengo dentro (lo tendré en otra parte? donde?).
| Quote: | snd_page_alloc: exports duplicate symbol snd_dma_alloc_pages (owned by kernel)
snd: exports duplicate symbol snd_major (owned by kernel)
snd_timer: Unknown symbol snd_verbose_printk
snd_pcm: Unknown symbol snd_verbose_printk
snd_ac97_bus: exports duplicate symbol ac97_bus_type (owned by kernel)
snd_ac97_codec: Unknown symbol snd_verbose_printk
snd_intel8x0: Unknown symbol snd_verbose_printk
snd: exports duplicate symbol snd_major (owned by kernel)
snd_seq_device: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_verbose_printk
snd_seq: Unknown symbol snd_verbose_printk
snd_seq_oss: Unknown symbol snd_verbose_printk
snd: exports duplicate symbol snd_major (owned by kernel)
snd_mixer_oss: Unknown symbol snd_verbose_printk
snd_page_alloc: exports duplicate symbol snd_dma_alloc_pages (owned by kernel)
snd_timer: Unknown symbol snd_verbose_printk
snd_pcm: Unknown symbol snd_verbose_printk
snd_pcm_oss: Unknown symbol snd_verbose_printk
snd: exports duplicate symbol snd_major (owned by kernel)
snd_mixer_oss: Unknown symbol snd_verbose_printk
snd: exports duplicate symbol snd_major (owned by kernel)
snd_seq_device: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_verbose_printk
snd_seq: Unknown symbol snd_verbose_printk
snd_page_alloc: exports duplicate symbol snd_dma_alloc_pages (owned by kernel)
snd: exports duplicate symbol snd_major (owned by kernel)
snd_timer: Unknown symbol snd_verbose_printk
snd_pcm: Unknown symbol snd_verbose_printk
snd_ac97_bus: exports duplicate symbol ac97_bus_type (owned by kernel)
snd_ac97_codec: Unknown symbol snd_verbose_printk
snd_intel8x0: Unknown symbol snd_verbose_printk
snd: exports duplicate symbol snd_major (owned by kernel)
snd_seq_device: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_verbose_printk
snd_seq: Unknown symbol snd_verbose_printk
snd_seq_oss: Unknown symbol snd_verbose_printk
snd: exports duplicate symbol snd_major (owned by kernel)
snd_mixer_oss: Unknown symbol snd_verbose_printk
snd_page_alloc: exports duplicate symbol snd_dma_alloc_pages (owned by kernel)
snd_timer: Unknown symbol snd_verbose_printk
snd_pcm: Unknown symbol snd_verbose_printk
snd_pcm_oss: Unknown symbol snd_verbose_printk
snd: exports duplicate symbol snd_major (owned by kernel)
snd_mixer_oss: Unknown symbol snd_verbose_printk
snd: exports duplicate symbol snd_major (owned by kernel)
snd_seq_device: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_verbose_printk
snd_seq: Unknown symbol snd_verbose_printk
|
Esto lo saca igualito via:
| Quote: | # /etc/init.d/alsasound restart
* Storing ALSA Mixer Levels ... [ ok ]
* Unloading ALSA ... [ ok ]
* Unloading ALSA modules ... [ ok ]
* Loading ALSA modules ...
* Loading: snd-card-0 ...
WARNING: Error inserting snd_page_alloc (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/snd-page-alloc.ko): Invalid module format
WARNING: Error inserting snd (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/snd.ko): Invalid module format
WARNING: Error inserting snd_timer (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_pcm (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_ac97_bus (/lib/modules/2.6.16-gentoo-r7/alsa-driver/pci/ac97/snd-ac97-bus.ko): Invalid module format
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.16-gentoo-r7/alsa-driver/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_intel8x0 (/lib/modules/2.6.16-gentoo-r7/alsa-driver/pci/snd-intel8x0.ko): Unknown symbol in module, or unknown parameter (see dmesg) [ !! ]
* Loading: snd-seq-oss ...
WARNING: Error inserting snd (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/snd.ko): Invalid module format
WARNING: Error inserting snd_seq_device (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_seq (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/seq/snd-seq.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_seq_oss (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/seq/oss/snd-seq-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg) [ !! ]
* Loading: snd-pcm-oss ...
WARNING: Error inserting snd (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/snd.ko): Invalid module format
WARNING: Error inserting snd_mixer_oss (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/oss/snd-mixer-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_page_alloc (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/snd-page-alloc.ko): Invalid module format
WARNING: Error inserting snd_timer (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_pcm (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_pcm_oss (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/oss/snd-pcm-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg) [ !! ]
* Loading: snd-mixer-oss ...
WARNING: Error inserting snd (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/snd.ko): Invalid module format
FATAL: Error inserting snd_mixer_oss (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/oss/snd-mixer-oss.ko): Unknown symbol in module, or unknown parameter (see dmesg) [ !! ]
* Loading: snd-seq ...
WARNING: Error inserting snd (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/snd.ko): Invalid module format
WARNING: Error inserting snd_seq_device (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_seq (/lib/modules/2.6.16-gentoo-r7/alsa-driver/acore/seq/snd-seq.ko): Unknown symbol in module, or unknown parameter (see dmesg) [ ok ]
* Restoring Mixer Levels ... [ ok ]
|
Estoy buscando información en multitud de lugares y me siento francamente perdido, por ello he preferido postear para ver si algún alma caritativa me puede echar un cable.
Muchas gracias de antemano.
Palmax
PD: Otra información:
| Quote: | # cat /proc/asound/cards
0 [ICH5 ]: ICH4 - Intel ICH5
Intel ICH5 with ALC202 at 0xe8000c00, irq 185
1 [Modem ]: ICH-MODEM - Intel ICH5 Modem
Intel ICH5 Modem at 0x1800, irq 185
|
| Quote: | # cat /proc/interrupts
CPU0 CPU1
0: 247290 0 IO-APIC-edge timer
1: 6247 0 IO-APIC-edge i8042
9: 1070 0 IO-APIC-level acpi
12: 11760 0 IO-APIC-edge i8042
14: 14218 0 IO-APIC-edge ide0
15: 16496 0 IO-APIC-edge ide1
177: 25076 0 IO-APIC-level uhci_hcd:usb2, uhci_hcd:usb5
185: 100000 0 IO-APIC-level Intel ICH5, Intel ICH5 Modem
193: 12308 0 IO-APIC-level eth0
201: 0 0 IO-APIC-level uhci_hcd:usb4
209: 3 0 IO-APIC-level ohci1394
217: 3 0 IO-APIC-level ehci_hcd:usb1, fglrx
225: 0 0 IO-APIC-level uhci_hcd:usb3
NMI: 0 0
LOC: 247230 247229
ERR: 0
MIS: 0
|
| Quote: | # cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC).
|
| Quote: | # cat .config | grep SOUND
CONFIG_SOUND=y
# CONFIG_SOUND_PRIME is not set
|
| Quote: | # cat .config | grep SND
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
|
Por cierto, también miré si hubiera un bug en portage y no encontré "el mío"
https://bugs.gentoo.org/buglist.cgi?query_format=&short_desc_type=allwords&short_desc=ati-drivers&bug_status=UNCONFIRMED&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED
Aki dejo mi emerge --info
| Quote: | # emerge --info
Portage 2.0.54-r2 (default-linux/x86/2005.1, gcc-3.4.5, glibc-2.3.6-r3, 2.6.16-gentoo-r7 i686)
=================================================================
System uname: 2.6.16-gentoo-r7 i686 Intel(R) Pentium(R) 4 CPU 3.40GHz
Gentoo Base System version 1.6.14
ccache version 2.3 [enabled]
dev-lang/python: 2.3.5-r2, 2.4.2
dev-python/pycrypto: [Not Present]
dev-util/ccache: 2.3
dev-util/confcache: [Not Present]
sys-apps/sandbox: 1.2.17
sys-devel/autoconf: 2.13, 2.59-r7
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1
sys-devel/binutils: 2.16.1
sys-devel/libtool: 1.5.22
virtual/os-headers: 2.6.11-r2
ACCEPT_KEYWORDS="x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-march=pentium4 -O2 -pipe -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3.4/env /usr/kde/3.4/share/config /usr/kde/3.4/shutdown /usr/kde/3/share/config /usr/lib/X11/xkb /usr/lib/mozilla/defaults/pref /usr/share/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/texmf/xdvi/ /var/qmail/control"
CONFIG_PROTECT_MASK="/etc/eselect/compiler /etc/gconf /etc/splash /etc/terminfo /etc/env.d"
CXXFLAGS="-march=pentium4 -O2 -pipe -fomit-frame-pointer"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig ccache distlocks sandbox sfperms strict"
GENTOO_MIRRORS="http://mirror.ovh.net/gentoo-distfiles/ ftp://mirror.ovh.net/gentoo-distfiles/ http://gentoo.modulix.net/gentoo/ http://ftp.club-internet.fr/pub/mirrors/gentoo ftp://ftp.tu-clausthal.de/pub/linux/gentoo/ ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/gentoo http://linux.rz.ruhr-uni-bochum.de/download/gentoo-mirror/ ftp://linux.rz.ruhr-uni-bochum.de/gentoo-mirror/ http://ftp.uni-erlangen.de/pub/mirrors/gentoo ftp://ftp.uni-erlangen.de/pub/mirrors/gentoo ftp://ftp.join.uni-muenster.de/pub/linux/distributions/gentoo ftp://ftp.wh2.tu-dresden.de/pub/mirrors/gentoo http://mirrors.sec.informatik.tu-darmstadt.de/gentoo/ http://ftp-stud.fht-esslingen.de/pub/Mirrors/gentoo/ ftp://ftp-stud.fht-esslingen.de/pub/Mirrors/gentoo/ ftp://ftp.gentoo.mesh-solutions.com/gentoo/ http://pandemonium.tiscali.de/pub/gentoo/ ftp://pandemonium.tiscali.de/pub/gentoo/ ftp://ftp.rz.tu-bs.de/pub/mirror/ftp.gentoo.org/gentoo-distfiles/ http://gentoo.intergenia.de http://ftp.caliu.info/pub/gentoo/ ftp://ftp.caliu.info/pub/gentoo/ http://linuv.uv.es/mirror/gentoo/"
LANG="es_ES.UTF-8"
LC_ALL="es_ES.UTF-8"
LINGUAS="es"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
USE="x86 16bit 7zip X a52 aac aalib acpi ada adns alsa amarok apache2 apm aqua_theme arts asf asm async auctex audiofile avi bash-completion berkdb bitmap-fonts bl bzip2 c++ carbone_theme cardbus ccache cdda cddb cdio cdparanoia cdr cdrom clamav clamd cle266 cli corba cpdflib cpulimit cracklib crypt css ctype cups curl daap dba dbus dga dhcp directfb doc dri dts dvb dvd dvdr dvdread editor edl eds emacs emacs-w3 emboss encode esd ethereal exif expat ext-png fam fat fbcon fbdev ffmpeg fftw flac foomaticdb fortran fpx freetype ftp gcj gd gdbm gif gimp gimpprint glut glx gmp gnome gpm gsl gstreamer gtk gtk2 gtkhtml gzip h323 hal haskell hdf idn ieee1394 image imagemagick imap imlib ipv6 irssi isdnlog ithreads jack java jikes jp2 jpeg jpeg2k junit kde kdeenablefinal kerberos lame lcms libcaca libg++ libwww lm_sensors lua mad mhash mikmod mime mixer mjpeg mmx mmxext mng mono motif mouse mozcalendar mozilla mozsvg mp3 mpeg mpeg2 mpeg4 mplayer mpm-worker mppe-mppc msn mysql ncurses nhc98 nls nptl nsplugin ntfs octave ogg oggvorbis openal opengl openssh openssl oss pam pcntl pcre pdflib perl php pic plotutils png posix ppds pppd python qt quicktime rar readline reflection reiser4 reiserfs sdl session sftp skins slang smp sndfile sockets socks5 speech speex spell spl sql sqlite sse sse-filters sse2 ssl subversion svg svga syslog tcltk tcpd tetex theora threads tiff truetype truetype-fonts type1-fonts ucs2 ucs4 udev unicode usb userlocales utf8 v4l v4l2 vcd vcdimager visualization vorbis wifi win32codecs wma wma123 wxwindows x264 xchat xemacs xine xml xml2 xmms xorg xpm xv xvid yv12 zip zlib linguas_es userland_GNU kernel_linux elibc_glibc"
Unset: ASFLAGS, CTARGET, INSTALL_MASK, LDFLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTAGE_RSYNC_OPTS, PORTDIR_OVERLAY
|
Last edited by Palmax Maverick on Mon May 22, 2006 10:29 pm; edited 1 time in total |
|
| Back to top |
|
 |
Palmax Maverick
Guru
Joined: 14 Oct 2004
Posts: 339
|
| Posted: Mon May 22, 2006 10:28 pm Post subject: Solución: irqpoll + TLS off |
|
|
Buenas:
Ahora parece que si desactivo los fast TLS y pongo irqpoll parece que funciona. Ya puedo oir heavy!!
Un saludo
Palmax
PD: Mirror mirror |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Spanish
