Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in

  FAQ | Search | Memberlist | Usergroups | Statistics | Profile | Log in to check your private messages | Log in | Register

errore dmesg per usb bluetooth
 View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
kandalf
Apprentice
Apprentice


Joined: 13 Nov 2003
Posts: 261
PostPosted: Tue Jun 07, 2005 8:44 am    Post subject: errore dmesg per usb bluetooth Reply with quote
ha sempre funzionato il mio dispositivo bluettoth ma adesso sembra nn andare...la cosa è il mio dmesg...

Code:

=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

uhci_hcd 0000:00:10.1: suspend_hc
usb 3-1: device descriptor read/64, error -71
hub 3-0:1.0: state 5 ports 2 chg fffc evt 0002
uhci_hcd 0000:00:10.3: suspend_hc
devfs_mk_dev: could not append to parent for vcc/a3
devfs_mk_dev: could not append to parent for vcc/6
devfs_mk_dev: could not append to parent for vcc/a6
devfs_mk_dev: could not append to parent for vcc/a9
devfs_mk_dev: could not append to parent for vcc/a3
devfs_mk_dev: could not append to parent for vcc/5
devfs_mk_dev: could not append to parent for vcc/a5
devfs_mk_dev: could not append to parent for vcc/4
devfs_mk_dev: could not append to parent for vcc/a4
devfs_mk_dev: could not append to parent for vcc/2
devfs_mk_dev: could not append to parent for vcc/a2
devfs_mk_dev: could not append to parent for vcc/3
devfs_mk_dev: could not append to parent for vcc/6
devfs_mk_dev: could not append to parent for vcc/a6
devfs_mk_dev: could not append to parent for vcc/7
devfs_mk_dev: could not append to parent for vcc/a7
eth1: network connection down
eth1: network connection up using port A
    speed:           100
    autonegotiation: yes
    duplex mode:     full
    flowctrl:        symmetric
    irq moderation:  disabled
    scatter-gather:  enabled
atkbd.c: Unknown key pressed (translated set 2, code 0x91 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e011 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x91 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e011 <keycode>' to make it known.
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
hub 5-0:1.0: state 5 ports 8 chg ff00 evt 0020
ehci_hcd 0000:00:10.4: GetStatus port 5 status 001002 POWER sig=se0  CSC
hub 5-0:1.0: port 5, status 0100, change 0001, 12 Mb/s
hub 5-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
hub 3-0:1.0: state 5 ports 2 chg fffc evt 0002
uhci_hcd 0000:00:10.2: port 1 portsc 008a,00
hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
uhci_hcd 0000:00:10.2: suspend_hc
hub 5-0:1.0: state 5 ports 8 chg ff00 evt 0020
ehci_hcd 0000:00:10.4: GetStatus port 5 status 001803 POWER sig=j  CSC CONNECT
hub 5-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
hub 5-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:10.4: port 5 full speed --> companion
ehci_hcd 0000:00:10.4: GetStatus port 5 status 003801 POWER OWNER sig=j  CONNECT
uhci_hcd 0000:00:10.2: wakeup_hc
hub 3-0:1.0: state 5 ports 2 chg fffc evt 0002
uhci_hcd 0000:00:10.2: port 1 portsc 0093,00
hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 3-1: new full speed USB device using uhci_hcd and address 4
uhci_hcd 0000:00:10.2: uhci_result_control: failed with status 440000
[000001003e7dc300] link (3e7dc242) element (3e2f2060)
  0: [000001003e2f2060] link (3e2f20c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=2e760800)
  1: [000001003e2f20c0] link (3e2f2120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=209b5b40)
  2: [000001003e2f2120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 3-1: device descriptor read/64, error -71
uhci_hcd 0000:00:10.2: uhci_result_control: failed with status 440000
[000001003e7dc300] link (3e7dc242) element (3e2f2060)
  0: [000001003e2f2060] link (3e2f20c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=3dda3a80)
  1: [000001003e2f20c0] link (3e2f2120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=209b5b40)
  2: [000001003e2f2120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 3-1: device descriptor read/64, error -71
usb 3-1: new full speed USB device using uhci_hcd and address 5
uhci_hcd 0000:00:10.2: uhci_result_control: failed with status 440000
[000001003e7dc300] link (3e7dc242) element (3e2f2060)
  0: [000001003e2f2060] link (3e2f20c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=3dda3a80)
  1: [000001003e2f20c0] link (3e2f2120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=209b5b40)
  2: [000001003e2f2120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 3-1: device descriptor read/64, error -71
uhci_hcd 0000:00:10.2: uhci_result_control: failed with status 440000
[000001003e7dc300] link (3e7dc242) element (3e2f2060)
  0: [000001003e2f2060] link (3e2f20c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=3dda39c0)
  1: [000001003e2f20c0] link (3e2f2120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=209b5b40)
  2: [000001003e2f2120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 3-1: device descriptor read/64, error -71
hub 3-0:1.0: state 5 ports 2 chg fffc evt 0002
Bluetooth: L2CAP ver 2.6
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
hub 5-0:1.0: state 5 ports 8 chg ff00 evt 0020
ehci_hcd 0000:00:10.4: GetStatus port 5 status 001002 POWER sig=se0  CSC
hub 5-0:1.0: port 5, status 0100, change 0001, 12 Mb/s
hub 5-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
hub 3-0:1.0: state 5 ports 2 chg fffc evt 0002
uhci_hcd 0000:00:10.2: port 1 portsc 008a,00
hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
uhci_hcd 0000:00:10.2: suspend_hc
hub 5-0:1.0: state 5 ports 8 chg ff00 evt 0020
ehci_hcd 0000:00:10.4: GetStatus port 5 status 001803 POWER sig=j  CSC CONNECT
hub 5-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
hub 5-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:10.4: port 5 full speed --> companion
ehci_hcd 0000:00:10.4: GetStatus port 5 status 003801 POWER OWNER sig=j  CONNECT
uhci_hcd 0000:00:10.2: wakeup_hc
hub 3-0:1.0: state 5 ports 2 chg fffc evt 0002
uhci_hcd 0000:00:10.2: port 1 portsc 0093,00
hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 3-1: new full speed USB device using uhci_hcd and address 6
uhci_hcd 0000:00:10.2: uhci_result_control: failed with status 440000
[000001003e7dc300] link (3e7dc242) element (3e2f2060)
  0: [000001003e2f2060] link (3e2f20c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=2937c960)
  1: [000001003e2f20c0] link (3e2f2120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=209b5b40)
  2: [000001003e2f2120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 3-1: device descriptor read/64, error -71
uhci_hcd 0000:00:10.2: uhci_result_control: failed with status 440000
[000001003e7dc300] link (3e7dc242) element (3e2f2060)
  0: [000001003e2f2060] link (3e2f20c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=2937c960)
  1: [000001003e2f20c0] link (3e2f2120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=209b5b40)
  2: [000001003e2f2120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 3-1: device descriptor read/64, error -71
usb 3-1: new full speed USB device using uhci_hcd and address 7
uhci_hcd 0000:00:10.2: uhci_result_control: failed with status 440000
[000001003e7dc300] link (3e7dc242) element (3e2f2060)
  0: [000001003e2f2060] link (3e2f20c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=2937c960)
  1: [000001003e2f20c0] link (3e2f2120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=209b5b40)
  2: [000001003e2f2120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 3-1: device descriptor read/64, error -71
uhci_hcd 0000:00:10.2: uhci_result_control: failed with status 440000
[000001003e7dc300] link (3e7dc242) element (3e2f2060)
  0: [000001003e2f2060] link (3e2f20c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=2937c960)
  1: [000001003e2f20c0] link (3e2f2120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=209b5b40)
  2: [000001003e2f2120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 3-1: device descriptor read/64, error -71
hub 3-0:1.0: state 5 ports 2 chg fffc evt 0002
hub 5-0:1.0: state 5 ports 8 chg ff00 evt 0020
ehci_hcd 0000:00:10.4: GetStatus port 5 status 001002 POWER sig=se0  CSC
hub 5-0:1.0: port 5, status 0100, change 0001, 12 Mb/s
hub 5-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
hub 3-0:1.0: state 5 ports 2 chg fffc evt 0002
uhci_hcd 0000:00:10.2: port 1 portsc 008a,00
hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
uhci_hcd 0000:00:10.2: suspend_hc
hub 5-0:1.0: state 5 ports 8 chg ff00 evt 0004
ehci_hcd 0000:00:10.4: GetStatus port 2 status 001803 POWER sig=j  CSC CONNECT
hub 5-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:10.4: port 2 full speed --> companion
ehci_hcd 0000:00:10.4: GetStatus port 2 status 003801 POWER OWNER sig=j  CONNECT
uhci_hcd 0000:00:10.0: wakeup_hc
hub 1-0:1.0: state 5 ports 2 chg fffc evt 0004
uhci_hcd 0000:00:10.0: port 2 portsc 0093,00
hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb 1-2: new full speed USB device using uhci_hcd and address 2
uhci_hcd 0000:00:10.0: uhci_result_control: failed with status 440000
[000001003f7ba300] link (3f7ba242) element (3f7b9060)
  0: [000001003f7b9060] link (3f7b90c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=3dda3b40)
  1: [000001003f7b90c0] link (3f7b9120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=3d9d4200)
  2: [000001003f7b9120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 1-2: device descriptor read/64, error -71
uhci_hcd 0000:00:10.0: uhci_result_control: failed with status 440000
[000001003f7ba300] link (3f7ba242) element (3f7b9060)
  0: [000001003f7b9060] link (3f7b90c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=3dda3b40)
  1: [000001003f7b90c0] link (3f7b9120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=3d9d4200)
  2: [000001003f7b9120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 1-2: device descriptor read/64, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 3
uhci_hcd 0000:00:10.0: uhci_result_control: failed with status 440000
[000001003f7ba300] link (3f7ba242) element (3f7b9060)
  0: [000001003f7b9060] link (3f7b90c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=3dda3b40)
  1: [000001003f7b90c0] link (3f7b9120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=3d9d4200)
  2: [000001003f7b9120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 1-2: device descriptor read/64, error -71
uhci_hcd 0000:00:10.0: uhci_result_control: failed with status 440000
[000001003f7ba300] link (3f7ba242) element (3f7b9060)
  0: [000001003f7b9060] link (3f7b90c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=3dda3b40)
  1: [000001003f7b90c0] link (3f7b9120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=3d9d4200)
  2: [000001003f7b9120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 1-2: device descriptor read/64, error -71
hub 1-0:1.0: state 5 ports 2 chg fffc evt 0004
hub 5-0:1.0: state 5 ports 8 chg ff00 evt 0004
ehci_hcd 0000:00:10.4: GetStatus port 2 status 001002 POWER sig=se0  CSC
hub 5-0:1.0: port 2, status 0100, change 0001, 12 Mb/s
hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
hub 1-0:1.0: state 5 ports 2 chg fffc evt 0004
uhci_hcd 0000:00:10.0: port 2 portsc 008a,00
hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
uhci_hcd 0000:00:10.0: suspend_hc
hub 5-0:1.0: state 5 ports 8 chg ff00 evt 0020
ehci_hcd 0000:00:10.4: GetStatus port 5 status 001803 POWER sig=j  CSC CONNECT
hub 5-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
hub 5-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:10.4: port 5 full speed --> companion
ehci_hcd 0000:00:10.4: GetStatus port 5 status 003801 POWER OWNER sig=j  CONNECT
uhci_hcd 0000:00:10.2: wakeup_hc
hub 3-0:1.0: state 5 ports 2 chg fffc evt 0002
uhci_hcd 0000:00:10.2: port 1 portsc 0093,00
hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 3-1: new full speed USB device using uhci_hcd and address 8
uhci_hcd 0000:00:10.2: uhci_result_control: failed with status 440000
[000001003e7dc300] link (3e7dc242) element (3e2f2060)
  0: [000001003e2f2060] link (3e2f20c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=2e760d00)
  1: [000001003e2f20c0] link (3e2f2120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=3e535940)
  2: [000001003e2f2120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 3-1: device descriptor read/64, error -71
uhci_hcd 0000:00:10.2: uhci_result_control: failed with status 440000
[000001003e7dc300] link (3e7dc242) element (3e2f2060)
  0: [000001003e2f2060] link (3e2f20c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=2e760f60)
  1: [000001003e2f20c0] link (3e2f2120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=3e535940)
  2: [000001003e2f2120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 3-1: device descriptor read/64, error -71
usb 3-1: new full speed USB device using uhci_hcd and address 9
uhci_hcd 0000:00:10.2: uhci_result_control: failed with status 440000
[000001003e7dc300] link (3e7dc242) element (3e2f2060)
  0: [000001003e2f2060] link (3e2f20c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=2e760f60)
  1: [000001003e2f20c0] link (3e2f2120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=3f7bf680)
  2: [000001003e2f2120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 3-1: device descriptor read/64, error -71
uhci_hcd 0000:00:10.2: uhci_result_control: failed with status 440000
[000001003e7dc300] link (3e7dc242) element (3e2f2060)
  0: [000001003e2f2060] link (3e2f20c0) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=2e760f60)
  1: [000001003e2f20c0] link (3e2f2120) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=3f7bf680)
  2: [000001003e2f2120] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 3-1: device descriptor read/64, error -71
hub 3-0:1.0: state 5 ports 2 chg fffc evt 0002
[/quote]
[quote]
_________________
live free or die
Back to top
View user's profile Send private message
skakz
Guru
Guru


Joined: 03 Jul 2004
Posts: 380
Location: Ischia/Napoli/Italia/Terra
PostPosted: Tue Jun 07, 2005 8:30 pm    Post subject: Reply with quote
la butto lì: prova a usare un'altra porta usb. se non funziona prova a levare e rimettere il trasmettitore bluetooth aspetta 10 secondi dai il comando dmesg e posta il risultato
_________________
Linux Registered User n.340423
Linux User Group Ischia
www.tush.it
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



 Links: forums.gentoo.org | www.gentoo.org | bugs.gentoo.org | wiki.gentoo.org | forum-mods@gentoo.org

Copyright 2001-2024 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy