JDMicklos n00b
Joined: 16 Mar 2004 Posts: 25 Location: Chicago IL
|
Posted: Wed May 25, 2005 3:54 am Post subject: Highpoint r100 |
|
|
I have a highpoint r100 ide controller. I just formated and reinstalled gentoo and the 64 bit 2.6.11-r7 kernel. Before I was running the machine as 32 bit. I can't get the hptr100.ko module that goes with it to insmod properlly. It takes about 3 min to insmod and doesn't work. Here is my dmesg after insmoding
Code: |
...
hpt370: Abort called pid: 316 target: 0 lun: 0 flags: 1 reason 0
hpt370: Abort called pid: 317 target: 0 lun: 0 flags: 1 reason 0
hpt370: Abort called pid: 318 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 316 target: 0 lun: 0 flags: 1
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 16
Buffer I/O error on device sdf, logical block 8
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 48
Buffer I/O error on device sdf, logical block 24
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 0
Buffer I/O error on device sdf, logical block 0
hpt370: Abort called pid: 319 target: 0 lun: 0 flags: 1 reason 0
hpt370: Abort called pid: 320 target: 0 lun: 0 flags: 1 reason 0
hpt370: Abort called pid: 321 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 319 target: 0 lun: 0 flags: 1
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 2
Buffer I/O error on device sdf, logical block 1
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 50
Buffer I/O error on device sdf, logical block 25
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 18
Buffer I/O error on device sdf, logical block 9
hpt370: Abort called pid: 322 target: 0 lun: 0 flags: 1 reason 0
hpt370: Abort called pid: 323 target: 0 lun: 0 flags: 1 reason 0
hpt370: Abort called pid: 324 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 322 target: 0 lun: 0 flags: 1
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 20
Buffer I/O error on device sdf, logical block 10
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 52
Buffer I/O error on device sdf, logical block 26
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 4
Buffer I/O error on device sdf, logical block 2
hpt370: Abort called pid: 325 target: 0 lun: 0 flags: 1 reason 0
hpt370: Abort called pid: 326 target: 0 lun: 0 flags: 1 reason 0
hpt370: Abort called pid: 327 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 325 target: 0 lun: 0 flags: 1
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 6
Buffer I/O error on device sdf, logical block 3
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 54
Buffer I/O error on device sdf, logical block 27
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 22
Buffer I/O error on device sdf, logical block 11
hpt370: Abort called pid: 328 target: 0 lun: 0 flags: 1 reason 0
hpt370: Abort called pid: 329 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 328 target: 0 lun: 0 flags: 1
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 24
Buffer I/O error on device sdf, logical block 12
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 56
Buffer I/O error on device sdf, logical block 28
hpt370: Abort called pid: 330 target: 0 lun: 0 flags: 1 reason 0
hpt370: Abort called pid: 331 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 330 target: 0 lun: 0 flags: 1
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 58
Buffer I/O error on device sdf, logical block 29
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 26
Buffer I/O error on device sdf, logical block 13
hpt370: Abort called pid: 332 target: 0 lun: 0 flags: 1 reason 0
hpt370: Abort called pid: 333 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 332 target: 0 lun: 0 flags: 1
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 28
Buffer I/O error on device sdf, logical block 14
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 60
Buffer I/O error on device sdf, logical block 30
hpt370: Abort called pid: 334 target: 0 lun: 0 flags: 1 reason 0
hpt370: Abort called pid: 335 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 334 target: 0 lun: 0 flags: 1
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 62
Buffer I/O error on device sdf, logical block 31
SCSI error : <3 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 30
Buffer I/O error on device sdf, logical block 15
CLASS: Unregistering class device. ID = '3:0:0:0'
class_hotplug - name = 3:0:0:0
device class '3:0:0:0': release.
bus scsi: remove device 3:0:0:0
PM: Removing info for scsi:3:0:0:0
PM: Removing info for No Bus:target3:0:0
CLASS: Unregistering class device. ID = 'host3'
class_hotplug - name = host3
device class 'host3': release.
PM: Removing info for No Bus:host3
Rocket100 Controller driver
Version 1.0, Compiled May 23 2005 23:14:41
scsi4 : hpt370
DEV: registering device: ID = 'host4'
PM: Adding info for No Bus:host4
CLASS: registering class device: ID = 'host4'
class_hotplug - name = host4
Vendor: WDC WD25 Model: 00JB-00EVA0 Rev: 15.0
Type: Direct-Access ANSI SCSI revision: 00
DEV: registering device: ID = 'target4:0:0'
PM: Adding info for No Bus:target4:0:0
DEV: registering device: ID = '4:0:0:0'
PM: Adding info for scsi:4:0:0:0
bus scsi: add device 4:0:0:0
SCSI device sdf: 488395054 512-byte hdwr sectors (250058 MB)
sdf: asking for cache data failed
sdf: assuming drive cache: write through
SCSI device sdf: 488395054 512-byte hdwr sectors (250058 MB)
sdf: asking for cache data failed
sdf: assuming drive cache: write through
sdf:hpt370: Abort called pid: 344 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 344 target: 0 lun: 0 flags: 1
hpt370: Abort called pid: 345 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 345 target: 0 lun: 0 flags: 1
hpt370: Abort called pid: 346 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 346 target: 0 lun: 0 flags: 1
hpt370: Abort called pid: 347 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 347 target: 0 lun: 0 flags: 1
hpt370: Abort called pid: 348 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 348 target: 0 lun: 0 flags: 1
SCSI error : <4 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 0
Buffer I/O error on device sdf, logical block 0
hpt370: Abort called pid: 349 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 349 target: 0 lun: 0 flags: 1
SCSI error : <4 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 2
Buffer I/O error on device sdf, logical block 1
hpt370: Abort called pid: 350 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 350 target: 0 lun: 0 flags: 1
SCSI error : <4 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 4
Buffer I/O error on device sdf, logical block 2
hpt370: Abort called pid: 351 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 351 target: 0 lun: 0 flags: 1
SCSI error : <4 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 6
Buffer I/O error on device sdf, logical block 3
hpt370: Abort called pid: 352 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 352 target: 0 lun: 0 flags: 1
hpt370: Abort called pid: 353 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 353 target: 0 lun: 0 flags: 1
hpt370: Abort called pid: 354 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 354 target: 0 lun: 0 flags: 1
hpt370: Abort called pid: 355 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 355 target: 0 lun: 0 flags: 1
hpt370: Abort called pid: 356 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 356 target: 0 lun: 0 flags: 1
SCSI error : <4 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 0
Buffer I/O error on device sdf, logical block 0
hpt370: Abort called pid: 357 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 357 target: 0 lun: 0 flags: 1
SCSI error : <4 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 2
Buffer I/O error on device sdf, logical block 1
hpt370: Abort called pid: 358 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 358 target: 0 lun: 0 flags: 1
SCSI error : <4 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 4
Buffer I/O error on device sdf, logical block 2
hpt370: Abort called pid: 359 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 359 target: 0 lun: 0 flags: 1
SCSI error : <4 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 6
Buffer I/O error on device sdf, logical block 3
unable to read partition table
Attached scsi disk sdf at scsi4, channel 0, id 0, lun 0
bound device '4:0:0:0' to driver 'sd'
CLASS: registering class device: ID = '4:0:0:0'
class_hotplug - name = 4:0:0:0
hpt370: Abort called pid: 375 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 375 target: 0 lun: 0 flags: 1
hpt370: Abort called pid: 376 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 376 target: 0 lun: 0 flags: 1
hpt370: Abort called pid: 377 target: 0 lun: 0 flags: 1 reason 0
hpt370: Reset called pid: 377 target: 0 lun: 0 flags: 1
hpt370: Reset called pid: 377 target: 0 lun: 0 flags: 1
scsi: Device offlined - not ready after error recovery: host 4 channel 0 id 0 lun 0
SCSI error : <4 0 0 0> return code = 0x40000
end_request: I/O error, dev sdf, sector 0
FAT: unable to read boot sector
JONATHAN-1 root # vim /etc/fstab
|
Thanks everyone!! _________________ www.WickedTux.com
while(true==true)
{
try
{
I think, therefore I am; //Descartes (duh-cart)
}
catch(yet my karma ran over my dogma)
{
break;
}
}
-Jonathan Micklos |
|