emerge sparc-sources problem

adam666 · n00b Joined: 26 Jun 2005 Posts: 3

Hi,

Im having trouble when I get to this stage of installation in my sparc64 install in my ultra5 machine

following std sparc install manual instructions I get to:

emerge sparc-sources
File"/usr/bin/emerge", line 2951
if (("--pretend" In myopts) and not ("--fetchonly" in myopts or "--fetch-all-uri" in myopts)) or ("--ask" in myopts):
.........................^ [dots just to put arrow in right place]

SyntaxError: Invalid syntax

also, I beleive the first time I tried to run 'emerge sparc-sources' it had MD5 errors in a file....

...second time running it went a a few lines through with no problem then came up file was corrupt (may have been main gentoo-sparc64.tar.bz2 file?)
and to try -tvv to verify contents or ??bziprestore?? to recover non corrupted portions of file?

....third run it came up with this line # error

I even re-burned the CD *slowly* to make sure was sweet but still giving error # 3 now

:roll:

Thanks in advance
Adam

Deathwing00 · Posted: Sun Jun 26, 2005 11:45 am Post subject:

Moved from Installing Gentoo to Gentoo on Sparc.

adam666 · n00b Joined: 26 Jun 2005 Posts: 3

Does anyone have any ideas?

I have done everything 'exactly' as laid out in installation handbook

The error says:

syntax error - does this mean I need to find the error in the emerge file?

Ive looked at the line in question but it looks ok

PLEASE HELP

Thanks in advance
Adam

gust4voz · Posted: Thu Jun 30, 2005 11:45 am Post subject:

Are you using hdparm to set parameters for the hdd/cdrom?
Are there any kernel messages ("dmesg") at the end when this happens?
The IDE chipsets in the ultra 5, ultra 10, blade 100 and blade 150 are buggy and can cause trouble in many situations using DMA.
If you're not just try booting like "gentoo-2.4 ide=nodma" to see if it helps.
_________________
Gustavo Zacarias
Gentoo/SPARC monkey

Ferris · Posted: Thu Jun 30, 2005 12:40 pm Post subject:

What version of portage is that? If your message really reads ' if (("--pretend" In myopts) and ...' then that is a problem, if course, because that ln needs to be in. If that is what you have, and you didn't just copy it wrong, I suppose you could correct it by hand and continue, but I don't see how such a problem could occur. If you really are seeing it, you probably should follow up with gustavoz's thoughts as well.

Hope this helps, but it probably doesn't,
Regards,

adam666 · n00b Joined: 26 Jun 2005 Posts: 3

Thanks guys,

gust4voz: no, I didnt set any special HD params AFAIK, only what the handbook said to do.

will try booting with nodma

ferris: latest version of portage? yes, that was typed "exactly"as displayed. and my first thought was , hmm syntax error, ill go fix it. but when I find that line in the 'emerge' file, it is written as 'in' with lowercase 'i'

thanks
Adam