| View previous topic :: View next topic |
| Author |
Message |
pava_rulez
Guru
Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe
|
 Posted: Mon Apr 11, 2005 9:16 pm Post subject: Eth0 non vista |
 |
|
Scusate ho troppo sonno per pensare e vorrei risolvere in fretta. Ho installato Gentoo 2005 e va tutto bene a parte 1 particolare da niente: non mi riconosce la rete. Dal cd live tutto bene, dal nuovo ambiente no. Se do ifconfig ho solo l'interfaccia di loopback, ho messo in /etc/conf.d/net e l'ho aggiunto al runlevel di default. Preciso che ho l'adsl di fatsweb con ip dinamico e su gentoo 2004.3 andava benissimo (ho fatto l'installazione del 2005 ex novo).
Mi sapete aiutare x favore? |
|
| Back to top |
|
 |
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31460
Location: here
|
| Posted: Mon Apr 11, 2005 9:21 pm Post subject: |
|
|
Allora non e'
ma
Inoltre il modulo e' caricato della scheda?
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
pava_rulez
Guru
Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe
|
| Posted: Mon Apr 11, 2005 9:25 pm Post subject: |
|
|
| fedeliallalinea wrote: | Allora non e'
ma
Inoltre il modulo e' caricato della scheda? |
Scusa hai ragione sulla prima è che sono su winzozz e andavo a memoria. Per quanto riguarda il modulo della scheda temo in effetti di no. Ma nella prima installazione non mi sembra di aver dovuto indicare niente. Cosa dovrei fare? |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31460
Location: here
|
| Posted: Mon Apr 11, 2005 9:27 pm Post subject: |
|
|
Hai messo htplug/coldplug?
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
pava_rulez
Guru
Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe
|
| Posted: Mon Apr 11, 2005 9:30 pm Post subject: |
|
|
| fedeliallalinea wrote: | | Hai messo htplug/coldplug? |
Tutti e 2 |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31460
Location: here
|
| Posted: Mon Apr 11, 2005 9:36 pm Post subject: |
|
|
Metti coldplug e htplug sara' una sua dipendenza poi aggiungi al runlevel di boot coldplug
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
pava_rulez
Guru
Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe
|
| Posted: Mon Apr 11, 2005 9:42 pm Post subject: |
|
|
| fedeliallalinea wrote: | | Metti coldplug e htplug sara' una sua dipendenza poi aggiungi al runlevel di boot coldplug |
Già fatto |
|
| Back to top |
|
|
Little Cash
Tux's lil' helper
Joined: 04 Dec 2003
Posts: 131
Location: Cosenza, Italia
|
| Posted: Tue Apr 12, 2005 1:18 am Post subject: |
|
|
Il kernel del livecd e' compilato in modo tale da avere i moduli di pressoche' ogni periferica abilitati. Dai un'occhiata alla configurazione del tuo kernel, con buona probabilita' il modulo relativo alla tua scheda non e' stato compilato. Compilalo come built-in o come modulo (in questo caso mettilo in automatico all'avvio). Hotplug rileva la periferica, ma se il kernel non e' compilato adeguatamente e' come se gli dai a leggere un libro in una lingua che lui non sa leggere..
Fammi sapere,
Saluti
_________________
D: Perche' usi linux?
R: Perche' mi piace dover riavviare solo per un kernel upgrade
- badguy@IRCNet - |
|
| Back to top |
|
|
pava_rulez
Guru
Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe
|
| Posted: Tue Apr 12, 2005 6:30 am Post subject: |
|
|
| Little Cash wrote: | Il kernel del livecd e' compilato in modo tale da avere i moduli di pressoche' ogni periferica abilitati. Dai un'occhiata alla configurazione del tuo kernel, con buona probabilita' il modulo relativo alla tua scheda non e' stato compilato. Compilalo come built-in o come modulo (in questo caso mettilo in automatico all'avvio). Hotplug rileva la periferica, ma se il kernel non e' compilato adeguatamente e' come se gli dai a leggere un libro in una lingua che lui non sa leggere..
|
Riporto 1 paio di comandi e di file:
| Code: | lsmod
Module Size Used by
vfat 10752 1
fat 34588 1 vfat
e1000 81332 0
via_rhine 18692 0
mii 3968 1 via_rhine
snd_ens1371 18912 0
snd_rawmidi 18848 1 snd_ens1371
snd_seq_device 6796 1 snd_rawmidi
snd_ac97_codec 68216 1 snd_ens1371
snd_pcm 76040 2 snd_ens1371,snd_ac97_codec
snd_timer 19460 1 snd_pcm
snd 44388 6 snd_ens1371,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 7428 1 snd_pcm
gameport 3712 1 snd_ens1371
parport_pc 29508 0
parport 30664 1 parport_pc
via_agp 7424 1
agpgart 27688 1 via_agp
sata_via 5764 0
sata_svw 5252 0
sata_sil 6020 0
sata_promise 7940 0
libata 39556 4 sata_via,sata_svw,sata_sil,sata_promise
dm_mod 49852 0
sbp2 21128 0
ohci1394 29700 0
ieee1394 88884 2 sbp2,ohci1394
ohci_hcd 18440 0
uhci_hcd 28304 0
usb_storage 28032 1
usbhid 30272 0
ehci_hcd 27656 0
usbcore 99192 6 ohci_hcd,uhci_hcd,usb_storage,usbhid,ehci_hcd
|
| Code: | lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 02)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
0000:00:09.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
0000:00:0b.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 85)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1)
|
file etc/conf.d/net
| Code: | # /etc/conf.d/net:
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/conf.d/net,v 1.7 2002/11/18 19:39:22 azarah Exp $
# Global config file for net.* rc-scripts
# This is basically the ifconfig argument without the ifconfig $iface
#
#iface_eth0="192.168.0.2 broadcast 192.168.0.255 netmask 255.255.255.0"
#iface_eth1="207.170.82.202 broadcast 207.0.255.255 netmask 255.255.0.0"
# For DHCP set iface_eth? to "dhcp"
# For passing options to dhcpcd use dhcpcd_eth?
#
iface_eth0="dhcp"
dhcpcd_eth0="-HD"
# For adding aliases to a interface
#
#alias_eth0="192.168.0.3 192.168.0.4"
# NB: The next is only used for aliases.
#
# To add a custom netmask/broadcast address to created aliases,
# uncomment and change accordingly. Leave commented to assign
# defaults for that interface.
#
#broadcast_eth0="192.168.0.255 192.168.0.255"
#netmask_eth0="255.255.255.0 255.255.255.0"
# For setting the default gateway
#
#gateway="eth0/192.168.0.1"
|
|
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31460
Location: here
|
| Posted: Tue Apr 12, 2005 6:32 am Post subject: |
|
|
Hai installato il programma dhcpcd?
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
pava_rulez
Guru
Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe
|
| Posted: Tue Apr 12, 2005 8:40 am Post subject: |
|
|
| fedeliallalinea wrote: | | Hai installato il programma dhcpcd? |
Si e se do dhcpcd eth0 mi viene assegnato 1 inidirzzo Ip e riesco a pingare tranquillamente. Però al reboot l'impostazione sparisce e la volta dopo devo ridare il comando. C'è la possibilità di fare eseguire il comandoall'avvio? |
|
| Back to top |
|
|
Fuzzo
Guru
Joined: 23 Jun 2004
Posts: 319
Location: Padova, Italy
|
| Posted: Tue Apr 12, 2005 9:15 am Post subject: |
|
|
| Code: | | # rc-update add net.eth0 default |
_________________
bye,
Fuzzo |
|
| Back to top |
|
|
pava_rulez
Guru
Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe
|
| Posted: Tue Apr 12, 2005 9:16 am Post subject: |
|
|
| Fuzzo wrote: | | Code: | | # rc-update add net.eth0 default |
|
Già fatto anche quello, ma non funzia omunque... |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31460
Location: here
|
| Posted: Tue Apr 12, 2005 10:27 am Post subject: |
|
|
Prova a commentare la riga
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
pava_rulez
Guru
Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe
|
| Posted: Tue Apr 12, 2005 12:01 pm Post subject: |
|
|
| fedeliallalinea wrote: | Prova a commentare la riga
|
Neanche questo serve... |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31460
Location: here
|
| Posted: Tue Apr 12, 2005 12:07 pm Post subject: |
|
|
Posta un rc-status
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
pava_rulez
Guru
Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe
|
| Posted: Tue Apr 12, 2005 12:19 pm Post subject: |
|
|
| fedeliallalinea wrote: | | Posta un rc-status |
| Code: | rc-update
Runlevel:
local started
netmount started
hotplug started
syslog-ng started
net.eth0 started
|
|
|
| Back to top |
|
|
CarloJekko
Veteran
Joined: 31 Mar 2005
Posts: 1315
Location: Baia Domizia :-)
|
| Posted: Tue Apr 12, 2005 1:13 pm Post subject: |
|
|
posta un
tail -n 500 /var/log/messages
(da root) forse si nota qualcosa...
_________________
C. |
|
| Back to top |
|
|
pava_rulez
Guru
Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe
|
| Posted: Wed Apr 13, 2005 9:47 am Post subject: |
|
|
| CarloJekko wrote: | posta un
tail -n 500 /var/log/messages
(da root) forse si nota qualcosa... |
| Code: | Apr 13 11:40:55 Gentoo Casa syslog-ng[7820]: syslog-ng version 1.6.5 starting
Apr 13 11:40:55 Gentoo Casa syslog-ng[7820]: Changing permissions on special file /dev/tty12
Apr 13 11:40:55 Gentoo Casa Linux version 2.6.11-gentoo-r3 (root@livecd) (gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #1 Mon Apr 11 19:17:21 GMT 2005
Apr 13 11:40:55 Gentoo Casa BIOS-provided physical RAM map:
Apr 13 11:40:55 Gentoo Casa BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Apr 13 11:40:55 Gentoo Casa BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Apr 13 11:40:55 Gentoo Casa BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Apr 13 11:40:55 Gentoo Casa BIOS-e820: 0000000000100000 - 0000000018000000 (usable)
Apr 13 11:40:55 Gentoo Casa BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Apr 13 11:40:55 Gentoo Casa 384MB LOWMEM available.
Apr 13 11:40:55 Gentoo Casa On node 0 totalpages: 98304
Apr 13 11:40:55 Gentoo Casa DMA zone: 4096 pages, LIFO batch:1
Apr 13 11:40:55 Gentoo Casa Normal zone: 94208 pages, LIFO batch:16
Apr 13 11:40:55 Gentoo Casa HighMem zone: 0 pages, LIFO batch:1
Apr 13 11:40:55 Gentoo Casa DMI 2.2 present.
Apr 13 11:40:55 Gentoo Casa ACPI: Unable to locate RSDP
Apr 13 11:40:55 Gentoo Casa Allocating PCI resources starting at 18000000 (gap: 18000000:e7ff0000)
Apr 13 11:40:55 Gentoo Casa Built 1 zonelists
Apr 13 11:40:55 Gentoo Casa Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda7 vga=0x317 splash=verbose
Apr 13 11:40:55 Gentoo Casa Local APIC disabled by BIOS -- you can enable it with "lapic"
Apr 13 11:40:55 Gentoo Casa mapped APIC to ffffd000 (01302000)
Apr 13 11:40:55 Gentoo Casa Initializing CPU#0
Apr 13 11:40:55 Gentoo Casa PID hash table entries: 2048 (order: 11, 32768 bytes)
Apr 13 11:40:55 Gentoo Casa Detected 900.328 MHz processor.
Apr 13 11:40:55 Gentoo Casa Using tsc for high-res timesource
Apr 13 11:40:55 Gentoo Casa Speakup v-2.00 CVS: Wed Mar 2 20:22:02 EST 2005 : initialized
Apr 13 11:40:55 Gentoo Casa Speakup: loading module "speakup_n"
Apr 13 11:40:55 Gentoo Casa request_module: runaway loop modprobe speakup_n
Apr 13 11:40:55 Gentoo Casa Console: colour VGA+ 80x25
Apr 13 11:40:55 Gentoo Casa Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Apr 13 11:40:55 Gentoo Casa Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Apr 13 11:40:55 Gentoo Casa Memory: 383260k/393216k available (2841k kernel code, 9388k reserved, 1022k data, 192k init, 0k highmem)
Apr 13 11:40:55 Gentoo Casa Checking if this processor honours the WP bit even in supervisor mode... Ok.
Apr 13 11:40:55 Gentoo Casa Calibrating delay loop... 1769.47 BogoMIPS (lpj=884736)
Apr 13 11:40:55 Gentoo Casa Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Apr 13 11:40:55 Gentoo Casa Couldn't initialize miscdevice /dev/synth.
Apr 13 11:40:55 Gentoo Casa CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
Apr 13 11:40:55 Gentoo Casa CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
Apr 13 11:40:55 Gentoo Casa CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Apr 13 11:40:55 Gentoo Casa CPU: L2 Cache: 256K (64 bytes/line)
Apr 13 11:40:55 Gentoo Casa CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000
Apr 13 11:40:55 Gentoo Casa Intel machine check architecture supported.
Apr 13 11:40:55 Gentoo Casa Intel machine check reporting enabled on CPU#0.
Apr 13 11:40:55 Gentoo Casa CPU: AMD Athlon(tm) Processor stepping 02
Apr 13 11:40:55 Gentoo Casa Enabling fast FPU save and restore... done.
Apr 13 11:40:55 Gentoo Casa Checking 'hlt' instruction... OK.
Apr 13 11:40:55 Gentoo Casa checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Apr 13 11:40:55 Gentoo Casa Freeing initrd memory: 1582k freed
Apr 13 11:40:55 Gentoo Casa NET: Registered protocol family 16
Apr 13 11:40:55 Gentoo Casa PCI: PCI BIOS revision 2.10 entry at 0xfb3d0, last bus=1
Apr 13 11:40:55 Gentoo Casa PCI: Using configuration type 1
Apr 13 11:40:55 Gentoo Casa mtrr: v2.0 (20020519)
Apr 13 11:40:55 Gentoo Casa ACPI: Subsystem revision 20050211
Apr 13 11:40:55 Gentoo Casa ACPI: Interpreter disabled.
Apr 13 11:40:55 Gentoo Casa Linux Plug and Play Support v0.97 (c) Adam Belay
Apr 13 11:40:55 Gentoo Casa pnp: PnP ACPI: disabled
Apr 13 11:40:55 Gentoo Casa SCSI subsystem initialized
Apr 13 11:40:55 Gentoo Casa PCI: Probing PCI hardware
Apr 13 11:40:55 Gentoo Casa PCI: Probing PCI hardware (bus 00)
Apr 13 11:40:55 Gentoo Casa PCI: Via IRQ fixup
Apr 13 11:40:55 Gentoo Casa Disabling VIA memory write queue (PCI ID 0305, rev 02): [55] 89 & 1f -> 09
Apr 13 11:40:55 Gentoo Casa PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
Apr 13 11:40:55 Gentoo Casa Machine check exception polling timer started.
Apr 13 11:40:55 Gentoo Casa apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Apr 13 11:40:55 Gentoo Casa inotify device minor=63
Apr 13 11:40:55 Gentoo Casa devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Apr 13 11:40:55 Gentoo Casa devfs: boot_options: 0x0
Apr 13 11:40:55 Gentoo Casa Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Apr 13 11:40:55 Gentoo Casa SGI XFS with large block numbers, no debug enabled
Apr 13 11:40:55 Gentoo Casa Initializing Cryptographic API
Apr 13 11:40:55 Gentoo Casa Applying VIA southbridge workaround.
Apr 13 11:40:55 Gentoo Casa Real Time Clock Driver v1.12
Apr 13 11:40:55 Gentoo Casa Non-volatile memory driver v1.2
Apr 13 11:40:55 Gentoo Casa vesafb: NVidia Corporation, NV10 Reference Board, Chip Rev A1 (OEM: NVidia)
Apr 13 11:40:55 Gentoo Casa vesafb: VBE version: 3.0
Apr 13 11:40:55 Gentoo Casa vesafb: protected mode interface info at c000:0eb9
Apr 13 11:40:55 Gentoo Casa vesafb: pmi: set display start = c00c0ef2, set palette = c00c0f68
Apr 13 11:40:55 Gentoo Casa vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
Apr 13 11:40:55 Gentoo Casa vesafb: hardware supports DCC2 transfers
Apr 13 11:40:55 Gentoo Casa vesafb: monitor limits: vf = 150 Hz, hf = 70 kHz, clk = 110 MHz
Apr 13 11:40:55 Gentoo Casa vesafb: scrolling: redraw
Apr 13 11:40:55 Gentoo Casa Console: switching to colour frame buffer device 80x30
Apr 13 11:40:55 Gentoo Casa vesafb: framebuffer at 0xd0000000, mapped to 0xd8880000, using 600k, total 32768k
Apr 13 11:40:55 Gentoo Casa fb0: VESA VGA frame buffer device
Apr 13 11:40:55 Gentoo Casa serio: i8042 AUX port at 0x60,0x64 irq 12
Apr 13 11:40:55 Gentoo Casa serio: i8042 KBD port at 0x60,0x64 irq 1
Apr 13 11:40:55 Gentoo Casa Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Apr 13 11:40:55 Gentoo Casa ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr 13 11:40:55 Gentoo Casa ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Apr 13 11:40:55 Gentoo Casa mice: PS/2 mouse device common for all mice
Apr 13 11:40:55 Gentoo Casa input: AT Translated Set 2 keyboard on isa0060/serio0
Apr 13 11:40:55 Gentoo Casa input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
Apr 13 11:40:55 Gentoo Casa io scheduler noop registered
Apr 13 11:40:55 Gentoo Casa io scheduler anticipatory registered
Apr 13 11:40:55 Gentoo Casa io scheduler deadline registered
Apr 13 11:40:55 Gentoo Casa io scheduler cfq registered
Apr 13 11:40:55 Gentoo Casa FDC 0 is a post-1991 82077
Apr 13 11:40:55 Gentoo Casa RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Apr 13 11:40:55 Gentoo Casa loop: loaded (max 8 devices)
Apr 13 11:40:55 Gentoo Casa Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Apr 13 11:40:55 Gentoo Casa ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Apr 13 11:40:55 Gentoo Casa VP_IDE: IDE controller at PCI slot 0000:00:07.1
Apr 13 11:40:55 Gentoo Casa VP_IDE: chipset revision 6
Apr 13 11:40:55 Gentoo Casa VP_IDE: not 100% native mode: will probe irqs later
Apr 13 11:40:55 Gentoo Casa VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
Apr 13 11:40:55 Gentoo Casa ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
Apr 13 11:40:55 Gentoo Casa ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
Apr 13 11:40:55 Gentoo Casa Probing IDE interface ide0...
Apr 13 11:40:55 Gentoo Casa hda: WDC WD200BB-00AUA1, ATA DISK drive
Apr 13 11:40:55 Gentoo Casa ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 13 11:40:55 Gentoo Casa Probing IDE interface ide1...
Apr 13 11:40:55 Gentoo Casa hdc: PIONEER DVD-RW DVR-107D, ATAPI CD/DVD-ROM drive
Apr 13 11:40:55 Gentoo Casa hdd: SAMSUNG CD-ROM SC-152C, ATAPI CD/DVD-ROM drive
Apr 13 11:40:55 Gentoo Casa ide1 at 0x170-0x177,0x376 on irq 15
Apr 13 11:40:55 Gentoo Casa Probing IDE interface ide2...
Apr 13 11:40:55 Gentoo Casa Probing IDE interface ide3...
Apr 13 11:40:55 Gentoo Casa Probing IDE interface ide4...
Apr 13 11:40:55 Gentoo Casa Probing IDE interface ide5...
Apr 13 11:40:55 Gentoo Casa hda: max request size: 128KiB
Apr 13 11:40:55 Gentoo Casa hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
Apr 13 11:40:55 Gentoo Casa hda: cache flushes not supported
Apr 13 11:40:55 Gentoo Casa /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
Apr 13 11:40:55 Gentoo Casa hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
Apr 13 11:40:55 Gentoo Casa Uniform CD-ROM driver Revision: 3.20
Apr 13 11:40:55 Gentoo Casa hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Apr 13 11:40:55 Gentoo Casa st: Version 20041025, fixed bufsize 32768, s/g segs 256
Apr 13 11:40:55 Gentoo Casa NET: Registered protocol family 2
Apr 13 11:40:55 Gentoo Casa IP: routing cache hash table of 4096 buckets, 32Kbytes
Apr 13 11:40:55 Gentoo Casa TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Apr 13 11:40:55 Gentoo Casa TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Apr 13 11:40:55 Gentoo Casa TCP: Hash tables configured (established 16384 bind 16384)
Apr 13 11:40:55 Gentoo Casa NET: Registered protocol family 1
Apr 13 11:40:55 Gentoo Casa NET: Registered protocol family 17
Apr 13 11:40:55 Gentoo Casa powernow-k8: Processor cpuid 642 not supported
Apr 13 11:40:55 Gentoo Casa RAMDISK: Compressed image found at block 0
Apr 13 11:40:55 Gentoo Casa VFS: Mounted root (ext2 filesystem) readonly.
Apr 13 11:40:55 Gentoo Casa Freeing unused kernel memory: 192k freed
Apr 13 11:40:55 Gentoo Casa usbcore: registered new driver usbfs
Apr 13 11:40:55 Gentoo Casa usbcore: registered new driver hub
Apr 13 11:40:55 Gentoo Casa usbcore: registered new driver hiddev
Apr 13 11:40:55 Gentoo Casa usbcore: registered new driver usbhid
Apr 13 11:40:55 Gentoo Casa drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Apr 13 11:40:55 Gentoo Casa Initializing USB Mass Storage driver...
Apr 13 11:40:55 Gentoo Casa usbcore: registered new driver usb-storage
Apr 13 11:40:55 Gentoo Casa USB Mass Storage support registered.
Apr 13 11:40:55 Gentoo Casa USB Universal Host Controller Interface driver v2.2
Apr 13 11:40:55 Gentoo Casa PCI: Found IRQ 11 for device 0000:00:07.2
Apr 13 11:40:55 Gentoo Casa PCI: Sharing IRQ 11 with 0000:00:07.3
Apr 13 11:40:55 Gentoo Casa PCI: Sharing IRQ 11 with 0000:00:0b.0
Apr 13 11:40:55 Gentoo Casa uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Apr 13 11:40:55 Gentoo Casa uhci_hcd 0000:00:07.2: irq 11, io base 0xd400
Apr 13 11:40:55 Gentoo Casa uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Apr 13 11:40:55 Gentoo Casa hub 1-0:1.0: USB hub found
Apr 13 11:40:55 Gentoo Casa hub 1-0:1.0: 2 ports detected
Apr 13 11:40:55 Gentoo Casa PCI: Found IRQ 11 for device 0000:00:07.3
Apr 13 11:40:55 Gentoo Casa PCI: Sharing IRQ 11 with 0000:00:07.2
Apr 13 11:40:55 Gentoo Casa PCI: Sharing IRQ 11 with 0000:00:0b.0
Apr 13 11:40:55 Gentoo Casa uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
Apr 13 11:40:55 Gentoo Casa uhci_hcd 0000:00:07.3: irq 11, io base 0xd800
Apr 13 11:40:55 Gentoo Casa uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
Apr 13 11:40:55 Gentoo Casa hub 2-0:1.0: USB hub found
Apr 13 11:40:55 Gentoo Casa hub 2-0:1.0: 2 ports detected
Apr 13 11:40:55 Gentoo Casa ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Apr 13 11:40:55 Gentoo Casa usb 1-1: new full speed USB device using uhci_hcd and address 2
Apr 13 11:40:55 Gentoo Casa sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
Apr 13 11:40:55 Gentoo Casa device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Apr 13 11:40:55 Gentoo Casa usb 1-2: new full speed USB device using uhci_hcd and address 3
Apr 13 11:40:55 Gentoo Casa libata version 1.10 loaded.
Apr 13 11:40:55 Gentoo Casa scsi0 : SCSI emulation for USB Mass Storage devices
Apr 13 11:40:55 Gentoo Casa usb-storage: device found at 3
Apr 13 11:40:55 Gentoo Casa usb-storage: waiting for device to settle before scanning
Apr 13 11:40:55 Gentoo Casa ReiserFS: hda7: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda7
Apr 13 11:40:55 Gentoo Casa kjournald starting. Commit interval 5 seconds
Apr 13 11:40:55 Gentoo Casa EXT3 FS on hda7, internal journal
Apr 13 11:40:55 Gentoo Casa EXT3-fs: mounted filesystem with ordered data mode.
Apr 13 11:40:55 Gentoo Casa Adding 771080k swap on /dev/hda6. Priority:-1 extents:1
Apr 13 11:40:55 Gentoo Casa EXT3 FS on hda7, internal journal
Apr 13 11:40:55 Gentoo Casa Vendor: WDC Model: WD800BB-00FRA0 Rev: 77.0
Apr 13 11:40:55 Gentoo Casa Type: Direct-Access ANSI SCSI revision: 02
Apr 13 11:40:55 Gentoo Casa SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
Apr 13 11:40:55 Gentoo Casa sda: assuming drive cache: write through
Apr 13 11:40:55 Gentoo Casa SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
Apr 13 11:40:55 Gentoo Casa sda: assuming drive cache: write through
Apr 13 11:40:55 Gentoo Casa /dev/scsi/host0/bus0/target0/lun0: p1
Apr 13 11:40:55 Gentoo Casa Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Apr 13 11:40:55 Gentoo Casa Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Apr 13 11:40:55 Gentoo Casa usb-storage: device scan complete
Apr 13 11:40:55 Gentoo Casa e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
Apr 13 11:40:55 Gentoo Casa e100: Copyright(c) 1999-2004 Intel Corporation
Apr 13 11:40:55 Gentoo Casa Linux agpgart interface v0.100 (c) Dave Jones
Apr 13 11:40:55 Gentoo Casa agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
Apr 13 11:40:55 Gentoo Casa agpgart: Maximum main memory to use for agp memory: 322M
Apr 13 11:40:55 Gentoo Casa agpgart: AGP aperture is 64M @ 0xd8000000
Apr 13 11:40:55 Gentoo Casa parport_pc: VIA 686A/8231 detected
Apr 13 11:40:55 Gentoo Casa parport_pc: probing current configuration
Apr 13 11:40:55 Gentoo Casa parport_pc: Current parallel port base: 0x378
Apr 13 11:40:55 Gentoo Casa parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
Apr 13 11:40:55 Gentoo Casa parport_pc: VIA parallel port: io=0x378, irq=7
Apr 13 11:40:55 Gentoo Casa PCI: Found IRQ 5 for device 0000:00:09.0
Apr 13 11:40:55 Gentoo Casa via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
Apr 13 11:40:55 Gentoo Casa PCI: Found IRQ 11 for device 0000:00:0b.0
Apr 13 11:40:55 Gentoo Casa PCI: Sharing IRQ 11 with 0000:00:07.2
Apr 13 11:40:55 Gentoo Casa PCI: Sharing IRQ 11 with 0000:00:07.3
Apr 13 11:40:55 Gentoo Casa eth0: VIA Rhine III at 0x1e000, 00:20:ed:6b:23:47, IRQ 11.
Apr 13 11:40:55 Gentoo Casa eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021.
Apr 13 11:40:55 Gentoo Casa eth0: link up, 10Mbps, half-duplex, lpa 0x0021
Apr 13 11:41:08 Gentoo Casa login(pam_unix)[7982]: session opened for user root by (uid=0)
|
|
|
| Back to top |
|
|
pava_rulez
Guru
Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe
|
| Posted: Wed Apr 13, 2005 1:23 pm Post subject: |
|
|
| posso uppeggiare? |
|
| Back to top |
|
|
xchris
Advocate
Joined: 10 Jul 2003
Posts: 2824
|
| Posted: Wed Apr 13, 2005 2:17 pm Post subject: |
|
|
scusa ma la eth.... si vede.
qual'e' il problema?
non si prende l'ip con dhcpcd?
prova a lanciare in manuale
se ti "esce" subito senza cambiare l'ip e' probabile un errore nel kernel (sezione Network)
ciao
_________________
while True:Gentoo() |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 31460
Location: here
|
| Posted: Wed Apr 13, 2005 3:24 pm Post subject: |
|
|
| xchris wrote: | | prova a lanciare in manuale |
Il problema e' proprio questo... se lancia il comando manualmente va non lo fa automaticamente al boot anche se ha net.eth0 al runlevel
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
pava_rulez
Guru
Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe
|
| Posted: Wed Apr 13, 2005 4:07 pm Post subject: |
|
|
| fedeliallalinea wrote: | | xchris wrote: | | prova a lanciare in manuale |
Il problema e' proprio questo... se lancia il comando manualmente va non lo fa automaticamente al boot anche se ha net.eth0 al runlevel |
esatto...è questo il problema (magari da poco), ma non vorrei dover dare ogni volta il comando |
|
| Back to top |
|
|
xchris
Advocate
Joined: 10 Jul 2003
Posts: 2824
|
| Posted: Wed Apr 13, 2005 4:18 pm Post subject: |
|
|
se fai /etc/init.d/net.eth0 start che fa?
ciao
_________________
while True:Gentoo() |
|
| Back to top |
|
|
pava_rulez
Guru
Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe
|
| Posted: Wed Apr 13, 2005 4:27 pm Post subject: |
|
|
| xchris wrote: | se fai /etc/init.d/net.eth0 start che fa?
ciao |
scusa sono su windows quindi te lo dico piu o meno:
| Code: | | "WARNING: net.eth0 has already been started" |
|
|
| Back to top |
|
|
|
Forum italiano (Italian)
