| View previous topic :: View next topic |
| Author |
Message |
lcj
Tux's lil' helper
Joined: 25 Apr 2004
Posts: 82
Location: Opole, Poland
|
 Posted: Sat Apr 23, 2005 2:16 pm Post subject: Dell and OMSA (OpenManage Server Agent) - alternatives ? |
 |
|
I was wondering what're using as an alternative to OMSA ? I've started working on it yesterday, and so far I've found lm_sensors patch to get some info (sa you see it's not tailored well yet:
| Code: |
dellPE2600 lab $ sensors
bmc-i2c-1-00
Adapter: IPMI adapter
in1: +1.50 V (min = +1.56 V, max = +1.73 V)
in2: +0.00 V (min = +1.56 V, max = +1.73 V)
in3: +0.00 V (min = +1.56 V, max = +1.73 V)
in4: +0.62 V (min = +1.56 V, max = +1.73 V)
in5: +0.21 V (min = +4.79 V, max = +5.21 V)
in6: +5.08 V (min = +11.39 V, max = +12.61 V)
in7: +11.84 V (min = +3.16 V, max = +3.44 V)
in8: +3.35 V (min = +2.49 V, max = +3.28 V)
in9: +2.95 V (min = +2.42 V, max = +2.58 V)
in10: +2.53 V (min = +2.42 V, max = +2.58 V)
fan1: 2160 RPM (min = 1080 RPM)
fan2: 2280 RPM (min = 1080 RPM)
fan3: 2280 RPM (min = 1080 RPM)
fan4: 2280 RPM (min = 1080 RPM)
fan5: 2640 RPM (min = 1080 RPM)
fan6: 23520 RPM (min = 1080 RPM)
fan7: 2280 RPM (min = 1080 RPM)
temp1: +39.0°C (high = +80°C, hyst = -127°C)
temp2: +410.0°C (high = +80°C, hyst = -127°C)
temp3: -1280.0°C (high = +80°C, hyst = -127°C)
temp4: -800.0°C (high = +80°C, hyst = -127°C)
temp5: +430.0°C (high = +55°C, hyst = -127°C)
temp6: -1280.0°C (high = +40°C, hyst = -127°C)
temp7: -1280.0°C (high = +55°C, hyst = -127°C)
temp8: -800.0°C (high = +55°C, hyst = -127°C)
temp9: -1280.0°C (high = +55°C, hyst = -127°C)
temp10: -1280.0°C (high = +55°C, hyst = -127°C)
|
I've been running the command to check stability for 12h every minute and it seems it's doing fine...
Any other suggestions to get additional info from Dell server on Gentoo ?
_________________
--
Lukasz C. Jokiel via web |
|
| Back to top |
|
 |
Momo_CCCP
Tux's lil' helper
Joined: 26 Oct 2004
Posts: 141
|
| Posted: Sat Apr 23, 2005 2:25 pm Post subject: |
|
|
You may want to check hddtemp and smartmontools to monitor your hardrive(s).
_________________
Momo_CCCP |
|
| Back to top |
|
|
lcj
Tux's lil' helper
Joined: 25 Apr 2004
Posts: 82
Location: Opole, Poland
|
| Posted: Sat Apr 23, 2005 2:40 pm Post subject: |
|
|
Thanks, smartd gives me HDD temp.
| Code: |
dellPE2600 root # smartctl -a /dev/sda | grep Temp
Temperature Warning Enabled
Current Drive Temperature: 47 C
dellPE2600 root # smartctl -a /dev/sdb | grep Temp
Temperature Warning Enabled
Current Drive Temperature: 48 C
|
_________________
--
Lukasz C. Jokiel via web |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
