View previous topic :: View next topic |
Author |
Message |
redview Guru


Joined: 18 Feb 2004 Posts: 365 Location: Goteborg - Sweden
|
Posted: Sun Dec 05, 2004 9:48 pm Post subject: nokia 6630 and usb cable |
|
|
Hi!
I've got a nokia 6630 and i'd like to connect it with my laptop using a usb cable.
I think that the kernel can recongnize the usbmass storage inside the phone, but i dont how to mount it (ie, to which device i should mount my phone..).
here are some outputs:
dmesg:
Code: |
usb 1-2: new full speed USB device using address 10
usb 1-2: USB disconnect, address 10
usb 1-2: new full speed USB device using address 11
|
(that corresponds to a: plug-in, plug-out, plug-in)
cat /proc/bus/usb/devices
Code: |
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 8 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0421 ProdID=0410 Rev= 0.00
S: Manufacturer=Nokia
S: Product=Nokia 6630
S: SerialNumber=0123456789
C:* #Ifs=13 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=08 Prot=01 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=fe Prot=00 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
I: If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=08 Prot=00 Driver=(none)
I: If#= 4 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=0b Prot=00 Driver=(none)
I: If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=0b Prot=00 Driver=(none)
I: If#= 7 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
I: If#= 7 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=128ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#=10 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=af Prot=00 Driver=(none)
I: If#=11 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
I: If#=11 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=64ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
|
lspci
Code: |
0000:00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42)
0000:00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio Controller (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
0000:02:04.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
0000:02:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
0000:02:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)
0000:02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
0000:02:0e.0 USB Controller: NEC Corporation USB (rev 41)
0000:02:0e.1 USB Controller: NEC Corporation USB (rev 41)
0000:02:0e.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
|
any suggestion?
thanx! [/code] _________________ our enterprise a success as return is no option/our eyes were removed for our own safety/the distance too great for you to hear our cries/nevermind take this lamp we are beyond light [kinetic-arcturus]
you and I, connect and emerge [we ride-syl] |
|
Back to top |
|
 |
Hypersurf n00b

Joined: 11 Jan 2005 Posts: 8 Location: Leer, Ostfriesland, Germany
|
Posted: Thu Apr 21, 2005 7:55 pm Post subject: |
|
|
tried it too..
but: the phone is no mass storage :/
the phone communicates through OBEX and there is a modifies openobex-version somewhere on the net to use obex over the usb-cable.
didn't try it yet, i'm using bluetooth for file transfers.
edit:
http://members.dodo.com.au/~joaniemrc/nokia/Nokia-6670-USB.html
some problems, had to fix some code.. but now it works  |
|
Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|