| View previous topic :: View next topic |
| Author |
Message |
Raftysworld
Apprentice
Joined: 27 Feb 2005
Posts: 236
Location: Snohomish, WA
|
 Posted: Sun May 15, 2005 3:53 pm Post subject: [SOLVED] ATI Radeon 9600 XOrg help |
 |
|
I've got a 9600, and I've never had problems in the past with enabling 3D acceleration, until my latest re-install. I followed the instructions from the gentoo-wiki, just as i've always done, and I can't figure out the problem. Here's all relevant info
dmesg:
| Code: | [fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
[fglrx:firegl_unlock] *ERROR* Process 9240 using kernel context 0
allocation failed: out of vmalloc space - use vmalloc=<size> to increase size.
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
[fglrx:firegl_unlock] *ERROR* Process 3649 using kernel context 0
allocation failed: out of vmalloc space - use vmalloc=<size> to increase size.
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
[fglrx:firegl_unlock] *ERROR* Process 3707 using kernel context 0
|
xorg.log:
| Code: | (II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf9eb0000
(II) fglrx(0): [drm] mapped SAREA 0xf9eb0000 to 0xb7d1a000
(II) fglrx(0): [drm] framebuffer handle = 0xe0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.12.10
(II) fglrx(0): Date: Apr 4 2005
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.11-gentoo-r8
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xff8f0000
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENOMEM"
(EE) fglrx(0): cannot init AGP
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xf9eb0000 at 0xb7d1a000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
|
and my xorg.conf:
| Code: | # === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4150
Screen 0
EndSection
|
Last edited by Raftysworld on Sun May 15, 2005 5:17 pm; edited 1 time in total |
|
| Back to top |
|
 |
slashdevslashtty
Tux's lil' helper
Joined: 29 Aug 2004
Posts: 119
Location: 97219
|
| Posted: Sun May 15, 2005 5:07 pm Post subject: |
|
|
Try adding: | Code: | | Option "KernelModuleParm" "agplock=0" |
after the ForceGenericCPU line. |
|
| Back to top |
|
|
Raftysworld
Apprentice
Joined: 27 Feb 2005
Posts: 236
Location: Snohomish, WA
|
| Posted: Sun May 15, 2005 5:16 pm Post subject: |
|
|
| slashdevslashtty wrote: | Try adding: | Code: | | Option "KernelModuleParm" "agplock=0" |
after the ForceGenericCPU line. |
Thanks! (Solved) |
|
| Back to top |
|
|
chukaman
n00b
Joined: 16 Sep 2004
Posts: 9
Location: Johannesburg, South Africa
|
| Posted: Fri Jun 24, 2005 9:28 am Post subject: |
|
|
| slashdevslashtty wrote: | Try adding: | Code: | | Option "KernelModuleParm" "agplock=0" |
after the ForceGenericCPU line. |
You people are like saviours!!
Thanks so much 
_________________
# charles leaver
# obsidian switch (pty) ltd.
# charles@switch-it.co.za |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
