Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Kernel panic modprobing ohci into 2.6.1-mm4 preempt amd64
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on AMD64
View previous topic :: View next topic  
Author Message
ballyn
n00b
n00b


Joined: 14 Aug 2003
Posts: 73

PostPosted: Mon Jan 19, 2004 5:33 am    Post subject: Kernel panic modprobing ohci into 2.6.1-mm4 preempt amd64 Reply with quote

Heyas:

I've just gotten my Shuttle AN50R AMD64 3000 up and running... It seems to be pretty stable so far. I'm running the latest stage 3 from the amd64 livecd with 2.6.1-mm4 from a seagate 160 sata off the sii3112a.

One thing I did notice: I originally built a preemptible kernel, but when I tried to modprobe ohci_hcd, the kernel panicked at the "Connect" stage (as discovered via usb debugging). I had already loaded ehci, etc. When I rebuilt the kernel without preempt, the module installed fine and my usb mouse is recognized and functions in X.

I'm not sure where to really report the bug, but... Preempt is definitely doing bad things with my ohci stuff.

BTW, anyone got i2c running on an amd64 board? I can't even tell if this thing has sensors...
Back to top
View user's profile Send private message
jsc1959
n00b
n00b


Joined: 17 Sep 2003
Posts: 74
Location: Los Angeles, CA

PostPosted: Mon Jan 19, 2004 7:41 am    Post subject: Reply with quote

I had problems with pre-emptive also...disabled it and problems went away...just so you know preemptive has not been officially tested on amd64...there is a note ...i dont remember where, that said if you use it with amd64 you are on your own... :P ...anyway i2c does work on my msi k8t800...good luck.

Also you might want to try the gentoo-dev-sources kernel...it is the official kernel for amd64 on gentoo...
Back to top
View user's profile Send private message
ballyn
n00b
n00b


Joined: 14 Aug 2003
Posts: 73

PostPosted: Tue Jan 20, 2004 9:21 pm    Post subject: panic without preempt, too, if usb is autoloaded Reply with quote

So I added the usb stuff (ehci_hcd, ohci_hcd, hid) to modules.autoload.d... and I get a very similar oops "bad RIP value" right after the boot screen shows configuring module dependencies--so I'm assuming right as one of these drivers loads.

If I boot without the autload entries and then manually modprobe them in the same order, USB comes up fine, detects my hub, etc.

hmmmm...
Back to top
View user's profile Send private message
Sm1
Apprentice
Apprentice


Joined: 02 Dec 2003
Posts: 251
Location: Ames, IA

PostPosted: Tue May 24, 2005 3:15 pm    Post subject: Reply with quote

Well here enlies a problem for me. I need to use pre-emptible kernel if I want to use lirc with any decent speed per either the myth mailing list or lirc mailing list (don't remember which one I found this out). Before I dwelve down this path of unforseen consequences, does anyone else around here have any other experience with pre-empt on amd64?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on AMD64 All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum