| View previous topic :: View next topic |
| Author |
Message |
Lenz
Veteran
Joined: 17 Jul 2003
Posts: 1439
Location: Marburg [HE, D, EU]
|
 Posted: Fri Jun 03, 2005 8:11 pm Post subject: 'gconf' emergen bricht ab - Hat jemand eine Idee? |
 |
|
Hallo,
ich möchte mir amaroK mit gstreamer Support bauen, welches gconf benötigt. Beim Emergen von gconf bricht er leider ab, die Ursache ist mir leider schleierhaft... Hat jemand von Euch eine Idee, woran das liegen könnte?
| Code: | sulfur /home/lenz # USE="gstreamer -X -xine" emerge amarok
Calculating dependencies ...done!
>>> emerge (1 of 11) gnome-base/gconf-2.8.1-r1 to /
>>> Downloading http://pandemonium.tiscali.de/pub/gentoo/distfiles/GConf-2.8.1.
tar.bz2
--22:05:04-- http://pandemonium.tiscali.de/pub/gentoo/distfiles/GConf-2.8.1.ta
r.bz2
=> `/usr/portage/distfiles/GConf-2.8.1.tar.bz2'
Auflösen des Hostnamen »pandemonium.tiscali.de«.... 195.52.219.14
Verbindungsaufbau zu pandemonium.tiscali.de[195.52.219.14]:80... verbunden.
HTTP Anforderung gesendet, warte auf Antwort... 200 OK
Länge: 1,730,812 [application/x-tar]
100%[===================================>] 1,730,812 84.75K/s ETA 00:00
22:05:35 (57.39 KB/s) - `/usr/portage/distfiles/GConf-2.8.1.tar.bz2' saved [1,7
30,812/1,730,812]
>>> md5 files ;-) ChangeLog
>>> md5 files ;-) gconf-1.0.8-r3.ebuild
>>> md5 files ;-) gconf-1.0.8-r5.ebuild
>>> md5 files ;-) gconf-1.0.9.ebuild
>>> md5 files ;-) gconf-2.10.0.ebuild
>>> md5 files ;-) gconf-2.4.0.1.ebuild
>>> md5 files ;-) gconf-2.6.0.ebuild
>>> md5 files ;-) gconf-2.6.1.ebuild
>>> md5 files ;-) gconf-2.6.2.ebuild
>>> md5 files ;-) gconf-2.8.0.1.ebuild
>>> md5 files ;-) gconf-2.8.1-r1.ebuild
>>> md5 files ;-) gconf-2.9.91.ebuild
>>> md5 files ;-) metadata.xml
>>> md5 files ;-) files/digest-gconf-1.0.8-r3
>>> md5 files ;-) files/digest-gconf-1.0.8-r5
>>> md5 files ;-) files/digest-gconf-2.8.1-r1
>>> md5 files ;-) files/digest-gconf-2.9.91
>>> md5 files ;-) files/gconf-2-locale-c.patch
>>> md5 files ;-) files/gconfd-2-fix.patch
>>> md5 files ;-) files/GConf-2.6.1-gcc2_fix.patch
>>> md5 files ;-) files/gconf-1.0.9-locallock_mdk.patch
>>> md5 files ;-) files/digest-gconf-2.10.0
>>> md5 files ;-) files/digest-gconf-2.6.0
>>> md5 files ;-) files/digest-gconf-2.4.0.1
>>> md5 files ;-) files/digest-gconf-2.6.1
>>> md5 files ;-) files/digest-gconf-2.8.0.1
>>> md5 files ;-) files/digest-gconf-2.6.2
>>> md5 files ;-) files/digest-gconf-1.0.9
>>> md5 src_uri ;-) GConf-2.8.1.tar.bz2
>>> Unpacking source...
>>> Unpacking GConf-2.8.1.tar.bz2 to /var/tmp/portage/gconf-2.8.1-r1/work
* Applying gconf-2-locale-c.patch ... [ ok ]
>>> Source unpacked.
* Patching ${S}/ltmain.sh ...
* Applying portage-1.4.1.patch ...
* Applying max_cmd_len-1.5.0.patch ...
* Applying sed-1.5.6.patch ...
* Applying uClibc/libtool patches ...
* econf: updating GConf-2.8.1/config.guess with /usr/share/gnuconfig/config.guess
* econf: updating GConf-2.8.1/config.sub with /usr/share/gnuconfig/config.sub
./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-gtk-doc
configure: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used.
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
/var/tmp/portage/gconf-2.8.1-r1/work/GConf-2.8.1/missing: Unknown `--run' option
Try `/var/tmp/portage/gconf-2.8.1-r1/work/GConf-2.8.1/missing --help' for more information
configure: WARNING: `missing' script is too old or missing
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for i686-pc-linux-gnu-strip... i686-pc-linux-gnu-strip
checking whether to enable maintainer-specific portions of Makefiles... no
checking for i686-pc-linux-gnu-gcc... i686-pc-linux-gnu-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether i686-pc-linux-gnu-gcc accepts -g... yes
checking for i686-pc-linux-gnu-gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of i686-pc-linux-gnu-gcc... gcc3
checking for i686-pc-linux-gnu-g++... i686-pc-linux-gnu-g++
checking whether we are using the GNU C++ compiler... yes
checking whether i686-pc-linux-gnu-g++ accepts -g... yes
checking dependency style of i686-pc-linux-gnu-g++... gcc3
checking for strerror in -lcposix... no
checking for i686-pc-linux-gnu-gcc option to accept ANSI C... none needed
checking how to run the C preprocessor... i686-pc-linux-gnu-gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for ld used by i686-pc-linux-gnu-gcc... /usr/i686-pc-linux-gnu/bin/ld
checking if the linker (/usr/i686-pc-linux-gnu/bin/ld) is GNU ld... yes
checking for /usr/i686-pc-linux-gnu/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/i686-pc-linux-gnu-nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... i686-pc-linux-gnu-g++ -E
checking for i686-pc-linux-gnu-g77... i686-pc-linux-gnu-g77
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether i686-pc-linux-gnu-g77 accepts -g... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/i686-pc-linux-gnu-nm -B output from i686-pc-linux-gnu-gcc object... ok
checking for objdir... .libs
checking for i686-pc-linux-gnu-ar... i686-pc-linux-gnu-ar
checking for i686-pc-linux-gnu-ranlib... i686-pc-linux-gnu-ranlib
checking for i686-pc-linux-gnu-strip... (cached) i686-pc-linux-gnu-strip
checking if i686-pc-linux-gnu-gcc static flag works... yes
checking if i686-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for i686-pc-linux-gnu-gcc option to produce PIC... -fPIC
checking if i686-pc-linux-gnu-gcc PIC flag -fPIC works... yes
checking if i686-pc-linux-gnu-gcc supports -c -o file.o... yes
checking whether the i686-pc-linux-gnu-gcc linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by i686-pc-linux-gnu-g++... /usr/i686-pc-linux-gnu/bin/ld
checking if the linker (/usr/i686-pc-linux-gnu/bin/ld) is GNU ld... yes
checking whether the i686-pc-linux-gnu-g++ linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes
checking for i686-pc-linux-gnu-g++ option to produce PIC... -fPIC
checking if i686-pc-linux-gnu-g++ PIC flag -fPIC works... yes
checking if i686-pc-linux-gnu-g++ supports -c -o file.o... yes
checking whether the i686-pc-linux-gnu-g++ linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for i686-pc-linux-gnu-g77 option to produce PIC... -fPIC
checking if i686-pc-linux-gnu-g77 PIC flag -fPIC works... yes
checking if i686-pc-linux-gnu-g77 supports -c -o file.o... yes
checking whether the i686-pc-linux-gnu-g77 linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for glib-genmarshal... /usr/bin/glib-genmarshal
FYI: Using default config source xml::${sysgconfdir}/gconf.xml.defaults for schema installation
FYI: Will build with debug checks but no debug spew
checking for pkg-config... /usr/bin/pkg-config
checking for gmodule-2.0 >= 2.0.1 gobject-2.0 >= 2.0.1 ORBit-2.0 >= 2.4.0... yes
checking DEPENDENT_CFLAGS... -DORBIT2=1 -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/orbit-2.0
checking DEPENDENT_LIBS... -Wl,--export-dynamic -pthread -lgobject-2.0 -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0
checking for gmodule-2.0 >= 2.0.1 gobject-2.0 >= 2.0.1 ORBit-2.0 >= 2.4.0 libxml-2.0... yes
checking DEPENDENT_WITH_XML_CFLAGS... -DORBIT2=1 -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/orbit-2.0 -I/usr/include/libxml2
checking DEPENDENT_WITH_XML_LIBS... -Wl,--export-dynamic -pthread -lgobject-2.0 -lORBit-2 -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0 -lxml2 -lpthread -lz -lm
checking for gmodule-2.0 >= 2.0.1 gobject-2.0 >= 2.0.1 ORBit-2.0 >= 2.4.0 gtk+-2.0 >= 2.0.0... yes
checking DEPENDENT_WITH_GTK_CFLAGS... -DORBIT2=1 -pthread -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_API -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/orbit-2.0 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config
checking DEPENDENT_WITH_GTK_LIBS... -Wl,--export-dynamic -pthread -lORBit-2 -lgthread-2.0 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
checking for gmodule-2.0 >= 2.0.1 gobject-2.0 >= 2.0.1 ORBit-2.0 >= 2.4.0 gtk+-2.0 libxml-2.0... yes
checking DEPENDENT_WITH_XML_AND_GTK_CFLAGS... -DORBIT2=1 -pthread -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_API -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/orbit-2.0 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/include/libxml2
checking DEPENDENT_WITH_XML_AND_GTK_LIBS... -Wl,--export-dynamic -pthread -lORBit-2 -lgthread-2.0 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lxml2 -lpthread -lz -lm
checking for poptGetArg in -lpopt... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for usleep... yes
checking for flockfile... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... yes
checking for dgettext in libc... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... /usr/bin/msgfmt
checking for dcgettext... yes
checking for gmsgfmt... /usr/bin/gmsgfmt
checking for xgettext... /usr/bin/xgettext
checking for catalogs to be installed... de
checking for bind_textdomain_codeset... (cached) yes
checking for gawk... (cached) gawk
checking for perl5... no
checking for perl... perl
checking for indent... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating gconf-2.m4
config.status: creating gconf/Makefile
config.status: creating gconf/default.path
config.status: creating backends/Makefile
config.status: creating po/Makefile.in
config.status: creating doc/Makefile
config.status: creating doc/gconf/Makefile
config.status: creating examples/Makefile
config.status: creating tests/Makefile
config.status: creating gconf-2.0.pc
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing default-1 commands
make all-recursive
make[1]: Entering directory `/var/tmp/portage/gconf-2.8.1-r1/work/GConf-2.8.1'
Making all in gconf
make[2]: Entering directory `/var/tmp/portage/gconf-2.8.1-r1/work/GConf-2.8.1/gconf'
/usr/bin/orbit-idl-2 ./GConfX.idl
orbit-idl-2 2.10.3 compiling
mode, show preprocessor errors, passes: stubs skels common headers skel_impl imodule
sh: line 1: indent: command not found
sh: line 1: indent: command not found
sh: line 1: indent: command not found
sh: line 1: indent: command not found
/usr/bin/glib-genmarshal gconfmarshal.list --header --prefix=gconf_marshal > gconfmarshal.h
echo "#include \"gconfmarshal.h\"" > gconfmarshal.c && \
/usr/bin/glib-genmarshal gconfmarshal.list --body --prefix=gconf_marshal >> gconfmarshal.c
make all-am
make[3]: Entering directory `/var/tmp/portage/gconf-2.8.1-r1/work/GConf-2.8.1/gconf'
if /bin/sh ../libtool --mode=compile i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.. -DORBIT2=1 -pthread -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_API -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/orbit-2.0 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/include/libxml2 -DG_LOG_DOMAIN=\"GConf\" -DGCONF_LOCALE_DIR=\""/usr/share/locale"\" -DGCONF_SRCDIR=\""/var/tmp/portage/gconf-2.8.1-r1/work/GConf-2.8.1"\" -DGCONF_CONFDIR=\""/etc/gconf/2"\" -DGCONF_ETCDIR=\""/etc/gconf"\" -DGCONF_BINDIR=\""/usr/bin"\" -DGCONF_SERVERDIR=\""/usr/libexec"\" -DGCONF_BUILDDIR=\"".."\" -DGCONF_BACKEND_DIR=\""/usr/lib/GConf/2"\" -DVERSION=\""2.8.1"\" -DGCONF_ENABLE_INTERNALS=1 -DGCONFD=\""gconfd-2"\" -march=athlon-xp -O3 -pipe -funroll-loops -fomit-frame-pointer -Wall -MT gconf-internals.lo -MD -MP -MF ".deps/gconf-internals.Tpo" \
-c -o gconf-internals.lo `test -f 'gconf-internals.c' || echo './'`gconf-internals.c; \
then mv -f ".deps/gconf-internals.Tpo" ".deps/gconf-internals.Plo"; \
else rm -f ".deps/gconf-internals.Tpo"; exit 1; \
fi
mkdir .libs
i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I.. -DORBIT2=1 -pthread -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_API -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/orbit-2.0 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/include/libxml2 -DG_LOG_DOMAIN=\"GConf\" -DGCONF_LOCALE_DIR=\"/usr/share/locale\" -DGCONF_SRCDIR=\"/var/tmp/portage/gconf-2.8.1-r1/work/GConf-2.8.1\" -DGCONF_CONFDIR=\"/etc/gconf/2\" -DGCONF_ETCDIR=\"/etc/gconf\" -DGCONF_BINDIR=\"/usr/bin\" -DGCONF_SERVERDIR=\"/usr/libexec\" -DGCONF_BUILDDIR=\"..\" -DGCONF_BACKEND_DIR=\"/usr/lib/GConf/2\" -DVERSION=\"2.8.1\" -DGCONF_ENABLE_INTERNALS=1 -DGCONFD=\"gconfd-2\" -march=athlon-xp -O3 -pipe -funroll-loops -fomit-frame-pointer -Wall -MT gconf-internals.lo -MD -MP -MF .deps/gconf-internals.Tpo -c gconf-internals.c -fPIC -DPIC -o .libs/gconf-internals.o
In file included from gconf-internals.c:22:
gconf-internals.h:58: warning: type defaults to `int' in declaration of `ConfigValue'
gconf-internals.h:58: error: syntax error before '*' token
gconf-internals.h:59: error: syntax error before '*' token
gconf-internals.h:59: warning: type defaults to `int' in declaration of `gconf_corba_value_from_gconf_value'
gconf-internals.h:59: warning: data definition has no type or storage class
gconf-internals.h:61: error: syntax error before "ConfigValue"
gconf-internals.h:62: error: syntax error before '*' token
gconf-internals.h:62: warning: type defaults to `int' in declaration of `gconf_invalid_corba_value'
gconf-internals.h:62: warning: data definition has no type or storage class
gconf-internals.h:65: error: syntax error before "ConfigSchema"
gconf-internals.h:66: error: syntax error before '*' token
gconf-internals.h:66: warning: type defaults to `int' in declaration of `gconf_corba_schema_from_gconf_schema'
gconf-internals.h:66: warning: data definition has no type or storage class
gconf-internals.h:67: warning: type defaults to `int' in declaration of `ConfigSchema'
gconf-internals.h:67: error: syntax error before '*' token
gconf-internals.h:69: error: syntax error before "obj"
gconf-internals.h:180: error: syntax error before '*' token
gconf-internals.h:191: error: syntax error before "ConfigServer"
gconf-internals.h:193: error: syntax error before "gconf_get_current_lock_holder"
gconf-internals.h:194: warning: type defaults to `int' in declaration of `gconf_get_current_lock_holder'
gconf-internals.h:194: warning: data definition has no type or storage class
gconf-internals.h:208: error: syntax error before "gconf_orb_get"
gconf-internals.h:208: warning: type defaults to `int' in declaration of `gconf_orb_get'
gconf-internals.h:208: warning: data definition has no type or storage class
gconf-internals.h:210: error: syntax error before "gconf_activate_server"
gconf-internals.h:211: warning: type defaults to `int' in declaration of `gconf_activate_server'
gconf-internals.h:211: warning: data definition has no type or storage class
gconf-internals.c:151: warning: type defaults to `int' in declaration of `ConfigValue'
gconf-internals.c:151: error: syntax error before '*' token
gconf-internals.c: In function `gconf_value_from_corba_value':
gconf-internals.c:156: error: `value' undeclared (first use in this function)
gconf-internals.c:156: error: (Each undeclared identifier is reported only once
gconf-internals.c:156: error: for each function it appears in.)
gconf-internals.c:158: error: `InvalidVal' undeclared (first use in this function)
gconf-internals.c:161: error: `IntVal' undeclared (first use in this function)
gconf-internals.c:164: error: `StringVal' undeclared (first use in this function)
gconf-internals.c:167: error: `FloatVal' undeclared (first use in this function)
gconf-internals.c:170: error: `BoolVal' undeclared (first use in this function)
gconf-internals.c:173: error: `SchemaVal' undeclared (first use in this function)
gconf-internals.c:176: error: `ListVal' undeclared (first use in this function)
gconf-internals.c:179: error: `PairVal' undeclared (first use in this function)
gconf-internals.c:224: error: `BIntVal' undeclared (first use in this function)
gconf-internals.c:227: error: `BBoolVal' undeclared (first use in this function)
gconf-internals.c:230: error: `BFloatVal' undeclared (first use in this function)
gconf-internals.c:233: error: `BStringVal' undeclared (first use in this function)
gconf-internals.c:236: error: `BInvalidVal' undeclared (first use in this function)
gconf-internals.c:255: error: `ConfigValue' undeclared (first use in this function)
gconf-internals.c:255: error: syntax error before ')' token
gconf-internals.c:282: error: syntax error before ')' token
gconf-internals.c:285: error: syntax error before ')' token
gconf-internals.c: At top level:
gconf-internals.c:298: error: syntax error before "ConfigValue"
gconf-internals.c: In function `gconf_fill_corba_value_from_gconf_value':
gconf-internals.c:300: error: `value' undeclared (first use in this function)
gconf-internals.c:302: error: `cv' undeclared (first use in this function)
gconf-internals.c:302: error: `InvalidVal' undeclared (first use in this function)
gconf-internals.c:309: error: `IntVal' undeclared (first use in this function)
gconf-internals.c:313: error: `StringVal' undeclared (first use in this function)
gconf-internals.c:314: warning: implicit declaration of function `CORBA_string_dup'
gconf-internals.c:317: error: `FloatVal' undeclared (first use in this function)
gconf-internals.c:321: error: `BoolVal' undeclared (first use in this function)
gconf-internals.c:325: error: `SchemaVal' undeclared (first use in this function)
gconf-internals.c:334: error: `ListVal' undeclared (first use in this function)
gconf-internals.c:341: warning: implicit declaration of function `CORBA_sequence_ConfigBasicValue_allocbuf'
gconf-internals.c:344: warning: implicit declaration of function `CORBA_sequence_set_release'
gconf-internals.c:349: error: `BIntVal' undeclared (first use in this function)
gconf-internals.c:353: error: `BBoolVal' undeclared (first use in this function)
gconf-internals.c:357: error: `BStringVal' undeclared (first use in this function)
gconf-internals.c:361: error: `BFloatVal' undeclared (first use in this function)
gconf-internals.c:365: error: `BSchemaVal' undeclared (first use in this function)
gconf-internals.c:369: error: `BInvalidVal' undeclared (first use in this function)
gconf-internals.c:379: error: `ConfigValue' undeclared (first use in this function)
gconf-internals.c:379: error: syntax error before ')' token
gconf-internals.c:388: error: `PairVal' undeclared (first use in this function)
gconf-internals.c:398: error: syntax error before ')' token
gconf-internals.c:400: error: syntax error before ')' token
gconf-internals.c: At top level:
gconf-internals.c:414: error: syntax error before '*' token
gconf-internals.c:416: warning: return type defaults to `int'
gconf-internals.c: In function `gconf_corba_value_from_gconf_value':
gconf-internals.c:417: error: `ConfigValue' undeclared (first use in this function)
gconf-internals.c:417: error: `cv' undeclared (first use in this function)
gconf-internals.c:419: warning: implicit declaration of function `ConfigValue__alloc'
gconf-internals.c: At top level:
gconf-internals.c:426: error: syntax error before '*' token
gconf-internals.c:428: warning: return type defaults to `int'
gconf-internals.c: In function `gconf_invalid_corba_value':
gconf-internals.c:429: error: `ConfigValue' undeclared (first use in this function)
gconf-internals.c:429: error: `cv' undeclared (first use in this function)
gconf-internals.c:433: error: `InvalidVal' undeclared (first use in this function)
gconf-internals.c: At top level:
gconf-internals.c:439: error: syntax error before "obj"
gconf-internals.c: In function `gconf_object_to_string':
gconf-internals.c:442: error: `CORBA_Environment' undeclared (first use in this function)
gconf-internals.c:442: error: syntax error before "ev"
gconf-internals.c:446: warning: implicit declaration of function `CORBA_exception_init'
gconf-internals.c:446: error: `ev' undeclared (first use in this function)
gconf-internals.c:448: warning: implicit declaration of function `CORBA_ORB_object_to_string'
gconf-internals.c:448: error: `obj' undeclared (first use in this function)
gconf-internals.c:448: warning: assignment makes pointer from integer without a cast
gconf-internals.c:452: error: `err' undeclared (first use in this function)
gconf-internals.c:461: warning: implicit declaration of function `CORBA_free'
gconf-internals.c: At top level:
gconf-internals.c:467: error: syntax error before "corba_type_from_gconf_type"
gconf-internals.c:468: warning: return type defaults to `int'
gconf-internals.c: In function `corba_type_from_gconf_type':
gconf-internals.c:472: error: `IntVal' undeclared (first use in this function)
gconf-internals.c:474: error: `BoolVal' undeclared (first use in this function)
gconf-internals.c:476: error: `FloatVal' undeclared (first use in this function)
gconf-internals.c:478: error: `InvalidVal' undeclared (first use in this function)
gconf-internals.c:480: error: `StringVal' undeclared (first use in this function)
gconf-internals.c:482: error: `SchemaVal' undeclared (first use in this function)
gconf-internals.c:484: error: `ListVal' undeclared (first use in this function)
gconf-internals.c:486: error: `PairVal' undeclared (first use in this function)
gconf-internals.c: At top level:
gconf-internals.c:494: error: syntax error before "type"
gconf-internals.c: In function `gconf_type_from_corba_type':
gconf-internals.c:496: error: `type' undeclared (first use in this function)
gconf-internals.c:498: error: `InvalidVal' undeclared (first use in this function)
gconf-internals.c:500: error: `StringVal' undeclared (first use in this function)
gconf-internals.c:502: error: `IntVal' undeclared (first use in this function)
gconf-internals.c:504: error: `FloatVal' undeclared (first use in this function)
gconf-internals.c:506: error: `SchemaVal' undeclared (first use in this function)
gconf-internals.c:508: error: `BoolVal' undeclared (first use in this function)
gconf-internals.c:510: error: `ListVal' undeclared (first use in this function)
gconf-internals.c:512: error: `PairVal' undeclared (first use in this function)
gconf-internals.c: At top level:
gconf-internals.c:522: error: syntax error before "ConfigSchema"
gconf-internals.c: In function `gconf_fill_corba_schema_from_gconf_schema':
gconf-internals.c:524: error: `cs' undeclared (first use in this function)
gconf-internals.c:524: error: `sc' undeclared (first use in this function)
gconf-internals.c: At top level:
gconf-internals.c:555: error: syntax error before '*' token
gconf-internals.c:557: warning: return type defaults to `int'
gconf-internals.c: In function `gconf_corba_schema_from_gconf_schema':
gconf-internals.c:558: error: `ConfigSchema' undeclared (first use in this function)
gconf-internals.c:558: error: `cs' undeclared (first use in this function)
gconf-internals.c:560: warning: implicit declaration of function `ConfigSchema__alloc'
gconf-internals.c: At top level:
gconf-internals.c:568: warning: type defaults to `int' in declaration of `ConfigSchema'
gconf-internals.c:568: error: syntax error before '*' token
gconf-internals.c: In function `gconf_schema_from_corba_schema':
gconf-internals.c:576: error: `cs' undeclared (first use in this function)
gconf-internals.c: At top level:
gconf-internals.c:2422: error: syntax error before "read_current_server_and_set_warning"
gconf-internals.c:2424: warning: return type defaults to `int'
gconf-internals.c: In function `read_current_server_and_set_warning':
gconf-internals.c:2436: error: `CORBA_OBJECT_NIL' undeclared (first use in this function)
gconf-internals.c:2468: error: `CORBA_ORB' undeclared (first use in this function)
gconf-internals.c:2468: error: syntax error before "orb"
gconf-internals.c:2469: error: `CORBA_Environment' undeclared (first use in this function)
gconf-internals.c:2470: error: `ConfigServer' undeclared (first use in this function)
gconf-internals.c:2472: error: `ev' undeclared (first use in this function)
gconf-internals.c:2474: error: `orb' undeclared (first use in this function)
gconf-internals.c:2484: error: `server' undeclared (first use in this function)
gconf-internals.c:2484: warning: implicit declaration of function `CORBA_ORB_string_to_object'
gconf-internals.c:2485: warning: implicit declaration of function `CORBA_exception_free'
gconf-internals.c: At top level:
gconf-internals.c:2501: error: syntax error before "read_current_server"
gconf-internals.c:2503: warning: return type defaults to `int'
gconf-internals.c: In function `read_current_server':
gconf-internals.c:2505: error: `ConfigServer' undeclared (first use in this function)
gconf-internals.c:2505: error: syntax error before "server"
gconf-internals.c:2512: error: `server' undeclared (first use in this function)
gconf-internals.c: At top level:
gconf-internals.c:2524: error: syntax error before "ConfigServer"
gconf-internals.c: In function `gconf_get_lock_or_current_holder':
gconf-internals.c:2527: error: `ConfigServer' undeclared (first use in this function)
gconf-internals.c:2527: error: syntax error before "server"
gconf-internals.c:2530: error: `lock_directory' undeclared (first use in this function)
gconf-internals.c:2532: error: `current_server' undeclared (first use in this function)
gconf-internals.c:2533: error: `CORBA_OBJECT_NIL' undeclared (first use in this function)
gconf-internals.c:2538: error: `err' undeclared (first use in this function)
gconf-internals.c:2546: error: `server' undeclared (first use in this function)
gconf-internals.c: At top level:
gconf-internals.c:2725: error: syntax error before "gconf_get_current_lock_holder"
gconf-internals.c:2727: warning: return type defaults to `int'
gconf-internals.c: In function `gconf_get_current_lock_holder':
gconf-internals.c:2729: error: `ConfigServer' undeclared (first use in this function)
gconf-internals.c:2729: error: syntax error before "server"
gconf-internals.c:2732: error: `server' undeclared (first use in this function)
gconf-internals.c: At top level:
gconf-internals.c:2755: error: syntax error before "gconf_orb"
gconf-internals.c:2755: warning: type defaults to `int' in declaration of `gconf_orb'
gconf-internals.c:2755: error: `CORBA_OBJECT_NIL' undeclared here (not in a function)
gconf-internals.c:2755: warning: data definition has no type or storage class
gconf-internals.c:2758: error: syntax error before "gconf_orb_get"
gconf-internals.c:2759: warning: return type defaults to `int'
gconf-internals.c: In function `gconf_orb_get':
gconf-internals.c:2760: error: `CORBA_OBJECT_NIL' undeclared (first use in this function)
gconf-internals.c:2762: error: `CORBA_Environment' undeclared (first use in this function)
gconf-internals.c:2762: error: syntax error before "ev"
gconf-internals.c:2768: error: `ev' undeclared (first use in this function)
gconf-internals.c:2770: warning: implicit declaration of function `CORBA_ORB_init'
gconf-internals.c:2771: error: `CORBA_NO_EXCEPTION' undeclared (first use in this function)
gconf-internals.c: In function `gconf_orb_release':
gconf-internals.c:2784: error: `CORBA_OBJECT_NIL' undeclared (first use in this function)
gconf-internals.c:2786: error: `CORBA_ORB' undeclared (first use in this function)
gconf-internals.c:2786: error: syntax error before "orb"
gconf-internals.c:2787: error: `CORBA_Environment' undeclared (first use in this function)
gconf-internals.c:2791: error: `ev' undeclared (first use in this function)
gconf-internals.c:2793: warning: implicit declaration of function `CORBA_ORB_destroy'
gconf-internals.c:2793: error: `orb' undeclared (first use in this function)
gconf-internals.c:2794: warning: implicit declaration of function `CORBA_Object_release'
gconf-internals.c:2794: error: `CORBA_Object' undeclared (first use in this function)
gconf-internals.c:2794: error: syntax error before "orb"
gconf-internals.c:2796: error: `CORBA_NO_EXCEPTION' undeclared (first use in this function)
gconf-internals.c: At top level:
gconf-internals.c:2863: error: syntax error before "gconf_activate_server"
gconf-internals.c:2865: warning: return type defaults to `int'
gconf-internals.c: In function `gconf_activate_server':
gconf-internals.c:2866: error: `ConfigServer' undeclared (first use in this function)
gconf-internals.c:2866: error: syntax error before "server"
gconf-internals.c:2875: error: `CORBA_Environment' undeclared (first use in this function)
gconf-internals.c:2875: error: syntax error before "ev"
gconf-internals.c:2886: error: `server' undeclared (first use in this function)
gconf-internals.c:2886: error: `CORBA_OBJECT_NIL' undeclared (first use in this function)
gconf-internals.c:2898: error: `ev' undeclared (first use in this function)
gconf-internals.c:2900: warning: implicit declaration of function `CORBA_Object_is_nil'
gconf-internals.c:2902: warning: implicit declaration of function `ConfigServer_ping'
gconf-internals.c:2904: error: `CORBA_NO_EXCEPTION' undeclared (first use in this function)
gconf-internals.c:2910: warning: implicit declaration of function `CORBA_exception_id'
gconf-internals.c:2910: warning: format argument is not a pointer (arg 3)
gconf-internals.c: In function `gconf_CORBA_Object_equal':
gconf-internals.c:2999: error: `CORBA_Environment' undeclared (first use in this function)
gconf-internals.c:2999: error: syntax error before "ev"
gconf-internals.c:3000: error: `CORBA_Object' undeclared (first use in this function)
gconf-internals.c:3004: error: `ev' undeclared (first use in this function)
gconf-internals.c:3005: warning: implicit declaration of function `CORBA_Object_is_equivalent'
gconf-internals.c:3005: error: `_obj_a' undeclared (first use in this function)
gconf-internals.c:3005: error: `_obj_b' undeclared (first use in this function)
gconf-internals.c: In function `gconf_CORBA_Object_hash':
gconf-internals.c:3014: error: `CORBA_Environment' undeclared (first use in this function)
gconf-internals.c:3014: error: syntax error before "ev"
gconf-internals.c:3015: error: `CORBA_Object' undeclared (first use in this function)
gconf-internals.c:3016: error: `CORBA_unsigned_long' undeclared (first use in this function)
gconf-internals.c:3018: error: `ev' undeclared (first use in this function)
gconf-internals.c:3019: error: `retval' undeclared (first use in this function)
gconf-internals.c:3019: warning: implicit declaration of function `CORBA_Object_hash'
gconf-internals.c:3019: error: `_obj' undeclared (first use in this function)
make[3]: *** [gconf-internals.lo] Fehler 1
make[3]: Leaving directory `/var/tmp/portage/gconf-2.8.1-r1/work/GConf-2.8.1/gconf'
make[2]: *** [all] Fehler 2
make[2]: Leaving directory `/var/tmp/portage/gconf-2.8.1-r1/work/GConf-2.8.1/gconf'
make[1]: *** [all-recursive] Fehler 1
make[1]: Leaving directory `/var/tmp/portage/gconf-2.8.1-r1/work/GConf-2.8.1'
make: *** [all] Fehler 2
!!! ERROR: gnome-base/gconf-2.8.1-r1 failed.
!!! Function gnome2_src_compile, Line 41, Exitcode 2
!!! compile failure
!!! If you need support, post the topmost build error, NOT this status message. |
_________________
.:: Lenz' Signature 1.7b ::.
| Gentoo Linux since v1.4 (08-2003) [Screenshot]
| NetHack Highscore: 5.476.380 Pts., Val-Dwa-Fem-Law, ~ ascended to demigoddess-hood ~ |
|
| Back to top |
|
 |
bmuskalla
n00b
Joined: 14 Apr 2005
Posts: 61
Location: Mannheim
|
|
| Back to top |
|
|
Lenz
Veteran
Joined: 17 Jul 2003
Posts: 1439
Location: Marburg [HE, D, EU]
|
| Posted: Fri Jun 03, 2005 8:47 pm Post subject: |
|
|
Hat gefunzt (ja, jetzt bin ich endlich mal in der Lage, dieses Wort zu verwenden  )! Vielen Dank! Muss aber irgendwo ein Bug sein, dass die Abhängigkeit nicht automatisch erfüllt wird.
_________________
.:: Lenz' Signature 1.7b ::.
| Gentoo Linux since v1.4 (08-2003) [Screenshot]
| NetHack Highscore: 5.476.380 Pts., Val-Dwa-Fem-Law, ~ ascended to demigoddess-hood ~ |
|
| Back to top |
|
|
psyeye
Guru
Joined: 06 Dec 2002
Posts: 409
Location: Germany
|
| Posted: Sat Jun 04, 2005 6:01 pm Post subject: |
|
|
| Lenz wrote: | | Hat gefunzt (ja, jetzt bin ich endlich mal in der Lage, dieses Wort zu verwenden )! Vielen Dank! Muss aber irgendwo ein Bug sein, dass die Abhängigkeit nicht automatisch erfüllt wird. |
Schreib doch nen Bug-Report dazu.
Wenn gconf dev-util/indent benötigt, dieses aber nicht im DEPEND im Ebuild steht, dann ist das ein (einfach zu fixender) Bug, der gemeldet werden will. 
psyeye |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
