Meeuw
Tux's lil' helper
Joined: 08 Nov 2002
Posts: 77
Location: NL - Oostzaan
|
 Posted: Tue May 24, 2005 6:27 pm Post subject: boot fails when fbsplash-gentoo-1280x1024 initrd is removed |
 |
|
hi all,
I've got a SATA harddisk which won't boot when I remove initrd /fbsplash-gentoo-1280x1024 from grub.conf.
contents of fbsplash initrd:
| Code: | drwxr-xr-x 8 root root 4096 mei 24 20:21 .
drwxr-xr-x 5 root root 4096 mei 24 20:21 ./dev
drwxr-xr-x 2 root root 4096 mei 24 20:21 ./dev/fb
drwxr-xr-x 2 root root 4096 mei 24 20:21 ./dev/misc
drwxr-xr-x 2 root root 4096 mei 24 20:21 ./dev/vc
crw-r--r-- 1 root root 1, 3 mei 24 20:21 ./dev/null
crw-r--r-- 1 root root 5, 1 mei 24 20:21 ./dev/console
drwxr-xr-x 3 root root 4096 mei 24 20:21 ./etc
drwxr-xr-x 3 root root 4096 mei 24 20:21 ./etc/splash
drwxr-xr-x 3 root root 4096 mei 24 20:21 ./etc/splash/gentoo
-rw-r--r-- 1 root root 897 mei 24 20:21 ./etc/splash/gentoo/1280x1024.cfg
drwxr-xr-x 2 root root 4096 mei 24 20:21 ./etc/splash/gentoo/images
-rw-r--r-- 1 root root 85695 mei 24 20:21 ./etc/splash/gentoo/images/verbose-1280x1024.jpg
-rw-r--r-- 1 root root 74963 mei 24 20:21 ./etc/splash/gentoo/images/silent-1280x1024.jpg
-rw-r--r-- 1 root root 565790 mei 24 20:21 ./etc/splash/gentoo/images/verbose-1280x1024-240.png
-rw-r--r-- 1 root root 340487 mei 24 20:21 ./etc/splash/gentoo/images/silent-1280x1024-256.png
drwxr-xr-x 2 root root 4096 mei 24 20:21 ./proc
drwxr-xr-x 2 root root 4096 mei 24 20:21 ./root
drwxr-xr-x 2 root root 4096 mei 24 20:21 ./sbin
-rwxr-xr-x 1 root root 94792 mei 24 20:21 ./sbin/splash_helper
drwxr-xr-x 2 root root 4096 mei 24 20:21 ./sys |
grub.conf:
| Code: | # For booting GNU/Linux
title GNU/Linux
root (hd0,0)
kernel /vmlinuz root=/dev/sda3 hda=ide-scsi video=vesafb:ywrap,pmipal,1600x1200-16@60 splash=silent,theme:gentoo CONSOLE=/dev/tty1
initrd /fbsplash-gentoo-1280x1024 |
I'm using udev, the kernel reports (before the panic):
| Code: | ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF60 irq 18
ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF68 irq 18
ata1: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3c01 87:4003 88:207f
ata1: dev 0 ATA, max UDMA/133, 72303840 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
ata2: SATA port has no device.
scsi1 : ata_piix
Vendor: ATA Model: WDC WD360GD-00FN Rev: 35.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 72303840 512-byte hdwr sectors (37020 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 72303840 512-byte hdwr sectors (37020 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 |
I really don't get it, help!  |
|
Kernel & Hardware
